聚酰亚胺/聚丙烯腈共混黑膜的制备及其结构与性能

采用共混的方法制备聚酰胺酸/聚丙烯腈(PAA/PAN)共混溶液.其中2种PAA溶液分别由二酐(3,3′,4,4′-联苯二酐(BPDA)与均苯四甲酸二酐(PMDA))和二胺(对苯二胺(PDA)与4,4′-二氨基二苯醚(ODA))均聚或共聚而得,N,N-二甲基乙酰胺(DMAc)为溶剂,PAN溶于DMAc中制成溶液后与PAA溶液混合,涂膜后热处理制得聚酰亚胺(PI)/PAN共混薄膜.分析了PAA和PAN在热处理过程中的变化,以及PAN的加入量对共混薄膜的结构与性能的影响.结果表明,在热处理过程中,PAA完成了亚胺化成为PI,而PAN完成了预氧化,形成了稳定的梯形结构,制备出具有良好力学性能、黑色、不透光的薄膜,但是随着PAN含量的增加,体系发生明显的相分离,薄膜力学性能有所下降,(BPDA/PDA/ODA)PI中加入10%的PAN和(PMDA/ODA)PI中加入20%的PAN时能获得具有良好力学性能的黑色、低透光率的薄膜.     

炭黑的“impurity-free”改性及其在聚酰亚胺薄膜中的分散特性研究

利用聚酰胺酸(PAA)在研磨过程形成炭黑(CB)的"impurity-free"分散剂制备纳米CB填充聚酰亚胺(PI)高性能复合薄膜.球磨CB和PAA/N-甲基-2-吡咯烷酮(NMP)溶液的混合液,PAA在研磨过程中降解形成活性分子,原位生成与CB表面具有反应活性和强烈物理吸附能力的"impurity-free"分散剂.拉曼、红外以及紫外-可见光吸收光谱证实了降解PAA分子对CB的改性作用.经改性的CB与PAA溶液共混,涂覆固化制备PI/CB复合薄膜.TEM照片表明该分散剂可以显著促进CB粒子在PI基体中的均匀分散,分散粒径约为200nm.力学性能测试和导电性能测试表明PI/CB复合薄膜的断裂伸长率大幅提高,电阻率(ρ)重复性浮动范围从2个数量级降到1个数量级.进一步研究发现,研磨过程中添加高分子量PAA更有利于CB在PI基体中的均匀分散.     

聚丙烯酸控制合成的聚合物/二氧化硅复合纳米球

以3-氨丙基三甲氧基硅烷(APMS)和正硅酸乙酯(TEOS)为硅源, 与阴离子聚合物聚丙烯酸(PAA)链之间通过S^-N⁺-I^-机理组装合成了聚丙烯酸-二氧化硅(PAA/SiO₂)复合纳米球. SEM, TEM, TG和FTIR表征结果表明, 合成的纳米球是聚丙烯酸和二氧化硅复合物, 平均直径约为80 nm. 在合成PAA/SiO₂复合纳米球的体系中, 加入不同量的有机溶剂THF能够调控复合球的尺度.     

氢键给体和受体对纤维素醚复合薄膜后处理的影响研究

纤维素醚是一类水溶性大分子,它可以作为氢键受体和聚丙烯酸(PAA)形成氢键复合物。利用层层组装的方法制备出羟乙基纤维素(HEC)与PAA的界面复合薄膜,选取氢键给体单宁酸(TA)和氢键受体甲基纤维素(MC)、羟丙基纤维素(HPC)、聚乙烯吡咯烷酮(PVPON)溶液分别对薄膜进行浸泡后处理。研究表明浸泡后处理是一个动态的过程,会改变薄膜的厚度和组成,对于薄膜的实际应用具有指导意义,为多组分复合薄膜的制备提供了新思路。     

多组分高分子复合物纤维的制备与性能调控

多组分是实现纤维性能提升和调控的有效手段.利用传统方法制备的多组分纤维,不同高分子之间很难达到分子层面相容.高分子复合物是不同高分子高度相容的聚集组装体系.本工作研究聚氧化乙烯(PEO)、聚乙烯醇(PVA)和聚丙烯酸(PAA) 3种组分制备复合物纤维.利用红外光谱、X射线衍射、示差扫描量热、扫描电子显微镜和力学拉伸等方法分别表征氢键复合、纤维的聚集态结构和力学性质.研究结果表明,PEO/PVA/PAA纤维不同组分高度相容,通过改变纤维中组分的含量,可以实现对多组分复合物纤维的性能调控.纤维中柔性PEO组分含量增加,可以实现由塑性到弹性的转变,并且纤维在湿度场下表现出形状记忆与可修复行为.     

微相分离结合氢键复合构筑弹性体

通过嵌段聚合物的微相分离和高分子氢键复合,使用聚苯乙烯-b-聚丙烯酸-b-聚苯乙烯(SAS)三嵌段聚合物和聚氧化乙烯(PEO)均聚物构筑了具有多层次结构的弹性体(SA/E).聚丙烯酸(PAA)与PEO形成柔性的氢键复合物(PAA/PEO),刚性的聚苯乙烯(PS)与PAA和PEO不相容而发生微相分离,PS作为交联点连接着柔性的PAA/PEO.与PAA/PEO氢键复合物相比,SA/E弹性体力学性能明显提升,通过控制PS质量分数可调节弹性体的模量和强度等力学性能. SA/E弹性体表现出湿度敏感性.并且弹性体经拉伸训练后可获得一定的取向性,弹性回复率保持在98%以上.本弹性体在湿度传感、柔性器件、医用材料等领域具有潜在应用,为构筑新型弹性体提供思路.     

PAA/PU合金制备多孔PI薄膜及结构与性能研究

以N,N-二甲基乙酰胺(DMAc)为溶剂, 在聚氨酯(PU)溶液中使均苯四酸二酐(PMDA)与4,4′-二氨基二苯醚(4,4′-ODA)缩聚成聚酰亚胺(PI)预聚体聚酰胺酸(PAA), 从而制成PAA/PU的混合溶液, 然后刮涂成膜, 经过热处理使得PAA亚胺化和PU降解, 制备多孔PI薄膜. 通过对薄膜进行红外光谱,热失重分析及透射电镜(TEM)观察, 结果表明, 最佳的PU热降解温度为360 ℃, PU降解后在PI基体中留下长条状纳米孔, 且孔径大小随聚氨酯含量的增加而增大. 通过对薄膜进行力学性能、 介电性能和吸水率研究, 结果表明, 随着体系中PU用量的增加, 热处理后的多孔PI薄膜的介电常数逐渐下降, 但拉伸强度降低, 吸水率上升.     

PAM-PAA microgel inverse opal photonic crystal and pH response

The colloidal crystal template or opal with a closed-packed face-centered cubic (fcc) lattice was prepared from monodisperse polystyrene (PS) spheres by vertical sedimentation.The template provided void space for infiltration of monomer precursor composed of acrylate acid,acrylamide and ammonium persulfate,as well as microgel from the subsequent copolymerization.The sample was immersed in dimethylbenzene for completely removing PS spheres to form PAM inverse opal hydrogels (IOH_(PAM)) or PAM/PAA inverse opal hydrogels (IOH_(PAM/PAA)) photonic crystals.The PS spheres were replaced by air spheres,which interconnected each other through the windows.The study of responses to pH show that there are two peaks for both IOH_(PAM) and IOH_(PAM/PAA) films,but the IOH(PAM/PAA) peaks shift to higher pH,and the peaks are independent with the AA content. (?)2007 Xiao Dong Wang.Published by Elsevier B.V.on behalf of Chinese Chemical Society.All rights reserved.     

PVA微晶交联和SA/PAA双网络协效增强增韧SA纤维

为了提高海藻酸钠(SA)纤维的断裂强度和断裂伸长率, 以丙烯酸(AA)为化学交联组分, SA为离子交联组分, 聚乙烯醇(PVA)为微晶交联组分, 采用湿法纺丝和冻融循环方法制备含有PVA微晶交联点和海藻酸钠/聚丙烯酸(SA/PAA)双网络结构的海藻酸钠/聚丙烯酸/聚乙烯醇(SA/PAA/PVA)复合纤维. 通过流变性能、 力学性能、 红外光谱、 X射线衍射仪(XRD)和扫描电子显微镜(SEM)测试研究了交联剂N,N-亚甲基双丙烯酰胺(MBA)含量和PVA微晶交联对SA/PAA/PVA纺丝原液和复合纤维的结构与性能的影响. 结果表明, 当MBA质量分数为0.5%时, 纺丝原液的损耗模量(G″)最小, 可纺性最好, 复合纤维的断裂强度达到2.83 cN/dtex, 断裂伸长率达到9.38%, 比再生SA纤维分别提高了15.98%和38.96%; PVA冷冻之后形成微晶交联点并且PAA和PVA已经复合到体系中; PAA和PVA的加入提高了复合纤维的结晶度; 复合纤维的表面形貌趋于光滑和规整, 纤维断面更加致密.     

聚丙烯酸/氧化石墨烯-壳聚糖复合膜的制备及其对染料的吸附分离

利用层层组装技术,将聚丙烯酸(PAA)与氧化石墨烯-壳聚糖(GO-CS)复合物沉积到聚丙烯(PP)微孔膜表面制备聚丙烯酸/氧化石墨烯-壳聚糖(PAA/GO-CS)_n复合膜,并考察其对亚甲基蓝和刚果红吸附分离效果。利用红外光谱、热分析仪和扫描电子显微镜进行表征,结果表明,通过静电力和氢键相互作用,GO和CS成功复合,制备的(PAA/GO-CS)_n复合膜具有稳定的热化学性质,复合膜的表面形貌和孔隙可以通过组装层数进行调控。研究发现,(PAA/GO-CS)_n复合膜对亚甲基蓝和刚果红的渗透率随组装层数增加而下降,截留率随组装层数增加呈上升趋势,复合膜对带正电荷的亚甲基蓝具有优先选择吸附性。当组装层数达20层时,(PAA/GO-CS)_n复合膜对亚甲基蓝的渗透率为2761.3 L·m^-2·h^-1·bar^-1,截留率91%,吸附率39%,对刚果红的渗透率为3068 L·m^-2·h^-1·bar^-1...     

聚丙烯酸/聚氧化乙烯高分子复合溶液的结构与粘度

通过溶液折光指数和粘度测定,研究了聚丙烯酸（ＰＡＡ）与聚氧化乙烯（ＰＥＯ）高分子链间在复合溶液中的相互作用和ＰＡＡ／ＰＥＯ高分子氢键复合溶液的结构与粘度,研究了复合溶液粘度随溶液ｐＨ值的变化规律及不同浓度时剪切速率对复合溶液粘度和复合增粘效果的影响。结果表明：ＰＡＡ／ＰＥＯ复合溶液结构不同于ＰＡＡ和ＰＥＯ两组分聚合物溶液结构,ＰＡＡ与ＰＥＯ高分子链间的氢键相互作用形成构象更为伸展、流体力学体积列大     

Peculiarities of Formation of Intermolecular Polycomplexes Based on Polyacrylamide,Poly(vinyl alcohol) and Poly(ethylene oxide)

The phenomenon of self-assembly of aggregates formed by relatively short chains of poly(vinyl alcohol) (PVA) on the long macromolecules of polyacrylamide (PAA) in aqueous medium are discussed. PVA and PAA form intermolecular polycomplexes (InterPC) of a constant composition independently on a ratio of polymer components. The complex formation between high-molecular-weight PAA and relatively low-molecular-weight poly(ethylene oxide) (PEO) are considered also. PEO with M ⩽ 4·10⁴ g.mol⁻¹ weakly interacts with PAA. The polymer-polymer interaction can be intensified when the part of amide groups (∼20 mol %) on PAA chain to transform into the carboxylic groups. InterPCs formed by PEO and initial or modified PAA have associative structure with friable packing of the polymer segments. They are stabilized by the hydrogen bond system.     

Polymer-Based Superhydrophobic Coating Fabricated from Polyelectrolyte Multilayers of Poly(allylamine hydrochloride) and Poly(acrylic acid)

Superhydrophobic films mainly based on poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) polyelectrolyte multilayer have been deposited onto cleaned glass substrate by a layer-by-layer dip coating method. 3 bilayers of the PAH and PAA was directly coated onto the substrate as an underlying layer for subsequent coating. Desired surface roughness on the polyelectrolyte bilayers was created by etching the bilayers in hydrochloric acid solution so as to create the open pore having suitable size at the surface. Then, nanoparticles such as SiO₂ and TiO₂ of various sizes were deposited onto the etched polyelectrolyte bilayers. Finally, the surfaces were further modified with semifluorinated silane followed by cross-linking at 180 °C for 2 h to obtain desirable surface morphological features. The effect of etching time and addition of nanoparticles on surface morphology was investigated using an atomic force microscope (AFM). Wetting ability of the prepared film was determined by measuring water droplet contact angle using a goniometer. Adhesion between the superhydrophobic films and the substrate was evaluated by using a standard tape test method (D3359). The adhesion was improved by reducing the organic content in the films.     

聚丙烯酸环境响应行为的研究

采用介观动力学分子模拟(Mesodyn)和耗散颗粒动力学(DPD)分子模拟与流变等实验技术相结合的方法, 研究了pH/无机盐敏感聚合物聚丙烯酸PAA在水溶液中的环境响应行为, 考察了聚合物浓度、溶液离子强度、聚合物表面电荷对PAA相行为的影响. 实验结论与模拟结果符合得很好, 对照分析给出了聚丙烯酸的环境响应机制, 为设计和应用环境敏感的智能体系提供指导和理论依据.     

Application of Ultrasonic Attenuation Measurements in the Studies on Macromolecular Conformational Behaviors

——Phase Behavior of the Aqueous Solution of Poly(vinyl methyl ether) Sensitive to Temperature and the Modification of the Behavior by Using Poly(acrylic acid) The phase behavior of the aqueous solution of poly(vinyl methyl ether) (PVME) sensitive to temperature and the modification of the behavior by using poly(acrylic acid) (PAA) have been studied by ultrasonic attenuation measurements and fluorescence probe techniques. It has been observed that PVME solution is transparent at room temperature and becomes turbid upon heating. The solution turns clear again as soon as the temperature is decreased to room temperature. The heating and cooling process can be repeated for many times. The phase behavior of the solution sensitive to temperature is attributed to the conformational changes of the polymer. PVME may adopt an open coil conformation at room temperature. With this conformation, the polymer is well miscible with the solvent, water, and thereby the system is a real solution. The polymer may adopt a compact coil conformation when the temperature is higher than a specific value, which is called the LCST (the lower critical solution temperature) of PVME. In this case, the polymer tangles to each other and forms various aggregates, which can scatter incident light and ultrasonic waves greatly, resulting in the phase separation. Introduction of PAA decreases the temperature sensitivity of the phase behavior of the polymer. The nature of the inhibition is attributed to the complexation of PAA with PVME and the strong hydrophilicity of PAA. Results from fluorescence probe studies are in accordance with those from ultrasonic attenuation measurements, indicating again that the ultrasonic attenuation method can be successfully used for the qualitative studies of polymer conformations and complexation between polymers.     

聚丙烯酰胺/蒙脱土纳米复合物-聚乙烯醇共混膜的制备及其渗透汽化性能

用原位聚合法制备聚丙烯酰胺/蒙脱土(PAM/MMT)纳米复合材料, 通过透射电镜研究了蒙脱土在聚丙烯酰胺基体中的形貌和分布. 结果表明, 蒙脱土以片层结构分布在聚合物基体中. 用超声波分散聚乙烯醇和聚丙烯酰胺-蒙脱土共混铸膜液制得共混膜, 用红外吸收光谱和扫描电镜研究了两者的相互作用和形貌. 考察了共混膜在异丙醇-水混合溶液中的溶胀吸附性能及共混比和蒙脱土含量对膜分离性能的影响, 结果显示, 聚乙烯醇膜中添加适量的蒙脱土纳米粒子可以大大改善膜的分离选择性.     

Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution

Poly(lactic acid)(PLA)is one of the most important bio-plastics,and chemical modification of the already-polymerized poly(lactic acid)chains may enable optimization of its material properties and expand its application areas.In this study,we demonstrated that poly(lactic acid)can be readily dissolved in acrylic acid at room temperature,and acrylic acid can be graft-polymerized onto poly(lactic acid)chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet(UV)irradiation.Similar photo-grafting polymerization of acrylic acid(PAA)has only been studied before in the surface modification of polymer films.The graft ratio could be controlled by various reaction parameters,including irradiation time,benzophenone content,and monomer/polymer ratios.This photo-grafting reaction resulted in high graft ratio(graft ratio PAA/PLA up to 180%)without formation of homopolymers of acrylic acid.When the PAA/PLA graft ratio was higher than 100%,the resulting PLA-g-PAA polymer was found dispersible in water.The pros and cons of the photo-grafting reaction were also discussed.     

Structure and pH‐sensitive properties of poly (vinylidene fluoride) membrane changed by blending poly (acrylic acid) microgels

pH‐sensitive poly (vinylidene fluoride) (PVDF)/poly (acrylic acid) (PAA) microgels membranes are prepared by phase inversion of the N, N‐dimethylformamide solution containing PAA microgels and PVDF in aqueous solution. The composition and structure of the blend membrane are investigated by Fourier transform infrared spectra, X‐ray photoelectron spectroscopy measurements, thermo gravimetric analysis, field‐emission scanning electron microscope and atomic force microscope. The results indicate the surface and cross section of the blend membranes have a porous structure with PAA microgels immobilized inside the pore and on the membrane surface. The blend PVDF membranes exhibit pH‐sensitive water flux, with the most drastic change in permeability observed between pH 3.7 and 6.3. The blend membranes are fouled by bovine serum albumin, and their antifouling property is enhanced by increasing PAA microgels, mainly derived from the improved hydrophilic property. Copyright © 2013 John Wiley & Sons, Ltd.     

聚甲基丙烯酸甲酯与聚醋酸乙烯酯共混的红外光谱研究

用红外光谱(FTIR)研究了聚甲基丙烯酸甲酯(PMMA)与聚醋酸乙烯酯(PVAc)共混体系相容性,在160℃以上共混体系发生相分离;分相体系与非分相体系的FTIR谱明显不同;共混体系的FTIR谱不能从两统组分红外光谱简单加和得到;结果表明大分子构象发生了变化,PMMA/PVAc体系相容可能是大分子构象熵变所致。     

Preparation of Latexes with Poly(Methyl Methacrylate) Cores and Hydrophilic Polymer Shells Containing Amino Groups

Abstract

Functional latexes with poly(methyl methacrylate) (PMMA) cores and amino‐containing, water‐soluble polymer shells were synthesized via direct graft copolymerization of methyl methacrylate from water‐soluble polymers induced by a small amount of tert‐butyl hydroperoxide (TBHP) at 80°C for 2 h. Amphiphilic graft copolymers and PMMA homopolymers were generated concurrently to form highly monodispersed latexes. The effects of water‐soluble polymer containing different amino group, reaction temperature, TBHP concentration, molecular weight of the polymer and pH of the solution on conversion and grafting efficiency of the monomer and particle size were investigated. Transmission electron microscopic images of the PMMA/poly(ethyleneimine) (PEI) and PMMA/poly(allylamine) (PAA) particles clearly show well‐defined core‐shell morphologies, where PMMA cores are coated with either PEI or PAA shell. The amino‐containing polymer shells were also confirmed with zeta‐potential measurements. Furthermore, the amino‐containing latexes can be produced with a solids content up to 22 wt.%. Thus, this method provides a commercially viable route to functional latexes.