环氧乙烷与苯乙烯两亲性聚合物的合成

Graft eopolymer eontaining poly(ethylene oxide)side chains on a polystyrene backbone were acrylamided. The amide groups in the copolymers were ionized by using potassium naphthalene, and grafting was achieved by utilizing the amide anions as initiator sites for the polymerization of ethylene oxide at 70℃. The graft copolymers was characterized with respect to molecule weight and composition using NMR, IR, GPC, and DSC. GPC result from the graft copolymer sample suggested a narrow size distribution.     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-graft-POLYSTYRENE BY ATOM TRANSFER RADICAL POLYMERIZATION

The radical copolymerization of methyl methacrylate and 2-hydroxyethyl methacrylate was carried out via atomtransfer radical polymerization (ATRP) initiated by ethyl 2-bromoisobutyrate and catalyzed by CuBr/2,2'-bipyridinecomplex. This polymerization proceeds in a living fashion with controlled molecular weight and low polydispersity. Theobtained copolymer was esterified with 2-bromoisobutylryl bromide yielding a macroinitiator, poly(methyl methacrylate-co-2-hydroxyethyl methacrylate-co-2-(2-bromoisobutyryloxy)ethyl methacrylate), and its structure was characterized by ~1H-NMR. This macroinitiator was used for ATRP of styrene to synthesize poly(methyl methacrylate)-graft-polystyrene. Themolecular weight of graft copolymer increased with the monomer conversion, and the polydispersity remained relatively low.The individual grafted polystyrene chains were cleaved from the macroinitiator backbone by hydrolysis and the hydrolyzed product was characterized by ~1H-NMR and GPC.     

DETERMINATION OF COMPOSITION DISTRIBUTION OF SEGMENTED POLYURETHANES BY THIN LAYER CHROMATOGRAPHY

The compositional heterogeneity has been studied for a series of PCL/MDI/BDO segmentedpolyurethanes. Their average hard segment content measured by NMR method was ranging from17% to 42%. Macromolecules of segmented polyurethanes can be separated according to theircomposition by TLC technique with a mixed solvent of toluene/acetone/ tetrahydrofuran as the devel-oper. A dual wavelength TLC spectrodensitometer was used for quantitative analysis of TLC results,and method for data treatment is proposed to obtain the composition distribution with no need ofany reference samples as TLC elution standards. The polyurethane samples are found to be hetero-geneous in composition, having bimodal distribution curves.     

生物相容性BAB型两亲嵌段共聚物的合成及其自组装

Lys(z)-NCA was synthesized in the presence of triphosgene, amphiphilic triblock copolymers poly(N^c-CBZ-Lysine)-PEG-poly(N^c-CBZ-Lysine) were synthesized in DMF using amino-end ended PEG as initiator with the mechanism of anion ring opening polymerization. The structures of block copolymers were characterized by IR, ^1H-NMR,GPC and DSC. The results showed triblock copolymers with expected structure and low polydispersity in molecular weight could be synthesized by this method. At the same time, the self-assembling behaviors of block copolymer were investigated by TEM. A novel helical aggregates were found to be formed in DMF. Because of biocompatibility of two components of block copolymers, these block copolymers have potential applications in the field of biomaterials.     

COMPARISON OF GPC AND THERMAL FIELDFLOW FRACTIONATION METHODS FOR LINEAR AND STAR BRANCHED POLYSTYRENE SAMPLES

The Thermal Field-Flow Fractionation (TFFF) method was used to determine the elution volumeof a series of star branched polystyrene having different number of arms but the same arm molecularweigh and polystyrene standards with narrow distribution whose molecular weight ranged from5.0×10~4 to 8.6×10~5. Results were obtained by measuring at two temperature difference (△T=30℃and △T=50℃in THF. The same star branched samples were measured by means of GPC method.Comparison of Vr-Mrelationships obtained from TFFF and GPC showed that the displacement of V_r-M curves for star and linear polystyrene is larger than that in GPC. This difference is caused by theentirely different mechanism of separation for these two methods. As the controlling factor is hy-drodynamic volume of the polymer chain in solution for GPC, it is the diffusion coefficient of polymermolecules for TFFF. The experimental results indicate that the influence of variance of chain struc-ture on diffusion coefficient is stronger than that on the hydrodynamic volume and that TFFF tech-nique may be used as a method for characterizing branching of polymer molecules. For this pur-pose a proper theoretical model and more accurate experiments are needed.     

Polymerizable ionic liquid copolymer P(MMA-co-BVIm-Br) and its effect on the surface wettability of PVDF blend membranes

Polymerizable ionic liquid copolymer P(MMA-co-BVIm-Br) was synthesized by radical polymerization technique, and characterized by Fourier transform infrared spectrometry(FTIR), 1H Nuclear magnetic resonance(1H-NMR) and gel permeation chromatography(GPC). The resulting copolymer was used to prepare poly(vinylidene fluoride)(PVDF) blend membranes via a phase inversion method. The effects of the copolymer on the polymorphism, surface wettability and zeta potential(ζ) of the blend membranes were investigated by ATR-FTIR, contact angle instrument and zeta potential analyzer. Scanning electron microscopy(SEM and SEM-EDS) was also applied to investigate the morphology and the surface element changes of the fabricated membranes. The results indicated that P(MMA-co-BVIm-Br) copolymer existed on the surface of the membrane which made the blend membrane have a positive surface during the experimental p H range. The copolymer was also in favor of the formation of β crystal phase in PVDF membranes. The contact angle experiment indicated that P(MMA-co-BVIm-Br) copolymer could switch the wettability of the blend membranes from hydrophilic to hydrophobic by exchanging Br-anion with PF-6. Compared with pure PVDF membranes, the water flux and water recovery flux of the blend membranes were enhanced obviously. The results from the flux recovery ratio(FR) and total fouling ratio(Rt) all suggested that the blend membranes had good anti-fouling properties.     

SYNTHESIS AND POLYMERIZATION OF α-METHACRYLYOXYLETHYLOXYCARBONYLMETHYL-ω-(N,N-DIETHYLDITHIOCARBAMYL)POLYSTYRENE MACROMONOMERS

Polystyrene macromonomers with different molecular weight were prepared by radical polymerization of styrene(St) in benzene using β-methacryloxylethyl 2-N,N-diethyldithiocarbamylacetate (MAEDCA) as a monomer-iniferter.Characterization of the macromonomer by ~1H-NMR showed that the end groups were α-methacrylyoxylethyloxycarbonyl-methyl and ω-(N,N-diethyldithiocarbamyl). The macromonomer was difficult to homopolymerize, but it was easilycopolymerized with methyl methacrylate (MMA) initiated by AIBN to form graft copolymers (PMMA-g-PSt) with PStbranches randomly distributed along the PMMA backbone. Copolymerization reaction and the structure of the graftcopolymers were strongly affected by M_n and concentration of the macromonomer. The composition and M_n of the purified graft copolymer were determined by ~1H-NMR and GPC analysis.     

Characterization of impact polypropylene copolymers by solvent fractionation

The compositional heterogeneity of two impact polypropylene copolymers(IPCs) was studied by a combinatory investigation of temperature rising elution fractionation(TREF) and solvent fractionation.The chain structures and composition of fractions obtained from solvent fractionation were examined in detail.The TREF results shows that there are much more E-P segmented copolymer and more uniform distribution of ethylene sequence in IPC-1,which is responsible for its better comprehensive mechanical performance.The fractions from hexane and heptane are ethylene-propylene rubber phase and E-P block copolymers respectively.The result of solvent fractionation method also shows that custom hexane or heptane extractions can not extract the E-P copolymer completely.     

Novel thermogelling poly(ε-caprolactone-co-lactide)-poly(ethylene glycol)-poly(ε-caprolactone-co-lactide) aqueous solutions

The aqueous solutions of poly(e-caprolactone-co-lactide)-poly(ethylene glycol)poly(e-caprolactone-co-lactide) undergoing sol-gel transition as the temperature increases from 20 to 50℃were successfully prepared. The thermogelling triblock copolymers were synthesized by subtle tuning of the chemical composition and the hydrophilicity/hydrophobicity balance. The sol-gel transition was studied focusing on structure-property relationship. The amphiphilic copolymer formed micelles in aqueous solutions. It is believed to have potential applications in drug delivery and tissue engineering.     

Preparation of polypropylene/poly(styrene-co-(butyl methacrylate)) nanoblends by diffusion and subsequent copolymerization of monomers in isotactic polypropylene pellets

The diffusion and subsequent copolymerization of styrene(St)/butyl methacrylate(BMA) mixed monomers in i PP pellets to prepare copolymer nanoblends were investigated. The diffusion step was carried out at 90 ℃ for 2 h in water, and the copolymerization was initiated by the addition of BPO with the aid of a small amount of St. The diametrical distributions of both St and BMA units and their ratio St/BMA were investigated by micro FTIR. Both St and BMA can diffuse into the centres of i PP pellets. The diametrical distribution of St/BMA ratio is constant in all the copolymer blends. The copolymer composition depends on the comonomer feed ratio. The molecular weights of the copolymers were measured by GPC after extraction with tetrahydrofuran. The phase morphology of the copolymer blends was investigated by FESEM, showing the average particle sizes of less than 100 nm. DSC measurements show that the diffusion and subsequent copolymerization of St/BMA monomers only occur in the amorphous regions of i PP pellets.     

Synthesis and characterization of random or gradient butadiene-p-methylstyrene copolymers via anionic polymerization

Copolymers of 1,3-butadiene and p-methylstyrene （p-MS） were synthesized via anionic polymerization. A benzophenone-potassium complex was added to tune the reactivity ratio of the two monomers, leading to random and gradient composition alonglthe copolymer chain. The overall composition and microstructure could be controlled and well characterized by GPC and H-NMR. The p-MS was distributed from gradient to random with increasing the content of the benzophenone-potassium complex, and the 1,2-microstrucmre in the polybutadiene sequence increased at the same time. The hydrogenation of the copolymer of 1,3-butadiene and p-MS resulted in the corresponding saturated copolymer with well- defined structure and narrow molecular weight distribution.     

Ring-opening Copolymerization of ε-Caprolactone and δ-Valerolactone Catalyzed by a 2,6-Bis(amino)phenol Zinc Complex

In combination with methyllithium,a 2,6-bis(amino)phenol zinc complex 1 was used in the ring-opening polymerization ofδ-valerolactone in the absence or presence of benzyl alcohol and showed high efficiency,mainly producing cyclic and linear polyvalerolactones,respectively.On the basis of homopolymerization,the ring-opening copolymerization ofε-caprolactone andδ-valerolactone was investigated.The P(CL-co-VL)random copolymers,PCL-b-PVL and PVL-b-PCL diblock copolymers,were prepared by varying the feeding strategy(premixing or sequential feeding).The copolymer composition was adjusted by varying the feeding ratio of two monomers.The structure and thermal properties of obtained polymers were characterized by GPC,1 H-NMR,13 C-NMR,MALDI-TOF mass spectroscopy,and DSC,respectively.     

SYNTHESIS AND CHARACTERIZATION OF AMPHIPHILIC GRAFT COPOLYMER CONTAINING MICROPHASE SEPARATED AND LONG POLY(ETHYLENE OXIDE) SIDE CHAIN STRUCTURES**

Acryloyl terminated Poly (ethyleneoxide)macromonomers (PEO-A) with different PEO chain lengths have been prepared by deactivation of PEO alkoxide with acryloyl chloride. A new kind of amphiphilic polystyrene-g-poly (ethylene oxide)graft copolymer containing both microphase separated and PEO side chain structures has been synthesized from radical copolymerization of PEO-A macromonomer with styrene. After careful purification by a newly-developed method called "selective dissolution', the well-defined structure of the purified copolymers was confirmed by IR, ~1H-NMR and GPC. Various experimental parameters controlling the copolymerization were studied in detail. The results indicated that the feed ratio of styrene to macromonomer(S/M) was the most important determining factor for the composition of the copolymers. A detailed "comb- model" was proposed to describe the molecular structure of the graft copolymers. Finally, this amphiphilic graft copolymers may readily form microphase separated structures as clearly indicated by transmission electron microscopy.     

A NEW METHOD FOR ESTIMATION OF WEIGHT-AVERAGE MOLECULAR WEIGHT OF POLYMER FROM THE INTRINSIC VISCOSITY AND CHROMATOGRAM

A new method is proposed for estimation of weight-average molecular weight from the intrinsicviscosity and GPC chromatogram of a polymer sample for which Mark-Houwink coefficients are notknown. The method bases on an approximate relationship between GPC data and the intrinsicviscosity of the sample. Reliability of this method was tested by comparing with the universalcalibration method which requires known Mark-Houwink coefficients for seven samples havingdifferent molecular weight distributions. Results obtained by the new method are in excellent agree-ment with those by the universal calibration method.     

Synthesis of graft copolymers with polyisobutylene branch chains

<正>The copolymerization of 4-vinylbenzyl chloride(VBC) and vinyl acetate(VAC) was carried out in toluene at 75℃via radical polymerization using 2,2'-azo-bis-(isobutyronitrile)(AIBN) as an initiator.The random copolymers of poly(4-vinylbenzyl chloride-co-vinyl acetate)(P(VBC-co-VAC)) with number average molecular weight(M_n) from 2000 to 6900,relatively narrow molecular weight distribution(MWD,M_w/M_n ca.2.0) and with different copolymer composition of 4-vinylbenzyl chloride(VBC) from 17 mol%to 62 mol%could be obtained.The P(VBC-co-VAC) copolymers with an average number of 7 to 13 initiating sites of benzyl chloride per macromolecule could be used for the cationic polymerization of isobutylene(IB).The cationic polymerizations of IB were further conducted by using P(VBC-co-VAC) copolymers as macroinitiators in conjunction with TiCl_4 at -40℃in CH_2Cl_2.The effects of VBC/TiCl_4(molar ratio) on monomer conversion,M_n and MWD of the resultant copolymers were investigated under 3 sets of conditions.It is found that P(VBC-co-VAC)-g-PIB copolymers with relatively narrow MWD(M_w/M_n ca.2.0) and with terminal tert-chlorine functional groups in branched PIB chains could be successfully synthesized when VBC/TiCl_4(molar ratio) was set in the range from 0.10 to 1.12.The unimodal GPC curve of the P(VBC-co-VAC)-g-PIB copolymers by RI detector was almost in harmony with the GPC curve by UV detector.The TEM image of the P(VBC-co-VAC)-g-PIB copolymer stained by RuO indicated that the copolymer formed a two-phase morphology with P(VBC-co-VAC)-rich domains of 20-100 nm in size tethered by PIB branch segments.     

Fluorometric determination of nonylphenol in water samples enriched with zirconium doped titanium dioxide nanotubes solid phase extraction

This paper developed a fluorometric method for the sensitive determination of nonylphenol in water samples by preconcentration with zirconium doped titanium dioxide nanotubes solid phase extraction.The parameters on extraction that would influence the enrichment performance such as the kind and volume of eluent,sample pH,sample flow rate,and sample volume were optimized in detail.Under the optimal conditions,the proposed method provided an excellent linear range of 1-150 mg/L and good LOD of 0.076 mg/L.The relative standard deviation(RSD,n = 6) was 2.8%.Proposed method was also used for the analysis of real water samples and the spiked recoveries were satisfied in the range of 98.7-103%.     

PLANTAGO PSYLLIUM-GRAFTED-POLYACRYLONITRILE： SYNTHESIS,CHARACTERIZATION AND ITS USE FOR SOLID REMOVAL FROM SEWAGE WASTEWATER

Plantago psyllium mucilage (PSY), an anionic natural polysaccharide consisting of pentosan and uronic acid obtained from the seeds of Plantago psyllium (Plantago family), was grafted with acrylonitrile (AN). Graft copolymers were prepared by ceric ion initiated solution polymerization technique and were characterized by FT-IR spectroscopy, scanning electron microscopy and differential scanning calorimetry. These copolymers are good flocculating agents for removal of suspended (SS) and total dissolved solid (TDS) in sewage wastewater treatment. The effects of copolymer dose, pH and contact time on flocculation capacity of one selected copolymer sample were studied by jar test method. The suitable pH range for maximum solid removal was 7.0 to 9.2 and the optimum copolymer dose was 1.2mg/L. The overall process for solid removal took 4h. X-ray diffraction (XRD) patterns of grafted copolymer, PSY grafted polyacrylonitrile (PSY-g-PAN) and solid waste, before and after treatment are used to suggest the interaction of the solid waste with PSY-g-PAN copolymer.     

AN APPROACH TO SYNTHESIZE POLY(ETHYLENE GLYCOL)-b-POLY(ε-CAPROLACTONE) WITH TERMINAL AMINO GROUP via SCHIFF’S BASE AS AN INITIATOR

A new method to synthesize a degradable terminal amino group-containing copolymer,poly(ethylene glycol)-b- poly(ε-caprolactone)(MPEG-PCL-NH_2),was developed in the following three steps:(1)the ring-opening polymerization (ROP)ofε-caprolactone from the Schiff base prepared from benzatdehyde and ethanolamine(Ph-CH=NCH_2CH_2OH)used as an initiator to obtain heterobifunctional poly(ε-caprolactone)with one terminal Schiff base group and one hydroxyl group (HO-PCL-CH_2CH_2N=CH-Ph);(2)the coupling reaction of two reactive precursors,a hydroxy-terminated HO-PCL- CH_2CH_2N=CH-Ph andα-monocarboxy-ω-monomethoxy poly(ethylene glycol)(CMPEG)to synthesize MPEG-PCL- CH_2CH_2N=CH-Ph;(3)the conversion of the -N=CH-Ph end-group into NH_2 end-group by acidification of acetic acid to obtain MPEG-PCL-NH_2.The structures from the precursors to the terminal amino group-containing copolymer were confirmed by ~1H-NMR and their molecular weights were measured by gel permeation chromatography.The amphiphilic terminal amino group-containing copolymer could self-assemble into micelles in an aqueous system with PCL block as the core and PEG block as the shell.The micelle formation of the terminal amino group-containing block copolymer was studied by fluorescent probe technique and the existence of critical micellar concentration(cmc)confirmed the amphiphilic nature of the resulting copolymer.ESEM and DLS analysis of the micelles revealed a homogeneous spherical morphology and a unimodal size distribution.     

Metal-free synthesis of amphiphilic functional polycarbonates

Amphiphilic block copolymers of poly(5-benzyloxy trimethylene carbonate)(PBTMC) and poly(ethylene glycol)(PEG) were synthesized through enzymatic polymerization using immobilized porcine pancreas lipase(IPPL).The obtained copolymers with different compositions were characterized by GPC and ~1H NMR.The copolymer composition was in agreement with the feed ratio. The molecular weight of the copolymers showed an increasing trend with the decrease of PEG contents.Micelles of the copolymers were formed by dialysis procedure,and characterized by transmission electron microscopy (TEM).     

Experimental and Theoretical Study of the Effect of Moisture on Methane Adsorption and Desorption by Activated Carbon at 273.5 K

Adsorption and desorption of methane by activated carbon (AC) at constant temperature and at various pressures were investigated. The effect of moisture was also studied. A volumetric method was used, up to 40 bar, at a temperature of 273.5 K. Results of a dry AC sample were compared with those obtained from a moist sample and two different ACs with different physical and surface properties were used. As expected, the results showed that the existence of moisture, trapped in the AC pores, could lead to a decrease in the amount of methane adsorbed and a decrease in the amount of methane delivered during desorption. To model the experimental results, a large variety of adsorption isotherms were used. The regressed parameters for the adsorption isotherms were obtained using the experimental data generated in the present study. The accuracy of the results obtained from the different adsorption isotherms was favorably compared.