Conformation of nonideal hyperbranched polymer in ABn (n = 2, 4) type polymerization

The conformation of hyperbranched polymers from one pot polymerization with AB_n (n = 2, 4) type monomers, applying the reactive 3D bond fluctuation lattice model, are systematically studied using scaling relation R ～ N^λ, where R is the radius of gyration or the hydrodynamic radius of a hyperbranched polymer with the degree of polymerization N. The exponent λ was calculated at various monomer concentrations and group conversions. When the concentration of monomers with the equal reactivity of B groups increases from 0.1 to 0.9, the exponents λ_g and λ_h (corresponding to the radius of gyration and hydrodynamic radius, respectively) are in the ranges of 0.51–0.37 and 0.41–0.34 at the full conversion of A groups. Especially, we find that λ_g decreases linearly with the reaction conversion increasing. The ratio of z‐average radius, R_gz/R_hz, ranges from 1.08 to 1.32 and indicates that hyperbranched polymer is soft macromolecule with penetrable structure. In the case of AB₂ type monomer with unequal reactivities, λ displays complicated dependence on the reaction conversion and the reactivity ratio. The results of our simulation are consistent with those of experiments and theories, and valuable in better understanding the fundamental properties of hyperbranched polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 610–616, 2010     

Kinetics of nonideal hyperbranched A2 + B3 polycondensation: Simulation and comparison with experiments

To overcome the deficiency of mean field method in introducing the intramolecular cyclization and the steric effects, the reactive bond fluctuation model was applied to study nonideal hyperbranched A₂ + B₃ polycondensation, which has high sensitivity of gelation to the concentration of monomers, the feed ratio and the reactivity of functional groups. Simulation demonstrated that the mean field theory overestimated hyperbranched polymerization especially at high reaction conversion in the system with low monomer concentration where the intramolecular cyclization and the steric hindrance play crucial influences on molecular weight, molecular weight distribution and gel point (GP). The dependences of GP on the monomer concentration, feed ratio, and the reactivity of groups are clearly shown. We further simulated a specific polycondensation system with aromatic terephthaloyl chloride (TCl, A₂) and 1,1,1‐tris(4‐trimethylsiloxyphenyl)ethane (TMS‐THPE, B₃) (Macromolecules 2007, 40, 6846) using fitting technology, and estimated molecular weight, molecular weight distribution, GPs, and the conformation of hyperbanched polymer. It provides a feasible way to quantitatively understand hyperbranched polymerization with the reaction specificity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Calculation of topological parameters of hyperbranched macromolecules synthesized via living radical polymerization

Numerical calculations of the kinetic model of synthesis of hyperbranched polymers in the living radical polymerization mode were performed. Analytical expressions were obtained that make it possible to predict the maximum yield of hyperbranched polymers and their topological parameters, such as the branching frequency; the numbers of living ends, monomer units and multiple bonds per macromolecule; and the degree of conversion at the gel point. The model is based on the use of a branching monomer M_m that contains m ≥ 2 polymerizable bonds in its molecule in combination with a monomer M₁ capable of forming linear chains only.     

Degree of branching of the hyperbranched polymers resulted from ab<Subscript>2</Subscript> polycondensation with substitution effect

The analytical expressions of the various structural units and the average degree of branching for the hyperbranched polymers resulted from AB₂ polycondensation with substitution effect were derived by the kinetic mechanism.The reactivity difference between the B group in linear unit and that in terminal group has great effect on the molecular parameters of the products obtained.The concentration of terminal units has a maximum with the increase of the conversion of A groups（x）.The higher the reactivity ratio（r） of linear B group to branched one is,the later the maximum appears and the larger it is.The degree of branching of the hyperbranched polymers obtained is controllable by adjusting the parameters of r and x,which increases with increasing both x and r.     

Hyperbranched copolymers made from A2, B2 and BB′2type monomers (iv)

The new approach for synthesis of hyperbranched polymers from commercially available A₂ and type monomers was extended to synthesize hyperbranched copolymers. In this work, hyperbranched copoly(sulfone-amine) was prepared by copolymerization of divinyl sulfone (A₂) with 4,4′-trimethylenedipiperidine (B₂) and N-ethylethylenediamine (BB’₂). During the reaction, secondary-amino groups of B₂ and BB’₂ monomers react rapidly with vinyl groups of A₂ monomers within 35 s, generating a type of intermediate containing one vinyl group and two reactive hydrogen atoms. Now the intermediates can be regarded as a new type monomer, which further polymerizes to form hyperbranched copoly(sulfone-amine). The polymerization mechanism was investigated with FTIR and LC-MSD. The degree of branching (DB) of hyperbranched copolymers increased with decreasing the ratio of 4, 4′-trimethylenedipiperidine to N-ethylethylenediamine, so DB can be controlled. When the initial mole ratio of B₂ to BB′₂was equal to or higher than four,r≥4, resulted copolymers were semi-crystalline, while copolymers withr3 were amorphous.     

Michael addition polymerizations of difunctional amines (AA′) and triacrylamides (B3)

Novel hyperbranched poly(amido amine)s containing tertiary amines on the backbones and acryl or secondary amines as the surface groups were successfully synthesized via the Michael addition polymerizations of a triacrylamide [1,3,5‐triacryloylhexahydro‐1,3,5‐triazine (TT)] and a difunctional amine [n‐butylamine (BA)] NMR techniques were used to clarify the structures of hyperbranched polymers and polymerization mechanism. The reactivity of the secondary amine formed in situ was much lower than that of the primary amines in BA. When the feed molar ratio was 1:1 TT/BA, the secondary amine formed in situ was almost kept out of the reaction before the BA (AA′) and TT (B₃) monomers were consumed, and this led to the formation of A′B₂ intermediates containing one secondary amine group and two acryl groups. The self‐polymerization of the A′B₂ intermediates produced hyperbranched polymers bearing acryl as surface groups. For the polymerization with the feed molar ratio of 1:2 TT/BA, A′₂B intermediates containing one acryl group and two secondary amine groups were accumulated until self‐polymerization started; the self‐polymerization of the intermediates formed hyperbranched polymers with secondary amines as their surface groups. Modifications of surface functional groups were studied to form new hyperbranched polymers. The hyperbranched poly(amido amine)s were amorphous. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6226–6242, 2006     

A synthetic approach for water soluble hyperbranched poly(N,N-ethylidenebis(N-2-chloroacetyl acrylamide)) with high degree of branching via atom transfer radical polymerization/self-condensing vinyl polymerization

A novel acrylamide A2B2* (A = alkene, B* = alkyl chlorine) type inimer was obtained from commercially available 1,2-ethylenediamine, chloroacetyl chloride and acryloyl chloride. The as-prepared monomer can form water-soluble hyperbranched poly(N,N-ethylidene bis(N-2-chloroacetyl acrylamide))s (HPECA) through atom transfer radical polymerization/self-condensing vinyl polymerization method in the presence alkyl chlorine/CuCl/2,2-bipyridine activation system which can effectively suppress the gelation formation. 1H-NMR spectra and dual detector size exclusion chromatography proved the hyperbranched structure indisputably, and the degree of branching was determined by the detailed analyses of 1H-NMR spectra. The trend of the degree of branching was in consistent with the result of Mark-Houwink exponent a. The experiment results suggested that the conversion was 67%, Mw = 13.2 ? 104, Mark-Houwink a = 0.282 and the degree of branching = 64% when the reaction temperature was 120 oC, reaction time = 168 h and N,N-ethylidene bis(N-2-chloroacetyl acrylamide):Cu(I) = 50:0.62.     

Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008     

Systhesis of double-hydrophilic core-shell type multiarm star copolymer polyethylenimine-block-poly(2-hydroxyethyl methacrylate

Multiarm star block copolymers hyperbranched polyethylenimine-b-poly(2-hydroxyethyl methacrylate) (HPEI-b-PHEMA) with average 28 PHEMA arms have been prepared by atom transfer radical polymerization (ATRP) of HEMA in a mixed solvent of methanol and water using a core-first strategy. The hyperbranched macroinitiator employed was prepared on the basis of well-defined hyperbranched polyethylenimine with Mw/Mn of 1.04 by amidation with 2-bromo-isobutyryl bromide. The polymerization condition was optimized to prepare star copolymers with narrow dispersity, and the variables included the volume ratio of methanol to water, the molar ratio of initiating site to CuCl and the molar ratio of [CuCl]:[CuBr2]. Under the optimized polymerization condition, the lowest Mw/Mn value of the obtained star copolymers was around 1.3. Kinetic analysis showed that an induction period existed in the polymerization of HEMA. After this induction period, a linear dependence of ln([M]0/[M]t) on time was observed. The obtained HPEI-b-PHEMA could adsorb hydrophilic molecules. The comparison with the star copolymer with hydrophobic core and hydrophilic PHEMA shell verified that both the hydrophilic core and shell could host the hydrophilic guests, but the amidated HPEI core was more effective than the PHEMA shell.     

Homopolymerization of ω‐Styryl‐Polystyrene Macromonomers in the Presence of CpTiF3/MAO

Summary: ω‐Styryl‐polystyrene macromonomers were synthesized by anionic induced deactivation reactions. Their homopolymerization in the presence of a fluorinated half‐sandwich metallocene catalyst (CpTiF₃/MAO) was investigated. In spite of the intrinsic lower reactivity of these macromonomers with respect to the micromolecular monomer, coordination homopolymerization was possible. The influence of several experimental parameters on the polymerization yield and degree could be demonstrated. In most cases, under identical experimental conditions, higher polymerization yields and degrees were observed with respect to the CpTiCl₃/MAO catalyst.

The synthesis of p‐polystyryl‐substituted styrene derivatives by the homopolymerization of ω‐styryl‐polystyrene macromonomers in the presence of CpTiF₃.     

A Convenient A2 + B3 Approach to Hyperbranched Poly(arylene oxindole)s

Summary: We developed a facile approach to hyperbranched polymers by applying a superelectrophilic reaction within an A₂ + B₃ strategy. A significant reactivity difference between the intermediate and the starting material was utilized to avoid gelation in the A₂ + B₃ polymerization. A number of hyperbranched poly(arylene oxindole)s were achieved in a one‐step polymerization and characterized by NMR spectroscopy and gel permeation chromatography. Moreover, further modifications at the interior and exterior of the resulting polymers were explored as well.

Structure of the hyperbranched polymers produced using the A₂ + B₃ approach.     

Transfer reaction of the polystyrene radical with electron-acceptor molecules of tetrachlorophthalanhydride

The transfer constants (C_s) of the polystyrene radical with some derivatives of phthalic acid have been determined. Among the agents used, tetrachlorophthalanhydride (TCPA) differs distinctly from other compounds by its value of C_s 3·1 × 10^?3 for thermal and 3·4 × 10^?3 for initiated polymerization of styrene. The values of C_s for phthalanhydride, dimethyl phthalate, and tetrachlorodimethyl phthalate are lower by two decimal orders. The considerable decrease in the degree of polymerization of styrene prepared in the presence of TCPA is mainly attributed to the increased reactivity of chlorine atoms in TCPA induced by the acceptor effect of anhydride ring. Participation of a TCPA-styrene complex in transfer reaction has been assumed but not proved.     

Synthesis of amphiphilic linear‐hyperbranched graft‐copolymers via grafting based on linear polyethylene backbone

The synthesis of amphiphilic linear‐hyperbranched graft‐copolymers in a grafting‐from approach is reported. The linear polyethylene with terminated hydroxyls, prepared by copolymerization of ethylene and 10‐undecen‐1‐ol, was used as macroinitiator for ring‐opening multibranching polymerization of glycidol by a typical slow monomer addition approach. Successful attachment of the hyperbranched grafts to the linear polyethylene backbone was confirmed by ¹H/¹³C NMR, GPC, and TGA. The degree of polymerization and M_w/M_n of hyperbranched grafts were efficiently controlled by temperature, deprotonation ratio as well as the molar ratio of glycidol/hydroxyl (N_glycidol/N_OH). The complicated microstructures caused by unsymmetric glycidol structure were analyzed by DEPT and 2D HSQC spectra, the degree of branching of 0.63–0.66 were calculated, indicating the extent of branch is close to theoretical values. The thermal analysis of linear‐hyperbranched copolymers via TGA and DSC is also presented. To our knowledge, this is the first report of a linear‐hyperbranched graft‐copolymer with a crystalline and nonpolar linear‐polyethylene segment. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2146–2154     

A versatile A2 + B3 approach to hyperbranched polyacenaphthenequinones

A series of hyperbranched polyacenaphthenequinones has been prepared by superelectrophilic aromatic substitution of (substituted) acenaphthenequinone and 1,3,5‐tris‐(4‐phenoxybenzoyl)benzene via a facile A₂ + B₃ approach. Because of the strongly increased reactivity of the second A functionality, gelation was efficiently avoided during the polymerization. The structure of the resulting polymer was characterized by NMR spectroscopy and gel permeation chromatography. Further modification of the hyperbranched polyacenaphthenequinone was explored both on the acenaphthenequinone and aromatic moieties. Moreover, the polymer modified through sulfonation was investigated as a water‐soluble acid catalyst for the degradation of biomass resources. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2596‐2603     

Synthesis of Hyperbranched Polysaccharide by Thermally Induced Cationic Polymerization of 1,6-Anhydrohexopyranose

The thermally induced cationic polymerizations of 1,6-anhydro-β-D -glucopyranose ( 1a ), 1,6-anhydro-β-D -mannopyranose ( 1b ) and 1,6-anhydro-β-D -galactopyranose ( 1c ) as a latent cyclic AB₄-type monomer were carried out using (S-2-butenyl)tetramethylenesulfonium hexafluoroantimonate ( 2 ) as an initiator. The solution polymerization in propylene carbonate proceeded without gelation to produce the water-soluble hyperbranched polysaccharides ( 3a-c ) with controlled molecular weights and narrow polydispersities. The degree of branching (DB), estimated by the methylation analysis of 3a-c , was in the range of 0.38 – 0.49. The thermally induced cationic polymerization of 1a-c using 2 is a facile method leading to a hyperbranched polysaccharide with a high DB value.     

Hyperbranched aryl polycarbonates derived from A2B monomers versus AB2 monomers

Hyperbranched aryl polycarbonates were prepared via the polymerizations of A₂B and AB₂ monomers, which involved the condensation of chloroformate (A) functionalities with tert‐butyldimethylsilyl‐protected phenols (B), facilitated by reactions with silver fluoride. The polymerization of the A₂B monomer gave hyperbranched polycarbonates bearing fluoroformate chain ends, which were hydrolyzed to phenolic chain‐end moieties and further elaborated to tert‐butyldimethylsilyl ether groups. The polymerization of the AB₂ monomer gave tert‐butyldimethylsilyl ether‐terminated hyperbranched polycarbonates. The polymerizations were conducted at 23–70 °C in 20% acetonitrile/tetrahydrofuran in the presence of a stoichiometric excess of silver fluoride for 20–40 h to afford hyperbranched polycarbonates with weight‐average molecular weights exceeding 100,000 Da and polydispersity indices of typically 2–3. The degrees of branching were determined by a reductive degradation procedure followed by high‐performance liquid chromatography. Alternatively, the degrees of branching were measurable by solution‐state ¹H NMR analyses and agreed with the statistical 50% branching expected for the polymerization of A₂B and AB₂ monomers not experiencing constructive or destructive electronic effects on the reactivity of the multiple functional groups. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 823–835, 2002; DOI 10.1002/pola.10167     

Novel hyperbranched polymers synthesized via A3 + B(B′) approach by radical addition‐coupling polymerization

In this study, a novel application of radical addition‐coupling polymerization (RACP) for synthesis of hyperbranched polymers is reported. By Cu/PMDETA‐mediated RACP of 2‐methyl‐2‐nitrosopropane with trimethylolpropane tris(2‐bromopropionate) or a bromo‐ended 3‐arm PS macromonomer, two types of hyperbranched polymers with high degree of polymerization are synthesized under mild conditions, respectively. The chemical structures of the hyperbranched polymers are carefully characterized. By selective degradations of the ester groups and weak bonds of NO? C in the polymers, high degree of alternative connection of the two monomers in the synthesized polymers have been identified. Based on the experimental results, mechanism of formation of the hyperbranched polymer is proposed, which includes formation of carbon radicals from the tribromo monomer through single electron transfer, its capture by 2‐methyl‐2‐nitrosopropane that results in nitroxide radical, and cross‐coupling reaction of the nitroxide radical with other carbon radicals. Hyperbranched polymer can be formed in a step‐growth mode after multiple steps of such reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 904–913     

UV‐activated hydrosilylation: a facile approach for synthesis of hyperbranched polycarbosilanes

A facile approach for synthesis of hyperbranched polycarbosilane from AB₂ monomer via UV‐activated hydrosilylation is presented in this communication. The polymerization process was monitored using real‐time FTIR spectroscopy and the resulting hyperbranched polycarbosilanes were characterized using ¹H‐NMR, ¹³C‐NMR, ²⁹Si‐NMR and SEC/MALLS. It is found that hyperbranched polycarbosilane can be synthesized from methyldiallylsilane via UV‐activated hydrosilylation with bis(acetylacetonato)platinum(II) as catalyst. The polymerization activated by UV irradiation was much faster than that under thermal conditions. The similar degree of branching, average number of branch units and the exponent of the Mark–Houwink equation demonstrate that the hyperbranched polycarbosilane synthesized via UV‐activated polyhydrosilylation possesses almost the same branching structure as that synthesized via thermal‐activated polyhydrosilylation. Copyright © 2009 John Wiley & Sons, Ltd.     

Hyperbranched copolymers made from A2, B2 and BB′2type monomers (iv)

The new approach for synthesis of hyperbranched polymers from commercially available A₂ and type monomers was extended to synthesize hyperbranched copolymers. In this work, hyperbranched copoly(sulfone-amine) was prepared by copolymerization of divinyl sulfone (A₂) with 4,4′-trimethylenedipiperidine (B₂) and N-ethylethylenediamine (BB’₂). During the reaction, secondary-amino groups of B₂ and BB’₂ monomers react rapidly with vinyl groups of A₂ monomers within 35 s, generating a type of intermediate containing one vinyl group and two reactive hydrogen atoms. Now the intermediates can be regarded as a new type monomer, which further polymerizes to form hyperbranched copoly(sulfone-amine). The polymerization mechanism was investigated with FTIR and LC-MSD. The degree of branching (DB) of hyperbranched copolymers increased with decreasing the ratio of 4, 4′-trimethylenedipiperidine to N-ethylethylenediamine, so DB can be controlled. When the initial mole ratio of B₂ to BB′₂was equal to or higher than four,r≥4, resulted copolymers were semi-crystalline, while copolymers withr3 were amorphous.     

Effect of structural and physico-chemical features of cellulosic substrates on the efficiency of enzymatic hydrolysis

Effects of major physicochemical and structural parameters of cellulose on the rate and degree of its enzymatic hydrolysis were tested with cellulosic materials from various sources. Some different pretreatments were: mechanical (milling), physical (X-ray irradiation), and chemical (cadoxen, H₃PO₄, H₂SO₄, NaOH, Fe²+/H₂O₂). The average size of cellulose particles and its degree of polymerization had little effect on the efficiency of enzymatic hydrolysis. For samples of pure cellulose (cotton linter, microcrystalline cellulose, α-cellulose), increase in the specific surface area accessible to protein molecules and decrease in the crystallinity index accelerated the enzymatic hydrolysis (the correlation coefficients were 0.89 and 0.92, respectively). In the case of lignocellulose (bagasse), a quantitative linear relationship only between specific surface area and reactivity was observed.