Poly（ethylenimine）-grafted-poly[（aspartic acid）-co-lysine] ： A Nonviral Polymer with Potential for DNA Delivery

A biodegradable gene transfer vector, poly(ethylenimine)-grafted-poly[(aspartic acid)-co-lysine] has been developed by thermal polycondensation of aspartic acid and lysine, and branch poly(ethylenimine) (Mw less than 600) was grafted to the backbone. The polymer was characterized by ^1H NMR. It appeared lower cytotoxity compared to poly(ethylenimine) (25KDa),which was quantified by MTT assay. Electrophoresis indicated that the polymer could retardate DNA at N/P ratio 1.2-1.8 (w/w). Transfection efficiency of the complexes was studied in NT2 cell lines. It was 1.5 fold higher than molecular weight PEI (Mw=25KDa).     

Immobilization and hybridization of DNA based on magnesium ion modified 2,6-pyridinedicarboxylic acid polymer and its application for label-free PAT gene fragment detection by electrochemical impedance spectroscopy

A new approach for a simple electrochemical detection of PAT gene fragment is described. Poly(2,6-pyridinedicarboxylic acid) (PDC) modified glassy carbon electrode (GCE) was prepared by potential scan electropolymerization in an aqueous solution. Mg2 ions were incorporated by immer-sion of the modified electrode in 0.5 mol/L aqueous solution of MgCl2 to complete the preparation of a generic "activated" electrode ready for binding the probe DNA. The ssDNA was linked to the conduct-ing polymer by forming a bidentate complex between the carboxyl groups on the polymer and the phosphate groups of DNA via Mg2 . DNA immobilization and hybridization were characterized with dif-ferential pulse voltammetry (DPV) by using methylene blue (MB) as indicator and electrochemical im-pedance spectroscopy (EIS). The EIS was of higher sensitivity for DNA detection as compared with voltammetric methods in our strategy. The electron transfer resistance (Ret) of the electrode surface in EIS in [Fe(CN)6]3-/4- solution increased after the immobilization of the DNA probe on the Mg/PDC/GCE electrode. The hybridization of the DNA probe with complementary DNA (cDNA) made Ret increase further. The difference between the Ret at ssDNA/Mg/PDC/GCE and that at hybridization DNA modified electrode (dsDNA/Mg/PDC/GCE) was applied to determine the specific sequence related to the target PAT gene with the dynamic range comprised between 1.0 × 10-9 and 1.0 × 10_5 mol/L. A detection limit of 3.4 × 10-10 mol/L of oligonucleotides can be estimated.     

NONCONVENTIONAL EMULSION POLYMERIZATION OF ACRYLONITRILE CATALYZED BY in situ METAL COMPLEX

Nano-sized polyacrylonitrile (PAN) particles were prepared under the catalytic effect of in situ developed CoCl2/EDTA complex with ammonium persulfate as the initiator in the absence of any added emulsifier. The emulsion polymerization was studied at varying concentrations of the initiator, monomer, complex and solvent over a temperature range of 30-70℃. The overall activation energy (Ea, 49.79 kJ/mol), energy of dissociation of initiator (Ed,82.68 kJ/mol), number of micelles (0.163×1018) and the viscosity average molecular weight of the polymer were computed. The distribution of particle sizes was determined by transmission electron microscopy (TEM). It was found that the oil-in-water polymerization was stabilized by the presence of the CoCl2/EDTA in situ complex reducing the particle size into the nano order. The average diameters of PAN nano particles, obtained by TEM, were in the range of 50-150 nm at the maximum conversion. The experimental particle size was mainly dependent on the concentration of the complex and temperature.     

SYNTHESIS OF POLY（3,4-AZOPYRIDYLENE） AND OXYGEN-BINDING AFFINITY OF ITS COMPLEX WITH COBALTPORPHYRIN

Synthesis and characteristics of poly(3,4-azopyridylene) (PAP), conductivity and oxygen-binding affinity of its complex with meso-α,α,α,α-tetrakis(o-pivalamidophenyl) porphyrinatocobalt(Ⅱ) (CoP) were studied. PAP was prepared by oxidative polymerization of 3,4-diaminopyridine (DAP) in DMF solution using CuCl/pyridine as the catalyst. IR and NMR results showed that the peak of amido group in DAP was converted to the azo group in PAP and a π conjugated polymer was synthesized. The average molecular weight of PAP was determined to be 5.0 × 103. The PAP-CoP complex was prepared by complexing the pyridyl group of PAP with the fifth coordination site of CoP in DMF solution. In comparison with the CoP complex with a non-π conjugated polymer, the PAP-CoP complex shows good electroconductivity of 5.8 × 10-6 Scm-1. The PAP-CoP complex displays a reversible change in the UV-Visible absorption spectrum from the deoxy form to the oxy or oxygen-binding one with an isosbestic point, in response to the partial oxygen pressure of the atmosphere. The oxygen-response behavior was monitored at the absorbance ascribed to the oxy form at 548 nm to give the oxygen-binding affinity.The oxygen-binding equilibrium curves of PAP-CoP complex obey a Langmuir isotherm. DMF has great effects on the oxygen-binding properties of the PAP-CoP complex. The oxygen-binding affinity of PAP-CoP complex in the solid state is higher than that in DMF solution. With decreasing temperature, the oxygen-binding affinity of the PAP-CoP complex increases.     

NONCONVENTIONAL EMULSION POLYMERIZATION OF ACRYLONITRILE CATALYZED BY in situ METAL COMPLEXw

 Nano-sized polyacrylonitrile (PAN) particles were prepared under the catalytic effect of in situ developed CoCl₂/EDTA complex with ammonium persulfate as the initiator in the absence of any added emulsifier. The emulsion polymerization was studied at varying concentrations of the initiator, monomer, complex and solvent over a temperature range of 30-70^oC. The overall activation energy (Ea, 49.79 kJ/mol), energy of dissociation of initiator (Ed, 82.68 kJ/mol), number of micelles (0.163 x 1018) and the viscosity average molecular weight of the polymer were computed. The distribution of particle sizes was determined by transmission electron microscopy (TEM). It was found that the oil-in-water polymerization was stabilized by the presence of the CoCl₂/EDTA in situ complex reducing the particle size into the nano order. The average diameters of PAN nano particles, obtained by TEM, were in the range of 50–150 nm at the maximum conversion. The experimental particle size was mainly dependent on the concentration of the complex and temperature.     

Synthesis of a New Cobalt （Ⅱ） Complex and its Interaction with DNA

A new complex of bis(N-benzyl benzotriazole-N^3) dichloro Co(Ⅱ) (Co(Ⅱ)L2Cl2) was synthesized and its crystal was characterized. The interaction of this new complex with fs-DNA was studied by electrochemical and UV spectrophotometric method. In 0.01 mol/L pH 4.2 Tris-HCl buffer solution Co(Ⅱ)L2Cl2 has two reductive peaks with peak potentials at 0.38 V and 0.27 V, respectively, and an oxidative peak at 1.05 V. After the addition of DNA, the peak currents decrease and the peak potential at 0.27 V shifts negatively. The UV spectrophotometric experiment indicates that the maximum absorbance of Co(Ⅱ)L2Cl2 at 204 nm decreases and exhibits bathochromic shift after the addition of DNA. All the results reveal that Co(Ⅱ)L2Cl2binds with DNA by intercalation as well as electrostatic interaction.     

INVESTIGATION OF POLYDL-LACTIDE-b-POLY（ETHYLENE GLYCOL）-b-POLYDL-LACTIDE MICROSPHERES CONTAINING PLASMID DNA

PolyDL-lactide (PDLLA) and the block copolymer, polyDL-lactide-b-poly(ethylene glycol)-b-polyDL-lactide (PELA) were used as the microsphere matrix to encapsulate plasmid DNA. The PDLLA, PELA, pBR322-1oaded PDLLA and pBR322-1oaded PELA microspheres were prepared by solvent extraction method based on the formation of multiple w1/o/w2 emulsion. The microspheres were characterized by surface morphology, mean particle size, particle size distribution and loading efficiency. The integrity of DNA molecules after being extracted from microspheres was determined by agarose gel electrophoresis. The result suggested that plasmid DNA molecules could retain their integrity after being encapsulated by PELA. The PELA microspheres could prevent plasmid DNA from being digested by DNase. The in vitro degradation and release profiles of plasmid DNA-loaded microspheres were measured in pH - 7.4 buffer solution at 37℃. The in vitro degradation profiles of the microspheres were evaluated by the deterioration in microspheres surface morphology, the molecular weight reduction of polymer, the mass loss of microspheres, the changes of pH values of degradation medium, and the changes of particle size. The in vitro release profiles of the microspheres were assessed by measurement of the amount of DNA presented in the release medium at determined intervals. The release profiles were correlation with the degradation profiles. The release of plasmid DNA from PELA microspheres showed a similar biphasic trend, that is, an initial burst release was followed by a slow, but sustained release.     

三元配合物钯（Ⅱ）-2,2''-联吡啶-L-天冬氨酸与DNA作用研究

The ternary complex Pd(Ⅱ)-2,2‘-bipyridine-L-asparagic acid was synthesized and characterized by elemental analysis, IR-spectra and molar conductance. The formula of the complex is Pd(bipy)(L-asp). The interaction of the complex with DNA has been studied by UV-spectra, fluorescence spectra, CD-spectra and gel electrophoresis. The results showed that the interaction of the complex with DNA performed mainly in intercalative mode and the extent of interaction was dependent on the concentration of the complex.     

SYNTHESIS, CHARACTERIZATION AND CATALYTIC ACTIVITY OF N,N‘-BIS(3-ALLYL SALICYLIDENE)ETHYLENEDIAMINE COBALT(II) SCHIFF BASE COMPLEX ANCHORED ON A NEW POLYMER SUPPORT

A new chelating polymer support has been prepared by suspension copolymeriz a tion of synthesized N,N‘-bis(3-allyl salicylidene)ethylenediamine monomer Schiff base (N,N‘-BSEDA) with styrene (St) and divinylbenzene (DVB) using azobisisobutyronitrile (AIBN) as initiator in the presence of poly(vinyl alcohol). The content and complexation ability of monomer Schiff base (N,N‘-BSEDA) for cobalt(II) ions in prepared crosslinked polymer beads have shown dependence on the amount of DVB used in reaction mixture. The amount of monomer Schiff base (N,N‘-BSEDA) in crosslinked beads showed a substantial decreasing trend at high concentration of DVB in the reaction mixture (＞ 1.5 mol dm-3), hence the efficiency of complexation (EC%) and cobalt(II) ion loading (EL%) of polymer beads showed a decreasing trend. The structure of monomer Schiff base (N,N‘-BSEDA) and its cobalt(II) complex on polymer support was elucidated by IR, UV and magnetic measurements. The catalytic activity of polymer bound cobalt(Ⅱ) Schiff base complex was evaluated by analyzing kinetic data of decomposition of hydrogen peroxide in the presence of either supported cobalt (II) complex or free cobalt(II) complex. The activation energy for the decomposition of hydrogen peroxide by polymer supported cobalt(II)complex was found to be low (33.37 kJ mol-l) in comparison with unsupported cobalt(II) complex (56.35 kJ mol-1). On the basis of experimental observations, reaction steps are proposed and a suitable rate expression derived.     

Synthesis and Magnetic Properties of Fe（Ⅱ） and Nd（Ⅲ） Complexes of Poly（N-2-thiazolylacrylamide）

N-2-Thiazolylacrylamide （NTA） was polymerized by a radical route to obtain the polymer in good yield. The polymer with a pendent heterocyclic group is soluble in common organic solvents, which allow to prepare the corresponding metal complexes with higher loads easily. FTIR, ^1H NMR, elemental analysis, and energy-dispersive X-Ray spectroscopy （EDX） were applied to characterize these materials. The magnetic behavior of Fe（Ⅱ） and Nd（Ⅲ） complexes of poly（N-2-thiazolylacrylamide） was examined by a PPMS-9T magnetometer, exhibiting the characteristics of a soft ferromagnet. It is found that the Nd（Ⅲ） complex has an extremely high relative saturation magnetization of 35 emu/g.     

Electrochemical polymerization of nano-micro sheaf/wire conducting polymer poly[Ni(salen)] for electrochemical energy storage system

<正>The polymer of complex[Ni(salen)],(N,N'-ethylenebis(salicylideneaminato) nickel(H)),was prepared on graphite electrode by the route of linear sweep potential method.The nano-micro sheaf/wire structures of poly[Ni(salen)]have been obtained by adjusting the polymerization sweep rate of 5,20 and 40 mV·s~(-1).The polymer prepared at 20 mV·s~(-1) had nanoscaled wire structure of ca.100 nm in diameter.The good electrochemical reversibility of poly[Ni(salen)]was investigated by cyclic voltammetry and galvanostatic test in 1.0 mol/L Et_3MeNBF_4/acetonitrile solution.The initial specific gravimetric capacitance of poly[Ni(salen)]at the current density of 0.1 mA·cm~(-2) reached 270.2 F·g~(-1),however,the cycle stability needs to be improved.     

基于pH敏感相分离技术的新型荧光免疫测定体系

In this paper, it was discovered that a novel pH-sensitive copolymer of N-isopropylacrylamide (NIP) and N-(3-dimethylaminopropyl)methacrylamide (DMAPM) could be gotten by polymerization. The phase transition pH (pHtr) of P(NIP-DMAPM) polymer was found to be 7.4 at 37℃. The polymer was precipitated out of water above a critical pH=7.4 and re-dissolved below pH----7.4. The characteristic of this polymer made it possible to carry out the immunochemical steps of an immunoassay in a true solution and then to quickly separate the resulting product from the reaction mixture. In a competitive fluorescence immunoassay, the standard rabbit IgG and rabbit IgG immobilized on P(NIP-DMAPM) first competitively reacted with the fluorescein isothiocyanate (FITC) labeled antibody, then the pH of solution was adjusted above the pHtr of polymer to precipitate the polymer-immune complex,and the polymer-immune complex precipitate was separated and re-dissolved by the adjustment of pH, finally the FITC-labeled antibody in the immune complex was quantified by fluorescence measurement. The calibration graph for rabbit IgG was linear over the range of 100-1000 ng/mL with a detection limit of 11 ng/mL. The method is rapid, sensitive and simple. Owing to neutral pHtr of P(NIP-DMAPM), the damage to antigen-antibody immune complex was greatly decreased in the course of separation. In addition, a sandwich enzyme-linked fluorescence immunoassay method for the determination of human IgG was also developed, showing that the pH-sensitive phase separating immunoassay could be performed in the competitive method as well as the sandwich method.     

Structure and Photosynthetic Mimicking of Bis（2,6—bis（benzimidazol—2—yl）pyridine）manganese（Ⅱ）

Mn(bzimpy)2(1)[bzimpy=2,6-bis(benzimidazol-2-yl)pyridine],a mononuclear manganese(Ⅱ）complex,was synthesized by the reaction of Mn(OOCMe)2 with bzimpy in absolute ethanol.The complex was structurally characterized by elemental analysis,cyclic voltammetry,and X-ray crystallography.In the complex,the manganese-nitrogen distances were different,and the geometry and the metal ion environment showed the distortion.The cyclic voltammetric measurements have been performed to assess its redox characteristics.The presence of oxidation wave at 0.62V and 0.081V vs.SCE or 0.8V and 1.0v vs.NHE suggested that this complex could catalyze the oxidation of water,therefore,simulate the water-oxidizing complex(WOC) of photosystem Ⅱ (PS Ⅱ).The measurements of photoreduction of 2,6-dichlorophenolindophenol (DCPIP),and oxygen evolution in the manganess-depleted and the comples 1-reconstituted PS Ⅱ preparations just support our conjecture.     

Synthesis and Magnetic Properties of Polyamide Complex Containing Bithiazole Moieties

A new polyamide containing bithiazole moieties （PTA） was synthesized by the polycondensation of 2, 2＇-diamino-4, 4＇-bithiazole （DABT） and oxalyl chloride. The polymer complex was prepared from PTA and NdC13 in DMSO. They were characterized through IR and elemental analysis. The preliminary magnetic properties of the complex PTA-Nd^3＋ was investigated, it was found that the material is a ferromagnet at low temperature.     

由乙氧基铅配合物制备纳米PbO

Lead complex was directly synthesized by electrochemical dissolution of lead in a cell without separating the cathode and anode. The product was characterized by FTIR, Raman spectra and ¹H NMR. The xerogel was prepared by a direct sol-gel of the electrolyte solution and then dryness of it. The xerogel was heated at 450 ℃ for 2 h to obtain the nano-PbO powder. FTIR, XRD, and TEM were used to investigate the structure of nano-PbO. The results show that the lead complex is Pb(OEt)₂(acac)₂, which contains acac- group and could prevent the precursor from hydrolysis and sintering during the calcinations process. The nano-PbO of 20～30 nm was thus obtained in a high purity by drying at 450 ℃.     

Two Cu(Ⅱ) Complexes with Hydrolyzed Nicotinamide Ligand: Crystal Structures and Bioactivities

Two Cu(Ⅱ) complexes of [Cu(2,6-DPC)(Hnta)(H_2O)]·H_2O(2,6-DPC = 2,6-pyridinedicarboxylic-carboxylate, Hnta = nicotinic acid) and [Cu_2(2,4-D)_4(Hnta)_2](2,4-D = 2,4-dichlorophenoxyacetic-carboxylate) were synthesized and successfully obtained as single crystals in this paper. The supramolecular structures of the complexes from zero to three dimensions and the weak intermolecular force in the crystal were analyzed. The single-crystal structures of the complexes were further analyzed by Hirshfeld surface analysis. The competition capacity of the complexes about calf thymus DNA(ct-DNA) was also analyzed by fluorescence spectroscopy. The ability of complexes to cleave the plasmid DNA(pBR322-DNA) was determined by gel electrophoresis assay. And at last, the complexes' cytotoxic activities were reviewed for four kinds of cancer cell lines(HeLa, MCF-7, HepG, SKOV-3), showing that the coordination polymer has anti-tumor activity and cytotoxicity.     

DNA Binding Properties and Cytotoxic Activities of Two Trinuclear Ruthenium（Ⅱ） Polypyridyl Complexes

The interactions between two trinuclear Ru（II） complexes and calf thymus DNA（CT DNA） were studied via absorption spectroscopy, reverse salt titrations, binding stoichiometry, DNA melting experiments, as well as viscosity measurement. The results indicate that complexes 1 and 2 bind to DNA via the interaction of the planar π-delocalized system of the complexes with intrinsic binding constants of 4.18 × 10^5 and 3.85 × 10^6 L/tool, respectively, and non-electrostatic binding free energy makes a predominant contribution to the binding free energy. The in vitro cytotoxic activity of complexes 1 and 2 was evaluated by the MTT[3-（4,5-dimethylthiazol-2-yl）-2,5-diphenyl- 2H-tetrazolium bromide] method. Complex I shows higher anticancer potency than complex 2 against four tumor cell lines. Further mechanism study indicates that complexes 1 and 2 can cause cell cycle arrest in the G2/M phase.     

Synthesis and Characterization of A Small Molecule CFTR Chloride Channel Inhibitor

A thiazolidinone CFTR inhibitor (CFTRinh-72) was synthesized by a three-step procedure with tri-fluromethylaniline as the starting material. The synthesized CFTR inhibitor was characterized structurally bymeans of ^1H NMR and functionally in a CFTR-expressing cell line FRT/hCFTR/EYFP-H148Q by both fluo-rescent and electrophysiological methods. A large amount(100g) of high-quality small molecule thiazolidi-none CFTR chloride channel inhibitor, CFTRinh-72, can be produced with this simple three-step synthetic pro-cedure. The structure of the final product 2-thioxo-3-(3-trifluromethylphenyl )-5-[4-carboxyphenyl-methylene]-4-thiazolidinone was confirmed by ^1H NMR. The overall yield was 58% with a purity over 99%as analyzed by HPLC. The synthesized CFTRinh-72 specifically inhibited CFTR chloride channel function in acell-based fluorescence assay(Kd≈1.5μmol/L) and in a Ussing chamber-based short-circuit current assay(Kd≈0. 2μmol/L), indicating better quality than that of the commercial combinatorial compound. The syn-thesized inhibitor is nontoxic to cultured cells at a high concentration and to mouse at a high dose. The syn-thetic procedure developed here can be used to produce a large amount of the high-quality CFTRinh-72 suitablefor antidiarrheal studies and for creation of cystic fibrosis models in large animals. The procedure can be usedto synthesize radiolabled CFTRinh-72 for in νiνo pharmacokinetics studies.     

Preparation and Cyclic Voltammetry Characterization of Cu—dipyridyl Imprinted Polymer

Polymer capable of specific binding to Cu-dipyridyl complex was prepared by molecular imprinting technology. The binding specificity of the polymer to the template (Cu-dipyridyl complex) was in vestigated by cyclic voltametric scanning using the carbon paste electrode modified by polymer particles in phosphate buffer solution. Factors that influence rebinding of the imprinted polymer were explored. The result demonstrated that the cycllic voltammetry was an efficient approach to explore interactions between template and imprinted polymers.     

新的聚苯乙烯负载锌化合物:高效苯酚氧化催化剂(英文)

The novel recyclable free –ONNO– tetradentate Schiff base ligand N,N′‐bis(2‐hydroxy‐3‐ methox‐ybenzaldehyde)4‐methylbenzene‐1,2‐diamine (3‐MOBdMBn) was synthesized. Complexation of this ligand with zinc(3‐MOBdMBn‐Zn) was performed, and the catalytic activity of the complex was evaluated. The polymer‐supported analog of this complex(P‐3‐MOBdMBn‐Zn) was synthesized, and its catalytic activity was studied. These free and polymer‐anchored zinc complexes were prepared by the reactions of metal solutions with one molar equivalent of unsupported 3‐MOBdMBn or P‐3‐MOBdMBn in methanol under nitrogen. The catalytic activity of 3‐MOBdMBn‐Zn and P‐3‐MOBdMBn‐Zn was evaluated in phenol oxidation. The activity of P‐3‐MOBdMBn‐Zn was signif‐icantly affected by the polymer support, and the rate of phenol conversion was around 50% for polystyrene‐supported 3‐MOBdMBn. The experimental results indicated that the reaction rate was affected by the polymer support, and the rate of phenol conversion was 1.64 μmol/(L·s) in the presence of polystyrene‐supported 3‐MOBdMBn.