聚合物/层状硅酸盐插层纳米复合材料的研究

简述了聚合物 /层状硅酸盐插层纳米复合材料方面的研究进展。阐述了层状硅酸盐的结构与性质以及纳米复合材料形成过程的热力学原理。重点介绍了尼龙、聚丙烯等聚合物的层状硅酸盐插层纳米复合材料的现状和技术发展趋势     

原位聚合法制备聚丙烯酸甲酯/ZnAl层状双氢氧化物插层纳米复合材料及其形貌特征

近 2 0年来 ,聚合物 /层状无机物纳米复合材料引起了广泛关注 ,与聚合物材料相比 ,该类纳米复合材料在力学、热稳定性、阻燃、气体阻隔等性能方面都有显著增强 .但所报道的绝大部分无机物均采用蒙脱土为代表的层状硅酸盐[1～ 3] ,而以层状双氢氧化物 (Layered double hydroxide,LDH)为基础制备的聚合物 /层状无机物纳米复合材料的报道极少 .LDH是由水镁石结构中的二价阳离子 (M2 + )被三价阳离子 (M3+ )取代而形成的 ,层上产生的剩余正电荷被吸附在层间的阴离子平衡 .与层状硅酸盐相比 ,L DH层间电荷密度高 ,层与层之间相互作用强 ,导…     

可降解聚合物/层状硅酸盐纳米复合材料的研究进展

作为一类性能优良的环保功能材料，生物降解性聚合物/层状硅酸盐（BPLS）纳米复合材料正日益引起人们的关注。本文综述了BPLS纳米复合材料的制备途径、结构表征方法及其性能特点，同时对其应用前景作了展望。     

聚合物／层状硅酸盐纳米复合材料研究进展

聚合物／层状硅酸盐（ＰＬＳ）纳米复合材料是近１０年迅速发展起来的研究交叉科学。由于聚合物纳米复合材料具有常规聚合物复合材料所没有的结构、形态以及较常规聚合物复合材料更优异的物理力学性能、耐热性和气体液体阻隔性能等,因而显示出重要的科学意义和应用前景。本文综述了聚合物／层状硅酸盐纳米复合材料的制备,结构表征和物理力学性能,对制务过程进行了热力学和动力学分析,最后对其应用前景进行了展望。     

壳聚糖基层状硅酸盐纳米复合材料

壳聚糖基层状硅酸盐纳米复合材料是采用简单的溶液插层法,将壳聚糖及其衍生物插层进入层状硅酸盐的纳米层间而获得的有机无机纳米杂化材料。该材料偶合了壳聚糖及其衍生物和层状硅酸盐的协同优势,为壳聚糖的研发应用开辟了新方向和新途径。本文在对壳聚糖和层状硅酸盐的特性及应用进行简单介绍的基础上,重点综述了壳聚糖基层状硅酸盐纳米复合材料的制备方法、插层机理及应用现状,并提出了目前存在的主要问题。     

新型纳米层状硅酸盐Magadiite主体材料的制备、表征、结构和生成机理研究

利用简单的插层反应方法成功地制备了四丁基氢氧化铵(TBAOH)插层的层状硅酸盐Magadiite纳米复合材料,在室温下该材料溶胶放置30d可以保持稳定,粉体长期保存结构稳定,而且反应时间短,只需30min.利用XRD,FTIR,SEM和HRTEM等方法对样品进行了结构表征.结果表明,TBA⁺离子在层间以双分子层排列,并与层状硅酸盐结合在一起,TBAOH插层后的纳米粒子在玻璃片上进行了重组,粒径分布在10～100nm之间;HRTEM电镜照片进一步证实了剥离的层状硅酸盐纳米粒子在玻璃片上的自组装过程.根据实验结果阐述了TBAOH插层反应形成纳米溶胶的机理.     

聚丙烯/层状硅酸盐纳米复合材料的制备、结构和性能

聚丙烯／层状硅酸盐纳米复合材料可通过丙烯单体插层聚合、聚丙烯溶液插层和聚丙烯熔融插层等方法制备，得到插层型或剥离型纳米复合材料，形成了与传统填充型聚合物复合材料不同的微观结构，其机械性能，热性能，阻隔性能和流变性能等明显提高，由于聚丙烯的非极性及层状硅酸盐纳米复合材料制备方法的特殊性，该研究具有一定的理论价值。     

聚合物/层状硅酸盐纳米复合材料的环境稳定性

过去的十多年里，聚合物／层状硅酸盐纳米复合材料在制备、结构与性能方面的研究取得了长足的进步。一些聚合物基的纳米复合材料已实现工业生产，在汽车、家电和包装等领域得到应用。环境稳定性是聚合物材料应用的一个重要方面。本文从材料的耐候性、耐热性和阻燃性能的角度出发，评述了近年来聚合物／层状硅酸盐纳米复合材料在紫外光降解、热降解和燃烧性能方面的研究进展，以期对纳米复合材料的基础研究及应用开发有所裨益。     

茂钛催化剂苯乙烯原位间规聚合制备sPS/蒙脱土纳米复合材料

聚合物基纳米复合材料具有常规有机 /无机复合材料所没有的结构和形态 ,其性能较普通的聚合物复合材料更优异 ,因而引起人们的广泛关注 [1～ 4 ] .近年来的研究表明 ,运用插层聚合和熔融插层等方法可使某些具有层状结构的硅酸盐与聚合物产生特殊的界面作用 ,并以纳米尺寸均匀分     

剥离型硅橡胶/黏土纳米复合材料研究

利用层状硅酸盐制备有机 无机纳米复合材料是当前人们研究的热点[1,2 ] ,这类材料具有较常规聚合物 无机填料复合材料无法比拟的优点 ,可以明显改善高分子材料的物理机械性能、热稳定性、气体阻隔性、阻燃性、导电性、光学性等 .一般来说 ,聚合物 层状硅酸盐 (Ｐｏｌｙｍｅｒｌａｙｅｒｅｄｓｉｌｉｃａｔｅ ,ＰＬＳ)纳米复合材料可分为插层型和剥离型两种类型 .插层型纳米复合材料即聚合物插入到硅酸盐层中 ,硅酸盐在近程仍保持原有的有序晶体结构 ,在远程则是无序的 .对弹性体而言 ,硅酸盐含量在插层型杂化材料中的含量比较高 ,力学性能…     

A new synthetic layered silicate of type metal silicate hydrate

A new layered silicate has been synthesized in the quaternary system Na₂O–SiO₂–H₂O-polymeric organic cation. The polymeric organic cation was intercalated into the silicate during crystallization. Composition, structure, and x-ray diffraction pattern of the new silicate do not fit with any known layered silicate [1–5]. Many similarities were found to hydrous alkali silicates (metal silicate hydrates, M-SH-type).The new silicate differs from M-SH by a high structural stability, against a wide range of different energetic influences. Due to the relatively high stability, high-resolution electron microscopy (HREM) can be applied to study the layer structure of this silicate as a representative of the M-SH silicates. All known M-SH, for example, magadiite and kenyaite are decomposed by the electronic beam.     

Synthetic Layered Silicate as a Carrier for Liquid Ingredients for the Rubber- and Tire Industry

We propose the use of novel materials based on synthetic calcium silicate hydrate (C S H) for the rubber- and tire industry. We found that the synthetic silicate belongs to the family of layered calcium silicate hydrates. Due to its layered structure and inert surface it easily adsorbs liquid components of rubber compounds, such as bis(triethoxysilylpropyl) tetrasulfide (TESPT) and liquid polysulfide (LP). Then, in processing, the C S H can smoothly release these components. The water, trapped in the material's gallery layers, plays the role of a catalyst in the silane coupling on silica's surface. In addition, we used this silicate as a component in promoter systems in order to improve adhesion stability between a brass-coated steel cord and rubber. The application of the calcium silicate hydrate as an inert substrate for the promoter system allowed the development of materials that have comparable adhesion strength with most commercial promoters.     

TPEV/Layered Silicate Nanocomposites with Dynamic Vulcanizing Process

Thermoplastic Elastomer Vulcanizates (TPEV) prepared by dynamic vulcanizing process, is a material which has both the properties of a vulcanized rubber (elasticity) and thermoplastics (processibility). TPEV is cost effective for its good processibility and eco-friendly for its recyclability. TPEV/layered silicate nanocomposites can give a greater advantage of weight reduction which is a key issue in automotive industry because of fuel efficiency. Applying TPEV/layered silicate nanocomposites, the amount of reinforcement mineral filler can be reduced greatly compared to general TPEV which is reinforced by talc or kaolin clay. The mechanical strengths of TPEV/layered silicate nanocomposites using small amounts of MMT is similar to those of general TPEV using larger amounts of general filler. Various evaluations such as degree of crosslinking, degree of filler dispersion (XRD and TEM), surface hardness and tensile properties were carried out for the TPEV/layered silicate nanocomposites.     

Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.     

Swelling, functionalization, and structural changes of the nanoporous layered silicates AMH-3 and MCM-22

Nanoporous layered silicate materials contain 2D-planar sheets of nanoscopic thickness and ordered porous structure. In comparison to porous 3D-framework materials such as zeolites, they have advantages such as significantly increased surface area and decreased diffusion limitations because the layers can potentially be exfoliated or intercalated into polymers to form nanocomposite materials. These properties are particularly interesting for applications as materials for enhancing molecular selectivity and throughput in composite membranes. In this report, the swelling and surface modification chemistry of two attractive nanoporous layered silicate materials, AMH-3 and MCM-22, were studied. We first describe a method, using long-chain diamines instead of monoamines, for swelling of AMH-3 while preserving its pore structure to a greater extent during the swelling process. Then, we describe a stepwise functionalization method for functionalizing the layer surfaces of AMH-3 and MCM-22 via silane condensation reactions. The covalently attached hydrocarbon chain molecules increased the hydrophobicity of AMH-3 and MCM-22 layer surfaces and therefore allow the possibility of effectively dispersing these materials in polymer matrices for thin film/membrane applications.     

Synthesis and crystal structure of a layered silicate HUS-1 with a halved sodalite-cage topology

A new layered silicate, HUS-1, was synthesized by hydrothermal synthesis using decomposed FAU- and *BEA-type zeolites as nanosized silica parts. Structural analyses by X-ray powder diffractometry and solid-state magic-angle-spinning (MAS) NMR spectroscopy revealed that HUS-1 has a layered structure containing a silicate layer per unit cell along a stacking direction. Its framework topology is similar to that of SOD-type zeolites and consists of a halved sodalite cage, which includes four- and six-membered Si rings. Structure refinement by the Rietveld method showed that tetramethylammonium (TMA) ions used as a structure-directing agent (SDA) were incorporated into the interlayer. The four methyl groups of the TMA molecule were located orderly in a hemispherical cage in the silicate layer, which suggests restraint of molecular motion. The interlayer distance is estimated at about 0.15 nm, which is unusually short in comparison with that in other layered silicates (e.g., β-HLS or RUB-15) with similar framework topologies. The presence of hydrogen bonding between adjacent terminal O atoms was clearly revealed by the (1)H MAS NMR spectroscopy and by electron-density distribution obtained by the maximum entropy method.     

Biodegradable polyester nanocomposites: The effect of structure on mechanical and degradation behavior

The study describes the effect of the layered silicate content and its dispersion on the mechanical behavior of poly(ε-caprolactone) (PCL) nanocomposites and their corresponding changes during the degradation in a phosphate buffer at 37 °C. Two nanocomposite systems were compared: intercalated and exfoliated nanocomposites. They were prepared by melt-compounding of a high-molecular-weight PCL with in situ polymerized silicate masterbatches or an organophilized montmorillonite. It has been shown that Young modulus increases with the increasing silicate content and at the same time, the highest increase in the modulus is observed for the exfoliated system. The stiffness enhancement is predominantly caused by the dispersed inorganic phase but also supported by the contribution of the low-molecular-weight PCL fraction, which comes from the masterbatch, to the total degree of crystallinity. In contrast, the increase in the yield stress is driven mainly by the present low-molecular-weight PCL fraction with higher crystallinity. The degradation behavior reflects both the presence of the layered silicate as well as the low-molecular-weight PCL fraction. Their presence accelerates the degradation in the phosphate buffer at 37 °C.     

Biodegradable Polylactide and Its Nanocomposites: Opening a New Dimension for Plastics and Composites

The academic and industrial aspects of the preparation, characterization, mechanical and materials properties, crystallization behavior, melt rheology, and foam processing of pure polylactide (PLA) and PLA/layered silicate nanocomposites are described in this feature article. Recently, these materials have attracted considerable interest in polymer science research. PLA is linear aliphatic thermoplastic polyester and is made from agricultural products. Hectorite and montmorillonite are among the most commonly used smectite‐type layered silicates for the preparation of nanocomposites. Smectites are a valuable mineral class for industrial applications because of their high cation exchange capacities, surface area, surface reactivity, adsorptive properties, and, in the case of hectorite, high viscosity, and transparency in solution. In their pristine form, they are hydrophilic in nature, and this property makes them very difficult to disperse into a polymer matrix. The most common way to overcome this difficulty is to replace interlayer cations with quaternized ammonium or phosphonium cations, preferably with long alkyl chains. In general, polymer/layered silicate nanocomposites are of three different types: (1) intercalated nanocomposites, in which insertion of polymer chains into the layered silicate structure occurs in a crystallographically regular fashion, regardless of polymer to layered silicate ratio, with a repeat distance of few nanometer; (2) flocculated nanocomposites, in which intercalated and stacked silicate layers are sometimes flocculated due to the hydroxylated edge–edge interactions between the silicate layers; (3) exfoliated nanocomposites, in which individual silicate layers are uniformly distributed in the polymer matrix by average distances that totally depend on the layered silicate loading. This new family of composite materials frequently exhibits remarkable improvements in its material properties when compared with those of virgin PLA. Improved properties can include a high storage modulus both in the solid and melt states, increased flexural properties, a decrease in gas permeability, increased heat distortion temperature, an increase in the rate of biodegradability of pure PLA, and so forth.

Illustration of the biodegradability of PLA and various nanocomposites.     

Synthesis of polystyrene/polybutylacrylate/layered silicate nanocomposites in aqueous medium

Synthesis of nanocomposites based on polystyrene/polybutylacrylate with layered silicates using emulsion polymerization procedure in aqueous medium allowed obtaining stable nanolatexes with sodium dodecyl sulfate as surfactant. Monomer and layered silicate nature influences the average diameter of the particles and the zeta potential appeared on the particle-disperse medium interface, as it was shown by dynamic light scattering analyses. In order to evidence the layered silicate structure, two structural evaluation methods were used. A new approach was used based on Fourier transform infrared analyses as a method to asses the clay delamination. The method was followed in conjunction with X-ray diffraction patterns and showed the pronounced delamination of the clay in the polymer matrix. The thermal stability was investigated by thermogravimetric analyses and the morphologies in solid state observed by environmental scanning electron microscope measurements.