Conformational transition of the core chain in radiation-modified polysilane micelles formed in selective solvents

Poly(methyl acrylate)-grafted poly(methyl-n-propylsilane) (PMPrS-g-PMA) and poly(acrylic acid)-grafted PMPrS (PMPrS-g-PAA) were synthesized by gamma-ray-induced graft polymerization, and the association behavior of these graft copolymers was investigated in selective solvents composed of good and poor solvents for the PMPrS main chain. Fluorescence spectroscopy with perylene as a fluorescent probe revealed that PMPrS-g-PAA in a water/THF mixed solvent self-assembles into micelles with a swollen core of PMPrS chains in the water content range of 50-95%. UV spectroscopy demonstrated that a further increase of the water content gives rise to the conformational transition of the PMPrS chains in the micelle core from the random conformation to the conformation that corresponds to that in the solid state at a water content of ca. 95%, independent of the grafting yield. Similar behavior was also observed in DMSO/THF solutions of PMPrS-g-PMA, for which the conformational transition occurred at the constant DMSO content of ca. 95%. These results indicate that solvatochromic behavior of polysilane, which is a characteristic feature of polysilane, proved to provide information on the inner structure of those micelles: PMPrS chains in the core undergo conformational transition as the content of the poor solvents for PMPrS increases, while maintaining the micelle structure.     

聚甲基丙烯酸甲酯接枝聚氧乙烯共聚物溶液性质的研究

采用核磁共振 (NMR)、动态激光光散射 (DLS)、透射电子显微镜 (TEM )等方法研究了规整性聚甲基丙烯酸甲酯接枝聚氧乙烯共聚物溶液性质 ,研究表明两亲接枝共聚物在选择性溶剂中可形成球状胶束 ,溶液的浓度、温度和聚合物结构等因素影响其胶束的大小、形态     

Synthesis and micellization of amphiphilic poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride) block copolymers

Amphiphilic biodegradable block copolymers [poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride)] were synthesized by the melt polycondensation of poly(ethylene glycol) and sebacic anhydride prepolymers. The chemical structure, crystalline nature, and phase behavior of the resulting copolymers were characterized with ¹H NMR, Fourier transform infrared, gel permeation chromatography, and differential scanning calorimetry. Microphase separation of the copolymers occurred, and the crystallinity of the poly(sebacic anhydride) (PSA) blocks diminished when the sebacic anhydride unit content in the copolymer was only 21.6%. ¹H NMR spectra carried out in CDCl₃ and D₂O were used to demonstrate the existence of hydrophobic PSA domains as the core of the micelle. In aqueous media, the copolymers formed micelles after precipitation from water‐miscible solvents. The effects on the micelle sizes due to the micelle preparation conditions, such as the organic phase, dropping rate of the polymer organic solution into the aqueous phase, and copolymer concentrations in the organic phase, were studied. There was an increase in the micelle size as the molecular weight of the PSA block was increased. The diameters of the copolymer micelles were also found to increase as the concentration of the copolymer dissolved in the organic phase was increased, and the dependence of the micelle diameters on the concentration of the copolymer varied with the copolymer composition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1271–1278, 2006     

Aggregate morphologies of amphiphilic graft copolymers in dilute solution studied by self-consistent field theory

Microstructures assembled by amphiphilic graft copolymers in a selective solvent (poor for the backbone chain and good for graft chains or poor for graft chains and good for the backbone chain) were investigated on the basis of a real-space algorithm of self-consistent field theory in two-dimensions. Circle-like micelles, line-like micelles, large compound micelles, and vesicles are obtained by tailoring the architectural parameters and interaction parameter between the graft blocks and solvents. The aggregate morphology stability regions of graft copolymers as functions of the position of first graft point and the number of branches are constructed. It is found that the architectural parameters play a remarkable role in the complex microstructure formation. The interaction between the graft blocks and solvents is also shown to exert an effect on the morphology stability regions. The distributions of the free end and inner blocks of the backbone are found to be different in various aggregate structures. For the circle-like micelles assembled by graft copolymers with a hydrophobic backbone and vesicles assembled by graft copolymers with a hydrophilic backbone, the free end and inner blocks segregate and localize in different parts of the aggregates depending on their length. However, with respect to the large compound micelles and vesicles assembled by graft copolymers with a hydrophobic backbone, the free end and inner blocks uniformly mix in the clusters.     

Effects of a lysophosphatidylcholine and a phosphatidylcholine on the morphology of taurocholic acid-based mixed micelles as determined by small-angle X-ray scattering

We previously showed that Caco-2 cell absorption of β-carotene from taurocholic acid (TA)-based mixed micelles differed depending on the composition of the micelles. In this study, the shapes and sizes of TA-based mixed micelles, that is, mixed micelles of TA, 1-oleoyl-rac-glycerol (MG), oleic acid (OLA), and either 1-palmitoyl-sn-glycero-3-phosphocholine (MPPC; i.e., a lysophospholipid) or 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC; i.e., a phospholipid) (60:3:1:0.75–12) were determined by using small-angle X-ray scattering (SAXS). We found that increasing the ratio of MPPC in mixed micelles of TA, MG, OLA, and MPPC was responsible for the previously observed enhanced β-carotene absorption by Caco-2 cells and changed the micelle shape from core–shell spherical to core–shell ellipsoidal. In contrast, increasing the ratio of POPC in mixed micelles of TA, MG, OLA, and POPC was responsible for the suppressed β-carotene absorption by the cells, changed the micelle shape from core–shell spherical to core–shell ellipsoidal to core–shell cylindrical, and caused a rapid increase in micelle volume. These results will be useful for understanding the mechanisms that mediate β-carotene absorption by cells and for developing technologies to improve the intestinal absorption of lipophilic components of drugs and nutrients.     

Successful preferential formation of a novel macromolecular assembly--trilayered polymeric micelle--that can incorporate hydrophilic compounds: the optimization of factors affecting the micelle formation from amphiphilic block copolymers

We have developed a novel macromolecular assembly, trilayered polymeric micelle, which can incorporate hydrophilic compounds. The micelle can be prepared from the amphiphilic block copolymers without regard to their properties such as the copolymer's charges and the homogeneity of the copolymers forming the micelle's inner and outer parts. In this study, we investigated the optimal condition for the preferential formation of the trilayered polymeric micelle. GPC results clarified that the composition of the block copolymer, the concentration of PVA in the aqueous bulk phase, and the temperature during the preparation were the important preparation factors affecting preferential formation of the trilayered polymeric micelles. We successfully achieved the preferential formation of the trilayered polymeric micelles under optimal conditions. Furthermore, we confirmed that the model hydrophilic compound, FITC-dextran, was successfully encapsulated into the hydrophilic core of the trilayered polymeric micelles. The novel micelle that can incorporate hydrophilic compounds can have a variety of future medical applications such as a protein delivery-based therapy.     

多分散性对两亲性两嵌段共聚物在选择性溶剂中自组装行为影响的Monte Carlo模拟

采用Monte Carlo模拟方法研究了多分散性AB两亲性两嵌段共聚物在选择性溶剂中的自组装行为.模拟结果表明,嵌段共聚物的多分散性对体系在选择性溶剂中自组装所形成的胶束形貌结构有很大影响.当AB两嵌段共聚物的多分散系数由1.0增加至1.4时,体系中自组装所形成的胶束将会发生由囊泡到片层直至球状的一系列形态转变.通过统...     

Block copolymer micelles as nanoreactors for single‐site polymerization catalysts

New micelle‐like organic supports for single site catalysts based on the self‐assembly of polystyrene‐b‐poly(4‐vinylbenzoic acid) block copolymers have been designed. These block copolymers were synthesized by sequential atom transfer radical polymerization (ATRP) of styrene and methyl 4‐vinylbenzoate, followed by hydrolysis. As evidenced by dynamic light scattering, self‐assembly in toluene that is a selective solvent of polystyrene, induced the formation of micelle‐like nanoparticles composed of a poly(4‐vinylbenzoic acid) core and a polystyrene corona. Further addition of trimethylaluminium (TMA) afforded in situ MAO‐like species by diffusion of TMA into the core of the micelles and its subsequent reaction with the benzoic acid groups. Such reactive micelles then served as nanoreactors, MAO‐like species being efficient activators of 2,6‐bis[1‐{(2,6‐diisopropylphenyl)imino}ethyl]pyridinyl iron toward ethylene polymerization. These new micelle‐like organic supports enabled the production of polyethylene beads with a spherical morphology and a high bulk density through homogeneous‐like catalysis. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 197–209, 2009     

A theory of swollen hollow micelles of diblock copolymers in selective solvents

Micellization behavior of diblock copolymers in selective solvent near the critical micelle temperature (c.m.t.) is theoretically studied focusing our attention to that the core must be swollen with the solvent near c.m.t. Supposing a micellar solution of core–corona type spherical micelles with swollen hollow cores, we calculate the association number distribution and the micelle structure at equilibrium in terms of controlling parameters, i.e. intrinsic interfacial tensions (γ_eff0 and γ_AS0) for core/corona and core/solvent interfaces, and core-segment/solvent interaction parameter χ_AS. Infinitely-large micelle region (ILM-Region), where the micelle size is divergent, is found at smaller values of γ_AS0 and χ_AS other than micelle and unimer regions. In the micelle region near ILM-Region, the micelle size and the degree of swelling become extremely large as ILM-Region is approached, while the micelles become very compact far away from ILM-Region. By investigating the micellar behavior with increasing the association strength on a particular trace in the χ_AS−γ_eff0−γ_AS0 space, it is demonstrated that large swollen hollow micelles are easily formed near c.m.t., and then sharply change to be more compact micelles with decreasing solvent quality to core blocks. This is exactly similar to the so-called anomalous micellization experimentally observed near c.m.t.     

Study of hierarchical microstructures self-assembled by π-shaped ABC block copolymers in dilute solution using self-consistent field theory

Microstructures self-assembled by amphiphilic ABC π-shaped block copolymers in dilute solution have been investigated by self-consistent field theory. The effects of architectural parameters and the interaction strength among the three blocks have been studied systematically. Our calculation results show that the distance of the two graft blocks has stronger effect than the length of graft blocks and the position of the first graft point on the phase behavior. The interaction strength among the three blocks is another important factor in controlling the resulting microstructures. Compound-core, multicompartment, and multicore micelles are observed in the case of π-shaped ABC block copolymers with hydrophilic backbone block A and hydrophobic graft blocks B and C. Core-shell-corona, incomplete skin-layered and hamburger micelles are formed when graft block C is hydrophilic and blocks A and B are hydrophobic. The wormlike multicore micelles have drawn our attention. We find that the morphology of wormlike multicore micelle can be controlled by changing the distance of the two graft blocks of the π-shaped block copolymers. In all of the wormlike multicore micelles, the streamline wormlike micelle is more stable than other wormlike micelles from the free energy analysis.     

Morphologies of star-block copolymers in dilute solutions

The morphologies of star-block copolymer (AB)n and (BA)n in a selective solvent for A-block are investigated by using dissipative particle dynamics. For a star-block copolymer of (BA)n type with a large enough arm number n, since the solvophobic B-blocks are situated in the inner part of the star, it behaves as a unimolecular micelle with the B-block core and A-block hairy corona. These types of star copolymers repel each other, thus it is quite difficult to form multimolecular micelles. On the other hand, for a star-block copolymer of (AB)n type, a few aggregative domains develop on the outer rim of the molecule. As the length of B-blocks or the repulsive interaction between B-blocks and solvents is increased, the tendency of B-blocks to associate within the star increases and thus the average number of aggregative domains declines. Owing to the exposure of B-domains, (AB)n type star-blocks tend to form micelles with morphology different from typical micelles. Upon performing simulations for solutions with multiple stars, we have shown that the single molecular conformation may greatly affect the resulting morphology of the supramolecular structure, such as connected-star aggregate, multicore micelle, segmented worm, and core-lump micelle.     

Effect of Increasing Concentration of Each of Three Polar Solvents (1,4-Dioxane, Dimethyl Sulfoxide, N,N-Dimethylformamide) on Changes in the Shape of Polysorbate 20 Micelles

The effect of increasing concentration of each of three polar solvents [0–40 % (v/v) 1,4-dioxane, 0–40 % (v/v) dimethyl sulfoxide (DMSO), and 0–60 % (v/v) N,N-dimethylformamide (DMF)] on changes in the shape of the surfactant polysorbate 20 (Tween 20) micelles in the aqueous, polar solvent, sodium phosphate buffer solutions (pH = 7.2, ionic strength 2.44 mmol·L^?1) were investigated by using small-angle X-ray scattering. The effect of increasing concentration of 1,4-dioxane is that the micelle shape changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 10 and 20 % (v/v) 1,4-dioxane, and then from core–shell disc micelles to core–shell elliptic disc micelles between concentrations of 30 and 40 % (v/v) 1,4-dioxane. The effect of increasing concentration of DMSO is that the micelles changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 0 and 10 % (v/v) DMSO. The effect of increasing concentration of DMF is that it changed the core–shell cylindrical micelles to core–shell disc micelles between concentrations of 30 and 40 % (v/v) DMF. The common effect is that the solvents shortened the height of the micelle, that is, they squashed the micelle. Moreover, the specific effect of 1,4-dioxane is that this solvent squashed and squeezed the micelle.     

Water-dispersible, uniform nanospheres by heating-enabled micellization of amphiphilic block copolymers in polar solvents

Uniform nanospheres with tunable size down to 30 nm were prepared simply by heating amphiphilic block copolymers in polar solvents. Unlike reverse micelles prepared in nonpolar, oily solvents, these nanospheres have a hydrophilic surface, giving them good dispersibility in water. Furthermore, they are present as individual, separated, rigid particles upon casting from the solution other than continuous thin films of merged micelles cast from micellar solution in nonpolar solvents. These nanospheres were generated by a heating-enabled micellization process in which the affinity between the solvent and the polymer chains as well as the segmental mobility of both hydrophilic and hydrophobic blocks was enhanced, triggering the micellization of the glassy copolymers in polar solvents. This heating-enabled micellization produces purely well-defined nanospheres without interference of other morphologies. The micelle sizes and corona thickness are tunable mainly by changing the lengths of the hydrophobic and hydrophilic blocks, respectively. The heating-enabled micellization route for the preparation of polymeric nanospheres is extremely simple, and is particularly advantageous in producing rigid, micellar nanospheres from block copolymers with long glassy, hydrophobic blocks which are otherwise difficult to prepare with high efficiency and purity. Furthermore, encapsulation of hydrophobic molecules (e.g., dyes) into micelle cores could be integrated into the heating-enabled micellization, leading to a simple and effective process for dye-labeled nanoparticles and drug carriers.     

Block copolymers of styrene and n‐alkyl methacrylates with long alkyl groups. Micellization behavior in selective solvents

The micellization properties of well‐defined block copolymers of styrene and decyl methacrylate (SDMA) were studied in two different solvents, methyl acetate (MAc) selective for the polystyrene (PS) block and dodecane, selective for the poly(decyl methacrylate) (PDMA) block. The results were compared with those obtained, in the same solvents, from block copolymers of styrene and stearyl methacrylate (SSMA). In MAc, SDMA copolymers with a decyl methacrylate (DMA) content of 15% or less formed unimolecular micelles, whereas those with a content of 18.5% or higher formed multimolecular micelles. The degrees of association were lower than the corresponding SSMA samples. In dodecane, SDMA form large, monodisperse, spherical, and thermally stable micelles with degrees of association higher than the corresponding SSMA samples. The different behaviors can be attributed to the steric hindrance effect and the ability of the long alkyl groups of the polymethacrylate, MA blocks to crystallize. When the MA blocks are in the soluble corona of the micelles, the steric hindrance effect prevails, thus leading to higher degrees of association for the less bulky alkyl group. In the case where the MA block is in the insoluble core of the micelles, the higher the tendency for crystallization the higher the degree of association. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4177–4188, 2004     

A microfluidic platform for integrated synthesis and dynamic light scattering measurement of block copolymer micelles

Microfluidic devices were developed that integrate the synthesis of well defined block copolymers and dynamic light scattering (DLS) measurement of their micelle formation. These metal devices were designed to operate in contact with organic solvents and elevated temperatures for long periods, and thus were capable of continuous in-channel atom transfer radical polymerization (ATRP) of styrene and (meth)acrylate homopolymers and block copolymers. These devices were equipped with a miniaturized fiber optic DLS probe that included several technology improvements, including a measurement volume of only 4 microlitres, simple alignment, and reduced multiple scattering. To demonstrate the integrated measurement, poly(methyl methacrylate-b-lauryl methacrylate) and poly(methyl methacrylate-b-octadecyl methacrylate) block copolymers were processed on the device with a selective solvent, dodecane, to induce micelle formation. The in situ DLS measurements yielded the size and aggregation behavior of the micelles. For example, the block copolymer solutions formed discrete micelles (D(H) approximately = 25 nm) when the corona block was sufficiently long (f(MMA) < 0.51), but the micelles aggregated when this block was short. This study demonstrates the utility of these new devices for screening the solution behavior of custom synthesized polymeric surfactants and additives.     

Cononsolvency-induced micellization of pyrene end-labeled diblock copolymers of N-isopropylacrylamide and oligo(ethylene glycol) methyl ether methacrylate

Pyrene end-labeled double hydrophilic diblock copolymers, poly(N-isopropylacrylamide)-b-poly(oligo(ethylene glycol) methyl ether methacrylate) (Py-PNIPAM-b-POEGMA), were synthesized via consecutive reversible addition-fragmentation chain transfer polymerization using a pyrene-containing dithioester as the chain transfer agent. These diblock copolymers molecularly dissolve in pure methanol and water, but form well-defined and nearly monodisperse PNIPAM-core micelles in an appropriate mixture of them due to the cononsolvency of PNIPAM block. 1H NMR, laser light scattering, fluorescence spectroscopy, and transmission electron microscopy were employed to characterize the cononsolvency-induced PNIPAM-core micelles. When the volume fraction of water, phi water, in the methanol/water mixture is in the range of 0.5-0.8, the sizes of micelles are in the range of 20-30 nm in radius for Py-PNIPAM50-b- POEGMA18. At phi water = 0.5, the formed micelles possess the highest overall micelle density and the largest molar mass. The effects of varying the block lengths of Py-PNIPAM-b-POEGMA diblock copolymers on the structural parameters of PNIPAM-core micelles have also been explored. Although we can observe the immediate appearance of bluish tinge upon mixing the diblock copolymer solution in methanol with equal volume of water (phi water = 0.5), which is characteristic of the formation of micellar aggregates, the whole micellization process apparently takes a relatively long time to complete, as revealed by monitoring the time dependence of fluorescence emission spectra. The excimer/monomer fluorescence intensity ratios, IE/IM, continuously decrease with time and then reach a plateau value after approximately 20 min. The decrease of IE/IM after the initial formation of pseudo-equilibrium micelles should be ascribed to the structural rearrangement and further packing of PNIPAM segments within the micelle core, restricting the mobility of pyrene end groups and decreasing the probability of contact between them. Compared to the conventional cosolvent approach employed for the micellization of block copolymers in selective solvents, the reported cononsolvency-induced unimer-micelle-unimer transition of Py-PNIPAM-b-POEGMA in methanol/water mixtures has been unprecedented.     

Noncovalently connected micelles based on a β‐cyclodextrin‐containing polymer and adamantane end‐capped poly(ε‐caprolactone) via host–guest interactions

New random copolymers, poly(N‐vinyl‐2‐pyrrolidone‐co‐mono‐6‐deoxy‐6‐methacrylate ethylamino‐β‐cyclodextrin) (PnvpCD) bearing pendent β‐cyclodextrin (CD) groups were synthesized. PnvpCD formed soluble graft‐like polymer complex with adamantane (AD) end‐capped poly(ε‐caprolactone) (PclAD) in their common solvent N‐methyl‐2‐pyrrolidone driven by the inclusion interactions between the CD and AD groups. The formation of the graft complex has been confirmed by viscometry, dynamic light scattering (DLS), and isothermal titration calorimeter. The graft complex self‐assembled further into noncovalently connected micelles in water, which is a selective solvent for the main chain PnvpCD. Transmission electron microscopy, DLS, and atomic force microscopy have been used to investigate the structure and morphology of the resultant micelles. A unique “multicore” structure of the micelles, in which small PclAD domains scattered within the micelles, was obtained under nonequilibrium conditions in the preparation. However, the micelles prepared in a condition close to equilibrium possess an ordinary core‐shell structure. In both cases, the core and shell are believed to be connected by the AD‐CD inclusion complexation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4267–4278, 2009     

Synthesis and characterization of temperature‐sensitive block‐graft PNiPAAm‐b‐(PαN3CL‐g‐alkyne) copolymers by ring‐opening polymerization and click reaction

This study synthesized thermo‐sensitive amphiphilic block‐graft PNiPAAm‐b‐(PαN₃CL‐g‐alkyne) copolymers through ring‐opening polymerization of α‐chloro‐ε‐caprolactone (αClCL) with hydroxyl‐terminated macroinitiator poly(N‐isopropylacrylamide) (PNiPAAm), substituting pendent chlorides with sodium azide. This was then used to graft various kinds of terminal alkynes moieties by means of the copper‐catalyzed Huisgen's 1,3‐dipolar cycloaddition (“click” reaction). ¹H NMR, FTIR, and gel permeation chromatography (GPC) was used to characterize these copolymers. The solubility of the block‐graft copolymers in aqueous media was investigated using turbidity measurement, revealing a lower critical solution temperature (LCST) in the polymers. These solutions showed reversible changes in optical properties: transparent below the LCST, and opaque above the LCST. The LCST values were dependant on the composition of the polymer. With critical micelle concentrations (CMCs) in the range of 2.04–9.77 mg L^?1, the block copolymers formed micelles in the aqueous phase, owing to their amphiphilic characteristics. An increase in the length of hydrophobic segments or a decrease in the length of hydrophilic segments amphiphilic block‐graft copolymers produced lower CMC values. The research verified the core‐shell structure of micelles by ¹H NMR analyses in D₂O. Transmission electron microscopy was used to analyze the morphology of the micelles, revealing a spherical structure. The average size of the micelles was in the range of 75–145 nm (blank), and 105–190 nm (with drug). High drug entrapment efficiency and drug loading content were observed in the drug micelles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polymer micelles with crystalline cores for thermally triggered release

Interest in the use of poly(ethylene glycol)-b-polycaprolactone diblock copolymers in a targeted, magnetically triggered drug delivery system has led to this study of the phase behavior of the polycaprolactone core. Four different diblock copolymers were prepared by the ring-opening polymerization of caprolactone from the alcohol terminus of poly(ethylene glycol) monomethylether, M(n) ≈ 2000. The critical micelle concentration depended on the degree of polymerization for the polycaprolactone block and was in the range of 2.9 to 41 mg/L. Differential scanning calorimetry curves for polymer solutions with a concentration above the critical micelle concentration showed a melting endotherm in the range of 40 to 45 °C, indicating the polycaprolactone core was semicrystalline. Pyrene was entrapped in the micelle core without interfering with the ability of the polycaprolactone to crystallize. When the polymer solution was heated above the melting point of the micelle core, the pyrene was free to leave the core. Temperature-dependent measurements of the critical micelle concentration and temperature-dependent dynamic light scattering showed that the micelles remain intact at temperatures above the melting point of the polycaprolactone core.     

Synthesis and self‐assembling of poly(N‐isopropylacrylamide‐block‐poly(L‐lactide)‐block‐poly(N‐isopropylacrylamide) triblock copolymers prepared by combination of ring‐opening polymerization and atom transfer radical polymerization

Novel thermo‐responsive poly(N‐isopropylacrylamide)‐block‐poly(l ‐lactide)‐block‐poly(N‐isopropylacylamide) (PNIPAAm‐b‐PLLA‐b‐PNIPAAm) triblock copolymers were successfully prepared by atom transfer radical polymerization of NIPAAm with Br‐PLLA‐Br macroinitiator, using a CuCl/tris(2‐dimethylaminoethyl) amine (Me₆TREN) complex as catalyst at 25 °C in a N,N‐dimethylformamide/water mixture. The molecular weight of the copolymers ranges from 18,000 to 38,000 g mol^?1, and the dispersity from 1.10 to 1.28. Micelles are formed by self‐assembly of copolymers in aqueous medium at room temperature, as evidenced by ¹H NMR, dynamic light scattering (DLS) and transmission electron microscopy (TEM). The critical micelle concentration determined by fluorescence spectroscopy ranges from 0.0077 to 0.016 mg mL^?1. ¹H NMR analysis in selective solvents confirmed the core‐shell structure of micelles. The copolymers exhibit a lower critical solution temperature (LCST) between 32.1 and 32.8 °C. The micelles are spherical in shape with a mean diameter between 31.4 and 83.3 nm, as determined by TEM and DLS. When the temperature is raised above the LCST, micelle size increases at high copolymer concentrations due to aggregation. In contrast, at low copolymer concentrations, decrease of micelle size is observed due to collapse of PNIPAAm chains. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3274–3283