聚合物/层状硅酸盐插层纳米复合材料的研究

简述了聚合物 /层状硅酸盐插层纳米复合材料方面的研究进展。阐述了层状硅酸盐的结构与性质以及纳米复合材料形成过程的热力学原理。重点介绍了尼龙、聚丙烯等聚合物的层状硅酸盐插层纳米复合材料的现状和技术发展趋势     

壳聚糖基层状硅酸盐纳米复合材料

壳聚糖基层状硅酸盐纳米复合材料是采用简单的溶液插层法,将壳聚糖及其衍生物插层进入层状硅酸盐的纳米层间而获得的有机无机纳米杂化材料。该材料偶合了壳聚糖及其衍生物和层状硅酸盐的协同优势,为壳聚糖的研发应用开辟了新方向和新途径。本文在对壳聚糖和层状硅酸盐的特性及应用进行简单介绍的基础上,重点综述了壳聚糖基层状硅酸盐纳米复合材料的制备方法、插层机理及应用现状,并提出了目前存在的主要问题。     

茂钛催化剂苯乙烯原位间规聚合制备sPS/蒙脱土纳米复合材料

聚合物基纳米复合材料具有常规有机 /无机复合材料所没有的结构和形态 ,其性能较普通的聚合物复合材料更优异 ,因而引起人们的广泛关注 [1～ 4 ] .近年来的研究表明 ,运用插层聚合和熔融插层等方法可使某些具有层状结构的硅酸盐与聚合物产生特殊的界面作用 ,并以纳米尺寸均匀分     

聚丙烯/层状硅酸盐纳米复合材料的制备、结构和性能

聚丙烯／层状硅酸盐纳米复合材料可通过丙烯单体插层聚合、聚丙烯溶液插层和聚丙烯熔融插层等方法制备，得到插层型或剥离型纳米复合材料，形成了与传统填充型聚合物复合材料不同的微观结构，其机械性能，热性能，阻隔性能和流变性能等明显提高，由于聚丙烯的非极性及层状硅酸盐纳米复合材料制备方法的特殊性，该研究具有一定的理论价值。     

有机染料-层状硅酸盐光活性纳米复合材料*

有机-无机纳米复合材料,尤其是有机客体插层入无机层状固体自组装形成的纳米复合材料,因其独特的微观结构与性能,在超分子构筑纳米材料领域中具有特殊地位。本文主要介绍了光致变色与光致发光光功能性有机染料插层层状硅酸盐纳米复合材料的研究进展,着重讨论了螺吡喃、偶氮、二芳基乙烯、芘、香豆素等染料在二维纳米片层间独特的光学行为、有序排列形态、构筑的多层功能性薄膜及其在光功能性材料开发方面的应用前景。     

原位聚合法制备聚丙烯酸甲酯/ZnAl层状双氢氧化物插层纳米复合材料及其形貌特征

近 2 0年来 ,聚合物 /层状无机物纳米复合材料引起了广泛关注 ,与聚合物材料相比 ,该类纳米复合材料在力学、热稳定性、阻燃、气体阻隔等性能方面都有显著增强 .但所报道的绝大部分无机物均采用蒙脱土为代表的层状硅酸盐[1～ 3] ,而以层状双氢氧化物 (Layered double hydroxide,LDH)为基础制备的聚合物 /层状无机物纳米复合材料的报道极少 .LDH是由水镁石结构中的二价阳离子 (M2 + )被三价阳离子 (M3+ )取代而形成的 ,层上产生的剩余正电荷被吸附在层间的阴离子平衡 .与层状硅酸盐相比 ,L DH层间电荷密度高 ,层与层之间相互作用强 ,导…     

新型纳米层状硅酸盐Magadiite主体材料的制备、表征、结构和生成机理研究

利用简单的插层反应方法成功地制备了四丁基氢氧化铵(TBAOH)插层的层状硅酸盐Magadiite纳米复合材料,在室温下该材料溶胶放置30d可以保持稳定,粉体长期保存结构稳定,而且反应时间短,只需30min.利用XRD,FTIR,SEM和HRTEM等方法对样品进行了结构表征.结果表明,TBA⁺离子在层间以双分子层排列,并与层状硅酸盐结合在一起,TBAOH插层后的纳米粒子在玻璃片上进行了重组,粒径分布在10～100nm之间;HRTEM电镜照片进一步证实了剥离的层状硅酸盐纳米粒子在玻璃片上的自组装过程.根据实验结果阐述了TBAOH插层反应形成纳米溶胶的机理.     

动态扭振法观察环氧树脂/蒙脱土插层聚合物的二次固化

聚合物 /无机纳米复合材料是当今材料研究中的热点。但由于无机纳米颗粒在聚合物中不易分散 ,有时用具有纳米层间距的片晶结构的无机矿物 ,如蒙脱土作填料 ,通过聚合时的热效应来撑开片晶达到蒙脱土的纳米级分散 ,制得所谓的插层聚合物〔1〕。插层型纳米复合材料不仅物理力学性能有很大提高 ,并且也为高分子凝聚态物理工作者提供了研究聚合物分子在二维空间受限情况的理想模型。由于在蒙脱土层间和层外的聚合物所处的环境不一样 ,它们的一些行为会有所不同。本文在用动态扭振法研究环氧树脂 /蒙脱土插层聚合物的等温固化行为时 ,观察到了该…     

剥离型聚合物-层状硅酸盐纳米复合材料的线性粘弹性计算

在二元限制模型的基础上,计算了剥离型聚合物-层状硅酸盐纳米复合材料的线性粘弹性,提出了纳米复合材料在低频下的弹性增加主要是由吸附聚合物链长松弛模式引起的.     

聚合物/层状硅酸盐纳米复合材料的环境稳定性

过去的十多年里，聚合物／层状硅酸盐纳米复合材料在制备、结构与性能方面的研究取得了长足的进步。一些聚合物基的纳米复合材料已实现工业生产，在汽车、家电和包装等领域得到应用。环境稳定性是聚合物材料应用的一个重要方面。本文从材料的耐候性、耐热性和阻燃性能的角度出发，评述了近年来聚合物／层状硅酸盐纳米复合材料在紫外光降解、热降解和燃烧性能方面的研究进展，以期对纳米复合材料的基础研究及应用开发有所裨益。     

Thermal and mechanical properties of syndiotactic polystyrene/organoclay nanocomposites with different microstructures

The fabrication of syndiotactic polystyrene (sPS)/organoclay nanocomposite was conducted via a stepwise mixing process with poly(styrene‐co‐vinyloxazolin) (OPS), that is, melt intercalation of OPS into organoclay followed by blending with sPS. The microstructure of nanocomposite mainly depended on the arrangement type of the organic modifier in clay gallery. When organoclays that have a lateral bilayer arrangement were used, an exfoliated structure was obtained, whereas an intercalated structure was obtained when organoclay with a paraffinic monolayer arrangement were used. The thermal and mechanical properties of sPS nanocomposites were investigated in relation to their microstructures. From the thermograms of nonisothermal crystallization and melting, nanocomposites exhibited an enhanced overall crystallization rate but had less reduced crystallinity than a matrix polymer. Clay layers dispersed in a matrix polymer may serve as a nucleating agent and hinder the crystal growth of polymer chains. As a comparison of the two nanocomposites with different microstructures, because of the high degree of dispersion of its clay layer the exfoliated nanocomposite exhibited a faster crystallization rate and a lower degree of crystallinity than the intercalated one. Nanocomposites exhibited higher mechanical properties, such as strength and stiffness, than the matrix polymer as observed in the dynamic mechanical analysis and tensile tests. Exfoliated nanocomposites showed more enhanced mechanical properties than intercalated ones because of the uniformly dispersed clay layers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1685–1693, 2004     

Nanoalloy Based on Clays: Intercalated‐Exfoliated Layered Silicate in High Performance Elastomer

A novel method is described for the preparation of nanocomposites comprising a high performance rubber for tire application and layered silicates clay. In this work nanocomposites of solution‐styrene butadiene rubber (S‐SBR) with montmorillonite layered silicate were prepared with carboxylated nitrile rubber (XNBR), a polar rubber, as a compatibilizer. A sufficient amount of organomodified layered silicate was loaded in carboxylated nitrile rubber (XNBR) and this compound was blended as a master batch in the S‐SBR. Mixed intercalated/exfoliated morphologies in the nanocomposite are evinced by X‐ray diffraction measurements and transmission electron microscopy. Dynamic mechanical analysis also supports the compatibility of the composites. A good dispersion of the layered silicate in the S‐SBR matrix was reflected from the physical properties of the nanocomposites, especially in terms of tensile strength and high elongation properties.     

三元乙丙橡胶/蒙脱土纳米复合材料制备中硫化体系的比较

采用了熔融插层和两种硫化体系硫磺 促进剂和过氧化物体系制备了三元乙丙橡胶 蒙脱土纳米复合材料 ,并将这两种体系形成的纳米复合材料进行了形态、力学性能和光学性能的比较 ,同时采用Flory Rehner方程对它们的硫化行为进行了评价 .X射线衍射 (XRD)、透射电镜 (TEM)、力学性能和光学性能的测试结果表明 ,由硫磺硫化体系制备的纳米复合材料为不透明和剥离型 .其原有的d0 0 1 衍射峰消失 ,有序层被剥离成 10 0～ 2 0 0nm的片层均匀分散在EPDM基体中 ,其力学性能有了极大的提高 ;而过氧化物体系制备的纳米复合材料为半透明和插层型 .对两种体系的硫化行为的评价结果表明 ,随着有机蒙脱土加入量的增加 ,硫磺 促进剂硫化体系的t90 延长 ,交联密度减小 ,最大 最小转矩也变小 ;而过氧化物硫化体系的相应值却变化不大     

Poly(lactic acid)/organoclay nanocomposites: Thermal,rheological properties and foam processing

In this study, polymer nanocomposites based on poly(lactic acid) (PLA) and organically modified layered silicates (organoclay) were prepared by melt mixing in an internal mixer. The exfoliation of organoclay could be attributed to the interaction between the organoclay and PLA molecules and shearing force during mixing. The exfoliated organoclay layers acted as nucleating agents at low content and as the organoclay content increased they became physical hindrance to the chain mobility of PLA. The thermal dynamic mechanical moduli of nanocomposites were also improved by the exfoliation of organoclay; however, the improvement was reduced at high organoclay content. The dynamic rheological studies show that the nanocomposites have higher viscosity and more pronounced elastic properties than pure PLA. Both storage and loss moduli increased with silicate loading at all frequencies and showed nonterminal behavior at low frequencies. The nanocomposites and PLA were then foamed by using the mixture of CO₂ and N₂ as blowing agent in a batch foaming process. Compared with PLA foam, the nanocomposite foams exhibited reduced cell size and increased cell density at very low organoclay content. With the increase of organoclay content, the cell size was decreased and both cell density and foam density were increased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 689–698, 2005     

Barrier and Mechanical Properties of Poly(caprolactone)/organoclay Nanocomposites

In this study, biodegradable poly(caprolactone) (PCL) hybrids with two types of organoclays: Cloisite 30B (30B) and Cloisite 93A (93A) have been prepared by melt mixing and their barrier performance to air permeation and mechanical properties were investigated. The hybrids of PCL/30B were found to be nanocomposites resulted from the strong interaction between organic modifier of 30B and PCL and those of PCL/93A were microcomposites. The barrier performance of PCL/30B nanocomposite film to air permeation was much more improved than pure PCL and PCL/93A microcomposites at low organoclay concentration. With the increase of organoclay content the permeability coefficient was also increased that could attributed to the extra tortuous pathway for gas permeation caused by organoclay exfoliation. The barrier behaviour of PCL/30B nanocomposites could be approximately described by a theoretical model developed for composites. The mechanical properties measurements showed that the reinforcement of organoclay 30B in nanocomposites is more significant than 93A in microcomposites. Both tensile modulus and tensile strength were increased in PCL/30B nanocomposites even at at low amount of organoclay without much loss of strain at break as compared to pure PCL. The significant improvements in both barrier and mechanical properties in PCL nanocomposites could be attributed to the fine dispersion state of organoclay 30B platelets in PCL matrix and the strong interaction between organic modifier of 30B and matrix molecules.     

混合条件对环氧有机土纳米复合材料插层剥离行为及性能的影响

采用X 射线衍射仪、透射电镜 (TEM )研究了混合条件 ,即混合温度和时间 ,对环氧 /16 烷基胺有机蒙脱土体系在固化前的混合物以及加入固化剂、促进剂固化后有机土的插层与剥离行为的影响 .同时采用拉伸试验机、冲击试验机和热机械分析仪测定了插层与剥离型纳米复合材料的物理力学性能 .从X 射线衍射看出 ,有机土很容易在混合过程被环氧所插层 .混合物经固化后可以形成插层型或剥离型纳米复合材料 .存在一个混合温度 时间 插层剥离转变的 3 T图 .只有在一定的混合条件的区域内才能形成剥离型纳米复合材料 .剥离型比插层型纳米复合材料具有较高的力学性能     

Ball milling: An effective technique for the preparation of exfoliated clay filled unsaturated polyester toughened epoxy nanocomposite

This paper investigates the possibility of improving the mechanical and thermal properties of epoxy and unsaturated polyester toughened epoxy resins through the dispersion of octadecyl ammonium ion-exchanged montmorillonite (organoclay) through exfoliated mechanism. The nanocomposites prepared are characterized for their structural change and studied for their crystallite size, mechanical, thermal and water absorption (hydrophilicity) properties. The mechanical data indicates significant improvement in the flexural and tensile properties over the neat epoxy and UP-epoxy matrix according to the percentage content of organoclay. The thermal behavior too shows noticeable enhancement in glass transition temperature T _g and high thermal stability. Hydrophilicity of all the composites decreases irrespective of the concentration of organoclay on the epoxy and UP-epoxy matrices. The homogeneous morphology of epoxy and UP toughened epoxy nanocomposite hybrid systems is ascertained using scanning electron microscope (SEM). X-ray results point out that the cetyl ammonium modified clay filled composites exhibited the exfoliated structure.     

Effect of rubber on properties of nylon-6/unmodified clay/rubber nanocomposites

Three nylon-6/unmodified clay/rubber nanocomposites with high toughness, high stiffness, high heat resistance and reduced flammability were studied in this paper, on basis of three compound powders of ultra-fine full-vulcanized powdered rubber (UFPR)/montmorillonite (UFPRM). It was found that all of the three UFPRs used in the study can help the silicate layers without organic treatment to be exfoliated in the nylon-6 matrix, despite some differences in compatibilities between them and nylon-6. Accordingly, the clay in different UFPRMs at the same loading content can lead to a similar improvement in stiffness and heat resistance of nanocomposites. In other words, UFPRs having different compatibilities with nylon-6 do not affect the stiffness and heat resistance of nanocomposites largely. However, the nylon-6 nanocomposites, modified with different UFPRMs, show different superior properties. Butadiene styrene vinyl-pyridine UFPRM (VP-UFPRM) is more effective in improving toughness of nylon-6. Nylon-6/silicone UFPRM (nylon-6/S-UFPRM) nanocomposite exhibits more reduced flammability, good flowability and high thermal stability. As for nylon-6/acrylate UFPRM (nylon-6/A-UFPRM) nanocomposite, it shows high toughness and thermal stability. Furthermore, the mechanism of unmodified clay exfoliation during the melt compounding and the effect of different UFPRs on the properties of the nylon-6/UFPRM nanocomposites are also discussed.     

Effect of Organoclays on Silicate Layer Structures and Thermal Stabilities of in-situ Polymerized Poly(D-lactide)/Clay Nanocomposites

Six kinds of organoclays were prepared through three kinds of polyols (PTMG, PEA and PCL) to investigate the effects of molecular weight and the chemical structure of organifiers. PTMG based organoclays showed higher ion-exchanged fraction than other organoclays and long chain organifier showed better efficiency in ion-exchanged fraction in the case of PTMG based organifiers. From WAXD and TEM analysis, it was confirmed that PTMG based organoclays formed partially exfoliated or fully exfoliated silicate layer structures. PDLA/clay nanocomposites were prepared by in-situ ring-opening polymerization of D-lactide with PTMG based organoclays as macro-initiators in the presence of equimolar Sn(Oct)₂/PPh₃ complex catalysts. The molecular weight of PDLA/clay nanocomposite decreased as increasing the feeding amount of organoclay because organoclay had hydroxyl terminal groups which can initiate the ring-opening polymerization of D-lactide. From TGA analysis, thermal stabilities of PDLA/clay nanocomposites improved with increasing organoclay content. From WAXD and TEM analysis, organoclay which was prepared by high molecular weight of PTMG based organifier was effective on the exfoliation of silicate layers in the in-situ polymerized PDLA/clay nanocomposite.     

Chiral poly(amide-imide)/organoclay nanocomposites derived from pyromellitoyl-bis-l-isoleucine and benzimidazole containing diamine: synthesis, nanostructure, and properties

In this study, a series of polymer–clay nanocomposite materials, consisting of organosoluble poly(amide-imide) (PAI) matrix and dispersed nanolayers of inorganic montmorillonite clay, were successfully prepared by solution dispersion technique. At first, the reactive organoclay was prepared by using protonated l-isoleucine amino acid as a swelling agent for silicate layers of Cloisite Na⁺. Then, organosoluble PAI containing isoleucine amino acid was synthesized through step-growth polymerization reaction of N,N′-(pyromellitoyl)-bis-isoleucine diacid and 2-(3,5-diaminophenyl)-benzimidazole under green condition using molten tetrabutylammonium bromide. This polymer was end-capped with amine end groups near the completion of the reaction to interact chemically with acidic group of organoclay. Finally, PAI/organoclay nanocomposite films containing 2%, 5%, 10%, and 15% of organoclay were prepared via solution intercalation method through blending of organoclay with the PAI solution. Dispersion of the modified clay in the PAI matrix resulted in a nanostructured material containing intercalated polymer between the silicate layers. Structures of exfoliation were confirmed by X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. Thermogravimetric analysis data indicated that the addition of organoclay into the PAI matrix increased the thermal decomposition temperatures of the obtained nanocomposites compared to the pure PAI.