(TbDy)Fe2基定向凝固磁致伸缩合金的性能与组织和成分的关系

制备（ＴｂＤｙ）Ｆｅ２基磁致伸缩合金的过程中，采用改进的Ｂｒｉｄｇｍａｎ技术使（ＴｂＤｙ）Ｆｅ２基相形成沿〈１１０〉晶向取向生长的组织，控制Ｆｅ／（Ｔｂ＋Ｄｙ）＝１９０～１９５（原子比）以防止（ＴｂＤｙ）Ｆｅ３相出现，控制Ｄｙ／Ｔｂ≈０７０／０３０以减小（ＴｂＤｙ）Ｆｅ２相的磁晶各向异性，控制氧含量低于０５ｍｇ·ｇ－１以保证晶体的稳定性等技术措施，获得了最高磁致伸缩应变（８０ｋＡ·ｍ－１）达１５００×１０－６的产品。晶体直径为６～３０ｍｍ，最大长度达３００ｍｍ。     

(Ce_(0.67)Tb_(0.33))MgAl_(11)O_(19)和BaMgAl_(10)O_(17)∶Eu~(2 )荧光体的微波辐射合成及其发光性能

用微波辐射法合成了（Ｃｅ０．６７Ｔｂ０．３３）ＭｇＡｌ１１Ｏ１９（ＰＧ）和ＢａＭｇＡｌ１０Ｏ１７（ＰＢ）两种荧光体，经Ｘ射线粉末衍射分析，其ｄ值和Ｉ／Ｉ０值与ＪＣＰＤＦ３６７３和２６１６３基本一致。计算得到ＰＧ的晶胞参数ａ＝０５５８２ｎｍ，ｃ＝２１８８４ｎｍ；Ｐ－Ｂ的晶胞参数α＝０５６１６ｎｍ，ｃ＝２２６１４ｎｍ。测定了两种荧光体的激发光谱和发射光谱。Ｐ－Ｇ的色坐标ｘ＝０３１６，ｙ＝０５６５；Ｐ－Ｂ的色坐标ｘ＝０１５６，ｙ＝０１０６。与市售同类荧光粉相比，Ｐ－Ｇ的相对发光强度为８８％，Ｐ－Ｂ的相对发光强度为８０％。     

Eu_（0．5）RE_（0．5）Fe_（0．5）Mn_（0．5）O_3的~（57）Fe Msosbauer谱研究

利用固相反应合成了Ｅｕ_（０．５）ＲＥ_（０．５）Ｆｅ_（０．５）Ｍｎ_（０．５）Ｏ_３（ＲＥ＝Ｌａ，Ｐｒ，Ｎｄ，Ｓｍ，Ｅｕ，Ｇｄ，Ｔｂ，Ｄｙ，Ｈｏ，Ｅｒ，Ｔｍ，Ｙｂ，Ｙ）等化合物。测量了其ＸＲＤ谱及~（５７）ＦｅＭｓｓｂａｕｅｒ谱．实验发现，随着ＲＥ原子序数的增加，样品的晶胞体积减小，Ｆｅ在化合物中处于Ｆｅ~（３＋）的高自旋状态，~（５７）Ｆｅ的四极裂矩与样品的畸变参数Ｄ成线性关系。     

纳米晶La_（1－_x）Sr_xFeO_3的合成及气敏特性的研究

用柠檬酸盐法合成出Ｌａ_（１－_ｘ）Ｓｒ_ｘＦｅＯ_３（ｘ＝０．１，０．２，０．３，０．４）原粉，再经固相反应得到纳米晶粉末，用ＴＧ、ＤＴＡ、ＸＲＤ、ＩＲ进行了表征，确证复合氧化物Ｌａ_（１－_ｘ）Ｓｒ_ｘＦｅＯ_３为钙钛矿型结构，粒径在１０～２５ｎｍ之间。实验结果表明，随着固相反应条件不同，产物粒径呈规律性变化．气敏特性研究表明，该纳米晶材料对乙醇有较高的选择性和灵敏度，其选择性顺序为Ｌａ_（０．９）Ｓｒ_（０．１）ＦｅＯ_３＞ＬａＦｅＯ_３＞ＬａＦｅＯ_３（大晶粒）。     

稀土取代的复合氧化物Eu_（0．5）RE_（0．5）Fe_（0．5）Mn_（0．

利用固相反应合成了稀土取代的复合氧化物Ｅｕ_（０．５）ＲＥ_（０．５）Ｆｅ_（０．５）Ｍｎ_（０．５）Ｏ_３（ＲＥ＝Ｌａ，Ｐｒ，Ｎｄ，Ｓｍ，Ｇｄ，Ｔｂ，Ｄｙ，Ｈｏ，Ｅｒ，Ｔｍ，Ｙｂ）．测量了这些化合物的ＸＲＤ和ＸＰＳ谱。在ＸＰＳ研究中发现，稀土取代而使稀土元素本身的结合能相对于其倍半氧化物中的有所降低；在取代的复合氧化物中，随着ＲＥ离子半径的减小，Ｆｅ、Ｍｎ的结合能随之增加。     

稀土取代的复合氧化物Eu0.5RE0.5Fe0.5Mn0.5O3的XPS研究

利用固相反应合成了稀土取代的复合氧化物Ｅｕ０．５ＲＥ０．５Ｆｅ０．５Ｍｎ０．５Ｏ３（ＲＥ＝Ｌａ，Ｐｒ，Ｎｄ，Ｓｍ，Ｇｄ，Ｔｂ，Ｄｙ，Ｈｏ，Ｅｒ，Ｔｍ，Ｙｂ），测量了这些化合物的ＸＲＤ和ＸＰＳ谱，在ＸＰＳ研究中发现，稀土取代而使稀土元素本身的结合能相对于其倍半氧化物中的有所降低，在取代的复合氧化物中，随着ＲＥ离子半的减小，Ｆｅ２ｐ３／２，Ｍｎ２ｐ３／２的结合能随之增加。     

稀土溴化物与甘氨酸配合物标准摩尔生成焓的测定

采用量热法在２９８１５±０１０Ｋ测量了ＲＥＢｒ３·３Ｇｌｙ·３Ｈ２Ｏ（ＲＥ＝Ｌａ、Ｃｅ、Ｐｒ、Ｎｄ、Ｓｍ、Ｅｕ、Ｇｄ、Ｔｂ、Ｄｙ、Ｙ；Ｇｌｙ为甘氨酸）和甘氨酸在水中的积分溶解热，及ＲＥＢｒ３·ｎＨ２Ｏ（ＲＥ＝Ｌａ、Ｃｅ、Ｐｒ时，ｎ＝７；ＲＥ＝Ｎｄ、Ｓｍ、Ｅｕ、Ｇｄ、Ｔｂ、Ｄｙ、Ｙ时，ｎ＝６）在甘氨酸水溶液中的积分溶解热。用本研究设计的热化学循环求得上述１０种ＲＥＢｒ３·３Ｇｌｙ·３Ｈ２Ｏ配合物的标准摩尔生成焓，并计算出它们的晶格能。     

氟碳铈精矿碳酸钠焙烧反应机制

采用ＸＲＤ、ＤＴＡＴＧ及化学分析法，研究了氟碳铈精矿碳酸钠焙烧反应。结果表明，焙烧过程中，发生Ｆ－＋Ｃｅ３＋（Ｐｒ３＋）→Ｏ２－＋Ｃｅ４＋（Ｐｒ４＋）的类质同象替代，生成ＲＥＯ１＋ｘＦ１－ｘ（０＜ｘ＜１）类质同象混晶体，在不同条件下，可生成不同组成的类质同象混晶体。从实验数据得到ＲＥＯ１＋ｘＦ１－ｘ类质同象混晶体的晶胞参数ａ０与其氟含量的关系式为：ａ０＝０５４４９＋０００１０２×ｃＦ－。     

LaB6-ZrB2共晶复合材料的组织特征及控制

用电弧炉和电子束悬浮区熔炉法制备了ＬａＢ６ＺｒＢ２共晶复合材料，并用ＳＥＭ和ＴＥＭ方法对其显微组织进行了研究。结果表明，ＬａＢ６ＺｒＢ２形成纤维状共晶组织，控制凝固条件可得到定向排列的组织，ＬａＢ６基体上均匀分布着直径为０２～１２μｍ的ＺｒＢ２纤维，纤维长度可达１００μｍ以上。对于固液界面为平面生长的试样，其结晶学取向关系为［００１］ＬａＢ６∥［００１］ＺｒＢ２，（１１０）ＬａＢ６∥（０１０）ＺｒＢ２。     

Studies of surface alloy as high efficient electrocatalyst for glyoxylic acid synthesis

运用电化学方法，研制了三种表面合金（ＰｂＳｂＰｔ／ＧＣ，ＳｂＰｔ／ＧＣ，ＰｂＰｔ／ＧＣ）电催化剂，发现在草酸还原生成乙醛酸的电有机合成中这些表面合金电催化剂有较高的活性，其起始还原电位分别比在Ｐｂ阴极上（１．１Ｖ）提前了０．４８～０．７０Ｖ。这三种表面合金电催化剂的活性次序为：ＰｂＳｂＰｔ／ＧＣ＞ＳｂＰｔ／ＧＣ＞ＰｂＰｔ／ＧＣ。红外光谱结果表明，在这些表面合金电极上草酸还原产物主要为乙醛酸。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.