4,4′-二（4-氯甲酰苯氧基）二苯砜的合成

以DMF作溶剂,在四丁基氟化铵 （TBAF）存在下,对甲基苯基三甲硅基醚（1）和4,4＇-二氯二苯砜（2）于100 ℃反应1 h,合成了4,4＇-二（4-甲基苯氧基）二苯砜（3）,产率为92%;加入催化量的N-溴代丁二酰亚胺（NBS）并在光照条件下,与氧气反应得到中间体-4,4＇-二（4-羧基苯氧基）二苯砜（4）,其产率达90%;将化合物4与二氯亚砜反应合成目标产物4,4＇-二（4-氯甲酰基苯氧基）二苯砜（5）,总收率为74.5%（以对甲基苯基三甲硅基醚为基准计算）.     

含噻吩单元的硅芴共聚物的合成及其蓝色电致发光性能

将少量(摩尔分数为1%—3％)含噻吩的窄带隙单体和宽带隙硅芴单体进行共聚, 合成了聚{9,9-二己基-3,6-硅芴-co-[2,5-二(2-甲基苯撑-4-基)-噻吩]}和聚{9,9-二己基-3,6-硅芴-co-[2,5-二(2-苯撑-4-基)-噻吩]}两类硅芴共聚物, 通过紫外-可见吸收光谱、光致发光光谱, 并制作聚合物发光二极管器件测试电致发光光谱等手段, 系统表征了两类硅芴共聚物材料的性能. 实验结果表明, 噻吩的加入形成了新的蓝色发光中心, 并且实现了从硅芴链段到含噻吩发光中心的有效能量转移. 通过增加发光中心结构的空间位阻来减小其共轭程度, 可以使聚合物的PL和EL光谱发生较大蓝移. 最终得到了效率为0.46%和色坐标(CIE)为(0.19, 0.16)的蓝光LED器件.     

2,7-二溴-4-氨基芴的合成及其光学性质

以芴(1)为原料,通过溴代、硝化、还原反应合成了2,7-二溴-4-氨基芴(4),其结构经1H NMR,13C NMR,IR和ESI-MS确证。分别对溴化、硝化和还原反应条件进行优化。结果表明:在最佳溴化反应条件[CHCl3为溶剂,Cu Br2为催化剂,1 90 mmol,n(1)∶n(Cu Br2)∶n(Br2)=1.0∶0.025∶2.89,于0℃反应24 h]下,溴化产物2,7-二溴芴(2)的产率93.8%;在最佳硝化反应条件[2 30 mmol,混合酸(85%硝酸+96%硫酸)为硝化试剂,n(2)∶n(HNO3)=1.0∶4.6,于70℃反应1 h]下,硝化产物2,7-二溴-4-硝基芴(3)的产率94.7%;在最佳还原反应条件(3 30 mmol,Zn/Ca Cl2为还原剂,回流反应4 h)下,4的产率89.5%。运用UV-Vis和荧光光谱初步研究了4的光学性质。结果表明:4的λmax为352.4 nm;在352.4 nm波长激发下,4的λem位于388.4 nm和412.2 nm,光带隙低至2.66 e V。     

含芴基的旋光末端环氧和环硫化合物的合成

先利用芴与乙醇钠反应或者三苯甲醇与浓磷酸反应, 制备相应的9-烃基芴, 再利用正丁基锂与9-烃基芴反应得到相应的锂盐, 然后在－70 ℃下滴加旋光的环氧氯丙烷, 滴加完毕后在室温搅拌几小时, 得到光学纯的含芴基取代末端环氧化合物, 它们的ee值均大于98%. 将环氧化合物用四氢呋喃溶解, 加入NH₄SCN, 室温搅拌反应24 h, 过柱分离后, 得到光学纯的芴基取代的末端环硫化合物, ee值也均大于97%. 通过元素分析、NMR对产物的结构进行了表征, 也利用旋光仪等测定了产物的旋光度, 并且对反应机理进行了探讨.     

二硅烷表面活性剂的合成与表面性能测定

合成了一种新型有机硅表面活性剂--聚醚改性二硅烷。 首先以(CH3)3SiCl和(CH3)2HSiCl为原料,金属钠作还原偶合剂,二甲苯作溶剂,用Wurtz偶合法合成了含氢二硅烷,对其结构进行了红外光谱、紫外吸收光谱和气相色谱表征,并确定了合成最佳反应条件：n((CH3)3SiCl)∶n((CH3)2HSiCl)=1.2∶1,反应物浓度为1.8 mol/L,助剂15-冠醚-5用量为总反应原料质量的2%,反应温度为80 ℃,反应时间为11 h。 再以合成的含氢二硅烷和甲基封端烯丙基聚醚（Mr=400）为原料,在Karstedt铂催化剂作用下进行硅氢加成反应,合成了聚醚改性二硅烷表面活性剂,确定的合成反应最佳温度为95 ℃,时间为4 h;该表面活性剂的表面张力为22.49 mN/m,临界胶束浓度为0.9 g/L,在pH值为6.94和4.12的水溶液中,具有良好的水解稳定性。     

不同硅铝比的ZSM-11沸石分子筛的催化性能

合成了一系列硅铝比为31—176的ZSM-11沸石,以甲苯-甲醇烷基化、间二甲苯异构化和甲苯歧化三个反应作为探针反应,研究了它们的催化性能。将其与酸性质和晶胞参数相关联发现,低硅铝比适于甲苯歧化,中硅铝比适于间二甲苯异构化,高硅铝比适于甲苯-甲醇烷基化反应。各反应所需的酸强度为甲苯歧化>间二甲苯歧化>间二甲苯异构化>甲苯-甲醇烷基化。Na~+的存在以及用4-甲基喹啉或(CH_3)_3SiCl中毒,可抑制强酸位,明显提高甲苯-甲醇烷基化反应生成对二甲苯的选择性,尤以(CH_3)_3SiCl中毒的低Al/u.c.的NaHZSM-11最佳。     

用GC/MS研究含α-活泼氢芳烃与硝基苯的反应

在常温常压下，研究了苊、蒽、萘、芴、1-甲基萘（1-MN）、2,6-二甲基萘（2,6-DMN）、苯酚、α-萘酚与PhNO2(硝基苯)在Lewis酸AlCl3催化作用下的反应。结果发现，蒽、萘和苯酚与PhNO2不反应，苊、芴、1-MN、2,6-DMN和α-萘酚与PhNO2都能反应生成相应的苯胺基芳烃。GC/MS分析表明反应活性顺序为苊＞1-MN＞2,6-DMN＞芴，根据超共轭效应可以合理解释含α-活泼氢芳烃反应活性顺序。控制AlCl3与苊的摩尔比值为1.2和2.4左右，重结晶苊与PhNO2的反应产物分别得到联苊和5-苯胺基苊纯品，利用GC、GC/MS、FTIR和UV等分析测试手段对其进行了结构鉴定。     

Fe3O4纳米棒和Fe2O3纳米线的热氧化制备与表征

以铁单质和草酸溶液为原料,将0.75mol/L的草酸溶液滴在铁片上,于空气中200-600℃范围内加热1h,制备了Fe3O4纳米棒和Fe2O3纳米线,用扫描电镜（SEM）、X射线衍射仪（XRD）和透射电子显微镜（TEM）对产物进行表征,并研究了反应温度对产物形貌的影响.结果表明,在200-500℃下空气中反应1h在铁片上直接生长出矩形截面的多晶的立方相Fe3O4纳米棒,其直径范围约为0.5-0.8μm.当反应温度为600℃,得到的产物为六方相的Fe2O3纳米线.研究表明,C2H2O4对纳米棒的形成起关键作用,并提出了可能生长机理.     

含二氮杂芴基的旋光环氧化合物的合成及聚合研究

以1,10-邻菲罗啉(1)为原料制备4,5-二氮芴-9-酮(2),并合成4,5-二氮杂芴(3)和9-亚甲基-4,5-二氮杂芴(5),再利用正丁基锂(或甲基锂)与上述两种二氮杂芴反应得到相应的锂盐,在-50℃下与旋光的环氧氯丙烷(ee98%)反应得到光学纯的含二氮杂芴基取代末端环氧化合物,它们的ee值均大于98%.将4,5-二氮芴-9-酮与乙基溴化镁(或苯基溴化镁)反应,得到相应的叔醇.叔醇在氢氧化钾和四丁基溴化铵存在下,与旋光的环氧氯丙烷反应,也得到光学纯的含二氮杂芴基取代末端环氧化合物,ee值均大于97%.将末端环氧化合物在不同条件下聚合,得到分子量分布很窄的含二氮杂芴基的聚醚.通过核磁共振、元素分析、凝胶渗透色谱等手段对产物进行了表征,对影响聚合的相关因素做了探讨.     

1-氮杂环[2.2.2]辛烷的高效合成

将4-（2-羟乙基）哌啶蒸汽在425 ℃下通过CNM-3型固体酸催化剂进行分子内脱水反应,一步合成了目的产物1-氮杂环[2.2.2]辛烷（奎宁环）,4 h内25 g 4-（2-羟乙基）哌啶蒸汽单程收率可达76.8%,最高收率84.3%。 该方法原料易得,适合于奎宁环的工业化制备。     

Bromination of 2,2′-bipyridile

A simple and convenient procedure was developed for the synthesis of 5,5′-dibromo-2,2′-bipyridyl providing the target compound in a high yield without the chromatographic separation of the reaction mixture. Polybromo derivatives of 2,2′-bipyridyl were isolated and characterized for the first time.     

Reaction of N‐Heterocyclic Silylenes with Thioketone: Formation of Silicon–Sulfur Three (Si‐C‐S)‐ and Five (Si‐C‐C‐C‐S)‐Membered Ring Systems

Three‐ and five‐membered rings that bear the (Si‐C‐S ) and (Si‐C‐C‐C‐S ) unit have been synthesized by the reactions of L SiCl ( 1 ; L =PhC(NtBu)₂) and L′ Si ( 2 ; L′ =CH{(C?CH₂)(CMe)(2,6‐iPr₂C₆H₃N)₂}) with the thioketone 4,4′‐bis(dimethylamino)thiobenzophenone. Treatment of 4,4′‐bis(dimethylamino)thiobenzophenone with L SiCl at room temperature furnished the [1+2]‐cycloaddition product silathiacyclopropane 3 . However, reaction of 4,4′‐bis(dimethylamino)thiobenzophenone with L′ Si at low temperature afforded a [1+4]‐cycloaddition to yield the five‐membered ring product 4 . Compounds 3 and 4 were characterized by NMR spectroscopy, EIMS, and elemental analysis. The molecular structures of 3 and 4 were unambiguously established by single‐crystal X‐ray structural analysis. The room‐temperature reaction of 4,4′‐bis(dimethylamino)thiobenzophenone with L′ Si resulted in products 4 and 5 , in which 4 is the dearomatized product and 5 is formed under the 1,3‐migration of a hydrogen atom from the aromatic phenyl ring to the carbon atom of the C? S unit. Furthermore, the optimized structures of probable products were investigated by using DFT calculations.     

Chromium(VI) oxide-mediated oxidation of polyalkyl-polypyridines to polypyridine-polycarboxylic acids with periodic acid

4,4′-Dicarboxy-2,2′-bipyridine was synthesized quantitatively by chromium(VI) oxide-mediated oxidation of 4,4′-dimethyl-2,2′-bipyridine or 4,4′-diethyl-2,2′-bipyridine with periodic acid as the terminal oxidant in sulfuric acid. 5,5′-Dicarboxy-2,2′-bipyridine and 6,6’-dicarboxy-2,2′-bipyridine were also synthesized by the method from the corresponding dimethyl bipyridines in excellent yields. 4,4′,4″-Tricarboxy-2,2′:6′,2″-terpyridine was obtained in 80% yield from 4,4′,4″-triethyl-2,2′:6′,2″-terpyridine, and 4,4′,4″,4′″-tetracarboxy-2,2′:6′,2″:6″,2′″-quaterpyridine was obtained in 72% yield from 4,4′,4″,4′″-tetraethyl-2,2′:6′,2″:6″,2′″-quaterpyridine by the same procedure.     

Efficient Preparative Rentes to 6,6′-Dibromo-2-2′-bipyridine and 6-Bromo-2,2′-bipyridine

The preparation of 6,6′-dibromo-2,2′-bipyridine and 6-bromo-2,2′-bipyridine are described. The dibromo compound was prepared by way of an improved cuprate synthesis resulting in a 72% yield. The monobromo species was prepared from the dibromo compound by way of metal-halogen exchange in 88% yield.     

Synthesis of polymer intermediates containing the hexafluoroisopropylidene group via functionalization of 2,2-diphenylhexafluoropropane

The title compound was synthesized by hydrogenolysis of its precursor 2,2-bis(4-trifluoromethanesulfonatophenyl)hexafluoropropane ( 2 ) in the presence of a base. 2,2-Diphenylhexafluoropropane ( 6 ) can be appropriately functionalized at the 3,3′-positions to give the diamino ( 7 ), dibromo ( 11 ), dicarboxaldehydo ( 13 ), 3-ethynyl-3′-carboxaldehydo ( 14 ) derivatives which are important monomers in the synthesis of various high-temperatures resistant polymers and oligomers containing the hexafluoroisopropylidene (6F) group. 2,2-Bis(4-triflatophenyl)hexafluoropropane ( 2 ) undergoes quantitative dinitration at the 3,3′-positions to yield 2,2-bis(3-nitro-4-triflatophenyl)hexafluoropropane ( 3 ) which ultimately leads to the 3,3′-diamino-4,4′-bis(arylamino) ( 5 ) and 3,3′-diamino-4,4′-dihydroxy ( 8 ) derivatives which are specifically designed for phenylbenzimidazole, benzimidazoquinazoline, and benzoxazole polymers and oligomers.     

Kondesationen mit hydrazin-N,N′-dicarbonsäurediamidin,XXIII [1] fluorierte β-diketone als reaktionspartner

Application of a 30% aqueous potassium carbonate solution for the condensation of 1,2-hydrazinedicaboxamidine with 1,1,1-trifluoro-2,4-pentanedione leads to the formation of 4,4′-dimethyl-6,6′-bis(trifluoromethyl)-2,2′-hydrazopyrimidine, with 1,1,1-trifluoro-2,4-hexanedione to 4,4′-diethyl-6,6′-bis-(trifluoromethyl)-2,2′-hydrazopyrimidine. 2-Guanidinoamino-4-methyl-6-trifluoromethylpyridine formed as an intermediate in this reacton may be isolated, while 4-ethyl-2-guanidinoamino-6-trifluoromethylpyrimidine undergoes cyclization to yield 2-amino-5-ethyl-7-trifluoromethyl-s-triazolo[1,5-a]pyrimidine.     

Synthesis of 2-Bromo-2′-phenyl-5,5′-thiophene: Suzuki Reaction Versus Negishi Reaction

Abstract

2-Bromo-2′-phenyl-5,5′-thiophene was synthesized by cross- coupling reaction of phenylboric acid and 2,2′-dibromo-5,5′-bithiophene with a Suzuki reaction; we found the Suzuki reaction to give a higher yield when compared to the Negishi reaction.     

Cyclisation of benzils

Treatment of several substituted benzils [3,3′- and 4,4′-dimethyl-; 2,2′-, 3,3′- and 4,4′-dichloro-; 3,3′-dibromo-; 4-(N,N-dimethylamino)-] with an excess of chlorosulfonic acid gave the corresponding 3-chloro-2-phenylbenzofuran disulfonyl dichlorides. Disubstitution was confirmed by microanalytical and spectral data for the corresponding bis(N,N-dimethylaminsulfonamides). The positions of electrophilic substitution were not confirmed with 3,3′-dimethyl-, 2,2′- and 3,3′-dichlorobenzils. With 4,4′-dichlorobenzil, a smaller amount of chlorosulfonic acid enabled the isolation of 3,6,4′-trichloro-2-phenylbenzofuran-5-sulfonyl chloride, which was identified by X-ray analysis of the N,N-dimethylsulfonamide. The cyclisation failed with 3,3′-dimethoxy-, and 3,3′- and 4,4′-dinitrobenzils. The results have been interpreted mechanistically.     

Polyurethanes based on anionic macroinitiators,aromatic isocyanates,and 4,4′-dihydroxy-2,2-diphenylpropane

Polyurethanes prepared from anionic initiators, 4,4′-dihydroxy-2,2-diphenylpropane, and aromatic isocyanates were studied by IR spectroscopy. The hydroxy groups in 4,4′-dihydroxy-2,2-diphenylpropane are completely involved in the urethane formation. Variation of the molar ratio of isocyanate and hydroxy groups in the polymer-forming system allows control both of the rigid segment length and of the content of the isocyanurate component in the polymeric matrix. The physicomechanical properties of the polymeric film samples were studied. An increase in the size of the aromatic block is accompanied by enhancement of the strength and plastic deformation of the polymers.     

Synthesis and characterization of tetra-armed-thiosemicarbazone and its salen/salophen capped transition metal complexes: Investigation of their thermal and magnetic properties

In this work, we aimed to synthesize and characterize a novel tetra-directional ligand, (2E,2′E)-2,2′-((((2-(1,3-bis(4-((E)-(2-carbamothioylhydrazono)methyl)phenoxy)propan-2-ylidene)propane-1,3-diyl)bis(oxy))bis(4,1-phenylene))bis(methanylylidene))bis(hydrazinecarbothioamide) (5), including thiosemicarbazone group and its novel tetra-directional-tetra-nuclear Schiff base complexes. For this purpose, we used 1,4-dibromo-2,3-bis(bromomethyl)but-2-ene (2) as starting material. 4,4′-((2-(1,3-Bis(4-formylphenoxy)propan-2-ylidene)propane-1,3-diyl) bis(oxy))dibenzaldehyde (3) was synthesized by the reaction of an equivalent 1,4-dibromo-2,3-bis(bromomethyl)but-2-ene (2) and 4 equivalents of 4-hydroxybenzaldehyde. Then, compound 5 was synthesized in high yield (86%) by a condensation reaction of compound 3 with thiosemicarbazide (4). Finally, four novel tetra-nuclear Cr(III) or Fe(III) complexes of compound 5 were synthesized. The synthesized compounds were characterized using elemental analyses, ¹H NMR, Fourier transform–infrared spectrometry, liquid chromatography–mass spectrometry (ESI⁺), and thermal analyses. The metal ratios of the prepared complexes were determined using an atomic absorption spectrophotometer. We also investigated their effects on the magnetic behaviors of [salen, salophen, Cr(III)/Fe(III)] capped complexes. The complexes were found to be low-spin distorted octahedral Fe(III) and distorted octahedral Cr(III), all bridged by thiosemicarbazone.