电化学石英晶体微天平研究碱性介质中单层级铂原子修饰的金电极上甲醇的电催化氧化

通过在Au电极表面欠电位沉积(UPD)Cu、再与Pt源(H2PtCl6或K2PtCl4)进行置换反应,制得单层级Pt原子修饰的金电极(对H2PtCl6或K2PtCl4,所制电极分别记为Pt(CuUPD-Pt4+)n/Au或Pt(CuUPD-Pt2+)n/Au,n表示欠电位沉积-置换过程的重复次数).用电化学石英晶体微天平(EQCM)技术定量研究了所制电极,评估了其在碱性环境中催化甲醇氧化的质量比活性(SECA).结果表明,以H2PtCl6为Pt源所制电极(Pt(CuUPD-Pt4+)3/Au)的活性更高,最大SECA高达35.7mAμg-1.根据EQCM结果计算了置换效率,籍此讨论了Pt原子在Au电极表面的层层组装结构,发现所制电极表面的裸Au位点分布百分数与实验结果(由AuOx还原峰电量测算)吻合.我们认为,EQCM技术是一种定量研究电极支撑的超薄催化剂的有效手段,这种高效的单层级贵金属催化剂有望在生物、能源、环境相关的电催化研究中进一步应用.     

甲醇在欠电位沉积Ru修饰Pt电极上的催化氧化

采用欠电位沉积(upd)方法在Pt 表面沉积亚单层的Ru制备出upd-Ru/Pt 电极. 通过欠电位沉积前后电极在0.5 mol·L-1 H2SO4溶液中循环伏安图-152 - 128 mV(vs Ag/AgCl)电位范围内对氢区的数值积分确定Pt表面Ru 的覆盖度. 用电化学方法测试了甲醇在upd-Ru/Pt电极上的催化氧化, 并讨论分析了欠电位沉积电位和Ru的表面覆盖度对甲醇氧化的影响. 结果表明, Ru能够欠电位沉积到Pt表面. Pt表面欠电位沉积少量的Ru 即能大大促进甲醇的氧化.只要控制upd-Ru的沉积量, upd-Ru原子就能大大促进甲醇氧化而与沉积电位无关. Ru原子对甲醇氧化的促进作用与Ru和Pt是否形成合金无关, 而取决于Ru 在Pt表面的百分含量.     

Pt单层修饰Pd/C氧还原催化剂

分别利用液相热解法和浸渍还原法制备了碳载钯纳米催化剂（Pd/C）,并研究了其对氧还原反应的电催化活性。与浸渍还原法相比,液相热解法得到的Pd/C催化剂虽然粒径较大,但表现出较好的氧还原反应（ORR）活性和稳定性.在所制备的Pd/C催化剂基础上,通过置换欠电势沉积的Cu原子单层,获得了Pt单层修饰的Pd/C催化剂,其ORR活性较Pd/C催化剂有显著提高,且与纯Pt/C催化剂接近,而其耐久性则较纯Pt/C催化剂有显著提升,显示出Pt单层催化剂的潜在优势.     

Cu~(2+)对质子交换膜燃料电池氧电极性能的影响

以旋转圆盘电极模拟PEMFC阴极,计时库仑、循环伏安、线性扫描等电化学方法研究Cu2+电解液对碳载铂催化剂电化学活性和氧还原性能的影响.结果表明,在恒电位0.49 V下,Pt/C催化剂活性比表面(ECA)明显减小,此际基底可能发生Cu欠电位沉积,从而掩盖催化剂的活性比表面;数据拟合指明Cu欠电位沉积占据催化剂表面部分氧原子吸附点位,使该点位桥式吸附的氧原子转变为顶式吸附氧原子.     

Ru膜上Pt层的自发沉积及其在电化学表面增强红外光谱中的应用

采用自发沉积法在Ru膜上生成超薄Pt层(简称Ru/Pt膜), 即在开路状态下将电化学还原后的Ru膜浸于除去氧的H2PtCl6溶液中进行自发沉积. 电化学伏安法测量表明, 随着电还原-自发沉积循环次数的增加, 该Ru/Pt膜电极所含Pt组分增加, 且CO吸附层的电氧化峰电位较Pt膜电极上的明显负移. 应用现场衰减全反射表面增强红外光谱法(ATR-SEIRAS)可轻易检测到在该膜电极Pt和Ru位上吸附CO的振动谱峰. 所制Ru/Pt膜电极不仅对CO的电催化氧化具有协同效应, 还可应用于现场ATR-SEIRAS的研究中.     

Nafion含量与阴离子吸附对于铂单原子层核壳结构催化剂制备的影响

本实验利用铜的欠电位沉积技术,在旋转圆盘电极上以碳负载的钯纳米颗粒为核,制备铂单原子层核壳结构催化剂. 电化学测试用于表征不同Nafion含量的添加对于核壳结构催化剂制备的影响. 实验证明,Nafion的存在会影响铜的欠电位沉积,铂与铜的置换反应,并决定最终制备的核壳结构催化剂的氧还原催化反应的活性. 当催化剂薄层中Nafion的含量低于5%的时候,添加Nafion不但可以帮助催化剂附着在旋转圆盘电极表面,而且可以保证制备的催化剂具有较好的氧还原反应催化活性. 在H₂SO₄溶液中,钯纳米颗粒的表面存在特殊的阴离子吸/脱附电化学信号峰,这些信号峰可以用来监测Nafion含量对于铂单原子层核壳结构催化剂制备的影响.     

Pt电采上吸附原子对仲丁醇电催化氧化性能的影响

运用电化学循环伏安和石英晶体微天平研究了HClO4溶液仲丁醇在Pt电极及以Sb和S吸附原子修饰的Pt(Pt/Sbad和Pt/Sad）电极上的电催化氧化过程，从电极表面质量变化可以看出，仲丁醇的氧化与电极表面的氧物种表面的氧物种有着极其密切的关系，Pt电极表面Sb吸附原子可在较低的电位下吸附氧，明显提高仲丁醇的氧化活性，与Pt电极相比，Sb吸附原子修饰的Pt电极使仲丁醇氧化的峰电位负移约100mV，相反，Pt电极表面S吸附原子的氧化会消耗表面氧物种，抑制仲丁醇的氧化，从电极表面质量变化提供了吸附原子电催化作用的数据。     

Pt电极上吸附原子对仲丁醇电催化氧化性能的影响

运用电化学循环伏安和石英晶体微天平研究了HClO4溶液中仲丁醇在Pt电极及以Sb和S吸附原子修饰的Pt(Pt/Sbad和Pt/Sad)电极上的电催化氧化过程 .从电极表面质量变化可以看出 ,仲丁醇的氧化与电极表面的氧物种有着极其密切的关系 .Pt电极表面Sb吸附原子可在较低的电位下吸附氧 ,明显提高仲丁醇的氧化活性 .与Pt电极相比 ,Sb吸附原子修饰的Pt电极使仲丁醇氧化的峰电位负移约 10 0mV .相反 ,Pt电极表面S吸附原子的氧化会消耗表面氧物种 ,抑制仲丁醇的氧化 .从电极表面质量变化提供了吸附原子电催化作用的数据     

Sb在Cu单晶电极上欠电位沉积的电化学和现场STM研究

应用循环伏安法和现场扫描隧道显微镜研究了在HClO4和H2SO4两种溶液中Sb于Cu(111)和Cu(100)电极上的欠电位沉积.结果表明,不同的表面原子排列和强吸附阴离子的存在将明显影响Sb的欠电位沉积行为.在结构较为开放的Cu(100)表面,Sb形成的欠电位沉积层结构也较为开放,并且伴随着表面合金的形成;而在密堆积的Cu(111)表面上,Sb形成了致密的单层结构.又当Cu(111)表面存在强吸附的SO42-时,Sb原子首先在SO42-吸附层与Cu表面交接的新台阶处成核,随后通过取代SO42-向上一层晶面发展,表现出独特的成核—生长行为;而在弱吸附的HClO4溶液中,Sb的欠电位沉积系以在晶面上随机形成一些单原子层高度的Sb岛为特征.在Cu(100)表面,通过SO42-的诱导共吸附,欠电位沉积的Sb原子形成了开放性更大的(4×4)结构,不同于在HClO4溶液中所形成的(22×22)R45°结构.     

Nafion含量与阴离子吸附对于铂单原子层核壳结构催化剂制备的影响（英文）

本实验利用铜的欠电位沉积技术,在旋转圆盘电极上以碳负载的钯纳米颗粒为核,制备铂单原子层核壳结构催化剂.电化学测试用于表征不同Nafion含量的添加对于核壳结构催化剂制备的影响.实验证明,Nafion的存在会影响铜的欠电位沉积,铂与铜的置换反应,并决定最终制备的核壳结构催化剂的氧还原催化反应的活性.当催化剂薄层中Nafion的含量低于5%的时候,添加Nafion不但可以帮助催化剂附着在旋转圆盘电极表面,而且可以保证制备的催化剂具有较好的氧还原反应催化活性.在H_2SO_4溶液中,钯纳米颗粒的表面存在特殊的阴离子吸/脱附电化学信号峰,这些信号峰可以用来监测Nafion含量对于铂单原子层核壳结构催化剂制备的影响.     

Copper-enriched palladium-copper alloy nanoparticles for effective electrochemical formic acid oxidation

In this work, Pd-Cu alloy nanoparticles (NPs) with different atomic ratios are prepared on functionalized carbon nanotubes (CNTs) and applied as electrocatalysts for formic acid oxidation. The Cu-enriched Pd-Cu alloy NPs exhibit improved electrocatalytic activity and stability. Functionalized carbon supports are applied as substrates to tune the nanoscale morphologies of the obtained bimetallic phases under appropriate calcination and hydrogenation treatments. Spill-over effect aids a reduction of a high weight loading of Cu in its metallic phase, in turn, these Cu atoms integrate into Pd lattice and isolate Pd neighbouring atoms. Surface analyses show that a certain amount of the isolated Pd remains on the surfaces of Pd-Cu alloy NPs, which is responsible for the enhanced electrocatalytic performance.     

Electrochemical Designing of Au/Pt Core Shell Nanoparticles as Nanostructured Catalyst with Tunable Activity for Oxygen Reduction

Au/Pt core shell nanoparticles (NPs) have been prepared via a layer‐by‐layer growth of Pt layers on Au NPs using underpotential deposition (UPD) redox replacement technique. A single UPD Cu monolayer replacement with Pt(II) yielded a uniform Pt film on Au NPs, and the shell thickness can be tuned by controlling the number of UPD redox replacement cycles. Oxygen reduction reaction (ORR) in air‐saturated 0.1 M H₂SO₄ was used to investigate the electrocatalytic behavior of the as‐prepared core shell NPs. Cyclic voltammograms of ORR show that the peak potentials shift positively from 0.32 V to 0.48 V with the number of Pt layers increasing from one to five, suggesting the electrocatalytic activity increases with increasing the thickness of Pt shell. The increase in electrocatalytic activity may originate mostly from the large decrease of electronic influence of Au cores on surface Pt atoms. Rotating ring‐disk electrode voltammetry and rotating disk electrode voltammetry demonstrate that ORR is mainly a four‐electron reduction on the as‐prepared modified electrode with 5 Pt layers and first charge transfer is the rate‐determining step.     

Supported Pd-Cu bimetallic nanoparticles that have high activity for the electrochemical oxidation of methanol

Monodisperse bimetallic Pd-Cu nanoparticles with controllable size and composition were synthesized by a one-step multiphase ethylene glycol (EG) method. Adjusting the stoichiometric ratio of the Pd and Cu precursors afforded nanoparticles with different compositions, such as Pd(85)-Cu(15), Pd(56)-Cu(44), and Pd(39)-Cu(61). The nanoparticles were separated from the solution mixture by extraction with non-polar solvents, such as n-hexane. Monodisperse bimetallic Pd-Cu nanoparticles with narrow size-distribution were obtained without the need for a size-selection process. Capping ligands that were bound to the surface of the particles were removed through heat treatment when the as-prepared nanoparticles were loaded onto a Vulcan XC-72 carbon support. Supported bimetallic Pd-Cu nanoparticles showed enhanced electrocatalytic activity towards methanol oxidation compared with supported Pd nanoparticles that were fabricated according to the same EG method. For a bimetallic Pd-Cu catalyst that contained 15?% Cu, the activity was even comparable to the state-of-the-art commercially available Pt/C catalysts. A STEM-HAADF study indicated that the formation of random solid-solution alloy structures in the bimetallic Pd(85)-Cu(15)/C catalysts played a key role in improving the electrochemical activity.     

The use of galvanic displacement in synthesizing Pt(Cu) catalysts with the core-shell structure

The formation of a Pt(Cu) bimetallic catalyst on the carbon support by galvanic displacement of copper electrodeposits with platinum (PtCl ₆ ^2? as the displacing agent) is systematically studied. Composition, structure, and electrocatalytic properties of samples corresponding to different stages of copper displacement are analyzed. For substantially long displacement times, the formation of stable Pt(Cu)_st particles with the atomic ratio Pt: Cu ≈ 7: 3 is observed. The Pt(Cu)_st/C electrodes are shown to be close to the Pt/C electrode as regards the adsorption of hydrogen and copper atoms and the specific activity in methanol oxidation (with 0.5 M H₂SO₄ as the supporting electrolyte). Such electrocatalytic behavior of Pt(Cu)_st particles makes it possible to infer the formation of the “core(Pt, Cu)-shell(Pt)” structure, as confirmed by the XPS data.     

One-step synthesis of carbon-supported Pd–Pt alloy electrocatalysts for methanol tolerant oxygen reduction

A facile, one-step reduction route was developed to synthesize Pd-rich carbon-supported Pd–Pt alloy electrocatalysts of different Pd/Pt atomic ratios. As-prepared Pd–Pt/C catalysts exhibit a single phase fcc structure and an expansion lattice parameter. Comparison of the oxygen reduction reaction (ORR) on the Pd–Pt/C alloy catalysts indicates that the Pd₃Pt₁/C bimetallic catalyst exhibits the highest ORR activity among all the Pd–Pt alloy catalysts and shows a comparative ORR activity with the commercial Pt/C catalyst. Moreover, all the Pd–Pt alloy catalysts exhibited much higher methanol tolerance during the ORR than the commercial Pt/C catalyst. High methanol tolerance of the Pd–Pt alloy catalysts could be attributed to the weak adsorption of methanol induced by the composition effect, to the presence of Pd atoms and to the formation of Pd-based alloys.     

Oxygen reduction reaction on the low index planes of palladium electrodes modified with a monolayer of platinum film

Oxygen reduction reaction (ORR) has been studied on the low index planes of Pd modified with a monolayer of Pt (Pt/Pd(hkl)) in 0.1 M HClO₄ with the use of hanging meniscus rotating disk electrode. The activity for ORR on bare Pd(hkl) electrode depends on the surface structure strongly, however, voltammograms of ORR on Pt/Pd(hkl) electrodes do not depend on the crystal orientation. The specific activities of Pt/Pd(hkl) electrodes at 0.90 V (RHE) are higher than that on Pt(1 1 0) which has the highest activity for ORR in the low index planes of Pt. The mass activity on Pt/Pd(hkl) electrode is 7 times as high as a commercial Pt/C catalyst.     

一种金属单晶电极制备方法的建立和Cu2+在铂单晶上UPD过程的研究

同种材料而表面结构不同的电极往往有完全不同的电化学性能.使用在原子水平上表面结构明确的单晶电极不仅有助于对电极表面吸脱附过程、电场作用下表面结构重组、双电层微观结构、分子水平上的反应机理等基础理论进行深入研究,且对高选择性、高效电催化剂的研制也有指导意义.单晶电化学研究的基础就是制备定向不同的单晶电极.本文建立了金属单晶电极制备方法,并报道了Cu²⁺在Pt单晶电极上UPD(欠电位沉积)过程的研究结果.     

Effect of elemental composition of PtPd bimetallic nanoparticles containing an average of 180 atoms on the kinetics of the electrochemical oxygen reduction reaction

PtPd bimetallic nanoparticles containing an average of 180 atoms and composed of seven different Pt:Pd ratios have been prepared within sixth-generation, hydroxyl-terminated, poly(amidoamine) dendrimers. Transmission electron microscopy indicates that the sizes of all seven nanoparticle compositions are within +/-0.2 nm of one another and the calculated size. Single-particle energy-dispersive spectroscopy shows that the elemental composition is determined by the ratio of the Pt and Pd precursor salts used to prepare the nanoparticles. Cyclic voltammetry and rotating disk voltammetry measurements show that the Pt:Pd ratio of the nanoparticles determines their efficiency for the oxygen reduction reaction (ORR). The maximum activity for the ORR occurs at a Pt:Pd ratio of 5:1, which corresponds to a relative mass activity enhancement of 2.4 compared to otherwise identical monometallic Pt nanoparticles.     

SERS and FT-IR studies of CO adsorbed on underpotential deposited Ag/Pt electrodes

CO adsorbed on UPD and OPD (under- and overpotential deposited) Ag layers on a Pt electrode surface was studied by SERS and IRRAS in conjunction with cyclic voltammetry. Electrochemical activation of a uniform UPD Ag adlayer produced Ag clusters on the Pt electrode as well as bare Pt sites. The strong adsorption of CO on the UPD Ag/Pt electrode compared with a bulk Ag electrode is explained by the influence of the substrate Pt atoms. The degree of electron back-donation to CO increases the degree of lower frequency shifts of CO on the electrodes in the order Pt electrodes < monolayer Ag/Pt < multilayer Ag/Pt.     

电化学去合金化Pt(Pd)-Cu对氧的电催化还原活性的研究

应用电化学去合金法制备了表面覆盖有Pt(Pd)原子层的Pt(Pd)-Cu合金催化剂.研究该催化剂在0.1mol.L-1HClO4酸性溶液中对氧气电化学还原的催化活性,并采用同步辐射反常X-射线衍射法(Anomalous X-ray Diffraction,AXRD)和表面X-射线散射法(Surface X-ray Scattering,SXS)从原子尺度研究了去合金化后催化剂的结构.分析对比纳米颗粒、薄膜和单晶3种不同形式的去合金化Pt-Cu的结构和催化活性以及Pt-Cu和Pd-Cu两种不同合金薄膜的结构和催化活性.结果表明,表面应力是影响催化剂催化活性的关键因素,而应力大小则与去合金化后所形成的表面Pt(Pd)层的厚度相关,材料尺寸和组成元素等都影响表面Pt(Pd)层的厚度.提出可利用调控材料表面的应力来设计高催化活性的催化剂.