Fe-CuS/还原氧化石墨烯(RGO)的制备及其光催化性能

以氯化铜(CuCl_2·2H_2O)、硫脲((NH2)2CS,Tu)、1,2-丙二醇(1,2-PG)、氯化铁(FeCl_3·6H_2O)及氧化石墨烯(GO)为原料,通过溶剂热法制备了具有可见光活性的Fe-CuS/RGO复合材料。采用XRD、SEM、TEM、Raman、XPS、TG、UV-Vis等手段对产品进行了表征,并以亚甲基蓝(MB)为目标降解物对其可见光催化活性进行了研究。光催化结果表明:在汞灯(150 W)下照射140 min,CuS、CuS/RGO和Fe-CuS/RGO对MB的脱色率分别为41.2%、81.5%和90.6%。Fe-CuS/RGO对MB的降解效率较CuS/RGO和CuS有较大提升,可能原因是Fe元素有利于电荷在CuS与RGO界面间传输,降低了光生电子-空穴对的复合几率,进而提高了光催化活性。     

室温一步固相反应合成纳米氧化锌的表征、光催化性能及动力学

以七水硫酸锌、氢氧化钠为原料,采用室温一步固相反应合成ZnO纳米粒子,并分别利用X射线衍射分析（XRD）、傅里叶变换红外光谱分析（FTIR）、热重分析（TG）、扫描电子显微分析（SEM）、透射电子显微分析（TEM）、N₂吸附-脱附、紫外可见漫反射光谱分析（UV-Vis DRS）等方法对ZnO纳米粒子进行表征。实验结果表明：不需任何添加剂,室温下可通过一步固相反应合成ZnO纳米粒子,其形成过程首先是ZnSO₄·7H₂O和NaOH充分接触,然后反应形成Zn₄SO₄（OH）₆·5H₂O,最后NaOH的溶解热可使Zn₄SO₄（OH）₆·5H₂O转变为ZnO并逐渐长大形成纳米粒子。同时以甲基橙为降解对象评价了ZnO纳米粒子的光催化活性,实验结果表明：紫外光照射下,该方法合成的ZnO纳米粒子对甲基橙具有较好的光催化活性,且光催化动力学方程符合准一级反应动力学。     

基于3，4'，5-联苯三羧酸构筑的钕配合物的合成、结构、荧光、光催化及磁性质

采用NdCl₃·6H₂O和3,4'',5-联苯三羧酸（H₃bpt）为原料在DMF/H₂O混合溶剂热条件下合成得到一个三维钕配合物{[Nd （bpt）（DMF）（H₂O）]·2H₂O}_n（1）,并通过红外光谱、元素分析、单晶及粉末X射线衍射表征了配合物1的结构。单晶衍射结果表明,配合物1具有（5,5）-连接的三维结构,拓扑符号为（4⁴·6³·8³）（4⁸ 6²）。此外,对配合物1的热稳定性、荧光性质、光催化降解染料及磁性质进行了详细研究。     

中心金属离子改变诱导MOFs结构和光催化性能的改变

在相同的水热条件下,铜盐、钴盐分别和配体H₂PPCA（H₂PPCA=5-pyrazin-2-yl-1H-pyrazole-3-carboxylic acid）发生反应,生成了2个结构截然不同的金属有机配合物,分别是[Cu（PPCA）（H₂O）]·H₂O（HPU-7）和{[Co（PPCA）（H₂O）]·H₂O}_n（HPU-8）。HPU-7是由CuCl₂·2H₂O与配体在160℃下反应而成的,它呈现出零维的双核铜单元结构。HPU-8是由Co（NO₃）₂·6H₂O与配体在160℃下反应生成的,它呈现出由双核钴单元与配体的骨架相连而成的4,4-连接的二维层结构。中心金属离子的改变导致了不同结构MOF的形成,并且它们的电化学性能研究表明它们是很好的半导体材料,它们都对亚甲基蓝（MB）具有较好的光催化效果。     

稀土离子Tm3+掺杂Bi2WO6的可见光催化性能

以Na₂WO₄·2H₂O和Bi（NO₃）₃·5H₂O为主要原料,采用水热法合成了稀土离子Tm³⁺掺杂的Bi₂WO₆光催化剂。采用XRD、SEM、TEM、Raman、PL、DRS研究了Tm³⁺掺杂Bi₂WO₆的物相,微观形貌和可见光催化性能。结果表明,Tm³⁺掺杂有效提高了Bi₂WO₆的光催化性能,当掺杂量为6%时,样品的光催化性能最好,可见光照射30 min后,对罗丹明B的降解效率达到91.27%,而可见光照射5 h后,对焦糖色素的降解效率达45.25%。与未掺杂Bi₂WO₆相比,分别提高了27.78%和35.22%。     

Ni掺杂黄铁矿型FeS2的溶剂热合成及其可见光催化活性

以FeSO₄·7H₂O、Na₂S₂O₃·5H₂O和NiSO₄·6H₂O为原料,采用溶剂热法合成了Ni掺杂的黄铁矿FeS₂粉体,利用XRD、XPS、FE-SEM、UV-Vis、拉曼光谱等测试手段对所得产物进行了表征分析。结果表明,掺杂适量的Ni可促进白铁矿FeS₂向黄铁矿FeS₂的晶型转变。Ni掺杂有利于提高Ni_xFe_1-xS₂的可见光催化活性,当Ni的掺入量x为0.125时,样品的光催化性能最好。在可见光照射210 min后,亚甲基蓝的降解率为62.8%,与未掺杂FeS₂相比,其降解率提高了26.2%。     

Ni掺杂黄铁矿型FeS2的溶剂热合成及其可见光催化活性

以FeSO₄·7H₂O、Na₂S₂O₃·5H₂O和NiSO₄·6H₂O为原料,采用溶剂热法合成了Ni掺杂的黄铁矿FeS₂粉体,利用XRD、XPS、FE-SEM、UV-Vis、拉曼光谱等测试手段对所得产物进行了表征分析。结果表明,掺杂适量的Ni可促进白铁矿FeS₂向黄铁矿FeS₂的晶型转变。Ni掺杂有利于提高Ni_xFe_1-xS₂的可见光催化活性,当Ni的掺入量x为0.125时,样品的光催化性能最好。在可见光照射210min后,亚甲基蓝的降解率为62.8%,与未掺杂FeS₂相比,其降解率提高了26.2%。     

中心金属离子改变诱导MOFs结构和光催化性能的改变

在相同的水热条件下,铜盐、钴盐分别和配体H₂PPCA（H₂PPCA=5-pyrazin-2-yl-1H-pyrazole-3-carboxylic acid）发生反应,生成了2个结构截然不同的金属有机配合物,分别是[Cu（PPCA）（H₂O）]·H₂O（HPU-7）和{[Co（PPCA）（H₂O）]·H₂O}_n（HPU-8）。HPU-7是由CuCl₂·2H₂O与配体在160℃下反应而成的,它呈现出零维的双核铜单元结构。HPU-8是由Co（NO₃）₂·6H₂O与配体在160℃下反应生成的,它呈现出由双核钴单元与配体的骨架相连而成的4,4-连接的二维层结构。中心金属离子的改变导致了不同结构MOF的形成,并且它们的电化学性能研究表明它们是很好的半导体材料,它们都对亚甲基蓝（MB）具有较好的光催化效果。     

Br-掺杂Bi2WO6的水热法合成及其可见光催化性能

以Bi（NO₃）₃·5H₂O和Na₂WO₄·2H₂O为主要原料,采用水热法合成了纯相Bi₂WO₆,并对其进行非金属离子Br^-掺杂改性。采用XRD、SEM、TEM、XPS、Raman、PL和DRS研究了Br^-掺杂对Bi₂WO₆的物相结构、形貌和可见光催化性能的影响。结果表明,Br^-掺杂可有效提高Bi₂WO₆的可见光催化性能,当掺杂量（物质的量百分数）为8%时,溴掺杂Bi₂WO₆的光催化性能最好,可见光照射40 min后,可降解96.73%的罗丹明-B,与未掺杂Bi₂WO₆相比,其降解率提高了36.32%。     

Ag负载CdMoO4光催化剂的制备及其催化性能

采用硼氢化钠还原法制备了Ag负载CdMoO₄光催化剂。运用X射线粉末衍射（XRD）、扫描电镜（SEM）和透射电镜（TEM）等测试手段对催化剂的组成和结构进行了表征;采用紫外-可见漫反射光谱（UV-Vis DRS）和X射线光电子能谱（XPS）等技术对催化剂的光响应和表面状态进行了分析,考察了不同Ag负载量对CdMoO₄紫外光降解罗丹明B和可见光选择性氧化苯甲醇性能的影响。结果表明,与CdMoO₄相比,Ag/CdMoO₄具有更高的光催化活性。利用活性物种捕获实验探讨其光催化降解过程的反应机理,实验结果显示O₂^-·和·OH是光催化降解过程的主要活性物种。     

Mesoporous Fe2O3-doped TiO2 nanostructured fibers with higher photocatalytic activity

Mesoporous Fe(2)O(3)-doped TiO(2) nanostructured fibers were fabricated through electrospinning the relevant gel precursor. The prepared fibers were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and surface analysis, respectively. The photocatalytic activity of these mesoporous composite fibers was evaluated by photocatalytic degradation of methylene blue (MB) in water under UV irradiation. Compared with different types of photocatalysts, the 1% Fe(2)O(3)-doped TiO(2) fibers exhibited super photocatalytic activity.     

Improving the catalytic activity of magnetic Fe3O4/ZnO-CdO/reduced graphene oxide for ultrasonic degradation of the organic pollutants and the green oxidation of olefins

Magnetic Fe₃O₄/ZnO-CdO/reduced graphene oxide (MFZC/RGO) has been synthesized by simple hydrothermal method. The structure and morphology were investigated by X-ray diffraction (XRD), Transmission electron microscopy (TEM), Scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS), Diffuse reflectance spectroscopy (DRS), Vibrating sample magnetometer (VSM), Raman and Fourier-transform infrared spectroscopy (FTIR). MFZC/RGO was applied as catalyst in degradation of methylene blue (MB), rhodamin B (RhB) and methylorange (MO) under ultrasonic irradiation. Based on the results, excellent degradation efficiencies of MB, RhB and MO (>99%) were achieved within 10, 20 and 20 min, respectively under oxygen flow. Moreover the catalytic property of MFZC/RGO was investigated in oxidation of styrene, α-methyl styrene, cyclohexene and cyclooctene under oxygen flow. In addition, MFZC/RGO can be easily collected and separated by an external magnet. The catalyst displayed negligible loss in activity and selectivity within several successive runs due to super paramagnetism.     

基于单质法合成直接Z型CuS-WO_3及光催化性能

以Cu粉和S粉作为CuS前驱体,基于单质法在低温下原位合成了CuS-WO_3光催化剂。采用X射线衍射(XRD)、扫描电镜(SEM)、X射线光电子能谱(XPS)、比表面积和紫外-可见漫反射光谱(UV-Vis DRS)对CuS-WO_3的晶相、形貌、粒径及光学性质等进行了表征。结果表明,CuS对WO_3的晶相结构、粒径及比表面积没有明显影响,但是可以有效提高WO_3对可见光的吸收。以降解罗丹明B(Rh B)为反应模型,研究了CuS对WO_3光催化性能的影响。结果表明,在可见光照射下,CuS-WO_3复合材料的光催化活性优于CuS、WO_3的光催化活性,且CuS的含量对CuS-WO_3光催化活性影响显著,CuS含量为7%(w,质量分数)时,光催化效率最高(91.3%)。进一步结合CuS、WO_3的能带位置,荧光光谱(PL)活性物种鉴定试验,提出CuS-WO_3复合光催化剂的"直接Z型"光催化机理。直接Z型CuS-WO_3复合光催化剂中可以有效抑制电子-空穴的复合。因此,与CuS和WO_3相比,CuS-WO_3复合光催化剂具有较高的光催化性能。     

可见光下具有高光子效应和光催化活性的CuS-石墨烯氧化物/TiO2复合材料的制备（英文）

CuS-graphene oxide/TiO2 composites were prepared using a sol-gel method to improve the photocatalytic performance of the photocatalyst. The composites were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis, and transmission electron microscopy. The photocatalytic activities were examined by the degradation of methylene blue (MB) under visible-light irradiation. The photodegradation of MB under visible-light irradiation reached 90.1% after 120 min. The kinetics of MB degradation was plotted alongside the values calculated from the Langmuir-Hinshelwood equation. The CuS-graphene oxide/TiO2 sample prepared using 0.2 mol of TiO2 showed the best photocatalytic activity. This was attributed to a cooperative reaction as a result of increased photoabsorption by graphene oxide and an increased photocatalytic effect by CuS.     

还原氧化石墨烯/TiO2纳米复合物制备及其光催化性能

采用一步水热法制备了还原氧化石墨烯-二氧化钛(RGO-P25)纳米复合物.通过透射电子显微镜(TEM)、傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、X射线衍射(XRD)及紫外-可见漫反射谱(UVVisDRS)对复合材料的结构和光电性能进行了表征.在紫外光照和可见光照条件下,研究了不同复合比例的复合物的光催化降解甲基蓝(MB)的性能.结果表明:在水热过程中氧化石墨烯被还原,通过静电引力相互作用得到了具有较高缺陷的还原氧化石墨烯复合物.随着RGO含量的增加,复合物的禁带宽度由3.00 eV变到2.27eV,复合物的导电性增强.在可见光和紫外光光照条件下, 30 min内1%(w,质量分数)RGO-P25光催化降解甲基蓝的效率都超过了80%.紫外光照条件下, 1%RGO-P25纳米复合物催化降解N3染料, cis-Ru(H₂dcbpy)₂(NCS)₂ (H₂dcbpy = 4, 4'-二羧酸-2, 2'-联吡啶), 30 min内63%(摩尔分数)的染料被降解.与P25(75%锐钛矿, 25%金红石)相比,石墨烯的加入大大提高了光催化效率,有效抑制了电子-空穴对的复合.     

Efficient photocatalytic degradation of rhodamine-B by Fe doped CuS diluted magnetic semiconductor nanoparticles under the simulated sunlight irradiation

The present work is planned for a simple, inexpensive and efficient approach for the synthesis of Cu_1-xFe_xS (x = 0.00, 0.01, 0.03, 0.05 and 0.07) nanoparticles via simplistic chemical co-precipitation route by using ethylene diamine tetra acetic acid (EDTA) as a capping molecules. As synthesized nanoparticles were used as competent catalysts for degradation of rhodamine-B organic dye pollutant. The properties of prepared samples were analyzed with energy dispersive analysis of X-rays (EDAX), X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-visible optical absorption spectroscopy, Fourier transform infrared (FTIR) spectra, Raman spectra and vibrating sample magnetometer (VSM). EDAX spectra corroborated the existence of Fe in prepared nanoparticles within close proximity to stoichiometric ratio. XRD, FTIR and Raman patterns affirmed that configuration of single phase hexagonal crystal structure as that of (P6₃/mmc) CuS, without impurity crystals. The average particle size estimated by TEM scrutiny is in the assortment of 5–10 nm. UV-visible optical absorption measurements showed that band gap narrowing with increasing the Fe doping concentration. VSM measurements revealed that 3% Fe doped CuS nanoparticles exhibited strong ferromagnetism at room temperature and changeover of magnetic signs from ferromagnetic to the paramagnetic nature with increasing the Fe doping concentration in CuS host lattice. Among all Fe doped CuS nanoparticles, 3% Fe inclusion CuS sample shows better photocatalytic performance in decomposition of RhB compared with the pristine CuS. Thus as synthesized Cu_0·97Fe_0·03S nanocatalysts are tremendously realistic compounds for photocatalytic fictionalization in the direction of organic dye degradation under visible light.     

Comparison study of BiVO4 heterojunctions photocatalyst with different carbon materials

MWCNT/BiVO₄ and RGO/BiVO₄ heterojunctions were synthesized by the sol–gel method, and the photocatalytic activity of MWCNT/BiVO₄ and RGO/BiVO₄ were evaluated by monitoring the degradation of RhB in a heterogeneous photocatalytic reactor. The catalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy, scanning electron microscopy, Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. The results indicated that a series of heterojunction structure composites were successfully synthesized, the heterojunction structure playing a crucial role in the electron–hole recombination. The crystal structure of BiVO₄ was still monoclinic after the doping of MWCNT and RGO according to the XRD analysis, while the active sites of MWCNT/BiVO₄ and RGO/BiVO₄ were more than pure BiVO₄. The RGO with a two-dimensional carbon sheet expressed higher performance than MWCNT with a one-dimensional carbon sheet for BiVO₄ because the layered structure of the RGO had a stronger electron-trapping capability than MWCNT. The optimal MWCNT content was 2%, and the 6% RGO/BiVO₄ showed the highest photocatalytic degradation efficiency of RhB. The photocatalytic degradation efficiency remained above 80% after five cycle tests.

     

Improved visible light photocatalytic activity of titania loaded with silver on discoloration of a heterocyclic aromatic chemical dye solution

The photocatalytic activity of silver deposited Degussa P25 titanium dioxide (Ag-DP25) in the photodegradation of methylene blue (MB) was investigated. The as-prepared materials were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectroscopy (DRS), infrared spectra and surface photovoltage spectroscopy (SPS) techniques. The obtained results show that the silver dopant could effectively inhibit the recombination of the photoinduced electron and holes, improving the absorption capability for visible light of photocatalyst and leading to increased surface OH group density. The degradation experiment reveals that the catalytic property of Ag-DP25 in the degradation of MB dye is more efficient than that of commercially available Degussa P25 TiO₂ (DP25) samples under visible-light irradiation. Besides, degradation kinetics of MB dye can, be well described by Langmuir-Hinshelwood equation and shows pseudo-first order law.     

RGO/C3N4复合材料的制备及可见光催化性能

通过半封闭一步热裂解法和改进的Hummers法分别制备了类石墨氮化碳(C₃N₄)和氧化石墨烯(GO),再利用光还原方法制得还原氧化石墨烯/氮化碳(RGO/C₃N₄)复合材料。采用X射线衍射(XRD),场发射扫描电镜(FESEM),X射线光电子能谱(XPS),紫外-可见漫反射吸收光谱(DRS),光致荧光(PL)和傅里叶变换红外光谱(FTIR)等测试技术对复合材料进行表征。以罗丹明B(RhB)为探针分子在可见光下考察RGO/C₃N₄复合材料的光催化活性,结果表明：RGO的引入显著提高了C₃N₄的光催化活性,且6.0%RGO/C₃N₄复合物的光催化活性最高,可能的原因是RGO具有优良的传导和接受电子性能,抑制了C₃N₄光生电子-空穴的复合机率,进而提高了光催化活性。