氧载体的氧物种直接氧化甲烷制合成气

甲烷部分氧化制合成气由于合成气中n(H2)/n(CO)接近2,可直接用于甲醇合成或烃类F-T合成等后续工业过程而在国内外受到了广泛的关注。利用氧载体的氧物种在无气相氧下直接选择氧化甲烷制合成气是天然气化工利用的新方法,本文介绍了该方法的基本原理、概念工艺和对氧载体的性能要求,对应用于该方法的铈基复合氧化物的掺杂和助剂对选择氧化甲烷性能的影响、钙钛矿氧化物氧载体的氧缺陷、氧物种迁移、结构稳定性及其氧物种氧化甲烷的性能进行了阐述和分析,提出了控制氧载体表面状态是获得高合成气选择性的关键,并对该技术今后的研究重点进行了展望。     

Partial oxidation of methane and ethane to oxygenates over silica supported rhenium oxide

Silica supported rhenium oxide has been studied for partial oxidation of methane and ethane with oxygen. Loading of rhenium oxide on silica remarkably increases the conversions of methane and ethane. The presence of rhenium oxide increases the selectivity to useful oxygenates, particularly in ethane oxidation. The results suggest that rhenium oxide not only activates methane or ethane but also enhances oxygen transfer to form oxygenates. This revised version was published online in June 2006 with corrections to the Cover Date.     

THE ROLE OF LATTICE AND GASEOUS OXYGEN ON THE OXIDATIVE COUPLING OF METHANE STUDIED BY A PULSE REACTION TECHNIQUE

A comparative study of the role of lattice and gaseous oxygen in theoxidative coupling of methane over Na~ /Cao and Ca_xSr_(1-x)TiO_3 perovskiteoxide catalysts was performed by using a pulse reaction technique with CH_4,O_2 and mixtures of CH_4and O_2.It was found that there is an oxygen species onthe Surface of Cao which is active only for the total oxidation of methane at thereaction temperature.These oxygen species.once reacted with methane andconsumed,can be regenerated by the adsorption of oxygen molecules from thegas phase or by the migration of the lattice oxysen from the bulk onto thesurface.In contrast,no such oxygen species and no reaction can be detected bymethane pulsed over Ca_xSr_(1-x)TiO_3perovskite oxide catalysts.Na~ can heavilysuppress the non-selective oxygen species on the surface,and When 5mol%Na~ was incorporated onto the surface of Cao,the sample showed no reactivityto methane.When oxygen exists in the gas phase,or the pulse containsmethane and oxygen,the reaction over(Cao is mai     

The Effect of the Active‐Site Structure on the Activity of Copper Mordenite in the Aerobic and Anaerobic Conversion of Methane into Methanol

Samples of the zeolite mordenite with different Si/Al ratios were used to synthesize materials with monomeric and oligomeric copper sites that are active in the direct conversion of methane into methanol. A comparison of two reactivation protocols with oxygen (aerobic oxidation) and water (anaerobic oxidation), respectively, revealed that such copper–oxo species possess different reactivity towards methane and water. We show for the first time that oligomeric copper species exhibit high activity under both aerobic and anaerobic activation conditions, whereas monomeric copper sites produce methanol only in aerobic processes.     

Comparative Effectiveness of Oxygen and Nitrous Oxide in the Partial Oxidation of Methane on V2O5/SiO2

It is shown that at relatively low temperatures the rate of oxidation of methane by nitrous oxide over the catalyst V₂O₅/SiO₂ exceeds the rate of oxidation of methane by oxygen, whereas at higher temperatures the opposite relation is observed between the comparative rates of the reactions. This effect is explained on the basis of a heterogeneous chain mechanism for the oxidation of methane.     

Direct partial oxidation of methane to methanol： Reaction zones and role of catalyst location

Direct partial oxidation of methane to methanol was investigated in a specially designed reactor. Methanol yield of about 7%-8% was obtained in gas phase partial oxidation. It was proposed that the reactor could be divided into three reaction zones, namely pre-reaction zone, fierce reaction zone, and post-reaction zone, when the temperature was high enough to initiate a reaction. The oxidation of methane proceeded and was completed mostly in the fierce reaction zone. When the reactant mixture entered the post-reaction zone, only a small amount of produced methanol would bring about secondary reactions, because molecular oxygen had been exhausted in the fierce reaction zone. A catalyst, if necessary, should be placed either in the pre-reaction zone, to initiate a partial oxidation reaction at a lower temperature, or in the fierce reaction zone to control the homogeneous free radical reaction.     

甲烷催化氧化制含氧化合物的研究*

本文对甲烷催化氧化制含氧化合物的研究, 从多相催化和液相催化两个方面进行了综述; 对多相催化的研究从催化剂的选择、反应温度、反应压力、氧源、反应添加物、反应器及反应机理等方面进行了总结, 液相氧化的研究则对不同的研究体系进行了详细的综述。     

Recent Progress in Direct Partial Oxidation of Methane to Methanol

The direct conversion of methane to methanol has attracted a great deal of attention for nearly a century since it was first found possible in 1902, and it is still a challenging task. This review article describes recent advancements in the direct partial oxidation of methane to methanol. The history of direct oxidation of methane and the difficulties encountered in the partial oxidation of methane to methanol are briefly summarized. Recently reported developments in gas-phase homogeneous oxidation, heterogeneous catalytic oxidation and liquid phase homogeneous catalytic oxidation of methane axe reviewed.     

STUDY ON THE MOBILITY AND REACTIVITY OF OXYGEN OF CERIA-BASED OCM CATALYSTS BY TEMPERATUREPROGRAMMED PULSE REACTION(TPPR)

IntroductionThisprojectwassupportedbytheNationalNaturalScienceFoundationofChina.Becausemostofthecatalystsforoxidativecouplingofmethane(OCM)arecompositechides,thereactivitiesofdifferentkindsofoxygenspeciesareeXtensivelystudied.Generally,agoodOCMcatalystsho…     

微波场对固态氧离子导体上的甲烷氧化偶朕的影响

研究了微波场下甲烷在具有Bi2O3结构的固态氧离子导体上氧化偶联反应行为．与常规加热条件下的反应结果相比较,微波辐照下的反应有如下特点;（1）在达到相同甲烷转化率时,微波辐照下所需床层温度要远低于常规加热条件下所需床层温度;（2）微波辐照下,甲烷氧化偶联产物中C2烃的选择性普遍较高,在低温区尤为突出．微波场下甲烷偶联产物乙烷、乙烯的再氧化得到一定程度的抑制,致使微波场下的甲烷氧化偶联反应通常有较低的烯／烷比．     

Selective Coke Combustion by Oxygen Pulsing During Mo/ZSM‐5‐Catalyzed Methane Dehydroaromatization

Non‐oxidative methane dehydroaromatization is a promising reaction to directly convert natural gas into aromatic hydrocarbons and hydrogen. Commercialization of this technology is hampered by rapid catalyst deactivation because of coking. A novel approach is presented involving selective oxidation of coke during methane dehydroaromatization at 700 °C. Periodic pulsing of oxygen into the methane feed results in substantially higher cumulative product yield with synthesis gas; a H₂/CO ratio close to two is the main side‐product of coke combustion. Using ¹³C isotope labeling of methane it is demonstrated that oxygen predominantly reacts with molybdenum carbide species. The resulting molybdenum oxides catalyze coke oxidation. Less than one‐fifth of the available oxygen reacts with gaseous methane. Combined with periodic regeneration at 550 °C, this strategy is a significant step forward, towards a process for converting methane into liquid hydrocarbons.     

Ce-Fe-Zr-O/MgO整体型氧载体用于化学链部分氧化甲烷制合成气

以MgO为载体,采用球磨法制备了Ce-Fe-Zr-O/MgO粉末状氧载体,进而采用挤压成型法制备了整体型氧载体。研究了两种氧载体化学链部分氧化甲烷制合成气的性能,并通过XRD、H₂-TPR对氧载体进行表征。结果表明,粉末状氧载体中的储氧组分以Ce-Fe-Zr-O固溶体形式存在,而整体型氧载体的制备过程会导致Zr、Fe游离氧化物的形成。粉末状氧载体和整体型氧载体上均存在表面晶格氧和体相晶格氧,其中,体相晶格氧具有高选择性氧化甲烷的性能,可以将甲烷转化成CO和H₂。粉末状氧载体与甲烷反应活性较高,但其存在高含量的表面氧,易导致甲烷的完全氧化。整体型氧载体上体相晶格氧占据优势,可将甲烷选择性氧化为CO和H₂。氧化还原循环实验表明,粉末状氧载体在还原反应发生短时间内容易引起甲烷裂解导致产物气中的H₂/CO物质的量比显著大于2.0,同时产生大量积炭,制约了其循环性能。而整体型氧载体经10次循环实验后,全程反应过程中合成气H₂/CO物质的量比一直维持在2.0附近,显示了较高的循环稳定性能。     

The Effect of Nb Loading on Catalytic Properties of Ni/Ce0.75Zr0.25O2 Catalyst for Methane Partial Oxidation

In this study,the effect of Nb loading on the catalytic activity of Ce_(0.75)Zr_(0.25)O_2-supported Ni catalysts was studied for methane partial oxidation.The catalysts were characterized by BET,H_2 chemisorption,XRD,TPR,TEM and tested for methane partial oxidation to syngas in the temperature range of 400-800℃at atmospheric pressure.The results showed that the activity of methane partial oxidation on the catalysts was apparently dependent on Nb loading.It seemed that the addition of Nb lowered the catalytic activity for methane partial oxidation and increased the extent of carbon deposition. This might be due to the strong interaction between NiO and Nb-modified support and reduction of surface oxygen reducibility.     

Synthesis, hydrothermal stability and thermal reaction behavior of nepheline hydrate i (NH I)

Summary The activity of Pt/Ce_1-xGd_xO_2-y samples in steam and dry reforming of methane at short contact times correlates with the lattice oxygen mobility. For the partial oxidation of methane (POM), the oxygen mobility should be optimized to prevent methane combustion.     

CeO2 as the Oxygen Carrier for Partial Oxidation of Methane to Synthesis Gas in Molten Salts： Thermodynamic Analysis and Experimental Investigation

A new technique -- the direct partial oxidation of methane to synthesis gas using lattice oxygen in molten salts medium has been introduced. Using CeO2 as the oxygen carrier, thermodynamic data were calculated in the reaction process, and the results indicated that direct partial oxidation of methane to synthesis gas using lattice oxygen of cerium oxide is feasible in theory. In a stainless steel reactor, the effects of temperature and varying amounts of γ-Al2O3 supported CeO2 on cn4 conversion, H2 and CO selectivity, were investigated, respectively. The results show that 10% CeO2/γ-Al2O3 has the maximal reaction activity at a temperature of 865 ℃ and above, the H2/CO ratio in the gas that has been produced reaches 2 and the CH4 conversion, H2 and CO selectivity reached the following percentages： i.e. 61%, 89%, and 91% at 870 ℃, respectively. In addition, increase of reaction temperature is favorable for the partial oxidation of methane.     

铈基复合氧化物中晶格氧用于甲烷部分氧化制合成气

采用共沉淀法制备了Ce-M-O氧载体（M＝Fe、Mn、Cu）,并进行了XRD表征。研究了Ce-M-O中晶格氧部分氧化甲烷制合成气的反应。考察了再生时间、再生温度对氧载体部分氧化甲烷性能的影响。研究结果表明, Ce-Fe-O固溶体中的晶格氧适于部分氧化甲烷制合成气。在新鲜的Ce Fe O氧载体上存在少量的强氧化物种,导致开始阶段大部分甲烷被完全氧化,然后该氧载体能均匀地释放出具有高选择性的体相晶格氧将甲烷氧化为CO和H2。通过对氧载体再生条件的控制,可以有效提高目标产物的选择性,当再生温度为850℃,再生时间为7min时, 获得了最大的CO（96.68%）和H2（97.56%）选择性,同时H2与CO摩尔比达到2.02。在无气相氧存在下,用Ce-Fe-O中晶格氧实现甲烷部分氧化制合成气的方法是可行的。     

Characterization and CO oxidation catalytic behavior of CuO/CeO2 catalysts

Summary Effects of the lattice oxygen mobility, Pt dispersion and the surface features of Pt/Ce_1-xPr_xO_2-y samples on their performance in the selective oxidation of methane into syngas, in the steam and dry reforming of methane at short contact times are considered.     

Properties of oxygen permeation and partial oxidation of methane in La0.6Sr0.4CoO3−δ (LSC)–La0.7Sr0.3Ga0.6Fe0.4O3−δ (LSGF) membrane

The oxygen separation membrane having perovskite structure for the partial oxidation of methane to synthesis gas was prepared. La_0.7Sr_0.3Ga_0.6Fe_0.4O_3−δ (LSGF) perovskite membrane coated with La_0.6Sr_0.4CoO_3−δ (LSC) (M1), and the one side of M1 membrane coated with NiO (M2) was prepared to examine the partial oxidation of methane. The single oxygen permeations of the LSC + LSGF (M1) membrane and NiO coated membrane (M2) were measured. The oxygen permeation flux in M1 membrane was higher than that of M1 membrane at 850 °C.

The partial oxidation experiment of methane using the prepared membranes was examined at 850 °C. The value of CH₄ conversion and CO selectivity of M2 membrane was higher than that of M1 membrane.

NiO/NiAl₂O₄ catalyst was used to improve the methane conversion, and the partial oxidation experiment of methane with M1 membrane was examined at 850 °C. The CH₄ conversion was 88%, and CO selectivity was 100%.     

STUDY OF THE CATALYTIC TECHNOLOGY IN THE OXIDATIVE COUPLING OF METHANE

The temperature of the catalyst bed in the oxidative coupling ofmethane would rise and be higher than the wall temperature when the amountof catalyst, the space velocity and the ratio of oxygen to methane wereincreased. Various aspects of the catalytic technology including the thickness ofthe catalyst bed, the mode of catalyst charge, the ratio of CH_4 to O_2 and thespece velocity were studied. An optimum temperature of the catalyst bed forhigher methane conversion and C_2 selectivity was investigated. It was foundthat the burning of methane in the gas phase to form CO occurred at certaintemperatures with some ratios of oxygen to methane. Additionally, the effectof adding water to the reaction feed gas was studied.     

甲烷氧化偶联Mn_2O_3-Na_2WO_4/SiO_2催化剂——Ⅲ.高温(700—800℃)XRD和XPS研究

在本工作的研究报导Ⅰ和Ⅱ(见本期477页和481页)中,已对Mn_2O_3-Na_2WO_4/SiO_2催化剂活性相的表面分散状态、表面氧种和表面结构进行了详细表征。但甲烷氧化偶联反应在高温(700—800℃)下进行。本文进一步对该催化剂在此反应高温下的XRD和XPS研究表明,其表面状态较室温下有显著变化,结合前文的室温下表征结果,使我们对高温反应条件下该催化剂组分间协同作用、表面活性氧种和活性位结构性质有了进一步的理解,并有可能对其甲烷催化活化机理进行较为深入的探讨。