Alkaline hydrogen peroxide pretreatment of energy crops for biogas production

In this study, the influence of alkaline hydrogen peroxide (H₂O₂) pretreatment of the three different plant sources: Miscanthus giganteus, Sorghum Moench, and Sida hermaphrodita, for biogas production was investigated. The influence of temperature, reaction time, and H₂O₂ concentration on the efficiency of biomass degradation and on the further methanogenic fermentation were studied. The results obtained after chemical pretreatment indicate that using H₂O₂ at alkaline conditions leads to the decomposition of three major structures: lignin, hemicellulose, and cellulose. The best results were achieved for the process performed at 25°C for 24 h with the use of a 5 mass % H₂O₂ solution. Although the degradation level was very high for all three plant sources, the biogas production from the energy crops pretreated chemically was strongly inhibited by byproducts and the residual oxygen formed after H₂O₂ decomposition. This fact indicates that alkaline H₂O₂ pretreatment is a very promising method for plant material degradation for further biogas production, but pretreated biomass must be separated from supernatant before the fermentation process because of the high concentration of inhibitors in the hydrolysates. The best results were obtained for Sida with biogas and methane production of 2.29 Ndm³ and 1.06 Ndm³, respectively.     

Efficacy of hydrolytic enzyme augmentation and thermochemical pretreatments for increased secondary anaerobic digestion of treated municipal sewage sludges

Rising costs for landfill disposal of municipal sewage residues have prompted evaluation of alternative methods for reducing the bulk of the final waste. Representative samples of municipal sewage sludge residues were obtained from three major treatment plants in the United States, including Los Angeles (Hyperion), Denver (North Metro), and Chicago (Stickney). The majority of the treated, dewatered sewage sludge solids was found to be volatile (50–60%) and, presumably, biodegradable. Additionally, much of the volatile content was solubilized by both acid detergent fiber and neutral detergent fiber treatments, and was presumed to be proteineous microbial biomass in nature. Both low- and high-solids anaerobic digester systems, as well as the standard biochemical methane potential (BMP) assay, were utilized to evaluate the anaerobic digestibility of these sewage sludge residues. The low methane yields and, thus, the poor organic waste conversion indicated the need for treatment prior to bioconversion. The effectivenesss of various pretreatments based on assessment of increased soluble protein or organics and anaerobic digestibility as determined by the BMP assay was evaluated.     

Kinetic models based in biomass components for the combustion and pyrolysis of sewage sludge and its compost

In the present work, pyrolysis and combustion of the sewage sludge (fresh and composted) have been simulated using five fractions: low stability organic compounds, hemicellulose, cellulose, lignin-plastic, and inorganic compounds. Thermal behavior and kinetic parameters (pre-exponential factor and apparent activation energy) of the main components of the sludge are similar to those reported for hemicellulose, cellulose, and lignin present in lignocellulosic biomass. Comparing non-isothermal thermogravimetric analysis data obtained from fresh and composted sewage sludge, it is possible to measure the efficiency of the composting process. Most of the biodegradable matter is volatized in a temperature range from 150 °C to 400 °C. Non-biodegradable organic matter volatilizes between 400 °C and 550 °C. In both, fresh and composted sludges, oxygen presence increases the mass loss rate at any temperature, but differences between pyrolysis and combustion are focused in two clearly defined ranges. At low temperature (200–350 °C), mass loss is related with a volatilization process. At higher temperature (350–550 °C), mass loss is due to slow char oxidation (oxidative pyrolysis).     

Evaluation of different biomass materials as feedstock for fermentable sugar production

Saline crops and autoclaved municipal organic solid wastes were evaluated for their potential to be used as feedstock for fermentable sugar production through dilute acid pretreatment and enzymatic hydrolysis. The saline crops included two woods, athel (Tamarix aphylla L) and eucalyptus (Eucalyptus camaldulensis), and two grasses, Jose tall wheatgrass (Agropyron elongatum), and creeping wild rye (Leymus triticoides). Each of the biomass materials was first treated with dilute sulfuric acid under selected conditions (acid concentration =1.4% (w/w), temperature =165 degrees C, and time =8 min) and then treated with the enzymes (cellulases and beta-glucosidase). The chemical composition (cellulose, hemicellulose, and lignin contents) of each biomass material and the yield of total and different types of sugars after the acid and enzyme treatment were determined. The results showed that among the saline crops evaluated, the two grasses (creeping wild rye and Jose tall wheatgrass) had the highest glucose yield (87% of total cellulose hydrolyzed) and fastest reaction rate during the enzyme treatment. The autoclaved municipal organic solid wastes showed reasonable glucose yield (64%). Of the two wood species evaluated, Athel has higher glucose yield (60% conversion of cellulose) than eucalyptus (38% conversion of cellulose).     

Enhanced Saccharification of Biologically Pretreated Wheat Straw for Ethanol Production

The biological pretreatment of lignocellulosic biomass with white-rot fungi for the production of bioethanol is an alternative to the most used physico-chemical processes. After biological treatment, a solid composed of cellulose, hemicellulose, and lignin—this latter is with a composition lower than that found in the initial substrate—is obtained. On the contrary, after applying physico-chemical methods, most of the hemicellulose fraction is solubilized, while cellulose and lignin fractions remain in the solid. The optimization of the combination of cellulases and hemicellulases required to saccharify wheat straw pretreated with the white-rot fungus Irpex lacteus was carried out in this work. The application of the optimal dosage made possible the increase of the sugar yield from 33 to 54 %, and at the same time the reduction of the quantity of enzymatic mixture in 40 %, with respect to the initial dosage. The application of a pre-hydrolysis step with xylanases was also studied.     

Application of a detailed reaction mechanism to pyrolysis of Miscanthus giganteus

The objective of this contribution is to describe thermal degradation of Miscanthus giganteus by a detailed reaction mechanism. It includes degradation kinetics for cellulose, hemicellulose and lignin which constitute the major mass fractions of M. giganteus. Furthermore, the mechanism yields a detailed composition of product gases, and is therefore well-suited to predict evolution of both thermal decomposition and products. Therefore, the reaction mechanism was introduced to the Discrete Particle Method (DPM) that solves the coupled differential conservation equations for mass, momentum, species, and energy for a M. giganteus particle. Predicted results were compared to experimental data and yielded good agreement.     

Study of the pyrolysis liquids obtained from different sewage sludge

Pyrolysis of sewage sludge in fluidized bed to produce bio-oil is under study as a useful way to valorise this waste. Sewage sludge is the waste produced in the wastewater treatment plants. Its composition may change due to the origin and to the non-standardized treatments in the wastewater treatment plants. The pyrolysis of three samples of anaerobically digested sewage sludge obtained from three different urban wastewater treatment plants was studied in this work. The organic and inorganic matter composition, and the volatile and ash content of these sewage sludge samples were different. The influence of these parameters on the pyrolysis product distribution and on some characteristics of these products was studied. It was determined that the ash content of the raw material had an enormous influence on the sewage sludge pyrolysis. An increase in the ash content of the sewage sludge caused an increase in the gas yield and a decrease in the liquid and the solid yield with the operational conditions studied. The increase of the volatile content of the sewage sludge samples caused an increase in the liquid yield. The H₂ proportion was the most influenced non-condensable gas. It increased significantly with the ash content. The viscosity of the pyrolysis oils decreased when the ash content augmented. On the other hand, the water content depended on the organic composition of the sewage sludge samples. The chemical composition of the pyrolysis oils was also affected by the sewage sludge ash content above all the proportion of polyaromatic hydrocarbons and nitrogen-containing aromatic compounds. These compound groups increased with the augment of the sewage sludge ash content. The oxygen-containing aliphatic compounds and the steroids decreased with the ash content, although its proportion in the sewage sludge liquid was also influenced by the organic matter composition of the sewage sludge samples.     

Thermal characteristics of the combustion process of biomass and sewage sludge

The combustion of two kinds of biomass and sewage sludge was studied. The biomass fuels were wood biomass (pellets) and agriculture biomass (oat). The sewage sludge came from waste water treatment plant. The biomass and sludge percentage in blends with coal were 10 %. The studied materials were characterised in terms of their proximate and ultimate analysis and calorific value. The composition of the ash of the studied fuels was also carried out. The behaviour of studied fuels was investigated by thermogravimetric analysis (TG, DTG and DTA). The samples were heated from an ambient temperature up to 1,000 °C at a constant three rates: 10, 40 and 100 °C min^?1 in 40 mL min^?1 air flow. TG, DTG and DTA analysis showed differences between coal, biomass fuels and sewage sludge. 10 % addition of studied fuels to the mixture with coal changed its combustion profile in the case of sewage sludge addition. The combustion characteristics of fuel mixtures showed, respectively, qualitative summarise behaviour based on single fuels. Evolved gaseous products from the decomposition of studied samples were identified. This study showed that thermogravimetric analysis connected with mass spectrometry is useful techniques to investigate the combustion and co-combustion of biomass fuels, and sewage sludge, together with coal. Non-isothermal kinetic analysis was used to evaluate the Arrhenius activation energy and the pre-exponential factor. The kinetic parameters were calculated using Kissinger–Akahira–Sunose model.     

Influence of the interaction of components on the pyrolysis behavior of biomass

There has been much interest in the utilization of biomass-derived fuels as substitutes for fossil fuels in meeting renewable energy requirements to reduce CO₂ emissions. In this study, the pyrolysis characteristics of biomass have been investigated using both a thermogravimetric analyzer coupled with a Fourier-transform infrared spectrometer (TG-FTIR) and an experimental pyrolyzer. Experiments have been conducted with the three major components of biomass, i.e. hemicellulose, cellulose, and lignin, and with four mixed biomass samples comprising different proportions of these. Product distributions in terms of char, bio-oil, and permanent gas are given, and the compositions of the bio-oil and gaseous products have been analysed by gas chromatography-mass spectrometry (GC-MS) and gas chromatography (GC). The TG results show that the thermal decomposition of levoglucosan is extended over a wider temperature range according to the interaction of hemicellulose or lignin upon the pyrolysis of cellulose; the formation of 2-furfural and acetic acid is enhanced by the presence of cellulose and lignin in the range 350-500 °C; and the amount of phenol, 2,6-dimethoxy is enhanced by the integrated influence of cellulose and hemicellulose. The components do not act independently during pyrolysis; the experimental results have shown that the interaction of cellulose and hemicellulose strongly promotes the formation of 2, 5-diethoxytetrahydrofuran and inhibits the formation of altrose and levoglucosan, while the presence of cellulose enhances the formation of hemicellulose-derived acetic acid and 2-furfural. Pyrolysis characteristics of biomass cannot be predicted through its composition in the main components.     

Comparative Analysis of Herbaceous and Woody Cell Wall Digestibility by Pathogenic Fungi

Fungal pathogens have evolved combinations of plant cell-wall-degrading enzymes (PCWDEs) to deconstruct host plant cell walls (PCWs). An understanding of this process is hoped to create a basis for improving plant biomass conversion efficiency into sustainable biofuels and bioproducts. Here, an approach integrating enzyme activity assay, biomass pretreatment, field emission scanning electron microscopy (FESEM), and genomic analysis of PCWDEs were applied to examine digestibility or degradability of selected woody and herbaceous biomass by pathogenic fungi. Preferred hydrolysis of apple tree branch, rapeseed straw, or wheat straw were observed by the apple-tree-specific pathogen Valsa mali, the rapeseed pathogen Sclerotinia sclerotiorum, and the wheat pathogen Rhizoctonia cerealis, respectively. Delignification by peracetic acid (PAA) pretreatment increased PCW digestibility, and the increase was generally more profound with non-host than host PCW substrates. Hemicellulase pretreatment slightly reduced or had no effect on hemicellulose content in the PCW substrates tested; however, the pretreatment significantly changed hydrolytic preferences of the selected pathogens, indicating a role of hemicellulose branching in PCW digestibility. Cellulose organization appears to also impact digestibility of host PCWs, as reflected by differences in cellulose microfibril organization in woody and herbaceous PCWs and variation in cellulose-binding domain organization in cellulases of pathogenic fungi, which is known to influence enzyme access to cellulose. Taken together, this study highlighted the importance of chemical structure of both hemicelluloses and cellulose in host PCW digestibility by fungal pathogens.     

Growth and Cellulolytic Properties of Three Strains of Mesophilic Cellulolytic Bacteria (Cellulomonas sp.,Clostridium cellulolyticum,New Isolate Strain R. T.)

Parameters of growth on cellulose and soluble carbohydrates and production of CMCase were determined for three strains of mesophilic cellulolytic bacteria from various origins: a sugar cane field forCellulomonas sp., decayed grass forClostridium cellulolyticum, and sewage sludge for the new isolate (Gram +, non-spore-forming rod). These strains presented different physiological behaviors.Cellulomonas sp. was a facultative anaerobe, C.cellulolyticum was a strict anaerobe, and the new isolate was anaerobic-aerotolerant. Kinetics of cellulose degradation clearly showed that cellulose structure was a limiting factor in cellulolysis by single cultures. Coculture ofCellulomonas andClostridium was carried out under anerobic conditions and compared with culture of the respective pure strains. Although an inhibition ofCellulomonas growth was observed in coculture, an improved cellulolytic activity was measured: the highest digestion of cellulose was correlated with higher production of soluble sugars, with glucose a significant component.     

Influence of Pyrolytic Biochar on Settleability and Denitrification of Activated Sludge Process

Biochar is a massively produced by-product of biomass pyrolysis to obtain renewable energy and has not been fully used.Incomplete separation of sludge and effluent and insufficient denitrification of sewage are two of main factors that influence the efficiency of activated sludge process.In this work,we proposed a new utilization of biochar and investigated the effect of biochar addition on the performance of settleability and denitrification of activated sludge.Results show that the addition of biochar can improve the settleability of activated sludge by changing the physicochemical characteristics of sludge (e.g.,flocculating ability,zeta-potential,hydrophobicity,and extracellular polymeric substances constituents).Moreover,the dissolved organic carbon released from biochar obtained at lower pyrolysis temperature can improve the nitrate removal efficiency to a certain extent.     

Identification and Quantification of Polycyclic Aromatic Hydrocarbons in Polyhydroxyalkanoates Produced from Mixed Microbial Cultures and Municipal Organic Wastes at Pilot Scale

Polyhydroxyalkanoates (PHAs) are well-known biodegradable plastics produced by various bacterial strains, whose major drawback is constituted by the high cost of their synthesis. Producing PHAs from mixed microbial cultures and employing organic wastes as a carbon source allows us to both reduce cost and valorize available renewable resources, such as food waste and sewage sludge. However, different types of pollutants, originally contained in organic matrices, could persist into the final product, thus compromising their safety. In this work, the exploitation of municipal wastes for PHA production is evaluated from the environmental and health safety aspect by determining the presence of polycyclic aromatic hydrocarbons (PAHs) in both commercial and waste-based PHA samples. Quantification of PAHs by gas chromatography-mass spectrometry on 24 PHA samples obtained in different conditions showed very low contamination levels, in the range of ppb to a few ppm. Moreover, the contaminant content seems to be dependent on the type of PHA stabilization and extraction, but independent from the type of feedstock. Commercial PHA derived from crops, selected for comparison, showed PAH content comparable to that detected in PHAs derived from organic fraction of municipal solid waste. Although there is no specific regulation on PAH maximum levels in PHAs, detected concentrations were consistently lower than threshold limit values set by regulation and guidelines for similar materials and/or applications. This suggests that the use of organic waste as substrate for PHA production is safe for both the human health and the environment.     

Thermal characterization of anaerobic sludges from wastewater treatments applied to biological generation of H<Subscript>2</Subscript>

A wide variety of organic residues may be used as energy source such as anaerobic sludge from wastewater treatment systems. However, due to inherent differences in composition, the proper characterization of these biomasses is essential to support their reuse through any conversion process. The aim of this study was the employment of thermal analysis techniques (TG/DTG and DTA) to perform the characterization of anaerobic sludges from different wastewater treatment plants (industrial and municipal), which were further applied for biological production of H₂. The different profiles observed through thermal characterization support the application of these residues as inocula, confirming their potential for H₂ production, while demonstrating the main causes for the different yields obtained (mol H₂ mol^?1 sucrose): 0.9 from sludge of brewery industry and 2.0 from sludge of municipal wastewater treatment plant, corresponding to the overall yields of 10.8 and 25%, respectively. These results confirm the versatility of thermal analysis techniques for biomass characterization, focused on its application for power generation. It is urgent to adopt more sustainable and cost-effective solutions for their management, considering a large amount of residues daily generated in both treatment processes addressed; therefore, biohydrogen production by anaerobic digestion may be a promising alternative for the reuse of both residues as it promotes their transformation from costly and potentially polluting waste into clean and renewable energy sources. The development of this anaerobic process is even more attractive in countries as Brazil, where the weather conditions are naturally favorable.     

Effect of sludge pH and treatment time on the electrokinetic removal of aluminum from water potabilization treatment sludge

Algerian's municipal sewage treatment plants generate around 10⁶ m³ of sewage sludge annually. Recently, rapid expansion of wastewater treatment plants without equal attention to the treatment of the produced sludge has generated increasing concerns. While the sludge is usually incinerated or used as an agricultural fertilizer and may contain numerous nutrients, there may also be harmful substances that complicate sludge management. Hence the removal of pollutants from the sludge is necessary before further usage. This paper discusses the characteristics of potable water treatment sludge containing a high aluminum content. Furthermore, an electrokinetic treatment is proposed to remove aluminum from this sludge by varying the type of solution contained in the cathode compartment and modifying the treatment time to optimize the efficiency of the process. Successful results were achieved where 60% of aluminum was collected on the cathode side with a consumed energy around of 1000–2000 kWh kg⁻¹ of sludge weight.     

Effect of chip size on steam explosion pretreatment of softwood

Although considerable progress has been made in technology for converting lignocellulosic biomass into ethanol, substantial opportunities still exist toreduce production costs. In biomass pretreatment, reducing milling power is a technological improvement that will substantially lower production costs for ethanol. Improving sugar yield from hemicellulose hydrolysis would also reduce ethanol production costs. Thus, it would be desirable to test innovative pretreatment conditions to improve the economics by reducing electrical power of the milling stage and by optimizing pretreatment recovery of hemicellulose, as well as to enhance cellulose hydrolysis. The objective of this study was to evaluate the effect of chip size (2–5, 5–8, and 8–12 mm) on steam-explosion pretreatment (190 and 210°C, 4 and 8 min) of softwood (Pinus pinater).     

Pretreatment of Reed by Wet Oxidation and Subsequent Utilization of the Pretreated Fibers for Ethanol Production

Common reed (Phragmites australis) is often recognized as a promising source of renewable energy. However, it is among the least characterized crops from the bioethanol perspective. Although one third of reed dry matter is cellulose, without pretreatment, it resists enzymatic hydrolysis like lignocelluloses usually do. In the present study, wet oxidation was investigated as the pretreatment method to enhance the enzymatic digestibility of reed cellulose to soluble sugars and thus improve the convertibility of reed to ethanol. The most effective treatment increased the digestibility of reed cellulose by cellulases more than three times compared to the untreated control. During this wet oxidation, 51.7% of the hemicellulose and 58.3% of the lignin were solubilized, whereas 87.1% of the cellulose remained in the solids. After enzymatic hydrolysis of pretreated fibers from the same treatment, the conversion of cellulose to glucose was 82.4%. Simultaneous saccharification and fermentation of pretreated solids resulted in a final ethanol concentration as high as 8.7 g/L, yielding 73% of the theoretical.     

Mathematical Tool from Corn Stover TGA to Determine Its Composition

Corn stover was treated by steam explosion process at four different temperatures. A fraction of the four exploded matters was extracted by water. The eight samples (four from steam explosion and four from water extraction of exploded matters) were analysed by wet chemical way to quantify the amount of cellulose, hemicellulose and lignin. Thermogravimetric analysis in air atmosphere was executed on the eight samples. A mathematical tool was developed, using TGA data, to determine the composition of corn stover in terms of cellulose, hemicellulose and lignin. It uses the biomass degradation temperature as multiple linear function of the cellulose, hemicellulose and lignin content of the biomass with interactive terms. The mathematical tool predicted cellulose, hemicellulose and lignin contents with average absolute errors of 1.69, 5.59 and 0.74?%, respectively, compared to the wet chemical method.     

Influence of feed characteristics on the microwave-assisted pyrolysis used to produce syngas from biomass wastes

A series of biomass wastes (sewage sludges, coffee hulls and glycerol) were subjected to pyrolysis experiments under conventional and microwave heating. The influence of the initial characteristics of the raw materials upon syngas production was studied. Glycerol yielded the highest concentration of syngas, but the lowest H₂/CO ratio, whereas sewage sludges produced the lowest syngas production with the highest H₂/CO molar ratio. Coffee hull displayed intermediate values for both parameters. Microwave heating produced greater gas yields with elevated syngas content than conventional pyrolysis. Moreover, microwave pyrolysis always achieved the desired effect with temperature increase upon the pyrolysis products, whatever biomass material was employed. This could be due to the hot spot phenomenon, which only occurs under microwave heating. In addition, a comparison of the energy consumption of the traditional and microwave-assisted pyrolysis is also presented. Results point at microwave system as less time and energy consuming in comparison to conventional system.     

施用污泥对黑麦草生长及重金属含量的影响

采用单因素随机区组试验的方法,研究了金华市污水厂污泥堆肥对黑麦草生长和对重金属的吸收及富集的影响。结果表明,施用量以1kg／m^2和2kg／m^2的两个处理为宜,当年的产草量比对照分别增加了22．6％和27．8％;施用污泥黑麦草植株地上部组织重金属元素Pb、Cd和Cu的含量与对照相比无显著差异,Zn的积累量增多,重金属含量均未超过植物中的平均含量,施用污泥未对黑麦草造成重金属污染。