Spectrophotometric determination of nitrite based on its catalytic effect on the oxidation of carminic acid by bromate

A highly sensitive and selective method is described for the determination of trace amounts of nitrite based on its effect on the oxidation of carminic acid with bromate. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of carminic acid at 490 nm after 3 min of mixing the reagents. The optimum reaction conditions were 1.8×10⁻¹ mol l⁻¹ H₂SO₄, 3.8×10⁻³ mol l⁻¹ KBrO₃, and 1.2×10⁻⁴ mol l⁻¹ carminic acid at 30°C. By using the recommended procedure, the calibration graph was linear from 0.2 to 14 ng ml⁻¹ of nitrite; the detection limit was 0.04 ng ml⁻¹; the R.S.D. for six replicate determinations of 6 ng ml⁻¹ was 1.7%. The method is mostly free from interference, especially from large amounts of nitrate and ammonium ions. The proposed method was applied to the determination of nitrite in rain and river water.     

Evaluation of luminol-H(2)O(2)-KIO(4) chemiluminescence system and its application to hydrogen peroxide, glucose and ascorbic acid assays

A novel chemiluminescence (CL) system was evaluated for the determination of hydrogen peroxide, glucose and ascorbic acid based on hydrogen peroxide, which has a catalytic-cooxidative effect on the oxidation of luminol by KIO(4). Hydrogen peroxide can be directly determined by luminol-KIO(4)-H(2)O(2) CL system. The detection limit was 3.0x10(-8) mol l(-1) and the calibration graph was linear over the range of 2.0x10(-7)-6.0x10(-4) mol l(-1). The relative standard deviation of H(2)O(2) was 1.1% for 2.0x10(-6) mol l(-1) (N=11). Glucose was indirectly determined through measuring the H(2)O(2) generated by the oxidation of glucose in the presence of glucose oxidase at pH 7.6. The present method provides a source for H(2)O(2), which, in turn, coupled with the luminol-KIO(4)-H(2)O(2) CL reaction system. The CL was linearly correlated with glucose concentration of 0.6-110 mug ml(-1). The relative standard deviation was 2.1% for 10 mug ml(-1) (N=11). Detection limit of glucose was 0.08 mug ml(-1). Ascorbic acid was also indirectly determined by the suppression of luminol-KIO(4)-H(2)O(2) CL system. The calibration curve was linear over the range of 1.0x10(-7)-1.0x10(-5) mol l(-1) of ascorbic acid. The relative standard deviation was 1.0% for 8.0x10(-7) mol l(-1) (N=11). Detection limit of ascorbic acid was 6.0x10(-8) mol l(-1). These proposed methods have been applied to determine glucose, ascorbic acid in tablets and injection.     

Highly sensitive spectrophotometric determination of osmium(VIII) with pyrogallolphthalein and hydrogen peroxide in the presence of Brij 35

Summary A highly sensitive determination of osmium(VIII) is based on the decolouring reaction with pyrogallolphthalein (gallein) and hydrogen peroxide in the presence of Brij 35. Beer's law was obeyed in the range of 0–0.5 ng of osmium(VIII) per 10 ml and the apparent decomposed absorption coefficient was 2.5×10⁹ l mol^–1 cm^–1 at 535 nm.Application of xanthene derivatives in analytical chemistry. Part XCIII. Part XCII see ref. [1]     

Synthesis of a novel chemiluminescent reagent for the determination of hydrogen peroxide in snow waters

7-(4,6-Dichloro-1,3,5-triazinylamino)-4-methylcoumarin (DTMC) was synthesized as a completely new chemiluminescent reagent, and with it a novel chemiluminescence method was developed for the determination of hydrogen peroxide in the absence of any added catalyst or co-oxidant. The chemiluminescence intensity of the DTMC-H(2)O(2) system could be enhanced by the addition of cation surfactants. The chemiluminescence intensity was directly proportional to the concentration of H(2)O(2) in the range 1.0 x 10(-7)-4.0x10(-4) mol l(-1), and the detection limit was 4.0 x 10(-8) mol l(-1). The relative S.D. was 4.9% for 1.0 x 10(-6) mol l(-1) of H(2)O(2) (n=10). The selectivity of this method was high, and most of the transition metal ions have no effect on the determination. The proposed method has been applied to the determination of trace amounts of hydrogen peroxide in snow water. A possible mechanism of the chemiluminescence reaction is also discussed.     

Determination of hydrogen peroxide by iron(III) complex of thiacalix[4]arenetetrasulfonate on a modified ion-exchanger with peroxidase-like catalytic activity.

An iron(III) complex of thiacalix[4]arenetetrasulfonate on a modified anion-exchanger (Fe3+-TCAS(A-500)) has shown high peroxidase-like activity at pH 5 - 6 for the reaction of quinoid-dye formation between 3-methyl-2-benzothiazolinone hydrazone and N-(3-sulfopropyl)aniline in the presence of hydrogen peroxide. Utilizing the peroxidase-like activity of Fe3+-TCAS(A-500) for this reaction, a method using Fe3+-TCAS(A-500) was applied for the spectrophotometric determination of hydrogen peroxide. The calibration curve by the method using Fe3+-TCAS(A-500) was linear over the range from 1 to 10 microg of hydrogen peroxide in a 1 ml sample solution. The apparent molar absorptivity for hydrogen peroxide was 2.4 x 10(4) l mol(-1) cm(-1). which was about 80% of that by peroxidase under the same conditions. This determination method of hydrogen peroxide using Fe3+-TCAS(A-500) was applied for the determination of glucose in diluted normal and abnormal control serum I and II.     

Flow injection determination of iron by its catalytic effect on the oxidation of 3,3',5,5'-tetramethylbenzidine by hydrogen peroxide

A flow injection-photometric method has been developed for the determination of iron(II+III). The method is based on the catalytic effect of iron(III) on the hydrogen peroxide oxidation of 3,3',5,5'-tetramethylbenzidine to form a blue compound (lambda(max)=650 nm). In this catalyzed reaction, 1,10-phenanthroline acted as an effective activator. Iron(II) is also determined, being oxidized by hydrogen peroxide. Calibration graphs for iron(II) and iron(III) obtained under the optimized conditions were identical with each other and linear in the range 0.2-200 ng ml(-1) with a detection limit of 0.05 ng ml(-1) iron. The reproducibility was satisfactory with a relative S.D. of 1.0% for ten determinations of 5 ng ml(-1) iron(III). The proposed method was successfully applied to the determination of iron in river and lake water samples and can be determined free iron species.     

A simple and rapid spectrophotometric method for the determination of nitrite by its decolorizing effect on peroxovanadate complex

A rapid, simple, and most economical spectrophotometric method was proposed for the determination of nitrite in various water samples, soil samples, and roots of leguminous plants. The method is based on decolorizing effect of nitrite on complex formed between hydrogen peroxide and vanadate in acidic medium. The decolorization of that complex by nitrite was exploited to monitor the reaction spectrophotometrically at 470 nm.The method was optimized for effect of concentrations of ammonium metavanadate, hydrogen peroxide, various acids, concentrations of sulphuric acid, order of reagents addition and color stability. The color of the complex was found to be stable for about 2 days, and the stability constant of the complex was also calculated by modified Job's method. The linearity range of the calibration graph was over 6.67-66.7 microg ml(-1) of nitrite with molar absorptivity, 0.276 x 10(3) mol(-1) l cm(-1) and Sandell's sensitivity, 0.1667 microg cm(-2). The method was applied successfully for the determination of nitrite in soil samples, various wastewater samples and roots of leguminous plants.     

Flow-injection photometric determination of sub-nanogram amounts of cobalt by its catalysis of the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone with N,N-dimethylaniline in a micellar medium

A catalytic flow-injection photometric method was developed for the determination of levels of cobalt as low as 10(-10) mol 1(-1). The method is based on the catalytic action of cobalt(II) on the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone with N,N-dimethylaniline to form a colored dye (lambda(max) = 590 nm) in the presence of hydrogen peroxide. The extremely activating effect was obtained in the presence of 1,2-dihydroxybenzene-3,5-disulfonate (Tiron) and sodium hydrogencarbonate as activators. Furthermore, the sensitivity of the method was enhanced by adding sodium dodecylsulfate as a surfactant. Linear calibration graphs were obtained over the range 0.04-0.2 ng ml(-1) and 0.1-0.5 ng ml(-1) cobalt(II). respectively, at a sampling rate of 30 per hour. The detection limit (signal/noise = 3) was 5 pg ml(-1) and the relative standard deviations for 0.1 and 0.04 ng ml(-1) cobalt (n = 10) were 1.0 and 2.3%, respectively. The method was applied to the determination of cobalt in pepperbush.     

胭脂红酸极谱行为的研究

在醋酸盐缓冲溶液中, 可获得胭脂红酸的单扫可逆吸附波。在pH4.3时, E_p=一0.65 V(vs. S.C.E.), 电极反应是由醌型还原为氢醌型。胭脂红酸在汞电极上的吸附符合Frumkin等温武。测得吸附系数β=7.0×10~6, 作用因素v=-0.92, 吸附速率常数k_(ads)=9.7×10~(-8) cms~(-1)。     

Determination of Osmium(VIII) by Flow Injection-Kinetic Methods Using Bromopyrogallol Red and Hydrogen Peroxide

A new flow injection-kinetic method has been developed for the determination of trace amount of osmium(WI), based on its catalytic effect on the bromopyrogallol red and hydrogen peroxide reaction. The reaction is followed spectrophotometrically by measuring the decrease in absorbance at 559 nm. The calibration graph for osmium(VIII) is linear over the range from 0.0040 to 0.10 μg/ml and the detection limit and sampling frequency are 0.0030 μg/ml and 47 per hour, respectively. The proposed method was applied to the determination of trace amounts of osmium in refined ores and chlorination residues with satisfactory results.     

Kinetic determination of ultramicro amounts of copper

A new catalytic reaction is proposed and a kinetic method developed for the determination of ultramicro amounts of Cu(II) on the basis of its catalytic activity in oxidation of the 2-thiosemicarbazone of sodium 1,2-naphthoquinone-4-sulphonate by hydrogen peroxide in the presence of ascorbic acid. Under optimal conditions the sensitivity of the method is 0.25 ng/ml. The relative error is 4.8-18.2% for the concentration range 5-0.8 ng/ml. Most foreign ions do not change the rate of the catalysed reaction. Co(2+) and I(-) catalyse the reaction, Ni(2+) extensively inhibits it, and in the presence of EDTA only the uncatalysed reaction takes place.     

Determination of ruthenium and osmium in each other's presence in chloride solutions by direct and third-order derivative spectrophotometry

Ruthenium and osmium (up to 20 mug Ru(Os) ml(-1)) can be determined in chloride solutions directly after absorption of RuO(4) and OsO(4) in hydrochloric acid. In 9 M HCl, RuO(4) and OsO(4) are quantitatively converted into RuCl(6)(2-) (lambda(max) = 480.0 nm, epsilon = 4.8 x 10(3) l mol(-1) cm(-1)) and OsCl(6)(2-) (lambda(max) = 334.8 nm, epsilon = 8.4 x 10(3) l mol(-1) cm(-1)) respectively. Osmium does not interfere with the determination of ruthenium in the form of the RuCl(6)(2-) complex by direct spectrophotometry. The absorbance of the obtained solution at lambda(max) = 480.0 nm corresponds only to the concentration of ruthenium. A derivative spectrophotometric method using numerical calculation of absorption spectra of the RuCl(6)(2-) and OsCl(6)(2-) complexes has been developed for the determination of osmium in a mixture with ruthenium. The interfering effect of ruthenium on the determination of osmium can be eliminated by measuring the value of a third-order derivative spectrum of the OsCl(6)(2-) complex at 350.0 nm ("zero-crossing point" of ruthenium). Simple and rapid determination of ruthenium and osmium in a calibration standard solution of the noble metals (Ru, Rh, Pd, Os, Ir, Pt and Au) for plasma spectroscopy using the proposed methods has been achieved.     

Selective and sensitive fluorometric determinations of cobalt(II) and hydrogen peroxide with fluorescein-hydrazide

Fluorophotometric determinations of cobalt(II) and hydrogen peroxide were investigated by using the fluorescence reaction between fluorescein-hydrazide (fl-NHNH(2)), and/or hydrogen peroxide, cobalt(II), respectively. The calibration graphs were liner in the range of 0-6.0 ng cobalt(II) and 0-1000 ng hydrogen peroxide per 10 ml at an emission wavelength (E(m)) of 530 nm with an exicitation wavelength (E(x)) of 508 nm, respectively. These proposed methods were selective and simple, and the effect of foreign ions was negligible in comparison with conventional reported methods such as nitroso R,4-(2-pyridylazo)resorcinol(PAR), alizarin, pyridine-2-aldehyde-2-pyridinehydrazone, stilbazo-cobalt(II), etc.     

Spectrofluorimetric determination of both hydrogen peroxide and -O-O-H in polyethylene glycols (PEGs) using 2-hydroxy-1-naphthaldehyde thiosemicarbazon (HNT) as the substrate for horseradish peroxidase (HRP)

2-Hydroxy-1-naphthaldehyde thiosemicarbazon (HNT) had been synthesized and used as a new kind of substrate for horseradish peroxidase (HRP) in spectrofluorimetric determination of hydrogen peroxide (H(2)O(2)). The oxidation reaction of HNT with H(2)O(2) under the catalysis of HRP was studied in detail. The possible reaction mechanism was discussed. Under optimum experimental conditions, the oxidized product of HNT had excitation and emission maxima at 260 and 450 nm, respectively. The linear range of this method was 1.30 x 10(-9)-1.25 x 10(-5) mol l(-1) with a detection limit of 3.89 x 10(-10) mol l(-1). The effect of interferences, surfactants and organic solvents on the determination of H(2)O(2) had been investigated. A study to prove the existence of -O-O-H in PEGs was carried out. The proposed method was successfully applied to the determination of -O-O-H in polyethylene glycols.     

过氧化物模拟酶催化的苯基荧光酮氧化反应及其分析应用

在ＮＨ４Ｃｌ－ＮＨ４ＯＨ缓冲介质中，氯化血红素（Ｈｅｍｉｎ）有显著的过氧化物模拟酶活性，催化过程化氢氧化苯基荧光酮褪色。本文探讨了反应机理，比较Ｈｅｍｉｎ与天然酶催化性能，考察反应条件和共存物质影响，从而提出测定Ｈｅｍｉｎ和过氧化氢的高灵敏分光光度法，线性范围分别为０￣３．０×１０＾－８ｍｏｌ／Ｌ和０￣１．２×１０＾５ｍｏｌ／Ｌ；检测限（３σ）分别为１．８×１０＾－１０ｍｏｌ／Ｌ和１．４×１０＾７     

Stopped-flow spectrophotometric determination of hydrogen peroxide with hemoglobin as catalyst

A rapid and sensitive method was proposed for the determination of hydrogen peroxide based on the catalytic effect of hemoglobin using o-phenylenediamine as the substrate. Stopped-flow spectrophotometric method was used to study the kinetic behavior of the oxidation reaction. The catalytic effectiveness of hemoglobin was compared with other four kinds of catalysts. The initial rate of the formation of the reaction product 2,3-diaminophenazine at the wavelength of 425 nm was monitored, permitting a detection limit of 9.2x10(-9) mol/l H(2)O(2). A linear calibration graph was obtained over the H(2)O(2) concentration range 5.0x10(-8)-3.5x10(-6) mol/l, and the relative standard deviation at a H(2)O(2) concentration of 5.0x10(-7) mol/l was 2.08%. Satisfied results were obtained in the determination of H(2)O(2) in real samples by this method.     

Kinetic Spectrophotometric Determination of Ascorbic Acid in Pharmaceutical Samples by Oxidation of Ponceau 4R by Hydrogen Peroxide

A new sensitive and simple kinetic method is developed for determination of traces of ascorbic acid based on its activated effect on oxidation of trisodium‐2‐hydroxy‐1‐(4‐sulphonato‐1‐naphthylazo)naphthalene‐6,8‐disulphonato (red artificial color Ponceau 4R) by hydrogen peroxide, in the presence of Cu(II) as catalyst, in borate buffer. The reaction is followed spectrophotometrically by tracing the oxidation product at 478.4 nm within 1 min after addition of H₂O₂. The optimum reaction conditions are: borate buffer (pH = 11.00), Ponceau 4R (9.6·10^?6 mol/L), H₂O₂ (2·10^?2 mol/L), Cu(II) (8·10^?7 mol/L) at 22 °C. Following this procedure, ascorbic acid can be determined with a linear calibration graph up to 1.76 ng/mL and a detection limit of 0.28, based on 3S criterion. The relative error ranges between 6.77‐1.66% for the concentration interval of ascorbic acid 1.76‐17.61 ng/mL. The effects of certain foreign ions upon the reaction rate were determined for an assessment of the selectivity of the method. The method was applied for determination of ascorbic acid in pharmaceutical samples, and spectrophotometric method was used like an comparative method.     

Determination of traces of osmium by the catalysed hydrogen peroxide-cyanocuprate(I) reaction

The reaction between hydrogen peroxide and a mixture of cyanocuprate(I) species at pH 11.2 is selectively catalysed by traces of osmium. With potentiometric or amperometric monitoring, osmium concentrations up to 1 ng ml can be determined, with a lowest determinable concentration of 0.03 ng ml . In the presence of luminol a Landolt-type reaction proceeds and visual or instrumental monitoring of the chemiluminescence can be used. A large number of other cations can be tolerated. The kinetics, mechanism, rate constants and Arrhenius parameters have been investigated.     

Application of the reaction between 2,2′-diquinoxalyl and tin(II) or titanium(III) to kinetic determination of copper and iron

The possibility of application was examined of a reaction between 2,2′-diquinoxalyl and tin(II) or titanium(III) to catalytic determination of copper and iron. The reaction parameters, the influence of the hydrogen peroxide concentration, the hydrochloric acid concentration, and the presence of strange ions on oxidation of the reduced form of 2,2′-diquinoxalyl were tested.The usefulness of the established method was proven for the determination of copper(II) and iron(III) ions in the spectrally pure salts, having the concentration range of those ions 10^?4-10^?5%. The sensitivity of the discussed method is of 0.04 μg/ml.     

Speciation of chromium by in-capillary reaction and capillary electrophoresis with chemiluminescence detection

A sensitive method for the simultaneous determination of chromium(III) (Cr3+) and chromium(VI) (CrO4(2-)) using in-capillary reaction, capillary electrophoresis (CE) separation and chemiluminescence (CL) detection was developed. The chemiluminescence reaction was based on luminol oxidation by hydrogen peroxide in basic aqueous solution catalyzed by Cr3+ ion followed by capillary electrophoresis separation. Based on in-capillary reduction, chromium(VI) can be reduced by acidic sodium hydrogensulfite to form chromium(III) while the sample is running through the capillary. Before the electrophoresis procedure, the sample (Cr3+ and CrO4(2-)), buffer and acidic sodium hydrogensulfite solution segments were injected in that order into the capillary, followed by application of an appropriate running voltage between both ends. As both chromium species have opposite charges, Cr3+ ions migrate to the cathode, while CrO4(2-) ions, moving in the opposite direction toward the anode, react with acidic sodium hydrogensulfite which results in the formation of Cr3+ ions. Because of the migration time difference of both Cr3+ ions, Cr(III) and Cr(VI) could be separated. The running buffer was composed of 0.02 mol l(-1) acetate buffer (pH 4.7) with 1 x 10(-3) mol l(-1) EDTA. Parameters affecting CE-CL separation and detection, such as reductant (sodium hydrogensulfite) concentration, mixing mode of the analytes with CL reagent, CL reaction reagent pH and concentration, were optimized. The limits of detection (LODs) of Cr(III) and Cr(VI) were 6 x 10(-13) and 8 x 10(-12) mol l(-1) (S/N=3), respectively. The mass LODs for Cr(III) and Cr(VI) were 1.2 x 10(-20) mol (12 zmol) and 3.8 x 10(-19) mol (380 zmol), respectively.