Matrix matching in liquid chromatography–mass spectrometry with stable isotope labelled internal standards-Is it necessary?

Matrix matching is used in analysis to compensate for matrix effects that influence analytical response. It has been a widely discussed topic in electro-spray mass spectrometry where the ionization suppression is a major problem in accurate quantitative analysis. However, the unique strength of mass spectrometry to detect and quantify accurately a co-eluting stable isotope labelled internal standard offers an easy solution to the ionization suppression problem. Given the fact that it is impossible to match the matrix of the calibration standards with all samples, mass spectrometry allows accurate quantitation without the need for matrix matching, as long as the internal standard co-elutes with the analyte of interest. If the analyte and internal standard co-elute, the slope of the calibration curve analyte response/internal standard vs. analyte concentration is independent of the matrix composition, eliminating the need for matrix matching.     

Ionic matrix for matrix-enhanced surface-assisted laser desorption ionization mass spectrometry imaging (ME-SALDI-MSI)

Matrix-enhanced surface-assisted laser desorption ionization mass spectrometry imaging (ME-SALDI MSI) has been previously demonstrated as a viable approach to improving MS imaging sensitivity. We describe here the employment of ionic matrices to replace conventional MALDI matrices as the coating layer with the aims of reducing analyte redistribution during sample preparation and improving matrix vacuum stability during imaging. In this study, CHCA/ANI (α-cyano-4-hydroxycinnamic acid/aniline) was deposited atop tissue samples through sublimation to eliminate redistribution of analytes of interest on the tissue surface. The resulting film was visually homogeneous under an optical microscope. Excellent vacuum stability of the ionic matrix was quantitatively compared with the conventional matrix. The subsequently improved ionization efficiency of the analytes over traditional MALDI was demonstrated. The benefits of using the ionic matrix in MS imaging were apparent in the analysis of garlic tissue sections in the ME-SALDI MSI mode.     

Molecular Imaging of Biological Samples on Nanophotonic Laser Desorption Ionization Platforms

Mass spectrometry imaging (MSI) is a comprehensive tool for the analysis of a wide range of biomolecules. The mainstream method for molecular MSI is matrix‐assisted laser desorption ionization, however, the presence of a matrix results in spectral interferences and the suppression of some analyte ions. Herein we demonstrate a new matrix‐free MSI technique using nanophotonic ionization based on laser desorption ionization (LDI) from a highly uniform silicon nanopost array (NAPA). In mouse brain and kidney tissue sections, the distributions of over 80 putatively annotated molecular species are determined with 40 μm spatial resolution. Furthermore, NAPA‐LDI‐MS is used to selectively analyze metabolites and lipids from sparsely distributed algal cells and the lamellipodia of human hepatocytes. Our results open the door for matrix‐free MSI of tissue sections and small cell populations by nanophotonic ionization.     

Impact of APCI ionization source in liquid chromatography tandem mass spectrometry based tissue distribution studies

Measurement of test article concentration in tissue samples has been an important part of pharmacokinetic study and has helped to co‐relate pharmacokinetic/pharmacodynamic relationships since the 1950s. Bioanalysis of tissue samples using LC–MS/MS comes with unique challenges in terms of sample handling and inconsistent analyte response owing to nonvolatile matrix components. Matrix effect is a phenomenon where the target analyte response is either suppressed or enhanced in the presence of matrix components. Based on previous reports electrospray ionization (ESI) mode of ionization is believed to be more affected by matrix components than atmospheric pressure chemical ionization (APCI) or atmospheric pressure photoionization. To explore the impact of ionization source with respect to bioanalysis of tissue samples, five structurally diverse compounds – atenolol, verapamil, diclofenac, propranolol and flufenamic acid – were selected. Quality control standards were spiked into 10 different biological matrices like whole blood, liver, heart, brain, spleen, kidney, skeletal muscle, eye and skin tissue and were quantified against calibration standards prepared in rat plasma. Quantitative bioanalysis was performed utilizing both APCI and ESI mode and results were compared. Quality control standards when analyzed with APCI mode were found to be more consistent in terms of accuracy and precision as compared with ESI mode. Additionally, for some instances, up to 20‐fold broader dynamic linearity range was observed with APCI mode as compared with ESI mode. As phospholid interferences have poor response in APCI mode, protein precipitation extraction technique can be used for multimatrix quantitation, which is more amenable to automation. The approach of multiple biological matrix quantitation against a single calibration curve helps bioanalysts to reduce turnaround time. Copyright © 2016 John Wiley & Sons, Ltd.     

Matrix-free mass spectrometric imaging using laser desorption ionisation Fourier transform ion cyclotron resonance mass spectrometry

Mass spectrometry imaging (MSI) is a powerful tool in metabolomics and proteomics for the spatial localization and identification of pharmaceuticals, metabolites, lipids, peptides and proteins in biological tissues. However, sample preparation remains a crucial variable in obtaining the most accurate distributions. Common washing steps used to remove salts, and solvent-based matrix application, allow analyte spreading to occur. Solvent-free matrix applications can reduce this risk, but increase the possibility of ionisation bias due to matrix adhesion to tissue sections. We report here the use of matrix-free MSI using laser desorption ionisation performed on a 12 T Fourier transform ion cyclotron resonance (FTICR) mass spectrometer. We used unprocessed tissue with no post-processing following thaw-mounting on matrix-assisted laser desorption ionisation (MALDI) indium-tin oxide (ITO) target plates. The identification and distribution of a range of phospholipids in mouse brain and kidney sections are presented and compared with previously published MALDI time-of-flight (TOF) MSI distributions.     

Immersion by rotation‐based application of the matrix for fast and reproducible sample preparations and robust results in mass spectrometry imaging

Automated matrix deposition for matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry imaging (MSI) is crucial for producing reproducible analyte ion signals. Here we report an innovative method employing an automated immersion apparatus, which enables a robust matrix deposition within 5 minutes and with scalable throughput by using MAPS matrix and non‐polar solvents. MSI results received from mouse heart and rat brain tissues were qualitatively similar to those from nozzle sprayed samples with respect to peak number and quality of the ion images. Overall, the immersion‐method enables a fast and careful matrix deposition and has the future potential for implementation in clinical tissue diagnostics.     

Contributions to accuracy improvement of simultaneous ICP atomic emission spectrometry using multi-line measurements of analyte and internal standard elements Applications for the analysis of permalloy

For successful application of simultaneous ICP atomic emission spectrometry for major component determinations in multi-component materials the accuracy of the method has to be improved. As a contribution to solve this problem a combined procedure for multi-component standard sample preparation, optimum calibration and different variations of internal standard corrections is described. Variance-weighted multi-line calibrations give most accurate results. Internal standard corrections are effective, if the time-dependent spectral line intensity fluctuations of the standard and the analyte elements are well correlated. Their sensitivities against some responsible device parameter variations are investigated. On the basis of multi-line measurements of the analyte and internal standard elements a “group-selected internal standard correction” (GS-ISC) method is applied and results in relative errors of less than 1% even for extreme fluctuations of the raw intensities. For rapid routine determination methods of materials with variable element compositions the added line intensities of the internal standard element can be used to correct the added analyte line raw intensities (“intensity addition internal standard correction” (IA-ISC) method). These accuracy optimization procedures are applied for the analysis of the soft magnetic material permalloy using the internal standard element In.     

The cationization of synthetic polymers in matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry: Investigations of the salt‐to‐analyte ratio

Matrix‐assisted laser desorption/ionization (MALDI) is a soft ionization technique that when used to analyze synthetic polymer analytes often requires the addition of a metal cationization agent (herein termed the “salt”). The choice of both the matrix and the cationization agent needs to be taken into account when considering the polymer under study; different polymers have shown different affinities toward different cationization agents, and their selectivity can change as the matrix changes. Salt‐to‐analyte ratio (S/A) plots are used in this work to investigate the effect of the quantity of cationization agent employed in the analysis of a poly (methylmethacrylate) (PMMA) analyte with different MALDI matrices. The point at which analyte signal stops increasing with the added cationization agent is termed the “cation saturation point,” and it was found to occur around a S/A of 1. When the analyte signal after this point remains constant, it is termed an “ideal case.” The “non‐ideal case” occurs when the analyte signal decreases after the cation saturation point. The amount of matrix present (measured as the matrix‐to‐analyte molar ratio, M/A) and the use of different counterions for the salt are also found to affect the intensity of the analyte signal. In non‐ideal cases, changes in the counterion or an increase in the M/A are found to increase the analyte signal, often converting an initially observed non‐ideal case into an ideal case. Several experiments attempting to uncover the reason for observation of the non‐ideal S/A behavior are also described.     

Solid-phase microextraction and gas chromatography-mass spectrometry for the determination of polycyclic aromatic hydrocarbons in environmental solid matrices

A solid-phase microextraction (SPME) and gas chromatography-mass spectrometry method for determining polycyclic aromatic hydrocarbons (PAHs) in environmental solid matrices is developed. Investigated matrices include seaweed (Undaria pinnatifida and Himanthalia elongata), humic substances (isolated from a wetland out-flow and purchased from Aldrich), and soil. Optimal conditions for a good SPME efficiency of 16 hydrocarbon compounds are obtained using a 100- micro m polydimethylsiloxane fiber directly immersed in aqueous carrier medium. The method is remarkable for presenting short extraction times and considerably high sensitivities. The SPME results obtained by using internal calibration give the total analyte concentration based on the identical partitioning behavior of native and spiked pollutants. The detection limits range from 0.001 to 0.1 mg of PAH per kilogram of dry matrix. SPME external calibration provides information regarding freely dissolved analytes. The detection limits range from 0.001 to 0.05 micro g of PAH per liter of carrier medium. The SPME with external calibration procedure can be applied to measure free concentrations of a target compound spiked into a carrier medium and onto a matrix. Based on a comparison of results obtained for the two samples, the partitioning of the target analyte between the matrix and the carrier medium is calculated.     

Novel Studies about the Electrooxidation of a Deoxynivalenol (DON) Mycotoxin Reduction Product Adsorbed on Glassy Carbon and Carbon Paste Electrodes

A novel and fast square‐wave adsorptive anodic stripping voltammetric procedure on glassy carbon and carbon paste electrodes is described for the indirect trace quantitation of deoxynivalenol (DON) mycotoxin that frequently contaminates soya and foodstuff. The in situ homogeneous reduction of the toxin by product/s of dissolved oxygen electroreduction in pH 8 buffer solution makes the quantitation of DON possible through a simple electroanalytical technique. Moreover, its potential use for the analysis of real samples was demonstrated using a soya flour sample spiked with DON without previous separating procedures. The DON detection limits were 3.6 and about 6 ppb from standard solutions and soya flour matrix, respectively.     

A solvent‐free matrix application method for matrix‐assisted laser desorption/ionization imaging of small molecules

Matrix application continues to be a critical step in sample preparation for matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry imaging (MSI). Imaging of small molecules such as drugs and metabolites is particularly problematic because the commonly used washing steps to remove salts are usually omitted as they may also remove the analyte, and analyte spreading is more likely with conventional wet matrix application methods. We have developed a method which uses the application of matrix as a dry, finely divided powder, here referred to as dry matrix application, for the imaging of drug compounds. This appears to offer a complementary method to wet matrix application for the MALDI‐MSI of small molecules, with the alternative matrix application techniques producing different ion profiles, and allows the visualization of compounds not observed using wet matrix application methods. We demonstrate its value in imaging clozapine from rat kidney and 4‐bromophenyl‐1,4‐diazabicyclo(3.2.2)nonane‐4‐carboxylic acid from rat brain. In addition, exposure of the dry matrix coated sample to a saturated moist atmosphere appears to enhance the visualization of a different set of molecules. Copyright © 2010 John Wiley & Sons, Ltd.     

Analysis of erlotinib and its metabolites in rat tissue sections by MALDI quadrupole time-of-flight mass spectrometry

A qualitative and quantitative analysis of erlotinib (RO0508231) and its metabolites was carried out on rat tissue sections from liver, spleen and muscle. Following oral administration at a dose of 5 mg/kg, samples were analyzed by matrix-assisted laser desorption ionization (MALDI) with mass spectrometry (MS) using an orthogonal quadrupole time-of-flight instrument. The parent compound was detected in all tissues analyzed. The metabolites following drug O-dealkylation could also be detected in liver sections. Sinapinic acid (SA) matrix combined with the dried-droplet method resulted in better conditions for our analysis on tissues. Drug quantitation was investigated by the standard addition method and liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis on the tissue extracts. The presence of the parent compound and of its O-demethylated metabolites was confirmed in all tissue types and their absolute amounts calculated. In liver the intact drug was found to be 3.76 ng/mg tissue, while in spleen and muscle 6- and 30-fold lower values, respectively, were estimated. These results were compared with drug quantitation obtained by whole-body autoradiography, which was found to be similar. The potential for direct quantitation on tissue sections in the presence of an internal standard was also investigated using MALDI-MS. The use of alpha-cyano-4-hydroxycinnamic acid (CHCA) as the matrix resulted in better linearity for the calibration curves obtained with reference solutions of the drug when compared to SA, but on tissue samples no reliable quantitative analysis was possible owing to the large variability in the signal response. MS imaging experiments using MALDI in MS/MS mode allowed visualizing the distribution of the parent compound in liver and spleen tissues. By calculating the ratio between the total ion intensities of MS images for liver and spleen sections, a value of 6 : 1 was found, which is in good agreement with the quantitative data obtained by LC-MS/MS analysis.     

A technique for relative quantitation of cancer biomarkers in formalin‐fixed,paraffin‐embedded (FFPE) tissue using stable‐isotope‐label based mass spectrometry imaging (SILMSI)

We developed a novel technique for the relative quantitation of pairs of cancer biomarkers in formalin‐fixed paraffin‐embedded (FFPE) tissue. The method utilizes stable isotope labeled (SIL) chromogens deposited during the standard immunohistochemistry (IHC) tissue staining process. The labeled chromogens are precipitated on tissue enzymatically using the standard IHC protocols. The tissue is then imaged with matrix‐free laser desorption ionization time‐of‐flight mass spectrometry, and peak intensities of reporter ions are used to estimate the relative quantitation of protein biomarkers across the tissue. The relative abundance of two breast cancer biomarkers, estrogen receptor (ER) and progesterone receptor (PgR), were quantitated using their ratio of expression in xenograft models, and the ratios were found to be reproducible both within and across serial sections. The relative quantification of multiple biomarkers in situ across a single tissue section adds an additional dimension in cancer histological evaluation by allowing a visual and statistical assessment of tumor heterogeneity. Copyright © 2015 John Wiley & Sons, Ltd.     

LC-MS/MS quantitative analysis of reducing carbohydrates in soil solutions extracted from crop rhizospheres

A simple, sensitive, and specific analytical method has been developed for the quantitative determination of 15 reducing carbohydrates in the soil solution of crop rhizosphere. Reducing carbohydrates were derivatized with 1-phenyl-3-methyl-5-pyrazolone, separated by reversed-phase high-performance liquid chromatography and detected by electrospray ionization tandem mass spectrometry. Lower limits of quantitation of 2 ng/mL were achieved for all carbohydrates. Quantitation was performed using peak area ratios (analyte/internal standard) and a calibration curve spiked in water with glucose-d₂ as the internal standard. Calibration curves showed excellent linearity over the range 2–100 ng/mL (10–1,000 ng/mL for glucose). The method has been tested with quality control samples spiked in water and soil solution samples obtained from the rhizosphere of wheat and canola and has been found to provide accurate and precise results.     

Development,validation and comparison of four methods for quantifying endogenous 25OH‐D3 in human plasma

To meet the increasing clinical needs for 25‐hydroxyvitamin D3 (25OH‐D3) detection, the development of an efficient and accurate high‐performance liquid chromatography–mass spectrometry (HPLC–MS) method for plasma 25OH‐D3 quantitation is important. Since 25OH‐D3 is an endogenous compound, the lack of a plasma blank increases the difficulty of accurately quantifying 25OH‐D3. Selection of a method suitable for clinical monitoring among various methods for endogenous compound quantification is necessary. Methyl tert butyl ether was chosen for the sample treatment in a liquid–liquid extraction protocol. Water as a blank matrix, 5% human serum albumin in water as a blank matrix, surrogate analyte and background subtraction were designed to address the problem of a deficiency of a plasma blank. Four liquid chromatography–tandem mass spectrometry methods were fully validated to verify the advantages and limitations owing to regulatory deficiencies for endogenous compound validation. All four methods met the criteria and could be used to monitor clinical samples. Overall 30 human plasma samples were quantified in parallel using the four methods. The difference between any two methods was <12.6% and the total relative standard deviation was <5.2%. Background subtraction and 5% human serum albumin in water as a blank matrix may be better choices considering data quality, matrix similarity, cost and practicality.     

A membrane separation technique for optimizing sample preparation of MALDI-TOF MS detection

Here, we report a new method based on the combination of membrane separation technology and nanomaterial to rapid detection of peptides and protein with MALDI-TOF MS. This method shows advantages as it can inhibit the heterogeneous of sample spot and enhance the target molecular signal intensity.     

The detection of various opiates and benzodiazepines by comprehensive two‐dimensional gas chromatography/time‐of‐flight mass spectrometry

A technique using comprehensive two‐dimensional gas chromatography/time‐of‐flight mass spectrometry (GC × GC/TOFMS) is applied to qualitative and quantitative drug testing. Human serum was ‘spiked’ with known quantities of benzodiazepines and a ‘street heroin’ mixture including some of the major metabolites and impurities. The sample components were extracted from the matrix by solid‐phase extraction (SPE). Constituents containing polar hydroxyl and/or secondary amine groups were derivatised with N‐methyl‐N‐(tert‐butyldimethyl)trifluoroacetamide (MTBSTFA) to improve the chromatographic performance. An orthogonal separation of the matrix constituents was achieved by coupling a DB‐5ms (5% phenyl) to a BPX50 (50% phenyl) GC column. The eluant was focused onto the second column by a twin‐stage cryo‐modulator. Rapid 6 s modulation times were achieved by transfer from a 30 m × 0.25 mm (length × internal diameter) to a 2 m × 0.1 mm column. TOFMS with rapid spectral acquisition (≤500 spectra/s) was employed in the mass range m/z 40–650. A clean mass spectrum was obtained for each analyte using mass spectral deconvolution software. The sensitivity and repeatability of the method were evaluated by the preparation of calibration standards for two benzodiazepines, flunitrazepam and its major metabolite 7‐aminoflunitrazepam (7‐amino‐FN), in the concentration range 5–1000 ng/mL. The limits of detection (LODs) and limits of quantitation (LOQs), calculated by repeat injections (×10) of the lowest standard, were 1.6 and 5.4 ng/mL (flunitrazepam); 2.5 and 8.5 ng/mL (7‐amino‐FN), respectively. There is scope to extend this protocol to screen a large number of drugs and metabolites stored in a library database. Copyright © 2009 John Wiley & Sons, Ltd.     

Evaluation of matrix effect in one‐dimensional and comprehensive two‐dimensional liquid chromatography for the determination of the phenolic fraction in extra virgin olive oils

Olea europaea, meaning “European olive,” is a small tree belonging to the family Oleaceae, occurring in the Mediterranean Basin. Olive oil is an essential component of a balanced diet because of its nutritional value. Among micronutrients, phenolic compounds did show important beneficial effects for human health. The majority of the research studies on the phenol content are carried out by liquid chromatography combined to photodiode array and/or mass spectrometry detection; however, because of matrix complexity, one‐dimensional liquid chromatography cannot be sometimes sufficient to obtain rewarding separations, requiring more advanced analytical techniques. In this work, comprehensive two‐dimensional liquid chromatography, incorporating RP‐Amide and C18 stationary phases, in the first and second dimension, respectively, both under reversed phase conditions, was investigated for the determination of the phenolic fraction in extra virgin olive oil samples. As far as detection is concerned, triple quadrupole mass spectrometry was employed under multi reaction monitoring mode offering superior selectivity and sensitivity. The reduction of matrix effects, when using comprehensive two‐dimensional liquid chromatography with respect to conventional one‐dimensional liquid chromatography, was assessed by comparing the slopes of calibration curves built from standard solutions and spiked olive oil samples.     

敞开式质谱成像方法的组织样品稳定性研究

以添加镇静催眠候选新药N6-羟苄腺嘌呤核苷[N6-(4-hydroxybenzyl)adenine riboside,NHBA]的组织匀浆切片作为考察对象,对空气动力辅助离子化质谱成像系统(Air Flow Assisted Ionization Mass Spectrometry Imaging,AFAI-MSI)的关键参数进行考察与优化,以保证最佳条件进行样品检测。在此基础上,对预处理的整体大鼠组织切片进行平行的连续两次质谱成像分析,考察了其内源性代谢物在成像分析过程中是否发生变化。通过对采集数据中关键质谱峰的筛选等处理步骤,并采用可视化的主成分分析(PCA)方法,开展了组织样品内源性代谢物的稳定性分析,最终验证了采用该样品前处理和质谱成像方法,能够保证组织切片样品中内源性代谢物的稳定性,为质谱成像分析结果提供了可靠依据。     

Using calibration approaches to compensate for remaining matrix effects in quantitative liquid chromatography/electrospray ionization multistage mass spectrometric analysis of phytoestrogens in aqueous environmental samples

Signal suppression is a common problem in quantitative liquid chromatography/electrospray ionization multistage mass spectrometric (LC/ESI-MS(n)) analysis in environment samples, especially in highly loaded wastewater samples with highly complex matrix. Optimization of sample preparation and improvement of chromatographic separation are prerequisite to improve reproducibility and selectivity. Matrix components are reduced if not eliminated by optimization of sample preparation steps. However, extensive sample preparation may be time-consuming and risk the significant loss of some trace analytes. The best way to further compensate matrix effects is the use of an internal standard for each analyte. However, in a multi-component analysis, finding appropriate internal standards for every analyte is often difficult. In this present study, a more practical alternative option was sought. Matrix effects were assessed using the post-extraction addition method. By comparison of three different calibration approaches, it was found that matrix-matched calibration combined with one internal standard provides a satisfactory method for compensating for any residual matrix effects on all the analytes. Validating experiments on different sewage treatment plant (STP) influent samples analyzing for a range of phytoestrogens showed that this calibration method provided satisfactory results with concentration ratio 96.1-105.7% compared to those by standard addition.