Synthesis and characterization of polyaniline/graphite conducting nanocomposites

A new method for the synthesis of exfoliated graphite and polyaniline (PANI)/graphite nanocomposites was developed. Exfoliated graphite nanosheets were prepared through the microwave irradiation and sonication of synthesized expandable graphite. The nanocomposites were fabricated via the in situ polymerization of the monomer at the presence of graphite nanosheets. The as-synthesized graphite nanosheets and PANI/graphite nanocomposite materials were characterized with Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis (TGA). The conductivity of the PANI/graphite nanocomposites was dramatically increased over that of pure PANI. TGA indicated that the incorporation of graphite greatly improved the thermal stability of PANI. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1972–1978, 2004     

PANI/Ce(OH)3-Pr2O3·3H2O/NanoG复合材料制备与表征

开发了反胶束模板-原位聚合纳米复合法制备聚苯胺(PANI)/Ce(OH)3-Pr2O3·3H2O/石墨纳米薄片(NanoG)纳米复合材料的方法.膨胀石墨在乙醇水溶液中经超声处理制得石墨纳米薄片,以苯胺的氯仿溶液为油相,稀土金属离子Pr3+、Ce3+水溶液为水相,依靠表面活性剂十六烷基三甲基溴化铵(CTAB)自组装形成的反胶束为模板-制备PANI/Ge(OH)3-Pr2O3·3H2O/NanoG复合材料.利用红外光谱(FTIR)、扫描电镜(SEM)、透射电镜(TEM)和 X-射线衍射(XRD)对该复合材料进行了表征和分析,研究了其导电性能和热性能.结果表明,PANI/Ce(OH)3-Pr2O3·3H2O/NanoG复合材料各相分散均匀,稀土纳米粒子在体系中以棒状的形态分布.热重分析表明,该复合材料的热稳定性明显提高;导电性研究说明,石墨纳米薄片的特殊的结构(较大的径厚比)对其在聚合物基体中形成导电网络具有重要作用;PANI/Pr2O3-Ce(OH)3/NanoG纳米复合材料的渗滤阀值低于1.0wt%.     

PMMA/graphite nanosheets composite and its conducting properties

Graphite nanosheets (NanoG) were prepared by treating the expanded graphite with sonication in aqueous alcohol solution. Nanocomposites of poly(methyl methacrylate) (PMMA) with NanoG were prepared via an in situ polymerization of MMA in the presence of NanoG with the aid of sonication. The nanocomposites were then dispersed with chloroform (CHCl₃) and casted on glass slides to form conducting films. The percolation threshold of PMMA/NanoG conducting films at room temperature was as low as 0.31 vol%, much lower than that of the composites filled with conventional graphite particles. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area diffraction (SAD) and etc. were used to characterize the structure of the graphite nanosheets and the nanocomposites. Results showed that the high-aspect-ratio structure of graphite nanosheets played an important role in forming conducting network in PMMA matrix. The conducting behavior of the composite was interpreted by percolation theory.     

纳米石墨薄片/聚吡咯复合材料的制备及导电性能

膨胀石墨经过超声处理制备了纳米石墨薄片。以其为导电填料，对甲苯磺酸为掺杂剂，FeCl₃·6H₂O为氧化剂，引发吡咯单体发生原位聚合，制备出纳米石墨薄片/聚吡咯(NanoGs/PPy)复合材料。利用红外光谱(FTIR)、扫描电镜(SEM)和透射电镜(TEM)表征了材料的组成和结构。结果表明，石墨薄片被聚吡咯完全包覆；并且以纳米级尺寸分散在聚吡咯基体中。热失重(TG)分析和电导率测试结果表明，复合材料的耐热性能和导电性能较纯聚吡咯有所提高。     

Polyethylene/graphite nanocomposites obtained by in situ polymerization

The synthesis of polyethylene/graphite nanocomposites by in situ polymerization was achieved using the catalytic system Cp₂ZrCl₂ (bis(cyclopentadienyl)zirconium(IV) dichloride)/methylaluminoxane (MAO). Graphite with nano dimensions, previously treated with MAO, was added into the reactor as filler at percentages of 1, 2, and 5% (w/w). XRD analysis showed that the chemical and thermal treatments employed preserve the structure of the graphite sheets. The formation of graphite nanosheets and nanocomposites was confirmed by TEM and AFM. TEM micrographics showed that the polyethylene grew between the graphene nanosheets, giving intercalated and exfoliated graphite nanocomposites. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 692–698, 2010     

聚丙烯/石墨纳米复合材料的导电性能研究

磨盘碾磨固相剪切复合技术(S3C)是制备聚合物 石墨导电复合材料的有效途径,所得聚丙烯 膨胀石墨复合材料具有纳米插层复合结构,石墨纳米片层的相互搭接可形成导电网络,具有纳米间隙的石墨插层结构可形成隧道电流,从而大幅度降低复合体系的导电逾渗阈值,在低填充量实现聚合物复合材料高电导性,与熔体共混相比,导电逾渗阈值由4 .3vol%降低到0 . 5 5vol% ,在石墨含量为4 .0 1vol%时,电导率提高10个数量级.     

Thermal performance of poly(ethylene disulfide)/expanded graphite nanocomposites

In this study, the influences of expanded graphite oxide (EG) nanosheets presence with and without surfactant on structural and thermal performance of poly(ethylene disulfide) (PEDS)-based nanocomposites are investigated. Sodium dodecylbenzenesulfonate (SDBS) is used as a surfactant for the preparation of modified-EG nanosheets. The structural, morphological, and thermal properties of prepared nanocomposites are studied using X-ray diffraction (XRD), scanning electron microscopy, and differential scanning calorimetry techniques, respectively. XRD patterns of nanocomposites reveal that a high degree of expanded graphite nanosheets dispersion is achieved with and without surface modification using in situ polymerization method. Moreover, the presence of immobilized polysulfide chains near the interface region of nanosheets is suggested as a possible reason for the observed increase in the number of semi-crystalline organic fractions in the structure of PEDS via EG nanosheets incorporation. In addition, the morphology of SDBS-modified-EG loaded nanocomposite shows a smoother fracture surface than unmodified-nanosheets reinforced nanocomposite. Therefore, more interactions between nanosheets and polysulfide chains are expected in the structure of unmodified-EG reinforced nanocomposite. Moreover, thermal resistance and degradation kinetics of prepared nanocomposites are studied using thermogravimetric analysis results and degradation activation energy calculations, respectively. The required activation energy for the degradation process of SDBS-EG loaded nanocomposite is about 140 kJ mol^?1 lower than the required degradation activation energy of unmodified-nanosheets reinforced nanocomposite.     

Synthesis of graphite nanosheets/AgCl/polypyrrole composites via two-step inverse microemulsion method

An effective process for the synthesis of graphite nanosheets/AgCl/polypyrrole (NanoGs/AgCl/PPy) composites was developed. NanoGs were prepared by treating the expanded graphite with sonication in aqueous alcohol solution. Then nanocomposites were fabricated via in situ polymerization of pyrrole in the presence of NanoGs and AgCl particles through two-step sequentially inverse microemulsion method. The nanoscale dispersion of NanoGs and AgCl particles was evidenced by the SEM and TEM examinations. From the thermogravimetric analysis, the introduction of inorganic nano-AgCl and NanoGs exhibited a beneficial effect on the thermal stability of pure PPy. According to the four-point-probe test, the conductivity of the final NanoGs/AgCl/PPy composites was dramatically increased compared with pure PPy.     

Ternary Ag/Polyaniline/Au nanocomposites: Preparation,characterization and electrochemical properties

Ternary Ag/Polyaniline/Au nanocomposites were synthesized successfully by immobilizing of Au nanoparticles (NPs) on the surface of Ag/Polyaniline (PANI) nanocomposites. Ag/PANI nanocomposites were prepared via in situ chemical polymerization of aniline in the presence of 4-aminothiophenol (4-ATP) capped silver colloidal NPs. Then, uniform gold (Au) NPs were assembled on the surface of resulted Ag/PANI nanocomposites through electrostatic interaction to get Ag/Polyaniline/Au nanocomposites. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), ultraviolet visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). Moreover, Ag/PANI/Au nanocomposites were immobilized on the surface of a glassy carbon electrode and showed enhanced electrocatalytic activity for the reduction of H₂O₂ compared with Ag/PANI.     

不同质子酸掺杂对银/聚苯胺纳米复合材料结构和导电性的影响

利用紫外光作为辅助条件,在反胶束体系中采用一步双原位法合成了硝酸(HNO3)、对甲基苯磺酸(TSA)和5-磺基水杨酸(SSA)掺杂的银/聚苯胺(Ag/PANI)纳米复合材料.通过对复合材料进行红外光谱(FTIR)、紫外光谱(UV-Vis)、扫描电镜(SEM)、X射线衍射(XRD)和导电性能的测试,研究了不同质子酸对Ag/PANI纳米复合材料结构、形貌和导电性能的影响.测试结果表明,3种酸掺杂制备的Ag/PANI纳米复合材料均为聚苯胺包覆银粒子的核-壳结构.不同的质子酸掺杂会对Ag/PANI纳米复合材料的电性能有重要影响.在3种酸掺杂的复合材料中,TSA掺杂的复合材料的电导率最佳,为215.14 S·cm-1.     

Synthesis and Characterization of PANI/ZnO Nanocomposites

This paper presents our results on the successful fabrication of HCl‐doped polyaniline (PANI)/ZnO nanocomposites via an electrochemical synthesis route. Different weight percents of ZnO nanoparticles were uniformly dispersed in the PANI matrix. The interaction between the dispersed ZnO nanoparticle and PANI was studied using X‐ray diffraction, ultraviolet–visible absorption spectroscopy, photoluminescence (PL) spectroscopy, X‐ray photoelectron spectroscopy, atomic force microscopy, thermogravimetry, and transmission electron microscopy. It is shown that the doping state of the PANI/ZnO nanocomposite is highly improved as compared to that of PANI. The dispersed PANI/ZnO nanocomposites exhibit enhanced PL behavior and thermal stability.     

Cerium dioxide/polyaniline core-shell nanocomposites

The preparation of CeO2/polyaniline (CeO2/PANI) core-shell nanocomposites via chemical oxidation of aniline using CeO2 as an oxidant is reported. TEM, TGA, FT-IR, XPS, and conductivity measurement are used to characterize the resulting composites. TEM measurements reveal that the shape of PANI/CeO2 nanocomposites is different from CeO2 nanoparticles and fibular PANI oxidized with soluble oxidant. Electron diffraction (ED) patterns of CeO2/PANI nanocomposites reveal single crystal of CeO2. FT-IR spectra confirmed the formation of PANI; the amount of PANI in the nanocomposites is estimated by TGA results. The conductivities increase with the increasing ratio of PANI/CeO2. XPS results reveal that in the nanocomposites Ce4+ of CeO2 is reduced to Ce3+. In addition, the degree of protonation of polyaniline obtained from N 1s XPS results in cerium dioxide/polyaniline composites is about 48.52%.     

High‐Conductivity Two‐Dimensional Polyaniline Nanosheets Developed on Ice Surfaces

A new method to develop two‐dimensional PANI nanosheets using ice as a removable hard template is presented. Distinctly high current flows of 5.5 mA at 1 V and a high electrical conductivity of 35 S cm^?1 were obtained for the polyaniline (PANI) nanosheets, which marked a significant improvement from previously values on other PANIs reported over the past decades. These improved electrical properties of ice‐templated PANI nanosheets were attributed to the long‐range ordered edge‐on π‐stacking of the quinoid ring, ascribed to the ice surface‐assisted vertical growth of PANI. The unprecedented advantages of the ice‐templated PANI nanosheets are two‐fold. First, the PANI nanosheet can be easily transferred onto various types of substrates via float‐off from the ice surfaces. Second, PANI can be patterned into any shape using predetermined masks, and this is expected to facilitate the eventual convenient and inexpensive application of conducting polymers in versatile electronic device forms.     

Chemically modified polyaniline nanocomposites by poly(2-acrylamido-2-methyl-1-propanesulfonicacid)/graphene nanoplatelet

New conducting polyaniline (PANI) nanocomposites that were chemically modified by poly(2-acrylamido-2-methyl-1-propanesulfonicacid) (PMP) and graphene nanoplatelets (GNPs) were prepared via in situ deposition. PMP was first synthesized using GNPs, and aniline hydrochloride monomer was then polymerized in the presence of PMP-GNPs. The nanopolymer composites were characterized, and its structural morphology was analyzed via transmission electron microscopy and scanning electron microscopy. Fourier transformation infrared spectroscopy results indicate a strong interaction between PANI, PMP, and GNPs. To understand the conduction behavior of the composites, temperature-dependent DC electrical conductivity was measured between 295 K and 503 K, and the mechanism of transport properties of the new composites was analyzed by Mott’s variable range of hopping model. The PANI/PMP-GNP showed higher conductivity than pure PANI polymer. The high electrical conductivity of the nanocomposites may be useful in fabricating multifunctional materials in bulk for future technological applications.     

聚苯胺/离子液体/蒙脱土纳米复合材料的制备及其导电性能研究

采用1-羧甲基-3-甲基咪唑氯化盐离子液体对钠化蒙脱土进行插层改性,然后用苯胺的盐酸溶液进行二次插层,以过硫酸铵为氧化剂,盐酸溶液为掺杂剂,使进入离子液体/蒙脱土(CMMIm/MMT)层间的苯胺(An)发生氧化聚合反应,制备了一种具有良好导电性的聚苯胺/离子液体/蒙脱土复合材料(PANI/CMMIm/MMT).用红外光谱、X-射线衍射,热重分析和DSC对样品进行了表征.结果表明当离子液体/蒙脱土用量为7.5%、盐酸浓度为1mol/L、过硫酸铵与苯胺的摩尔比为1∶1、0℃下反应6h时制备的PANI/CMMIm/MMT纳米复合材料电导率最高,达到了0.3S/cm,是相同条件下聚苯胺/钠化蒙脱土纳米复合材料电导率的2.5倍,聚苯胺的7.5倍.     

High-performance supercapacitor electrode based on a nanocomposite of polyaniline and chemically exfoliated MoS<Subscript>2</Subscript> nanosheets

In this study, MoS₂ nanosheets were first prepared by exfoliating its bulk material in HCl/LiNO₃ solution with a yield of 45%, and then a facile strategy was developed to synthesize polyaniline/MoS₂ (PANI/MoS₂) nanocomposite via in situ polymerization. Structural and morphological characterizations of MoS₂ nanosheets and the nanocomposite were investigated by scanning electron microscope (SEM), transmission electron microscope (TEM), and X-ray powder diffraction. The results of SEM illustrated that orderly sawtooth polyaniline (PANI) nanoarrays were formed on the surface of MoS₂ nanosheets. The nanocomposite displayed good electrochemical performance as a supercapacitor electrode material. The specific capacitance reached 560 F/g at a current density of 1.0 A g^?1 in 1.0 M H₂SO₄ solution. Such good performance is because that the MoS₂ nanosheets provided a highly electrolytic accessible surface area for redox-active PANI and a direct path for electrons.     

Effect of polyaniline as a surface modifier of TiO2 nanoparticles on the properties of polyvinyl chloride/TiO2 nanocomposites

Surface of TiO2 nanoparticles was modified with the in situ chemical oxidative polymerization of aniline. Polyaniline modified TiO2 nanoparticles (PANI-TiO2 ) were characterized with the FT-IR, XRD, SEM and TEM techniques. Results confirmed that PANI was grafted successfully on the surface of TiO2 nanoparticles, therefore agglomeration of nanoparticles decreased dramatically. Polyvinyl chloride nanocomposites filled with 1 wt% 5 wt% of PANI-TiO2 and TiO2 nanoparticles were prepared via the solution blending method. PVC nanocomposites were analyzed with FT-IR, XRD, SEM, TG/DTA, DSC and tensile test techniques. Effect of PANI as surface modifier of nanoparticles was discussed according to the final properties of PVC nanocomposites. Results demonstrated that deposition of PANI on the surface of TiO2 nanoparticles improved the interfacial adhesion between the constituents of nanocomposites, which resulted in better dispersion of nanoparticles in the PVC matrix. Also PVC/PANI-TiO2 nanocomposites showed higher thermal resistance, tensile strength and Young’s modulus compared to those of unfilled PVC and PVC/TiO2 nanocomposites.     

聚苯胺/Co_(0.5)Zn_(0.5)Fe_2O_4纳米复合材料的制备及电磁性能

采用高分子凝胶法制备尖晶石型Co0.5Zn0.5Fe2O4,原位聚合法制备纯聚苯胺和聚苯胺/Co0.5Zn0.5-Fe2O4纳米复合材料.使用傅立叶红外光谱(FTIR)、紫外可见吸收光谱(UV-Vis)、X射线衍射仪(XRD)和透射电子显微镜(TEM)对复合材料进行了表征.FTIR和XRD的结果表明样品为纯聚苯胺和聚苯胺/Co0.5Zn0.5-Fe2O4.UV-Vis光谱表明聚苯胺/Co0.5Zn0.5Fe2O4苯环上的π-π*和n-π*分别红移了23nm和5nm.TEM照片可知,聚苯胺和聚苯胺/Co0.5Zn0.5Fe2O4粒子的平均粒径分别约为50nm和70nm.在8.2～12.4GHz测试频率范围内,聚苯胺/Co0.5Zn0.5Fe2O4的ε″数值在9.2～12.3之间,u″数值在0.15～0.16之间;聚苯胺/Co0.5-Zn0.5Fe2O4介电损耗低于纯聚苯胺,而磁损耗高于纯聚苯胺.     

Improved stability and dispersity of ZnO@PANI nanocomposites aqueous suspension

The high dispersion and stability of a nanocomposites suspension are required as a crucial factor in many of their applications. In this study, ZnO nanosheets covered with polyaniline (PANI) thin layer (ZnO@PANI) were synthesized by a simple in‐situ polymerization. The as‐prepared ZnO@PANI powders were well characterized by XRD, Raman, FTIR, XPS and photoluminescence spectra, as well as SEM and TEM techniques. The effect of PANI incorporation on the chemical dissolution and dispersing stability of ZnO aqueous suspension was investigated. Dissolution experiments showed that the dissolution of ZnO was effectively restrained by the surface‐hybridized PANI layer. ZnO@PANI suspension can be more stable in a wider pH range. Dynamic Light Scattering (DLS) analysis indicated that ZnO@PANI particles were thoroughly dispersed in the neutral and alkaline solution as proven by the emergence of a single distribution with a high diffused intensity. Sedimentation experiments suggested that ZnO@PANI suspension was a more stable dispersion taking into account the effect of pH and ionic strength.     

Radar Absorption Properties of Ni0.5Zn0.5Fe2O4/PANI/epoxy Nanocomposites

A nitrate? citrate gel was prepared from metallic nitrates and citric acid by sol? gel process and was further used to synthesize Ni_0.5Zn_0.5Fe₂O₄ nanocrystalline powder by auto‐combustion. Then, two novel 15 and 35% (w/w) magnetic Ni_0.5Zn_0.5Fe₂O₄ containing polyaniline nanocomposites, named as PANI‐Ni15 and PANI‐Ni35, respectively, were prepared via in‐situ polymerization of aniline in an aqueous solution containing proper amount of Ni_0.5Zn_0.5Fe₂O₄ magnetic powder. The incorporation of the nanopowders to PANI matrix was confirmed by X‐ray diffraction (XRD), IR and SEM. Synthesized PANI‐NiZn ferrite composite particles were subsequently added to an epoxy resin matrix to produce related nanocomposites. The morphological properties of these nanocomposite materials were investigated by SEM and TEM. The electromagnetic‐absorbing properties were studied by measuring the reflection loss in the frequency range of 8.0 to 12.0 GHz. Results showed the reflection loss of the PANI‐Ni35 composite is higher than pure polyaniline and PANI‐Ni15. The good reflection loss of the nanocomposites suggests their potential applicability as radar absorber.