K8[Fe(H2O)W11MnO39]/PANI/V2O5三元复合材料的制备、表征及光催化性能研究

本文运用静电自组装法合成了一种新型三元复合材料K₈[Fe(H₂O)W₁₁MnO₃₉]/PANI/V₂O₅,并采用IR、UV、XRD、XPS、SEM、氮气吸附等方法对其进行表征;然后,以龙胆紫为有机污染物进行光催化实验,对此三元复合催化剂的降解性能进行研究。结果表明:K₈[Fe(H₂O)W₁₁MnO₃₉]/PANI/V₂O₅已被成功复合,且仍然保持Keggin结构,稳定性能良好;在pH=2,龙胆紫C初=5 mg·L^-1,此催化剂用量为5 mg的条件下,其脱色率高达93.09%。可见,此复合催化剂具有优异的研究潜力和实用价值。     

An anionic In(III)-based metal-organic framework with Lewis basic sites for the selective adsorption and separation of organic cationic dyes

An In(Ⅲ)-based metal-organic framework (BUT-29) can selectively absorb cationic dyes in DMF even in the presence of other organic dyes, and has the higher adsorption capacity.     

磁性共价有机框架材料吸附甲基橙和茜素绿两种阴离子有机染料

以自制的磁性共价有机框架材料(COF)为吸附剂,采用静态吸附法研究了其对甲基橙(MO)和茜素绿(AG-25)的吸附行为。 结果表明,在25 ℃,pH值6~8的条件下,磁性COF对两种阴离子染料的的吸附量分别为997和1314 mg/g。 两种染料的吸附等温线符合Langmuir等温吸附模型,表明吸附过程为单层吸附;吸附动力学均符合准二级动力学模型,说明吸附过程以化学吸附为主。 磁性COF对水体中的阴离子染料体现出高吸附量和快速吸附的特点,具有潜在的价值。     

Mechanistic aspects of magnetic MgAlNi barium-ferrite nanocomposites enhanced adsorptive removal of an anionic dye from aqueous phase

The mechanistic aspects of improved aqueous removal of methyl orange (MO) dyes using high performance novel magnetic MgAlNi barium-ferrite (MgAlNi-BaFe) ternary double layer hydroxide (LDH) nanocomposites is reported in this study. Detailed surface characterization coupled with kinetic, equilibrium, thermodynamics and regeneration studies were undertaken under different operational conditions of temperature (298–318 K), initial concentration (20–100 mg/L), pH (2–6). The kinetic results show that MO sorption was mainly, associated with pseudo-second order and intra-particular diffusion process. The MO adsorption onto the MgAlNi-BaFe nanocomposites suggests a multi-layered sorption process that is endothermic and spontaneous in nature. The MO adsorption mechanism insight taken in cognizance of FTIR, XRD, pKa, zeta potential, the adsorbates surface functional groups and the adsorbate-adsorbent surface charges interactions suggest involvement of hydrogen bonding and n-π interactions, predominantly via physisorption process (ΔG° = −7.406 to −5.69 kJ/mol). The excellent adsorptive performance of the MgAlNi-BaFe adsorbents for removal of MO from water compared with other magnetic LDH nanocomposites was further elucidated via the MgAlNi-BaFe nanomaterials high rates of regeneration and superior performances for three successive desorption-adsorption cycles. This study demonstrates the high potentials of employing MgAlNi-BaFe nanomaterials for removal of dyes from water and wastewater.     

Characterization and Mechanism Elucidation of Dye Adsorption Using Cuprous Selenide Nanoparticles from Aqueous Solutions

The removal of cationic dyes, methylene blue(MB) and rhodamine B(RB), and anionic dyes, methyl or-ange(MO) and eosin Y(EY), from aqueous solutions by adsorption using Cu₂Se nanoparticles(Cu₂SeNPs) was studied. The effects of the initial pH values, adsorbent doses, contact time, initial dye concentrations, salt concentrations, and operation temperatures on the adsorption capacities were investigated. The adsorption process was better fitted the Langmuir equation and pseudo-second-order kinetic model, and was spontaneous and endothermic as well. The adsorption mechanism was probably based on the electrostatic interactions and π-π interactions between Cu₂SeNPs and dyes. For an adsorbent of 0.4 g/L of Cu₂SeNPs, the adsorption capacities of 23.1(MB), 22.9(RB) and 23.9(EY) mg/g were achieved, respectively, with an initial dye concentration of 10 mg/g(pH=8 for MB and pH=4 for RB and EY) and a contact time of 120 min. The removal rate of MB was still 70.4% for Cu₂SeNPs being reused in the 5th cycle. Furthermore, the recycled Cu₂SeNPs produced from selenium nanoparticles adsorbing copper were also an effective adsorbent for the removal of dyes. Cu₂SeNPs showed great potential as a new adsorbent for dyes removal due to its good stability, functionalization and reusability.     

以氧化锌为锌源的手性金属-有机骨架的合成及其用于联糠醛外消旋体的选择性吸附

通过使用氧化锌代替传统的金属无机盐为锌源,制备了手性金属-有机骨架（CMOF）[Zn（L-mal）（H₂O）₂]_n并对其手性分离性能进行了考察。将ZnO和L-苹果酸按物质的量之比1：1溶于水中,在室温下静置24 h即可得到[Zn（L-mal）（H₂O）₂]_n。以100 mg[Zn（L-mal）（H₂O）₂]_n为吸附剂,将250 μL 1 g/L的联糠醛外消旋体加入其中,并以4.5 mL异丙醇和1 mL甲醇为萃取剂和洗脱剂进行选择性吸附实验,最终滤液使用高效液相色谱仪（HPLC）进行分析。结果表明,[Zn（L-mal）（H₂O）₂]_n对R-联糠醛具有较好的选择性吸附,其对映体过量（ee）值为20%。该工作为CMOF的绿色制备提供了一定的方法和经验并拓展了其在手性分离领域的应用。     

Porous multicomponent chitosan/poly(ε-caprolactone)-block poly (ethylene glycol)/SiO2 aerogel@polydopamine membrane for Congo red adsorption

A composite adsorbent, chitosan//poly (ε-caprolactone)-block poly (ethylene glycol)/SiO₂ aerogel@polydopamine (CS/PCL-b-PEG/SA@PDA) membrane was prepared for the adsorption of organic dyes. The matrix polymer materials of this novel adsorbent were eco-friendly. SiO₂ aerogel with nanoporous network construction was fixed in the multicomponent polymer fibers through simultaneous electrospinning-electrospray technology followed by modification of polydopamine (PDA). The composite adsorbent had a maximum adsorption capacity of 598.8 mg/g for Congo red (CR) and possessed good reusability performance. This adsorbent showed excellent performance for the selective adsorption of relatively large molecule CR dyes even under high concentration of small molecule methyl orange (MO) dyes or 1 M of salt solution. The adsorption mechanism indicated that the –NH₂ and –OH groups in adsorbent could generate the stronger electrostatic attraction with the –SO₃^- groups in CR. Meanwhile, the sufficient adsorption spaces of the adsorbent were constructed by the porous network structure of SiO₂ aerogel, the accumulation of PDA particles and the porous structure of the multicomponent composite membrane. The work provided a proactive study in designing an adsorbent for the selective adsorption of organic dyes.     

Isolation of hemoglobin with metal–organic frameworks Y(BTC)(H_2O)_6

The hierarchical metal-organic frameworks(MOFs),such as Y(BTC)(H_2O)_6,are prepared with yttrium nitrate and benzene-1,3,5-tricarboxylic acid at room temperature.The product is characterized by Fourier transform infrared(FT-IR),X-ray diffraction(XRD),scanning electron microscopy(SEM)and thermogravimetric analysis(TGA).The Y(BTC)(H_2O)_6 particles are sufficiently rigid for performing solid phase extraction and they exhibit favorable selectivity toward the adsorption of hemoglobin.The adsorption behavior of hemoglobin onto the Y(BTC)(H_2O)_6 fits the Langmuir adsorption model with a theoretical adsorption capacity of 555.6 mg g 1.An adsorption efficiency of 87.7%for 100μg mL 1hemoglobin in 1 mL sample solution(at pH 6.0)is achieved with 0.40 mg Y(BTC)(H20)6.77.3%of the retained hemoglobin is readily recovered using a 0.5%(m/v)SDS solution as the stripping reagent.Circular dichroism spectra indicated that the conformation of hemoglobin is maintained during the adsorption-desorption process.The MOFs material is applied for the isolation of hemoglobin from human blood and the purity of the obtained hemoglobin is further verified by sodium dodecyl sulfate polyacrylamide gel electrophoresis(SDS-PAGE).     

Enhanced adsorption performance of a novel Fe‐Mn‐Zr metal oxide nanocomposite adsorbent for anionic dyes from binary dye mix: Response surface optimization and neural network modeling

A novel adsorbent, Fe‐Mn‐Zr metal oxide nanocomposite was synthesized and investigated for removal of methyl orange (MO) and eosin yellow (EY) dyes from binary dye solution. The magnetic nanocomposite has shown surface area of 143.01 m²/g and saturation magnetization of 15.29 emu/g. Optimization was carried out via response surface methodology (RSM) for optimizing process variables, and optimum dye removal of 99.26% and 99.55% were obtained for MO and EY dye, respectively with contact time 62 min, adsorbent dose 0.45 g/l, initial MO concentration 11.0 mg/l, and initial EY concentration 25.0 mg/l. A feed forward back propagation neural network model has shown better prediction ability than RSM model for predicting MO and EY dye removal (%). Adsorption process strictly follows Langmuir isotherm model, and enhanced adsorption capacities of 196.07 and 175.43 mg/g were observed for MO and EY dye, respectively due to synergistic effects of physicochemical properties of trimetal oxides. Surface adsorption and pore diffusions are the mechanisms involved in the adsorption as revealed from kinetic studies.     

磷钼钨杂多酸修饰金属有机骨架MOF-5复合材料吸附亚甲基蓝

采用水热合成法,在合成金属有机骨架MOF-5的过程中引入活性组分磷钼钨杂多酸(H₆P₂Mo₁₅W₃O₆₂),制备出一种新型吸附剂H₆P₂Mo₁₅W₃O₆₂/MOF-5。 利用H₆P₂Mo₁₅W₃O₆₂/MOF-5材料对亚甲基蓝溶液进行了材料的吸附性能研究,探讨了亚甲基蓝溶液的初始pH值和初始浓度以及不同吸附温度对吸附量的影响。 结果表明,在较低的温度和亚甲基蓝溶液较低的初始pH值的条件下,有利于H₆P₂Mo₁₅W₃O₆₂/MOF-5对亚甲基蓝的吸附。 实验结果能够较好地符合Langmuir吸附等温式以及二级动力学模型,对亚甲基蓝的最大吸附量可达401.6 mg/g。 热力学参数ΔG<0、ΔH<0和ΔS>0,表明H₆P₂Mo₁₅W₃O₆₂/MOF-5对亚甲基蓝的吸附过程是自发、放热的。 此外,还探讨了H₆P₂Mo₁₅W₃O₆₂/MOF-5对甲基紫、孔雀石绿、罗丹明B和甲基橙等其它染料的吸附性能,结果表明,H₆P₂Mo₁₅W₃O₆₂/MOF-5对阳离子染料有较好的吸附效果。     

Gold Nanoparticles Loaded on Activated Carbon as Novel Adsorbent for Kinetic and Isotherm Studies of Methyl Orange and Sunset Yellow Adsorption

In this research, a novel adsorbent gold nanoparticle loaded on activated carbon (Au-NP-AC) was synthesized by a low cost in a routine protocol. Subsequently, this novel material characterization and identification are followed by different techniques such as th eBruner–Emmet–Teller (BET) theory, scanning electron microcopy, and transmission electron microscopy analysis. Unique properties such as high BET surface area (>1229.55 m²/g) and low pore size (<22.46 Å) and average particle size lower than 48.798 Å in addition to high reactive atom and presence of various functional groups make it possible for efficient removal of sunset yellow (SY) and methyl orange (MO). Generally, the influence of variables including amount of adsorbent, initial dyes concentration, contact time, temperature on dyes removal percentage has great effect on removal percentage that their influence was optimized. The kinetic of proposed adsorption processes efficiently followed, pseudo-second-order and intra-particle diffusion approach. The equilibrium data of the removal strongly follow the Langmuir monolayer adsorption with high adsorption capacity in a short amount of time. This novel adsorbent by small amount (0.01 g) really is applicable for removal of high amount of both dyes (MO and SY) in short time (<18 minutes). Equilibrium data fitted well with the Langmuir model at all amount of adsorbent, while maximum adsorption capacity for MO 161.29 mg g^?1 and for SY 227.27 for 0.005 g of Au-NP-AC.     

水蒸气和α-Fe_2O_3对铈改性半焦脱除单质汞的影响研究

采用浸渍法制备了铈改性半焦吸附剂(Ce/SC),在小型固定床反应器上考察了水蒸气和α-Fe_2O_3对Ce/SC脱除Hg~0性能的影响,并利用X射线衍射、H2程序升温还原、X射线光电子能谱等分析手段对其机理进行了探究。结果表明,水蒸气会明显抑制Ce/SC对单质汞的脱除效率,原因是H_2O分子在活性组分CeO_2表面发生解离,部分晶格氧转化成Ce-OH官能团,从而导致其氧化活性的降低;α-Fe_2O_3的加入对Ce/SC的脱汞性能无显著影响;当水蒸气和α-Fe_2O_3同时存在时,Ce/SC的脱汞效率虽然有所降低,但是其降低幅度明显低于水蒸气单独作用时的情况,这主要是因为水蒸气与α-Fe_2O_3作用增加了其表面化学吸附氧的含量,提高了α-Fe_2O_3的氧化活性,促进单质汞的氧化和脱除。     

Experimental and theoretical investigations on the electric field gradient at the Br site in Sr(BrO3)2 · H2O and Ba(BrO3)2 · H2O

Single-crystal Zeeman effect studies have been done using ⁷⁹Br NQR in Sr(BrO₃)₂ · H₂O and Ba(BrO₃)₂ · H₂O and the electric field gradient (EFG) parameters at the Br site have been determined. The point-charge model for the evaluation of EFG at the Br site, when applied to these systems, has not yielded satisfactory results. In another model, the total EFG is obtained as the sum of the covalent contribution and the inter-ionic contribution. To obtain the covalent contribution CNDO/2 MO calculations have been done for the (BrO₃)⁻ ions of these systems. There is excellent agreement with the experimental values in the case of Sr(BrO₃)₂ · H₂O, while the results on Ba(BrO₃)₂ · H₂O indicate that the structural data on this crystal need refinement.     

Quartzite an efficient adsorbent for the removal of anionic and cationic dyes from aqueous solutions

Quartzite obtained from local source was investigated for the removal of anionic dye congo red (CR) and cationic dye malachite green (MG) as an adsorbent from aqueous solution in batch experiment. The adsorption process was studied as a function of dye concentration, contact time, pH and temperature. Adsorption process was described well by Langmuir and Freundlich isotherms. The adsorption capacity remained 666.7 mg/g for CR dye and 348.125 mg/g for MG dye. Data was analyzed thermodynamically, ΔH⁰ and ΔG⁰ values proved that adsorption of CR and MG is an endothermic and spontaneous process. Adsorption data fitted best in the pseudo-first order kinetic model. The adsorption data proved that quartzite exhibits the best adsorption capacity and can be utilized for the removal of anionic and cationic dyes.     

神府煤热解-活化耦合反应产物特性及机制研究

利用两段式固定床反应装置,研究了神府煤热解-活化耦合产物的特性,探讨了热解温度及活化剂(H_2O(g)、CO_2和H_2O(g)/CO_2)对产物性能的影响,揭示了热解-活化耦合反应机制。结果表明,热解温度对半焦的CO_2化学反应性影响较小;采用热解-活化两段耦合工艺,可使神府煤热解的焦油产率明显提高,产率最高为17.8%;不同活化剂对两段耦合过程产生的混合煤气(mixture coal gases,MCG)和焦油产率影响为H_2O(g)H_2O(g)/CO_2CO_2,其焦油组分均以饱和分和芳香分为主;采用H_2O(g)/CO_2(1∶1)活化剂,可有效提高活性炭的比表面积,其BET比表面积为845.37 m~2/g。热解-活化耦合机制主要为活化段产生的合成气(synthesis gases,SG)为热解段煤的加氢热解提供了氢源,丰富的氢自由基促进了煤的加氢热解反应,改变了耦合过程的产物分布和特性。     

A Layered Cationic Aluminum Oxyhydroxide as a Highly Efficient and Selective Trap for Heavy Metal Oxyanions

Cationic framework materials, especially pure inorganic cationic frameworks that can efficiently and selectively capture harmful heavy metal oxyanions from aqueous solution are highly desired yet scarcely reported. Herein, we report the discovery of a 2D cationic aluminum oxyhydroxide, JU-111, which sets a new benchmark for heavy metal oxyanion sorbents, especially for Cr^VI. Its structure was solved based on 3D electron diffraction tomography data. JU-111 shows fast sorption kinetics (ca. 20 min), high capture capacity (105.4 mg g⁻¹), and broad working pH range (3–10) toward Cr^VI oxyanions. Unlike layered double hydroxides (LDHs), which are poorly selective in the presence of CO₃²⁻, JU-111 retains excellent selectivity for Cr^VI even under a large excess of CO₃²⁻. These superior features coupled with the ultra-low cost and environmentally benign nature make JU-111 a promising candidate for toxic metal oxyanion remediation as well as other potential applications.     

基于氨基化煤基碳点的复合光催化剂的制备及对CO2还原的催化性能

采用过氧化氢氧化法剥离出煤炭结构中的晶体碳[煤基碳点(CDs)], 并通过亚硫酰氯氯化及乙二胺钝化等步骤对其进行氨基化修饰, 制得N, S共掺杂的氨基化煤基碳点(NH₂-CDs), 再利用其表面的氨基和含氧基等官能团的配位及分散作用, 将由氯化铜原位还原得到的氧化亚铜(Cu₂O)纳米粒子包覆于其中, 制备了复合催化剂Cu₂O/NH₂-CDs, 表征了其结构和形貌, 并考察了其可见光催化还原CO₂/H₂O的性能. 结果发现, NH₂-CDs的存在使复合催化剂不仅具备了较强的CO₂吸附性能, 而且还具有了高效的电子-空穴对分离和电子转移能力, 从而表现出优异的光催化还原CO₂制备HCOOH的性能. 反应6 h时, 产物HCOOH的量为2582.4 μmol/g cat, 约为同条件下纯Cu₂O作为光催化剂时产物HCOOH产率的7.3倍.     

Preparation of MnO2 Loaded Hydrothermal Carbon-coated Electrospun PAN Fiber Membranes for Highly Efficient Adsorption and Separation of Cationic Dye

Hydrothermal carbonaceous materials and MnO₂ have been proved to be promising adsorbents to remove organic dyes from wastewater. In this study, flexible MnO₂ loaded hydrothermal carbon-coated electrospun poly-acrylonitrile(AC/MnO₂/PAN) fiber membranes were fabricated by a facile one-step hydrothermal method and activated by NaOH solution. The composite fibers exhibited large adsorption capacity toward cationic dyes and excellent mechanical properties. The adsorption performance can be fitted well with pseudo-second-order model and Langmuir isotherm model. The maximum adsorption for methylene blue(MB), methyl violet(MV) and malachite green(MG) are 1173.27,1106.31 and 1129.89 mg/g, respectively, according to Langmuir fitting. The AC/MnO₂/PAN fiber membrane also showed satisfactory performances for selective adsorption and recyclability. In addition, based on selective adsorption, the AC/MnO₂/PAN fiber membranes that are repulsive to the anionic dye methyl orange(MO) can separate the MB/MO mixture solution by dynamic filtration. Thus, this work not only provides a facile strategy to fabricate large capacity adsorbents, but also demonstrates the potential applications in the dye wastewater treatment field.     

Two isostructural Ni(Ⅱ)/Co(Ⅱ)-based metal-organic frameworks for selective dye adsorption and catalytic cycloaddition of CO2 with epoxides

Two isostructu ral Ni(Ⅱ)/Co(Ⅱ)-based metal-organic frameworks(MOFs),namely {[M₃(L)₂(bpb)₃(H₂ O)₄]·2 DMF·2 H₂O}_n [M=Ni(HL-5,HL is short for Hui-Ling Liu);M=Co(HL-6);H₃ L=2',6'-dimethyl-[1,1'-biphenyl]-3,4',5-tricarboxylic acid;bpb=1,4-bis(pyrid-4-yl)benzene],have been hydrothermally synthesized and structu rally characterized.Both HL-5 and HL-6,which have the same three-interpenetrated3 D pillared-layer framework with sqc306 type topology,present good selective methyl orange(MO)adsorption over rhodamine B(RhB).Moreover,the catalytic CO₂ cycloaddition properties with epoxides of the two MOFs have also been studied at ambient pressure and temperature.     

新晶态磷酸铝分子筛CFAP-6的合成与性质

磷酸铝分子筛是新的一类晶态无机材料.1982年美国联合碳化物公司首次公布了约廿种不同结构的磷酸铝分子筛的合成专利^[1],作者在研究P₂O₅-Al₂O₃-H₂O系统的水热合成中^[2],发现用Al₂(SO₄)₃溶液作为Al₂O₃源,固体(NH₄)₃PO₄·3H₂O作为P₂O₅源,加入适量的有机胺,也能合成分子筛相,新晶态分子筛CFAP-6就是用上述原料,在二正丁胺-(NH₄)₂O-P₂O₅-Al₂O₃-H₂O系统中水热合成的。