低聚醚磺酸锂／梳形聚醚复合物的单离子导电性

低聚醚磺酸锂／梳形聚醚复合物的单离子导电性郑云贵，万国祥（中国科学院成都有机化学研究所成都６１００４１）关键词低聚醚磺酸锂，单离子导体，阳离子迁移数聚合物阳离子导体一般采用单体盐与能促进离子迁移的单体通过共聚或将其均聚物共混的方式制备’‘－‘’．由于...     

一种磺酸聚醚型表面活性剂的制备及动态表面张力

通过3-氯-2-羟基丙磺酸钠(NaCHPS)和1-氯-3-丁氧基-2-丙醇(CBP)之间溶液共缩聚,合成了一种新型磺酸聚醚表面活性剂—环氧丙磺酸缩水甘油丁基醚共聚物。采用红外、核磁等测试技术对其结构进行了表征。测定了不同质量浓度、不同结构的磺酸聚醚水溶液的动态表面张力(DST),并用Rosen经验方程对DST进行了分析。结果表明,磺酸聚醚的数均分子量为900～1 600,其溶液浓度越高,DST达到介平衡越快,则DST分析曲线越低;当质量浓度从56．4 mg/L增大到3 611 mg/L时,R_(1/2)值从11．04 mN/(m·min)增大到7 662．5 mN/(m·min);磺酸聚醚的动态表面活性随着磺酸聚醚中CBP含量的增加而增强。     

丙烯酰胺—烯丙基磺酸钠共聚物的絮凝性能

丙烯酰胺与含磺酸基单体的共聚物用于提高石油回采率已有不少报道,如乙烯基磺酸、丙烯酸磺丙酯、苯乙烯磺酸、2-丙烯酰胺基-2-甲基丙磺酸和甲基丙烯酸磺乙酯。亦有文献提到用丙烯酰胺与烯丙基磺酸钠共聚物,但缺乏详细报道。国内油田钻井液处理剂中的PAC_(142)和PAC_(143)是丙烯酰胺、烯丙基磺酸钠及其它单体的多元共聚物;日本的钻井液处理剂G-20LL是丙烯酰胺、烯丙基磺酸钠和丙烯酸的三元共聚物。本文报道丙烯酰胺与烯丙基磺酸钠的共聚合及产物的絮凝性能。     

表面解吸常压化学电离质谱直接测定香辛蔬菜化学指纹

采用表面解吸常压化学电离质谱技术在无需样品预处理的前提下,对香辛蔬菜如韭菜、洋葱和大蒜的挥发性成分进行了快速检测,并对部分成分进行了二级串联质谱分析。 结果表明,韭菜叶片挥发性主要成分为2-甲基-2-戊烯、二甲基硫代亚磺酸酯、甲基烯丙基硫代亚磺酸酯等,其中二甲基硫代亚磺酸酯和甲基烯丙基硫代亚磺酸酯产生较强的M+H2O·+信号。 未切开的洋葱鳞茎挥发性成分质谱信号较弱,质谱图中主要是一些电晕放电产生的初始离子信号。 切开后的洋葱鳞茎挥发性成分质谱信号明显增强,主要是丙烯基次磺酸、丙基烯丙基硫代亚磺酸酯和二丙基硫代亚磺酸酯。 大蒜鳞茎挥发性成分主要是二烯丙基硫代亚磺酸酯。 切开后的大蒜鳞茎挥发性成分主要是丙烯基次磺酸。 实验对韭菜的二甲基硫代亚磺酸酯和甲基烯丙基硫代亚磺酸酯、洋葱的丙烯基次磺酸、大蒜的二烯丙基硫代亚磺酸酯进行了二级串联质谱分析。 表面解吸常压化学电离质谱技术无需样品预处理,分析速度快且对样品不造成破坏。     

表面解吸常压化学电离质谱快速测定香辛蔬菜化学指纹

采用表面解吸常压化学电离质谱技术在无需样品预处理的前提下,对香辛蔬菜如韭菜、洋葱和大蒜的挥发性成分进行了快速检测,并对部分成分进行了二级串联质谱分析。结果表明,韭菜叶片挥发性主要成分为2-甲基-2-戊烯、二甲基硫代亚磺酸酯、甲基烯丙基硫代亚磺酸酯等,其中二甲基硫代亚磺酸酯和甲基烯丙基硫代亚磺酸酯产生较强的M+H2O.+信号。未切开的洋葱鳞茎挥发性成分质谱信号较弱,质谱图中主要是一些电晕放电产生的初始离子信号。切开后的洋葱鳞茎挥发性成分质谱信号明显增强,主要是丙烯基次磺酸、丙基烯丙基硫代亚磺酸酯和二丙基硫代亚磺酸酯。大蒜鳞茎挥发性成分主要是二烯丙基硫代亚磺酸酯。切开后的大蒜鳞茎挥发性成分主要是丙烯基次磺酸。实验对韭菜的二甲基硫代亚磺酸酯和甲基烯丙基硫代亚磺酸酯、洋葱的丙烯基次磺酸、大蒜的二烯丙基硫代亚磺酸酯进行了二级串联质谱分析。表面解吸常压化学电离质谱技术无需样品预处理,分析速度快且对样品不造成破坏。     

Li-SGO掺杂半互穿网络型多孔单离子传导聚合物复合电解质的制备

本文成功制备了磺酸锂功能化石墨烯,通过原位聚合方式成功将其添加到单离子传导聚合物电解质中制备出磺酸锂功能化石墨烯改性半互穿网络型多孔单离子传导聚合物复合电解质。与未掺杂磺酸锂功能化石墨烯半互穿网络型多孔单离子传导聚合物电解质相比,该电解质具有更高的孔隙率、吸液率、机械拉伸强度和离子电导率。电化学测试结果表明,掺杂磺酸锂功能化石墨烯后,单离子传导聚合物电解质表现出与电极界面更好的相容性,组装的Li|LiFePO₄锂离子电池表现出良好的循环性能和更高的倍率性能。对氧化石墨烯磺酸锂功能化可应用于对单离子传导聚合物电解质的改性,有助于提升单离子传导聚合物电解质的综合性能,获得更高的电池性能。     

新的有机化学反应

钯酸锂(lithium palladates)与光学活性的烯丙基硅烷,(E)-和(Z)-1-苯基-三甲硅丁基-2-烯以及(E)和(Z)-1-苯基-3甲基硅丁基-2-烯进行立体选择性反应,得到了包含η~3-(1-甲基-3-苯基烯丙基)的光学活性的π-烯丙基钯络合物。     

取代环戊二烯基负离子的二茂铁甲酰化反应

本文以6,6-二烷基富烯与甲基锂, 芳基锂及烯丙基格式试剂反应所得的取代环戊二烯基负离子与二茂铁甲酰氯反应合成了10个新的富烯化合物, 并通过^1HNMR, IR及元素分析确定了它们的结构 .     

双吖啶衍生物与核酸作用的光谱分析

用荧光光谱、紫外可见吸收光谱等方法研究合成的核酸探针与核酸的作用方式,发现DNA对这些物质的荧光具有较强的猝灭效应,其中又以10,10’二乙基-3,3’-二磺酸基-双吖啶（DESAC）、10,10’-二烯丙基-3,3’-二磺酸基-9,9＇-双吖啶（DASAC）、10,10’-二烯丙基-3,3’-二氨基-9,9＇-双吖啶（DAAAC）和10,10’-二乙基-3,3＇-二氨基-双吖啶（DEAAC）这4种物质效果最好,因此有望从这类物质中筛选出良好的核酸探针。     

基于聚苯乙烯磺酸的锂金属负极界面保护层的设计

将聚苯乙烯磺酸(PSS)进行锂化处理后, 涂覆在锂箔表面, 在锂金属表面构筑一层均匀的聚苯乙烯磺酸锂(PSSLi)界面保护层, 形成PSSLi@Li复合电极. 通过红外光谱(FTIR)、 电化学阻抗谱(EIS)、 电池性能分析和有限元多物理场仿真模拟等方法, 对该复合电极进行了结构和性能研究. 结果表明, PSSLi界面保护层能有效地避免电解液与锂金属的直接接触, 抑制了“死锂”和锂枝晶的生成. 聚苯乙烯磺酸锂具有整齐排布的磺酸基团, 为锂离子提供了稳定的传输通道, 能够均匀化锂离子的迁移速率, 调节锂离子在电极表面的浓度分布, 并实现均匀的锂金属沉积/剥离. 电化学实验数据表明, 将该PSSLi界面层涂覆在铜箔表面进行库仑效率测试, 循环 350次实验后仍然能够保持在99.5%以上; 利用PSSLi@Li复合电极组装形成的对称电池, 在1 mA/cm²的电流密度、 1 mA·h/cm²的面积容量下, 能够稳定循环1200 h以上; PSSLi@Li与磷酸铁锂正极材料组装的全电池, 在1C倍率下循环500次后, 仍具有115 mA·h/g的容量, 容量保持率可达81%以上; 在8C的高倍率下, 该电池的容量可达到105 mA·h/g.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.