Influence of Changing the Remote Substituents on Charge Transfer Properties of Cyanide-Bridged Trinuclear Fe−Ru−Fe Complexes

To investigate the effect of ligand remote (>10 Å) substituents on the bridging metal center on the metal-to-metal charge transfer (MMCT) properties in cyanidometa-bridged complexes, a series of new cyanidometal-bridged complexes and their one-electron and two-electron oxidation products have been synthesized and well characterized (namely, trans-[Cp(dppe)Fe−NC−(L)Ru(PPh₃)−CN−Fe(dppe)Cp][PF₆]_n (n=2, 3, 4) (L=dmptpy, 1[PF₆]_n ; L=meoptpy, 2[PF₆]_n ; L=t-Buptpy, 3[PF₆]_n ) (Cp=1,3-cyclopentadiene, dppe=1,2-bis(diphenylphosphino)ethane, PPh₃=triphenylphosphine, dmptpy=4′-(4-dimethylaminophenyl)-2,2′,6′,2′′-terpyridine, meoptpy=4′-(4-methoxyphenyl)-2,2′,6′,2′′-terpyridine, t-Buptpy=4′-(4-tertbutylphenyl)-2,2′,6′,2′′-terpyridine)). The investigations suggest that the cyanido-stretching (ν_CN) vibration energy for the complexes is unsensitive to the electron-donating ability change of the remote substituents of the cyanidometal bridging auxiliary ligand from tertbutyl, methoxy to dimethylamino group. However, the MMCT energies of the one- and two-electron oxidation complexes are still sensitive to the remote substituents of the ligand on the bridging metal center, and decreases with the increase of the electron-donating ability of the remote substituents from tertbutyl, methoxy to dimethylamino group. All one-electron and two-electron oxidation products belong to Class II mixed valence compounds according to the classification of Robin and Day.     

Influence of Fine Ligand Substitution Modification of the Isocyanidometal Bridge on Metal-to-Metal Charge Transfer Properties in Class II–III Mixed Valence Complexes

The synthesis and characterization of Class II–III mixed valence complexes have been an interesting topic due to their special intermediate behaviour between localized and delocalized mixed valence complexes. To investigate the influence of the isocyanidometal bridge on metal-to-metal charge transfer (MMCT) properties, a family of new isocyanidometal-bridged complexes and their one-electron oxidation products cis-[Cp(dppe)Fe−CN−Ru(L)₂-NC−Fe(dppe)Cp][PF₆]_n (n=2, 3) (Cp=1,3-cyclopentadiene, dppe=1,2-bis(diphenylphosphino)ethane, L=2,2’-bipyridine (bpy, 1[PF₆]_n ), 5,5’-dimethyl-2,2’-bipyridyl (5,5’-dmbpy, 2[PF₆]_n ) and 4,4’-dimethyl-2,2’-bipyridyl (4,4’-dmbpy, 3[PF₆]_n )) have been synthesized and fully characterized. The experimental results suggest that all the one-electron oxidation products may belong to Class II–III mixed valence complexes, supported by TDDFT calculations. With the change of the substituents of the bipyridyl ligand on the Ru centre from H, 5,5’-dimethyl to 4,4’-dimethyl, the energy of MMCT for the one-electron oxidation complexes changes in the order: 1³⁺ < 2³⁺ < 3³⁺ , and that for the two-electron oxidation complexes decreases in the order 1⁴⁺ > 3⁴⁺ > 2⁴⁺ . The potential splitting (ΔE_1/2(2)) between the two terminal Fe centres for N[PF₆]₂ are the largest potential splitting for the cyanido-bridged complexes reported so far. This work shows that the smaller potential difference between the bridging and the terminal metal centres would result in the more delocalized mixed valence complex.     

Synthesis and Characterization of Nitrato-Triamine-Metal(II) Complexes. Conglomerate Crystallization Part 55. Crystal Structure of [Ni(dien)(O2NO)(ONO2)] (I), {[Cu(dien)-(μ-ONO2)]NO3}∞ (II), [Zn(dien)(O2NO)(ONO2)] (III), [Ni(Medpt)(O2NO)(ONO2)] (IV) and [Cu(Medpt)(ONO2)2] (V)

In absolute ethanol and in the presence of triethylorthoformate, reactions of metal(II) nitrates with linear tridentate amines afforded metal complexes of the formula M(NNN)(NO₃)₂, where M = Ni²⁺, Cu²⁺ and Zn²⁺, and NNN = dien and Medpt. The compounds fall into three categories in accordance with their stereochemistry and mode of binding of the nitrato ligands. Compounds I, [Ni(dien)(O₂NO)(ONO₂)] and III, [Zn(dien)(O₂NO)(ONO₂)] are isomorphous and isostructural. They crystallize in the monoclinic space group P2₁/n with nearly identical cell constants. The stereochemistry of these two compounds is such that the terdentate dien ligand forms a fac MN₃ moiety with the two oxygens of the bidentate nitrato ligand trans to the terminal NH₂. These ligands form the base of the octahedral arrangement in which the sixth position, trans to the secondary nitrogen of the dien, is an oxygen of the monodentate nitrato ligand. Compound IV, [Ni(Medpt)(O₂NO)(ONO₂)] falls into the same category as I and III despite the fact that the two rings in the Ni-Medpt moiety are six-membered rings, unlike those in compounds I and III which are five-membered rings. Nevertheless, the nickel-amine arrangement is fac. The bidentate nitrato-oxygens are trans to the terminal NH₂ of the amine ligand, and the oxygen of the monodentate nitrato ligand is trans to the tertiary amine-nitrogen. Such stereochemistry is prevalent for nickel and zinc compounds. Interestingly, compound IV crystallizes as a conglomerate (space group P2₁2₁2₁). Compound II, {[Cu(dien)(μ-ONO₂)]NO₃}_∞ belongs to the second category and has a polymeric structure. The repeating fragment in the polymeric chain is a Cu(dien)-O fragment with the monodentate nitrato ligand occupying an equatorial position of the base. A second oxygen of the equatorial nitrate becomes an axial ligand for an adjacent Cu-N₃O fragment. In this way the substance propagates into an infinite chain. The repeating unit has an effective square pyramidal, five-coordinate, configuration. Finally, the compound crystallizes as a racemate. The second nitrate necessary for charge compensation of this copper(II) compound is ionic and its function is to hold the infinite chains of the lattice. The third category represented by compound V, [Cu(Medpt)(ONO₂)₂] contains two molecules in the asymmetric unit of the racemic lattice (monoclinic, space group P2₁/a). The structure of Cu-Medpt is unlike that of IV in that both species present in the asymmetric unit have the amine ligand in a mer configuration which together with a monodentate oxygen of a nitrato ligand form a base plane of a square pyramid. The fifth ligand of both Cu²⁺ ions is a second monodentate nitrato ligand. The stereochemical differences between the two Cu²⁺ ions are insignificant for the Cu-Medpt fragment, which share the same conformation and configuration. The major difference between the two species is the torsional angles defined by the Cu-O-N-O angles. The difference arises from variation in the hydrogens of the primary amine moieties selected by nitrato-oxygens to form intramolecular hydrogen bonds. Finally, there is a little variation in the equatorial Cu-ONO₂ stereochemistry because of steric hindrance, imposed by the Medpt, preventing large torsional angles by these nitrato ligands. This is evident by comparing the two copper species shown in Finally, nitrate-to-Br ligand exchange was found to take place when KBr pellets are prepared for IR spectral measurements.     

Heterometallic Werner complexes as energetic materials

New heterometallic Werner complexes have been synthesized by combining the cobalt cationic [Co(NH3)6]3+ species with a nitrato metal fragment [M(NO3)4](x-) (M = Fe, Mn, Cu, Zn) or with metal oxides X2MO4 (M = Mo, W and X = Na, NH4). Depending on the metals, an organic and/or a water synthetic route was developed. X-Ray data on Mn and Cu precursors have shown the versatility of nitrate ligand coordination. TDA-TGA studies have been performed to demonstrate the energetic material character. The [Co(NH3)6]x[M(NO3)4]3 complexes display a good oxygen balance and, as shown by standard sensitivity tests, are suitable for automotive applications.     

Synthesis, Characterization and Crystal Structure of the First Tri-nuclear MFe2（M = Cu and Ni） Complexes Based on Nitroprusside

IntroductionSince 184 8,whenPlayfairpublishedthefirstpaperrelatedtonitroprussides ,1thetransitionmetalpenta cyanonitrosylmetallatehydrateshavebeenwidelystudiedbecauseoftheirimportantrolesinmolecularsieves ,cationexchangers,electronscavengersandradionuclidesor bents .2 4 Thenitroprussides ,regardlessofthecationicmetal,arecurrentlyemployedasreversibleinhibitorsofagroupofenzymesknownassuperoxidedismutases .5Recently ,using [Fe(CN ) 5(NO) ]2 - asabuildingblock ,somenitroprusside bridgedpolymeri…     

Zur reaktion von metall-koordiniertem kohlenmonoxid mit yliden: XI. Einige neuartige η1-vinyl-komplexe des eisens durch deprotonierung kationischer carbenkomplexe mit trimethyl(methylen)phosphoran

Novel η¹-vinyl complexes of the type Cp(CO)(L)FeC(OMe)C(R)R′ (R = R′ = H, Me; R = H, R′ = Me; L = Me₃P, Ph₃P) are obtainied via methylation of the acyl complexes Cp(CO)(L)FeC(O)R (R = Me, Et, i-Pr) with MeOSO₂F and subsequent deprotonation of the resulting carbene complexes [Cp(CO)(L)FeC(OMe)R]SO₃F with the phosphorus ylide Me₃PCH₂. The same procedure can be applied for the synthesis of the pentamethylcyclopentadienyl derivative C₅Me₅(CO)(Me₃P)FeC(OMe)CH₂, while treatment of the hydroxy or siloxy carbene complexes [Cp(CO)(L)FeC(OR)Me]X (R = H, Me₃Si; X = SO₃CF₃) with Me₃CH₂ results in the transfer of the oxygen bound electrophile to the ylidic carbon. Some remarkable spectroscopic properties of the new complexes are reported.     

Nickel(II) and copper(II) complexes of 2,5-dimethyl-1,3,4-thiadiazole

Summary Nickel(II) and copper(II) complexes of 2,5-dimethyl-1,3,4-thiadiazole Ni(DTZ)X₂ (X = Cl or Br) and M(DTZ)₂X₂ (M = Ni, X = 1 or N03; M = Cu, X = Cl, Br or NO₃) have been prepared. The i.r. spectra show that in all the complexes the ligand is N,N- or N-bonded to the metal while the sulfur atom does not participate in coordination, and that the halide ions are coordinated forming terminal M-X bonds. The NO ₃ ^- group is coordinated in both the nitrato complexes. Magnetic moments of 3.07–3.29 B.M. for the nickel(II) and 1.86–1.92 B.M. for the copper(II) complexes were observed. The Ni(DTZ)X₂ complexes have a pseudo-tetrahedral [N₂X₂] coordination with N,N-bridging ligand molecules. The Ni(DTZ)₂X₂ and Cu(DTZ)₂X₂ complexes, with predominantly monodentate ligand, involve six-coordinate metal atoms with strong equatorial [N₂X₂] bonds and weaker axial bonds.Author to whom all correspondence should be directed.     

Ruthenium(III) tetradentate Schiff-base complexes: spectral,catalytic, and its biocidal efficacy

New six-coordinate ruthenium(III) Schiff-base complexes of general formula [Ru(X)(PPh₃)(L)] (where X = Cl/Br and L = mononucleating bibasic tetradentate ligand derived by condensing actetoacetanilide/acetoacetotoludide with o-aminophenol/o-aminothiophenol/o-aminobenzoic acid in 1 : 2 molar ratio in ethanol) have been synthesized and characterized by physico-chemical and spectroscopic methods. The new ruthenium(III) complexes possess 2NO/2NS metal binding sites and are catalysts for the oxidation of alcohols using molecular oxygen as co-oxidant and in C–C coupling reactions. These complexes possess good biocidal (antibacterial and antifungal) activity.     

Hexamethylphosphoramide as Analytical Reagent: Simultaneous Determination of Cobalt,Iron and Nickel

Abstract

Hexamethylphosphoramide (HMPA) gives, in aqueous solutions in the presence of SCN^? ions, complexes with many metal ions, which absorb in the visible region of spectrum. The spectra have been studied in function of ligand concentration and pH for Co, Ni and Fe complexes. For the Co complex an equation was found that describes the behaviour of the absorption vs. SCN^? and HMPA concentration. Absorption follows Lambert-Beer law and can be used for analytical determinations. Analysis of solutions containing Ni and Co in various ratios of concentration has been performed and results are discussed. Co, Ni and Fe content of an alloy has been measured by this way.     

Ab initio and DFT study of the electronic structures and spectroscopic properties of pyrene ligands and their cyclometalated complexes

Two ligands 1‐diphenylphosphinopyrene (1‐PyP) ( L ₁ ), 1,6‐bis(diphenylphosphino)‐pyrene (1,6‐PyP) ( L ₂ ) and their cyclometalated complexes [Pt(dppm)(1‐PyP‐H)]⁺ ( 1 ), [Pt₂(dppm)₂(1,6‐PyP‐H₂)]²⁺ (dppm = bis(diphenylphosphino)methane ( 2 ), and [Pd(dppe)(1‐PyP‐H)⁺ (dppe = bis(diphenylphosphino)ethane) ( 3 ) are investigated theoretically to explore their electronic structures and spectroscopic properties. The ground‐ and excited‐state structures are optimized by the density functional theory (DFT) and single‐excitation configuration interaction method, respectively. At the time‐dependent DFT (TDDFT) and B3LYP level, the absorption and emission spectra in solution are obtained. As revealed from the calculations, the lowest‐energy absorptions of 1 and 3 are attributed to the mixing ligand‐to‐metal charge transfer (CT)/intraligand (IL)/ligand‐to‐ligand CT transitions, while that of 2 is attributed to the IL transition. The lowest‐energy phosphorescent emissions of the cyclometalated complexes are attributed to coming from the ³ILCT transitions. With the increase of the spin‐orbit coupling effect, the phosphorescence intensities and the emissions wavelength are correspondingly increased. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Iron(III) complexes with benzoxazole derivatives

Summary Iron(III) complexes of the general formula Fe(L)_nX₃·mH₂O, where L=benzoxazole(benzox), 2-methylbenzoxazole(2-Mebenzox), 2, 5-dimethylbenzoxazole(2, 5-diMebenzox); n=2, 3, 4, 6; X=Cl, Br, NO₃ or ClO₄; m=0, 1, 2, 5, have been prepared and studied by chemical analysis, magnetic moments, i.r., electronic, Mössbauer spectra and molar conductivity values.The oxazoles are N_ring bonded and the complexes are hexacoordinate in the solid state with exception of the five-coordinate Fe(2, 5-diMebenzox)₂Br₃.     

Spectral and electrochemical investigation of 1,8-diaminonaphthalene upon encapsulation of p-sulfonatocalix[4]arene

The ligand salt, Me₆[14]diene·2HClO₄ (L·2HClO₄) was prepared by condensation of acetone and ethylene diamine in the presence of perchloric acid. On reduction of this diene ligand salt, L·2HClO₄ with sodium borohydride, the two isomeric ligands, ‘tet-a’ and ‘tet-b’ were produced. The ligands, on reaction with ZnX₂ (X=Cl, ClO₄, NO₃ or CH₃COO) and ZnSO₄ produced the corresponding complexes. These complexes have been characterized on the basis of elemental analyses; IR, UV–Vis and ¹H-NMR spectroscopies; magnetic and conductance data. Based on these data, all of the complexes of the diene ligand L, as well as the perchlorate complexes of all of the ligands attained a square-pyramidal arrangement, whereas the complexes of ‘tet-a’ and ‘tet-b’, with X=NO₃, Cl or CH₃COO and with ZnSO₄ salt, were octahedral. Moreover, all complexes were monometallic except the nitrato complex, [(ZnL)₂(µ-NO₃)](ClO₄)₃ which is bimetallic. The structure of [(ZnL)₂(µ-NO₃)](ClO₄)₃ has been confirmed by X-ray crystallography. In this complex the zinc centres lie within a N₄O donor set, with the four nitrogen donors from L and one of the oxygen atom stemming from the bridging NO₃. The complexes show different electrolytic behavior in different solvents. The antibacterial activities of the ligands and complexes towards different phytopathogenic bacteria have been investigated.     

Crystal and molecular structures of (η-xanthene)- (η-cyclopentadienyl)iron(II) hexafluorophosphate and (η-2-methylthianthrene)(η-cyclopentadienyl)iron(II) hexafluorophosphate

The neutral complexes (η⁵-C₅H₅NiXL (X = Cl, L = PPh₃ (I); L = PCy₃ (II); X = Br, L = PPh₃ (III); L = PCy₃ (IV); X = I, L = PPh₃ (V); L = PCy₃ (VI)) have been obtained by treating NiX₂L₂ with thallium cyclopentadienide. The same reaction in the presence of TlBF₄ gives cationic derivatives [(η⁵-C₅H₅)NiL₂]BF₄ (L = 2PPh₂Me (VII); L = dppe (VIII)), whereas mononuclear complexes containing two different ligands (L₂ = PPh₃ + PCy₃ (IX)) or dinuclear [(η⁵-C₅H₅)Ni(PPh₃)]₂dppe(BF₄)₂ (X) are obtained from the reaction of III with TlBF₄ in the presence of a different ligand. Reduction of cationic complexes with Na/Hg gives very unstable nickel(I) derivatives (η⁵-C₅H₅)NiL₂, which could not be isolated purely. Similar reduction of neutral complexes under CO gives a mixture of decomposition products containing [(η⁵-C₅H₅)Ni(CO)]₂ and nickel(o) carbonyls, whereas in the presence of acetylenes, dinuclear [(η⁵-C₅H₅)Ni]₂(RCCR′) (R = R′ = Ph; R = Ph, R′ = H) are obtained.     

On the Reaction of [(CO)3Fe(μ‐Me2NCO)2Fe(CO)2(NHMe2)] with Chelating Ligands — X‐Ray Structures of New Binuclear μ‐Carbamoyl Complexes

Reaction of the binuclear μ‐carbamoyl complex [(CO)₃Fe(μ‐Me₂NCO)₂Fe(CO)₂(HNMe₂)] ( 1 ) in toluene with the chelating ligands Ph₂PCH₂PPh₂ (dppm) and Ph₂PCH₂CH₂PPh₂ (dppe) gives different results. With dppm only the complex [(CO)₃Fe(μ‐Me₂NCO)₂Fe(CO)₂(dppm)] ( 3 ) with a dangling ligand is obtained under replacement of amine, whereas with dppe depending on the reaction conditions up to three compounds are found. A 1 : 1 mixture of the educts generates the related complex [(CO)₃Fe(μ‐Me₂NCO)₂Fe(CO)₂(dppe)] ( 4 ) together with the tetranuclear complex [{(CO)₃Fe(μ‐Me₂NCO)₂Fe(CO)₂}₂(dppe)] (5 ). 4 slowly converts into [(CO)₃Fe(μ‐Me₂NCO)₂Fe(CO)(dppe)] ( 6 ) with dppe acting as a chelating ligand. 6 is the first compound in this series in which one of the five CO groups is replaced by another donor. A 2 : 1 molar ratio of 1 and dppe quantitatively produces 5 . Addition of CO to a solution of 6 proceeds under slow reversible conversion of the complex into 4 . The compounds were characterized by the usual spectroscopic methods; 3 , 5 and 6 were also studied by X‐ray diffraction analyses.     

Iron(II) and Iron(III) Perchlorate Complexes of Ciprofloxacin and Norfloxacin

The reactions of ciprofloxacin (CIP) and norfloxacin (NOR) with iron(II) and iron(III) perchlorate have been investigated. The optical spectra support the formation of four complexes for each oxidation state with 1 : 1, 1 : 2, 1 : 3 and 1 : 4 metal to ligand molar ratios. The electrical conductivity and magnetic susceptibility measurements show that the isolated complexes are high spin and the Fe(ClO 4 ) 2 and Fe(ClO 4 ) 3 complexes behave as 1 : 2 and 1 : 3 electrolytes, respectively. The IR spectra indicate that CIP and NOR bind to the iron ion as bidentate ligands through the carbonyl oxygen atom and one of the oxygen atoms of the carboxylate group.     

Spin Crossover in a Family of Iron(II) Complexes with Hexadentate ligands: Ligand Strain as a Factor Determining the Transition Temperature

This paper reports the synthesis of a family of mononuclear complexes [Fe(L)]X₂ (X=BF₄, PF₆, ClO₄) with hexadentate ligands L=Hpy-DAPP ({bis[N-(2-pyridylmethyl)-3-aminopropyl](2-pyridylmethyl)amine}), Hpy-EPPA ({[N-(2-pyridylmethyl)-3-aminopropyl][N-(2-pyridylmethyl)-2-aminoethyl](2-pyridylmethyl)amine}) and Hpy-DEPA ({bis[N-(2-pyridylmethyl)-2-aminoethyl](2-pyridylmethyl)amine}). The systematic change of the length of amino-aliphatic chains in these ligands results in chelate rings of different size: two six-membered rings for Hpy-DAPP, one five- and one six-membered rings for Hpy-EPPA, and two five-membered rings for Hpy-DEPA. The X-ray analysis of three low-spin complexes [Fe(L)](BF₄)₂ revealed similarities in their molecular and crystal structures. The magnetic measurements have shown that all synthesized complexes display spin-crossover behavior. The spin-transition temperature increases upon the change from six-membered to five-membered chelate rings, clearly demonstrating the role of the ligand strain. This effect does not depend on the nature of the counter ion. We discuss the structural features accountable for the strain effect on the spin-transition temperature.     

O-Tolyldithiocarbonate Complexes of Iron(II) and Iron(III)

Abstract

Reactions of O-tolyldithiocarbonate ligands, (o-, m-, and p-CH₃C₆H₄O)CS₂Na, with anhydrous FeCl₂ (1:2 molar ratio) and with FeCl₃ (1:1 and 1:3 molar ratio) yielded the complexes [{(CreO)CS₂}₂Fe] and [{(CreO)CS₂}_nFeCl_3–n] (Cre = o-, m-, and p-CH₃C₆H₄; n = 1 and 3), respectively. These complexes were reacted with nitrogen and phosphorus donor ligands in dichloromethane, which afforded the adducts corresponded to [{(CreO)CS₂}₂Fe.xL] and [(CreO)CS₂FeCl₂.xL] {x = 1, L = N₂C₁₂H₈; x = 2, L = NC₅H₅, P(C₆H₅)₃}. Elemental analyses and IR, UV-visible, and mass spectroscopic and magnetic studies indicated bidentate mode of bonding by dithiocarbonate ligands leading to sixcoordination around the iron atom as a consequence of Fe…Fe interaction in the complexes [{(CreO)CS₂}₂Fe] and [(CreO)CS₂FeCl₂]. The complexes exhibited antifungal activity. The fungicidal activity of the complexes has been tested by poisoned food technique using fungi Fusarium sp.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental resource: Antifungal Activity.     

Syntheses,crystal structures,and electrochemical characterizations of two octahedral iron(III) complexes with Schiff base of pyridoxal and aminoguanidine

This article presents the synthesis, physico-chemical, in particular voltammetric, characteristics of two iron(III) complexes with pyridoxal aminoguanidine (PLAG), [Fe(PLAG)Cl₂(H₂O)]Cl (1) and [Fe(PLAG)₂](NO₃)₃ (2). As expected, the zwitterion of the chelate ligand is coordinated tridentate through oxygen of phenol and nitrogen atoms of azomethine and imino groups of the aminoguanidine fragment. In both complexes, Fe(III) is distorted octahedral. [Fe(PLAG)₂](NO₃)₃ (2) is the first bis(ligand) complex with this ligand. Cyclic voltammetric characteristics of the ligand and complexes were studied in DMF in the presence of TBAP or LiCl as supporting electrolytes. The complexes are unstable in this solvent, especially in the presence of an excess of chloride, thus forming several reducible species whose stabilities and behaviors were characterized.     

Reaction Behavior of Decacarbonyldimetalates(2‐) (M = Cr and Mo) towards the Nitrosyl Carbonyls of Iron and Cobalt

The reaction of the nitrosyl carbonyl complexes [Fe(NO)₂(CO)₂] and [Co(NO)(CO)₃] with the decacarbonyldimetalates [M₂(CO)₁₀]^2– (M = Cr and Mo) in THF as the solvent at room temperature was investigated. Thereby a substitution of one nitrosyl ligand towards carbon monoxide was observed in each case. Both reactions afforded the known metalate complexes [Fe(NO)(CO)₃]^– and [Co(CO)₄]^–, respectively. These species were isolated as their corresponding PPN salts [PPN⁺ = bis(triphenylphosphane)iminium cation] in nearly quantitative yields. The products were unambiguously identified by their IR spectroscopic and elemental analytic data as well as by their characteristic colors and melting points.