Miniaturized electrochemical sensors and their point-of-care applications

Most of the current analytical methods depend largely on laboratory-based analytical techniques that require expensive and bullky equipment,potentially incur costly testing,and involve lengthy detection processes.With increasing requirements for point-of-care testing(POCT),more attention has been paid to miniaturized analytical devices.Miniaturized electrochemical(MEC)sensors,including different material-based MEC sensors(such as DNA-,paper-,and screen electrode-based),have been in strong demand in analytical science due to their easy operation,portability,high sensitivity,as well as their short analysis time.They have been applied for the detection of trace amounts of target through measuring changes in electrochemical signal,such as current,voltage,potential,or impedance,due to the oxidation/reduction of chemical/biological molecules with the help of electrodes and electrochemical units.MEC sensors present great potential for the detection of targets including small organic molecules,metal ions,and biomolecules.In recent years,MEC sensors have been broadly applied to POCT in various fields,including health care,food safety,and environmental monitoring,owing to the excellent advantages of electrochemical(EC)technologies.This review summarized the state-of-the-art advancements on various types of MEC sensors and their applications in POCT.Furthermore,the future perspectives,opportunities,and challenges in this field are also discussed.     

Machine Learning towards Screening Solid-state Lithium Ion Conductors

Machine learning is an emerging method to discover new materials with specific characteristics.An unsupervised machine learning research is highlighted to discover new potential lithium ionic conductors by screening and clustering lithium compounds,providing inspirations for the development of solid-state electrolytes and practical batteries.     

Surface defect-rich ceria quantum dots anchored on sulfur-doped carbon nitride nanotubes with enhanced charge separation for solar hydrogen production

Designing defect-engineered semiconductor heterojunctions can effectively promote the charge carrier separation.Herein,novel ceria(CeO2) quantum dots(QDs) decorated sulfur-doped carbon nitride nanotubes(SCN NTs) were synthesized via a thermal polycondensation coupled in situ depositionprecipitation method without use of template or surfactant.The structure and morphology studies indicate that ultrafine CeO2 QDs are well distributed inside and outside of SCN NTs offering highly dispersed active sites and a large contact interface between two components.This leads to the promoted formation of rich Ce³⁺ ion and oxygen vacancies as confirmed by XPS.The photocatalytic performance can be facilely modulated by the content of CeO2 QDs introduced in SCN matrix while bare CeO2 does not show activity of hydrogen production.The optimal catalyst with 10% of CeO2 loading yields a hydrogen evolution rate of 2923.8 μmol h-1 g-1 under visible light,remarkably higher than that of bare SCN and their physical mixtures.Further studies reveal that the abundant surface defects and the created 0 D/1 D junctions play a critical role in improving the separation and transfer of charge carriers,leading to superior solar hydrogen production and good stability.     

Superfast and solvent-free core-shell assembly of sulfur/carbon active particles by hail-inspired nanostorm technology for high-energy-density Li-S batteries

The demand on low-carbon emission fabrication technologies for energy storage materials is increasing dramatically with the global interest on carbon neutrality.As a promising active material for metal-sulfur batteries,sulfur is of great interest due to its high-energy-density and abundance.However,there is a lack of industry-friendly and low-carbon fabrication strategies for high-performance sulfur-based active particles,which,however,is in critical need by their practical success.Herein,based on a hail-inspired sulfur nano-storm(HSN)technology developed in our lab,we report an energy-saving,solvent-free strategy for producing core-shell sulfur/carbon electrode particles(CNT@AC-S)in minutes.The fabrication of the CNT@AC-S electrode particles only involves low-cost sulfur blocks,commercial carbon nanotubes(CNT)and activated carbon(AC)micro-particles with high specific surface area.Based on the above core-shell CNT@AC-S particles,sulfur cathode with a high sulfur-loading of 9.2 mg cm^-2 delivers a stable area capacity of 6.6 mAh cm^-2 over 100 cycles.Furthermore,even for sulfur cathode with a super-high sulfur content(72 wt%over the whole electrode),it still delivers a high area capacity of 9 mAh cm^-2 over50 cycles in a quasi-lean electrolyte condition.In a nutshell,this study brings a green and industryfriendly fabrication strategy for cost-effective production of rationally designed S-rich electrode particles.     

Unraveling the stabilization mechanism of solid electrolyte interface on ZnSe by rGO in sodium ion battery

Transition metal selenides have been widely studied as anode materials of sodium ion batteries(SIBs),however,the investigation of solid-electrolyte-interface(SEI)on these materials,which is critical to the electrochemical performance of SIBs,remains at its infancy.Here in this paper,ZnSe@C nanoparticles were prepared from ZIF-8 and the SEI layers on these electrodes with and without reduced graphene oxide(rGO)layers were examined in details by X-ray photoelectron spectroscopies at varied charged/discharged states.It is observed that fast and complicated electrolyte decomposition reactions on ZnSe@C leads to quite thick SEI film and intercalation of solvated sodium ions through such thick SEI film results in slow ion diffusion kinetics and unstable electrode structure.However,the presence of rGO could efficiently suppress the decomposition of electrolyte,thus thin and stable SEI film was formed.ZnSe@C electrodes wrapped by rGO demonstrates enhanced interfacial charge transfer kinetics and high electrochemical performance,a capacity retention of 96.4%,after 1000 cycles at 5 A/g.This study might offer a simple avenue for the designing high performance anode materials through manipulation of SEI film.     

常温常湿条件下Au/MeO~x催化剂上CO氧化性能

利用共沉淀法制备了Au/MeO~x催化剂(Me=Al,Co,Cr,Cu,Fe,Mn,Ni,Zn)。在常温常湿条件下,考察了不同氧化物负载的金基催化剂的CO氧化性能。结果表明,氧化物种类对催化剂的活性和稳定性均有较大的影响。Cu,Mn,Cr等氧化物负载的金基催化剂的活性较差,而Zn,Fe,Co,Ni,Al等金属氧化物负载的金基催化剂可将CO完全氧化,又具有一定的稳定性,在相同反应条件下,CO完全转化时的稳定性顺序为Au/ZnO>Au/α-Fe~2O~3>Au/Co~3O~4>Au/γ-Al~2O~3≈Au/NiO。还发现水对Au/MnO~x催化剂的活性和稳定性有负作用,而对180℃焙烧制备的Au/ZnO-180催化剂的活性和稳定性均有明显的湿度增强作用。     

CXN天然沸石的研究2: 吸附性质

采用N~2,NH~3,CO~2,乙烯,丙烯,水,甲醇,乙醇,丙醇等作为吸附剂,研究了由我国CXN天然沸石改性制得的H-STI和Na-STI沸石的吸附性质,H-STI和Na-STI沸石的BET表面积及微孔孔体积约为420m^2/g和0.20m^3/g。根据NH~3和CO~2在H-STI沸石上的吸附等温线计算得到它们的吸附热分别为44.8和26.5kJ/mol。乙烯,丙烯,甲醇,乙醇,丙醇等在Na-STI沸石上的吸附等温线表明该沸石对有机分子的吸附具有链长选择性。在低分压下水相对于甲醇的吸附量表明沸石具有一定的疏水性质。     

Regulation of carbon distribution to construct high-sulfur-content cathode in lithium-sulfur batteries

Lithium-sulfur(Li-S)battery is regarded as one of the most promising next-generation energy storage systems due to the ultra-high theoretical energy density of 2600 Wh kg^-1.To address the insulation nature of sulfur,nanocarbon composition is essential to afford acceptable cycling capacity but inevitably sacrifices the actual energy density under working conditions.Therefore,rational structural design of the carbon/sulfur composite cathode is of great significance to realize satisfactory electrochemical performances with limited carbon content.Herein,the cathode carbon distribution is rationally regulated to construct high-sulfur-content and high-performance Li-S batteries.Concretely,a double-layer carbon(DLC)cathode is prepared by fabricating a surface carbon layer on the carbon/sulfur composite.The surface carbon layer not only provides more electrochemically active surfaces,but also blocks the polysulfide shuttle.Consequently,the DLC configuration with an increased sulfur content by nearly 10 wt%renders an initial areal capacity of 3.40 mAh cm^-2 and capacity retention of 83.8%during 50 cycles,which is about two times than that of the low-sulfur-content cathode.The strategy of carbon distribution regulation affords an effective pathway to construct advanced high-sulfur-content cathodes for practical high-energy-density Li-S batteries.     

Boost oxygen reduction reaction performance by tuning the active sites in Fe-N-P-C catalysts

Cost-effective atomically dispersed Fe-N-P-C complex catalysts are promising to catalyze the oxygen reduction reaction(ORR)and replace Pt catalysts in fuel cells and metal-air batteries.However,it remains a challenge to increase the number of atomically dispersed active sites on these catalysts.Here we report a highly efficient impregnation-pyrolysis method to prepare effective ORR electrocatalysts with large amount of atomically dispersed Fe active sites from biomass.Two types of active catalyst centers were identified,namely atomically dispersed Fe sites and Fe_xP particles.The ORR rate of the atomically dispersed Fe sites is three orders of magnitude higher than it of Fe_xP particles.A linear correlation between the amount of the atomically dispersed Fe and the ORR activity was obtained,revealing the major contribution of the atomically dispersed Fe to the ORR activity.The number of atomically dispersed Fe increases as the Fe loading increased and reaching the maximum at 1.86 wt%Fe,resulting in the maximum ORR rate.Optimized Fe-N-P-C complex catalyst was used as the cathode catalyst in a homemade Zn-air battery and good performance of an energy density of 771 Wh kgZn^-1,a power density of 92.9 m W cm^-2 at 137 m A cm^-2 and an excellent durability were exhibited.     

Confined Ni-In intermetallic alloy nanocatalyst with excellent coking resistance for methane dry reforming

Carbon dioxide and methane are two main greenhouse gases which are contributed to serious global warming.Fortunately,dry reforming of methane(DRM),a very important reaction developed decades ago,can convert these two major greenhouse gases into value-added syngas or hydrogen.The main problem retarding its industrialization is the seriously coking formation upon the nickel-based catalysts.Herein,a series of confined indium-nickel(In-Ni)intermetallic alloy nanocatalysts(In_xNi@SiO₂)have been prepared and displayed superior coking resistance for DRM reaction.The sample containing 0.5 wt.%of In loading(In_0.5Ni@SiO₂)shows the best balance of carbon deposition resistance and DRM reactivity even after 430 h long term stability test.The boosted carbon resistance can be ascribed to the confinement of core–shell structure and to the transfer of electrons from Indium to Nickel in In-Ni intermetallic alloys due to the smaller electronegativity of In.Both the silica shell and the increase of electron cloud density on metallic Ni can weaken the ability of Ni to activate C–H bond and decrease the deep cracking process of methane.The reaction over the confined InNi intermetallic alloy nanocatalyst was conformed to the Langmuir-Hinshelwood(L-H)mechanism revealed by in situ diffuse reflectance infrared Fourier transform spectroscopy(in-situ DRIFTS).This work provides a guidance to design high performance coking resistance catalysts for methane dry reforming to efficiently utilize these two main greenhouse gases.     

药物甲氧苄氨嘧啶分子模板聚合物膜的选择性结合及透 过性质研究

用分子印迹技术制备了对甲氧苄氨嘧啶具有特异结合和透过性质的膜状分子模板聚合物,Scatchard分析表明,在分子模板聚合物膜中存在一类等价的可与甲氧苄氨嘧啶结合的位点,该结合位点的平衡离解常数为Kd=4.85×10^-2mmol/L,甲氧苄氨嘧啶分子模板聚合物膜的选择性透过实验表明,在该聚合物膜中存在着由形状和功能基团均与模板分子甲氧苄氨嘧啶相互补的孔穴组成的通道,该通道可有选择性地通过模板分子。     

药物甲氧苄氨嘧啶分子模板聚合物结合作用及选择性研究

采用分子自组装印迹技术合成了对甲氧苄氨嘧啶有高选择性的模板聚合物受体.通过Scatchard分析、¹HNMR和紫外光谱研究了模板聚合物的选择结合特性.结果表明,模板聚合物主要形成一类等价结合位点,通过协同氢键作用专一地结合模板底物,其离解常数为2.22×10^-4mol/L.底物的选择性结合实验表明,这种聚合物对甲氧苄氨嘧啶呈现高的选择性结合能力.     

药物氟哌酸分子模板聚合物的分子识别特性

采用分子印迹技术合成了对药物氟哌酸有高度选择性的模板聚合物。通过 Ｓｃａｔｃｈａｒｄ分析研究了模板聚合物的选择结合特性。结果表明,以甲基丙烯酸为功能单体的模 板聚合物通过离子作用和氢键作用可以形成两类结合位点。用多点结合模型计算两类不同 结合位点的离解常数分别为Ｋｄ１＝２．９×１０－５ｍｏｌ／Ｌ和Ｋ＝３．２×１０－３ｍｏｌ／Ｌ。结合底物的实 验表明,该聚合物对氟哌酸呈现出高的选择性,有明显的开发应用价值。     

环丙沙星分子印迹聚合物的合成及识别性能研究

采用分子印迹技术合成了以环丙沙星为印迹分子,以甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子印迹聚合物。运用平衡结合实验研究了印迹聚合物的吸附特性和选择识别能力。Scatchard分析表明,在所研究的浓度范围内,分子印迹聚合物中形成了两类不同的结合位点。底物选择实验表明,这种聚合物对环丙沙星呈现高的选择结合能力。     

甲氧苄啶分子印迹涂层搅拌棒在复杂样品痕量甲氧苄啶和磺胺药物分析中的应用(英文)

研制了甲氧苄啶分子印迹吸附萃取搅拌棒涂层,并应用于复杂样品中痕量甲氧苄啶和磺胺药物的分析。分子印迹涂层的厚度约为21.5μm,相对标准偏差为5.9%(n=10),涂层均匀、致密,具有良好的热稳定性和化学稳定性。分子印迹涂层的萃取容量是非印迹涂层萃取容量的1.7倍,分子印迹涂层对抗菌增效剂、磺胺药物、三嗪化合物和甲氨蝶呤都表现出良好的选择性吸附萃取能力。建立了分子印迹吸附萃取搅拌棒联用高效液相色谱的分析方法,成功应用于加标尿样和血浆中痕量甲氧苄啶的分析,线性范围为5～200μg/L,检出限为1.6μg/L,在尿样和血浆中的回收率范围分别为84.5%～91.7%和71.9%～85.1%,标准偏差分别为2.9%～4.4%和3.0%～7.3%。该方法还应用于加标牛奶中痕量磺胺药物的分析,线性范围为10～200μg/L,检出限在4.5～6.1μg/L之间,回收率为83.2%～110.2%,标准偏差为4.1%～8.0%.     

4-氨基吡啶分子模板聚合物选择性识别及结合性质的研究

以4-氨基吡啶为模板分子制备了对4-氨基吡啶具有特异选择性的模板聚合物.制得的棒状聚合物经研磨、过筛后,采用平衡结合方法评价了该模板聚合物的结合特性.Scatchard分析表明,在所研究的浓度范围内,聚合物中形成了两类不同的结合位点,这两类结合位点的离解常数采用多点结合模型计算得到的值分别为6.0μmol/L和1.2mmol/L.底物选择性表明,与其它结构相似的分子相比,该聚合物对模板分子4-氨基吡啶显示了很强的结合能力.₁HNMR研究及4-氨基吡啶共振结构分析表明,模板分子与聚合物中的结合位点之间的作用为离子作用.     

染料木素分子印迹聚合物的制备及其识别性能

以染料木素为模板分子、4-乙烯基吡啶(4-VP)为功能单体、乙二醇二甲基双丙烯酸酯(EGDMA)为交联剂、四氢呋喃(THF)为溶剂,采用本体聚合法制备了染料木素的分子印迹聚合物;采用静态平衡结合实验研究了该分子印迹聚合物对染料木素的结合能力和选择性能.结果表明,与化学组成相同的相应非印迹聚合物相比,染料木素分子印迹聚合物对染料木素的吸附性能和选择性更好.利用所合成的分子印迹聚合物作为固相萃取材料填充固相萃取小柱,可以选择性地从豆奶粉中分离、富集染料木素;此外,该分子印迹聚合物还有望用于其他豆制品的分析检验.     

吡哌酸分子印迹聚合物的分子识别

采用分子印迹技术合成了吡哌酸分子印迹聚合物。运用平衡结合实验研究了聚合物的吸附特性和选择性识别能力。Scatchard分析表明,在本文所研究的浓度范围内,聚合物中形成了两类不同的结合位点。吡哌酸分子印迹聚合物对吡哌酸呈现较高的选择识别特性,可作为固相萃取剂,在人血清吡哌酸的分析中对样品进行了有效的提取和净化。     

Molecularly imprinted polymer for monocrotophos and its binding characteristics for organophosphorus pesticides

In this study, molecular imprinting was used to develop a method based on noncovalent interaction for the synthesis of a monocrotophos-specific polymer. The selective binding characteristics of the template polymer were evaluated by 1H NMR study. The result was consistent with the existence of multi-molecular complexes formed by hydrogen-bonding interactions. Batch rebinding studies in acetonitrile were undertaken to quantitatively evaluate the affinity of the polymer for monocrotophos. The experimental binding isotherms were fitted to the Freundlich isotherm and the total number of binding sites of the polymer can be calculated to be 4.046 micromol g(-1). The induced affinity and selectivity by imprinting were examined chromatographically. The polymer gave more than 15 times longer retention for monocrotophos than the nonimprinted polymer with the same chemical composition. Other organophosphorus pesticides under study were eluted close to the void volume on the polymer column.     

PREPARATION OF SURFACE ION-IMPRINTED ATTAPULGITE-SUPPORTED POLYMER AND ITS ADSORPTION BEHAVIORS OF Sr（II）

The surface ion-imprinting concept and chitosan incorporated sol-gel process were applied to the preparation of a new attapulgite-supported organic-inorganic hybrid polymer for selective separation of Sr（II） from aqueous solution. The prepared polymer was characterized with SEM, IR and XRD. The results showed that as a sorbent, it had good configuration and binding sites. Its adsorption behaviors for Sr（II） was investigated by FAAS and ICP-AES. The effects on adsorption capacities, including pH, quiescent time, and adsorbent amount were discussed, and the adsorption isothermal curve was obtained. Then the Kd a parameter estimating relative adsorbability, was conducted to study the selectivity towards Sr（II） of the prepared polymer. Under the optimum conditions, the ion-imprinted polymer offered a fast kinetics for the adsorption of Sr（II） and the maximum capacity was 12.9mg/g. The Kd and K parameters estimating relative adsorbability towards target ion, suggested that selective recognition of the ion-imprinted polymer towards Sr（II） was much higher than that of the non-imprinted polymer and attapulgite. Furthermore, the ion-imprinted polymer is of great regeneration capacity. The prepared functional polymer was shown to be promising for selective preseparation and enrichment of trace Sr（II） in environmental samples.