PEG-detachable polyplex micelles based on disulfide-linked block catiomers as bioresponsive nonviral gene vectors

PEG-based polyplex micelles, which can detach the surrounding PEG chains responsive to the intracellular reducing environment, were developed as nonviral gene vectors. A novel block catiomer, PEG-SS-P[Asp(DET)], was designed as follows: (i) insertion of biocleavable disulfide linkage between PEG and polycation segment to trigger PEG detachment and (ii) a cationic segment based on poly(aspartamide) with a flanking N-(2-aminoethyl)-2-aminoethyl group, P[Asp(DET)], in which the Asp(DET) unit acts as a buffering moiety inducing endosomal escape with minimal cytotoxicity. The polyplex micelles from PEG-SS-P[Asp(DET)] and plasmid DNA (pDNA) stably dispersed in an aqueous medium with a narrowly distributed size range of approximately 80 nm due to the formation of hydrophilic PEG palisades while undergoing aggregation by the addition of 10 mM dithiothreitol (DTT) at the stoichiometric charge ratio, indicating the PEG detachment from the micelles through the disulfide cleavage. The PEG-SS-P[Asp(DET)] micelles showed both a 1-3 orders of magnitude higher gene transfection efficiency and a more rapid onset of gene expression than PEG-P[Asp(DET)] micelles without disulfide linkages, due to much more effective endosomal escape based on the PEG detachment in endosome. These findings suggest that the PEG-SS-P[Asp(DET)] micelle may have promising potential as a nonviral gene vector exerting high transfection with regulated timing and minimal cytotoxicity.     

Biocleavable polyrotaxane-plasmid DNA polyplex for enhanced gene delivery

A biocleavable polyrotaxane, having a necklace-like structure consisting of many cationic alpha-cyclodextrins (alpha-CDs) and a disulfide-introduced poly(ethylene glycol) (PEG), was synthesized and examined as a nonviral gene carrier. The polyrotaxane formed a stable polyplex having positively charged surface even at low charge ratio. This is likely to be due to structural factors of the polyrotaxane, such as the mobile motion of alpha-CDs in the necklace-like structure. Rapid endosomal escape was observed 90 min after transfection. The positively charged surface and the good buffering capacity are advantageous to show the proton sponge effect. The pDNA decondensation occurred through disulfide cleavage of the polyrotaxane and subsequent supramolecular dissociation of the noncovalent linkages between alpha-CDs and PEG. Transfection of the DMAE-SS-PRX polyplex is independent of the amount of free polycation. Those properties played a key role for delivery of pDNA clusters to the nucleus. Therefore, the polyplex nature and the supramolecular dissociation of the polyrotaxane contributed to the enhanced gene delivery.     

Block catiomer polyplexes with regulated densities of charge and disulfide cross-linking directed to enhance gene expression

A block catiomer polyplex, showing a high stability in the extracellular medium and an efficient release of plasmid DNA (pDNA) in the intracellular compartment, was developed by controlling both the cationic charge and disulfide cross-linking densities of the backbone polycations. Poly(ethylene glycol)-poly(L-lysine) block copolymer (PEG-PLL) was thiolated using either of two thiolation reagents, N-succinimidyl 3-(2-pyridyldithio)propionate (SPDP) or 2-iminothiolane (Traut's reagent), to investigate the effects of both the charge and disulfide cross-linking densities on the properties of the polyplexes. The introduction of thiol groups by SPDP proceeded through the formation of amide linkages to concomitantly decrease the cationic charge density of PLL segment, whereas Traut's reagent promoted the thiolation with the introduction of cationic imino groups to keep the charge density constant. These thiolated PEG-PLLs were complexed with pDNA to form the disulfide cross-linked block catiomer polyplexes, which had the size of approximately 100 nm. Both thiolation methods were similarly effective in introducing disulfide cross-links to prevent the polyplex from the dissociation through a counter polyanion exchange in the extracellular oxidative condition. On the other hand, the efficient release of pDNA responding to the reductive condition mimicking the intracellular environment was only achieved for the polyplex thiolated with SPDP, a system compensating for the decrease in the charge density with the disulfide cross-linking. This distinctive sensitivity toward oxidative and reductive environments was nicely correlated with the remarkable difference in the transfection efficiency between these two types of thiolated polyplexes (SPDP and Traut's reagent types): the former revealed approximately 50 times higher transfection efficiency toward 293T cells than the latter. Obviously, the balance between the densities of the cationic charge and disulfide cross-linking in the thiolated polyplex played a crucial role in the delivery and controlled release of entrapped pDNA into the microenvironment of intracellular compartment to achieve the high transfection efficiency.     

Tailor-made poly(amidoamine)s for controlled complexation and condensation of DNA

A set of polymer carriers for DNA delivery was synthesized by combining monodisperse, sequence-defined poly(amidoamine) (PAA) segments with poly(ethylene oxide) (PEO) blocks. The precise definition of the PAA segments provides the possibility of correlating the chemical structure (monomer sequence) with the resulting biological properties. Three different PAA-PEO conjugates were synthesized by solid-phase supported synthesis, and the cationic nature of the PAA segments was systematically varied. This allows for the tailoring of interactions with double-stranded plasmid DNA (dsDNA). The potential of the PAA-PEO conjugates as non-viral vectors for gene delivery is demonstrated by investigating the dsDNA complexation and condensation properties. Depending on the applied carrier, a transition in polyplex (polymer-DNA ion complex) structures is observed. This reaches from extended ring-like structures to highly compact toroidal structures, where supercoiling of the DNA is induced. An aggregation model is proposed that is based on structural investigations of the polyplexes with atomic force microscopy (AFM) and dynamic light scattering (DLS). While the cationic PAA segment mediates primarily the contact of the carrier to the dsDNA, the PEO block stabilizes the polyplex and generates a "stealth" aggregate, as was suggested by Zeta potentials that were close to zero. The controlled aggregation leads to stable, single-plasmid complexes, and stabilizes the DNA structure itself. This is shown by ethidium bromide intercalation assays and DNase digestion assays. The presented PAA-PEO systems allow for the formation of well-defined single-plasmid polyplexes, preventing hard DNA compression and strongly polydisperse polyplexes. Moreover carrier polymers and the resulting polyplexes exhibit no cytotoxicity, as was shown by viability tests; this makes the carriers potentially suitable for in vivo delivery applications.     

Nonviral gene delivery using poly‐D/L aspartate‐diethylenetriamine cationic polymers and polyethylene glycol: A two‐step approach

Cationic polymers have received much attention as promising nonviral vectors for gene transfer. However, development of polymers with low cell toxicities and high transfection efficiencies continue to be a significant problem and a major hurdle to their success. Poly‐D /L aspartate‐diethylenetriamine poly(D /L Asp‐DET) polymers were synthesized and evaluated as nonviral gene delivery agents. Poly(D /L Asp‐DET) polymers display endosome buffering capacity. The polymers condense plasmid DNA above N:P ratios of 1 and form polyplex particles of ～50–100 nm, with zeta potentials between neutral and +40 mV. Transmission electron microscopy shows the polyplexes to be uniform in size and shape. Polyplexes maintain the structural integrity of DNA following incubation in nucleases and also show high transfection efficiencies with minimal toxicity in both HCT‐116 and PC‐3 cell culture. However, it is found that these poly(D /L Asp‐DET)/DNA polyplexes immediately aggregate in salt and serum conditions, making them unsuitable for use in vivo. Therefore, the polyplexes were further modified by covalent addition of polyethylene glycol (PEG). Introduction of this second step produces PEG‐polyplexes of uniform size (below 100 nm), with neutral zeta potentials that are also stable in both salt and serum conditions. These results suggest poly(D /L Asp‐DET) cationic polymers as potentially safe and efficient nonviral gene delivery agents. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Supramolecular nanocarrier of siRNA from PEG-based block catiomer carrying diamine side chain with distinctive pKa directed to enhance intracellular gene silencing

An siRNA nanocarrier formed through self-assembly of PEG-based block catiomer possessing two distinct amino groups with different pKa values in a side chain was developed. This design provided the carrier with a sufficient siRNA complexation and an assumed buffering capacity in the endosomes, allowing it to exhibit remarkable gene knockdown abilities as well as sufficient serum tolerability.     

Redox and acid-base coupling in ultrathin polyelectrolyte films

A single layer of poly(allylamine) with a covalently attached osmium pyridine-bipyridine complex adsorbed onto a Au surface modified by mercaptopropanesulfonate has been studied theoretically with a molecular approach and experimentally by cyclic voltammetry. These investigations have been carried out at different pHs and ionic strengths of the electrolyte solution in contact with the redox polyelectrolyte modified electrode. The theory predicts strong coupling between the acid-base and redox equilibria, particularly for low ionic strength, pH close to the pKa, and high concentration of redox sites. The coupling leads to a decrease in the peak potential at pH values above the apparent pKa of the weak polyelectrolyte, in good agreement with the experimental pH dependence at 4 mM NaNO3. Theoretical calculations suggest that the inflection point in the peak position versus pH curves can be used to estimate the apparent pKa of the amino groups in the polymer. Comparison of the apparent pKa for PAH-Os in the film with that of poly(allylamine) reported in the literature shows that the underlying charged thiol strongly influences charge regulation in the film. A systematic study of the film thickness and the degree of protonation in sulfonate and amino groups for solutions of different pH and ionic strength shows the coupling between the different interactions. It is found that the variation of the film properties has a non-monotonic dependence on bulk pH and salt concentration. For example, the film thickness shows a maximum with electrolyte ionic strength, whose origin is attributed to the balance between electrostatic amino-amino repulsions and amino-sulfonate attractions.     

pH responsive Janus polymeric nanosheets

pH responsive polymeric Janus nanosheets with poly(maleic acid) moiety and crosslinked PS onto the corresponding sides have been synthesized by free radical polymerization. The Janus nanosheets can serve as solid emulsifier to stabilize an oil/water emulsion, whose stability is easily triggered by changing pH across pKa of the poly(maleic acid).     

Fluorinated PEG‐Polypeptide Polyplex Micelles Have Good Serum‐Resistance and Low Cytotoxicity for Gene Delivery

A novel PEGylation polypeptide, poly(ethylene glycol)‐b‐poly(l ‐lysine)‐b‐poly(l ‐cysteine) (PEG‐PLL‐PCys) triblock copolymer is synthesized via the sequential ring‐opening polymerization of amino acid N‐carboxyanhydrides initiated by methoxypolyethylene glycol amine (mPEG‐NH₂, M _w is 2 kDa). Subsequently, the obtained polypeptide is partially conjugated with fluorocarbon chains via disulfide exchange reaction. PLL segment can condense plasmid DNA through an electrostatic force to form a complex core, PEG segment surrounding the complex like a corona can prevent the complex from precipitation and reduce the adsorption of serum, while PCys segment with fluorocarbon can enhance the cellular uptake and the stability of the formed polyplex micelles in physiological conditions. Experiment results exhibit that the fluorinated polypeptides have low cytotoxicity and good gene transfection efficiency even in the presence of 50% fetal bovine serum.

     

Internal structure of a thin film of mixed polymeric micelles on a solid/liquid interface

The adsorption of mixed micelles of poly(4-(2-amino hydrochloride-ethylthio)-butylene)- block-poly(ethylene oxide), PAETB 49- b-PEO 212 and poly(4-(2-sodium carboxylate-ethylthio)-butylene)- block-poly(ethylene oxide), PCETB 47- b-PEO 212 on solid/liquid interfaces has been studied with light, X-ray, and neutron reflectometry. The structure of the adsorbed layer can be described with a two-layer model consisting of an inner layer formed by the coacervate of the polyelectrolyte blocks PAETB 49 and PCETB 47 ( approximately 1 nm) and an outer layer of PEO 212 blocks ( approximately 6 nm). The micelles unfold upon adsorption forming a rather homogeneous flat layer that exposes its polyethylene oxide chains into the solution, thus rendering the surface antifouling after modification with the micelles.     

Minimizing analyte electrolysis in electrospray ionization mass spectrometry using a redox buffer coated emitter electrode

An emitter electrode with an electroactive poly(pyrrole) (PPy) polymer film coating was constructed for use in electrospray ionization mass spectrometry (ESI‐MS). The PPy film acted as a surface‐attached redox buffer limiting the interfacial potential of the emitter electrode. While extensive oxidation of selected analytes (reserpine and amodiaquine) was observed in positive ion mode ESI using a bare metal (gold) emitter electrode, the oxidation was suppressed for these same analytes when using the PPy‐coated electrode. A semi‐quantitative relationship between the rate of oxidation observed and the interfacial potential of the emitter electrode was shown. The redox buffer capacity, and therefore the lifetime of the redox buffering effect, correlated with the oxidation potential of the analyte and with the magnitude of the film charge capacity. Online reduction of the PPy polymer layer using negative ion mode ESI between analyte injections was shown to successfully restore the redox buffering capacity of the polymer film to its initial state. Published in 2010 by John Wiley & Sons, Ltd.     

Swelling behavior of self-assembled monolayers of alkanethiol-terminated poly(ethylene glycol): a neutron reflectometry study

The swelling behavior of alkanethiol-terminated poly(ethylene glycol) with an average molecular weight of 2180 Da (i.e., approximately 45 ethylene glycol, EG, units) in contact with water was investigated by neutron reflectometry as a function of the morphology of the PEG-SH layer. Amorphous films at a low grafting density show significant swelling with an increase of the film thickness from approximately 25 A in the dry state to approximately 70 A in contact with D2O, which corresponds to a total water uptake of approximately 38 mass %. In contrast, quasi-crystalline monolayers exhibit only a small amount of water penetrating into the film (approximately 8 mass %) with a corresponding change of the layer thickness from approximately 110 to approximately 125 A. The water uptake per EG unit corresponds to the literature value of 1.5 for the amorphous layer and to only 0.25 in the case of the quasi-crystalline film.     

Synthesis and characterization of novel pH-responsive microgels based on tertiary amine methacrylates

Emulsion polymerization of 2-(diethylamino)ethyl methacrylate (DEA) in the presence of a bifunctional cross-linker at pH 8-9 afforded novel pH-responsive microgels of 250-700 nm diameter. Both batch and semicontinuous syntheses were explored using thermal and redox initiators. Various strategies were evaluated for achieving colloidal stability, including charge stabilization, surfactant stabilization, and steric stabilization. The latter proved to be the most convenient and effective, and three types of well-defined reactive macromonomers were examined, namely, monomethoxy-capped poly(ethylene glycol) methacrylate (PEGMA), styrene-capped poly[2-(dimethylamino)ethyl methacrylate] (PDMA50-St), and partially quaternized styrene-capped poly[2-(dimethylamino)ethyl methacrylate] (10qPDMA50-St). The resulting microgels were pH-responsive, as expected. Dynamic light scattering and 1H NMR studies confirmed that reversible swelling occurred at low pH due to protonation of the tertiary amine groups on the DEA residues. The critical pH for this latex-to-microgel transition was around pH 6.5-7.0, which corresponds approximately to the known pKa of 7.0-7.3 for linear PDEA homopolymer. The microgel particles were further characterized by electron microscopy and aqueous electrophoresis studies. Their swelling and deswelling kinetics were investigated by turbidimetry. The PDEA-based microgels were compared to poly[2-(diisopropylamino)ethyl methacrylate] (PDPA) microgels prepared with identical macromonomer stabilizers. These PDPA-based microgels had a lower critical swelling pH of around pH 5.0-5.5, which correlates with the lower pKa of PDPA homopolymer. In addition, the kinetics of swelling for the PDPA microgels was somewhat slower than that observed for PDEA microgels; presumably this is related to the greater hydrophobic character of the former particles.     

Highly sensitive indirect photometric detection of cations by capillary electrophoresis with the cationic dye chrysoidine

The cationic dye, chrysoidine, has been used for the first time as a probe for the indirect photometric detection of cations. The dye has been used as a probe at concentrations of 5 mM, which is roughly an order of magnitude higher than for other cationic dyes used previously for the same purpose, in order to minimise electromigrational dispersion. Baseline instability was minimised by a combination of coating the capillary with poly(ethyleneimine), addition of a neutral polymer to the electrolyte, and the application of a small amount (20 mbar) of hydrodynamic pressure during the separation. Separation of a mixture containing alkali metals, alkaline earths, transition metals and lanthanides was achieved by the addition of 2-hydroxyisobutyric and lactic acid as complexing agents. Excellent peak shapes were observed over a wide range of analyte mobilities due to the moderate mobility of the probe. The high absorptivity (26733 l mol(-1) cm(-1)) provided by chrysoidine in comparison with typically used, less absorbing probes, was reflected in limits of detection which were typically less than 0.5 microM. These are amongst the lowest reported using hydrodynamic injection without the use of large volume stacking methods. The use of 2-hydroxyisobutyric and lactic acids as complexing agents at pH values close to their pKa values provided suitable buffering which was highlighted by very good reproducibility of migration time, corrected peak area and peak height.     

聚丙烯酸-b-聚(N-异丙基丙烯酰胺)嵌段共聚物的合成及其温度和pH值敏感性自组装研究

通过原子转移自由基聚合方法, 在丁酮/异丙醇混合溶剂中合成了分子量可控和分布较窄的聚丙烯酸叔丁酯-b-聚N-异丙基丙烯酰胺(PtBA-b-PNIPAM)嵌段共聚物, 用GPC和 1 H NMR对其结构进行了表征. PtBA-b-PNIPAM在甲苯中水解得到聚丙烯酸-b-聚N-异丙基丙烯酰胺(PAA-b-PNIPAM). 用动态光散射技术对PAA-b-PNIPAM在水溶液中的自组装行为随pH值和温度变化的响应进行了初步研究.     

Polyplex Particles Based on Comb‐Like Polyethylenimine/Poly(2‐ethyl‐2‐oxazoline) Copolymers: Relating Biological Performance with Morphology and Structure

The present contribution is focused on feasibility of using comb‐like copolymers of polyethylenimine with poly(2‐ethyl‐2‐oxazoline) (LPEI‐comb‐PEtOx) with varying grafting densities and degrees of polymerization of PEI and PEtOx to deliver DNA molecules into cells. The copolymers form small and well‐defined particles at elevated temperatures, which are used as platforms for binding and condensing DNA. The electrostatic interactions between particles and DNA result in formation of sub‐100 nm polyplex particles of narrow size distribution and different morphology and structure. The investigated gene delivery systems exhibit transfection efficiency dependent on the copolymer chain topology, shape of the polyplex particles, and internalization pathway. Flow cytometry shows enhanced transfection efficiency of the polyplexes with elongated and ellipsoidal morphology. The preliminary biocompatibility study on a panel of human cell lines shows that pure copolymers and polyplexes thereof are practically devoid of cytotoxicity.     

主链含三苯胺单元的聚苯乙炔的合成及其电致发光性能

采用4-甲基三苯胺的二醛基化合物分别与对、间、邻-二甲基苯的膦盐反应,制备了三种含三苯胺单元的聚苯乙炔类共聚物TPA-PPV、TPA-PmPV和TPA-PoPV。结果表明：TPA-PPV和TPA-PmPV具有良好的热稳定性和光电化学性能,该类共聚物不但具有良好的空穴传输性能,而且作为发光材料应用于发光器件时可以调制发光颜色。     

Effect of Head Size in Head‐Tail‐Type Polycations on their in vitro Performances as Nonviral Gene Vectors

Three kinds of head‐tail‐type block copolymers composed of polyamidoamine (PAMAM) dendron heads and poly(L ‐lysine) (PLL) tail blocks (PAMAM dendron‐PLL), having PAMAM dendrons with different generations (G2.5‐PLL, G3.5‐PLL and G4.5‐PLL) were synthesized. Some of the dendron heads were located at polyplex surface, and G2.5‐PLL and G3.5‐PLL could form small polyplexes (less than 150 nm in size). G2.5‐PLL and G3.5‐PLL polyplexes were taken up into the cells more effectively. PAMAM dendron‐PLL that had a larger dendron head could show a more‐effective buffering effect. The in vitro performance of the PAMAM dendron‐PLL polyplexes was controlled by the balance of cellular uptake and endosomal escape by a buffering effect.

     

Medium-throughput pKa screening pharmaceuticals by pressure-assisted capillary electrophoresis

A fast screening method for the determination of the dissociation constants (pKa) of acidic, basic, and multivalent compounds was developed by using pressure-assisted capillary electrophoresis (PACE). External air pressure was applied to shorten the analysis time. The separation efficiency decreases as air pressure increases. However, it was found that air pressure does not affect the measurement of electrophoretic mobility and pKa significantly when it is less than 2 psi. The method was evaluated in terms of accuracy, precision, and ruggedness by using a set of 48 compounds with literature pKa values ranging from 2 to 10. The difference between the measured pKa values and literature values is less than 0.2 units. The throughput is approximately 20 compounds per day with a 12-point measurement ranging from pH 2.5 to 11. It was demonstrated that this method is applicable for pKa screening of pharmaceuticals with diverse chemical structures.     

Revisiting the reactivity of oximate alpha-nucleophiles with electrophilic phosphorus centers. Relevance to detoxification of sarin, soman and DFP under mild conditions

Following a potentiometric determination of the relevant pKa values of the (R1R2)C=NOH functionality, the second order rate constants (k(Ox)) for reaction of a large set of oximate bases with two model organophosphorus esters, i.e. bis-(4-nitrophenyl)phenylphosphonate (BNPPP) and bis-(4-nitrophenyl)methylphosphonate (BNPMP), and three toxic compounds, i.e., sarin (GB), soman (GD) and diisopropylphosphorofluoridate (DFP), in aqueous as well as a 30 : 70 (v/v) H2O-Me2SO mixture have been measured. The corresponding Br?nsted-type nucleophilicity plots of log k(Ox)vs. pKa(Ox) reveal a clear tendency of the reactivity of the oximates to suffer a saturation effect with increasing basicity in aqueous solution. In the case of BNPMP and the three toxic esters, this behaviour is reflected in a levelling off at pKa approximately 9 but a more dramatic situation prevails in the BNPPP system where the attainment of maximum reactivity at pKa approximately 9 is followed by a clear decrease in rate at higher pKa's. Interestingly, a number of data reported previously by different authors for the sarin, soman and DFP systems are found to conform rather well to the curvilinear Br?nsted correlations built with our data. Based on this and previous results obtained for reactions at carbon centers, it can be concluded that the observed saturation effect is the reflection of an intrinsic property of the oximate functionality. An explanation of this behavior in terms of an especially strong requirement for desolvation of the oximates prior to nucleophilic attack which becomes more and more difficult with increasing basicity is suggested. This proposal is supported by the observed changes in pKa(Ox) and k(Ox) brought about by a transfer from H2O to a 30 : 70 H2O-Me2SO mixture. The implications of the saturation effect on the efficiency of oximates as nucleophilic catalysts for smooth decontamination are emphasized. Also discussed is the effect of basicity on the exalted (alpha-effect) reactivity of these bases.