All-polymer solar cells with perylenediimide polymer acceptors

Four polymers based on perylenediimide co-polymerized with thiophene, bithiophene, selenophone and thieno[3,2-b]thiophene were investigated as the acceptor materials in all-polymer solar cells. Two different donor polymers, poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b′]dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene)-2-carboxylate-2,6-diyl](PTB7-Th) and poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3′′′-di(2-dodecyltetradecyl)-2,2′;5′,2″;5″,2′′′-quaterthiophen-5,5′′′-diyl)](Pff BT4T-2DT), with suitably complementary absorption spectra and energy levels were applied and examined. Among all different donor-acceptor pairs studied here, the combination of PTB7-Th:poly[N,N′-bis(1-hexylheptyl)-3,4,9,10-perylenediimide-1,6/1,7-diyl-alt-2,5-thiophene](PDI-Th) exhibited the best power conversion efficiency(PCE) of 5.13%, with open-circuit voltage(V_(oc)) = 0.79 V, short-circuit current density(J_(sc)) = 12.35 mA·cm~(-2) and fill-factor(FF) = 0.52. The polymer of PDI-Th acceptor used here had a regio-irregular backbone, conveniently prepared from a mixture of 1,6- and 1,7-dibromo-PDI. It is also noteworthy that neither additive nor posttreatment is required for obtaining such a cell performance.     

DNA Sequence and Ancillary Ligand Modulate the Biexponential Emission Decay of Intercalated [Ru(L)2dppz]2+ Enantiomers

The bi‐exponential emission decay of [Ru(L)₂dppz]²⁺ (L=N,N′‐diimine ligand) bound to DNA has been studied as a function of polynucleotide sequence, enantiomer, and nature of L (phenanthroline vs. bipyridine). The lifetimes (τ_i) and pre‐exponential factors (α_i) depend on all three parameters. With [poly(dA‐dT)]₂, the variation of α_i with [Nu]/[Ru] has little dependence on L for Λ‐[Ru(L)₂dppz]²⁺ but a substantial dependence for Δ‐[Ru(L)₂dppz]²⁺. With [poly(dG‐dC)]₂, by contrast, the Λ‐enantiomer α_i values depend strongly on the nature of L, whereas those of the Δ‐enantiomer are relatively unaffected. DNA‐bound linked dimers show similar photophysical behaviour. The lifetimes are identified with two geometries of minor‐groove intercalated [Ru(L)₂dppz]²⁺, resulting in differential water access to the phenazine nitrogen atoms. Interplay of cooperative and anti‐cooperative binding resulting from complex–complex and complex–DNA interactions is responsible for the observed variations of α_i with binding ratio. [Ru(phen)₂dppz]²⁺ emission is quenched by guanosine in DMF, which may further rationalise the shorter lifetimes observed with guanine‐rich DNA.     

Stimuli-Responsive Resorcin[4]arene Cavitands: Toward Visible-Light-Activated Molecular Grippers

Resorcin[4]arene cavitands, equipped with diverse quinone ( Q ) and [Ru(bpy)₂dppz]²⁺ (bpy=2,2′-bipyridine, dppz=dipyrido[3,2-a:2′,3′-c]phenazine) photosensitizing walls in different configurations, were synthesized. Upon visible-light irradiation at 420 nm, electron transfer from the [Ru(bpy)₂dppz]²⁺ to the Q generates the semiquinone ( SQ ) radical anion, triggering a large conformational switching from a flat kite to a vase with a cavity for the encapsulation of small guests, such as cyclohexane and heteroalicyclic derivatives, in CD₃CN. Depending on the molecular design, the SQ radical anion can live for several minutes (≈10 min) and the vase can be generated in a secondary process without need for addition of a sacrificial electron donor to accumulate the SQ state. Switching can also be triggered by other stimuli, such as changes in solvent, host–guest complexation, and chemical and electrochemical processes. This comprehensive investigation benefits the development of stimuli-responsive nanodevices, such as light-activated molecular grippers.     

DNA-Targeting RuII-Polypyridyl Complex with a Long-Lived Intraligand Excited State as a Potential Photodynamic Therapy Agent

Subtle ligand modifications on Ru^II-polypyridyl complexes may result in different excited-state characteristics, which provides the opportunity to tune their photo-physicochemical properties and subsequently change their biological functions. Here, a DNA-targeting Ru^II-polypyridyl complex (named Ru1 ) with highly photosensitizing ³IL (intraligand) excited state was designed based on a classical DNA-intercalator [Ru(bpy)₂(dppz)] ⋅ 2 PF₆ by incorporation of the dppz (dipyrido[3,2-a:2′,3′-c]phenazine) ligand tethered with a pyrenyl group, which has four orders of magnitude higher potency than the model complex [Ru(bpy)₂(dppz)] ⋅ 2 PF₆ upon light irradiation. This study provides a facile strategy for the design of organelle-targeting Ru^II-polypyridyl complexes with dramatically improved photobiological activity.     

Ternary Blend Strategy for Achieving High-Efficiency Organic Photovoltaic Devices for Indoor Applications

Monomeric perylene diimide (PDI) small molecules display a high absorption coefficient and crystallinity in solid-state thin films due to strong π–π interactions between the molecules. To take advantage of these exciting properties of PDIs, N,N'-bis(1-ethylpropyl)perylene-3,4,9,10-tetracarboxylic diimide (EP-PDI) was mixed with a binary blend of PTB7 and PC₇₁BM to fabricate an efficient ternary blend, which were in turn used to produce organic photovoltaic (OPV) devices well suited to indoor applications (PTB7=poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl}), PC₇₁BM=[6,6]-phenyl-C₇₁-butyric acid methyl ester). We varied the PC₇₁BM/EP-PDI weight ratio to investigate the influence of EP-PDI on the optical, electrical, and morphological properties of the PTB7:PC₇₁BM:EP-PDI ternary blend. Compared with the reference PTB7:PC₇₁BM binary blend, the ternary blends showed strong optical absorption in the wavelength range in which the spectra of indoor LED lamps show their strongest peaks. The addition of EP-PDI to the binary blend was found to play an important role in altering the morphology of the blend in such a way as to facilitate charge transport in the resulting ternary blend. Apparently, as a result, the optimal PTB7:PC₇₁BM:EP-PDI-based inverted OPV device exhibited a power conversion efficiency (PCE) of 15.68 %, a fill factor (FF) of 68.5 %, and short-circuit current density (J_SC) of 56.7 μA cm⁻² under 500 lx (ca. 0.17 mW cm⁻²) indoor LED light conditions.     

Strong Ligand Stabilization Based on π-Extension in a Series of Ruthenium Terpyridine Water Oxidation Catalysts

The substitution behavior of the monodentate Cl ligand of a series of ruthenium(II) terpyridine complexes (terpyridine (tpy)=2,2′:6′,2′′-terpyridine) has been investigated. ¹H NMR kinetic experiments of the dissociation of the chloro ligand in D₂O for the complexes [Ru(tpy)(bpy)Cl]Cl ( 1 , bpy=2,2’-bipyridine) and [Ru(tpy)(dppz)Cl]Cl ( 2 , dppz=dipyrido[3,2-a:2′,3′-c]phenazine) as well as the binuclear complex [Ru(bpy)₂(tpphz)Ru(tpy)Cl]Cl₃ ( 3 b , tpphz=tetrapyrido[3,2-a:2′,3′-c:3′′,2′′-h:2′′′,3′′′-j]phenazine) were conducted, showing increased stability of the chloride ligand for compounds 2 and 3 due to the extended π-system. Compounds 1 – 5 ( 4 =[Ru(tbbpy)₂(tpphz)Ru(tpy)Cl](PF₆)₃, 5 =[Ru(bpy)₂(tpphz)Ru(tpy)(C₃H₈OS)/(H₂O)](PF₆)₃, tbbpy=4,4′-di-tert-butyl-2,2′-bipyridine) are tested for their ability to run water oxidation catalysis (WOC) using cerium(IV) as sacrificial oxidant. The WOC experiments suggest that the stability of monodentate (chloride) ligand strongly correlates to catalytic performance, which follows the trend 1 > 2 > 5 ≥ 3 > 4 . This is also substantiated by quantum chemical calculations, which indicate a stronger binding for the chloride ligand based on the extended π-systems in compounds 2 and 3 . Additionally, a theoretical model of the mechanism of the oxygen evolution of compounds 1 and 2 is presented; this suggests no differences in the elementary steps of the catalytic cycle within the bpy to the dppz complex, thus suggesting that differences in the catalytic performance are indeed based on ligand stability. Due to the presence of a photosensitizer and a catalytic unit, binuclear complexes 3 and 4 were tested for photocatalytic water oxidation. The bridging ligand architecture, however, inhibits the effective electron-transfer cascade that would allow photocatalysis to run efficiently. The findings of this study can elucidate critical factors in catalyst design.     

Synthesis, DNA-binding and photocleavage studies of [Ru(phen)2(pbtp)] and [Ru(bpy)2(pbtp)] (phen = 1,10-phenanthroline; bpy = 2,2′-bipyridine; pbtp = 4,5,9,11,14-pentaaza-benzo[b]triphenylene)

Based on the ligand dppz (dppz = dipyrido-[3,2-a:2′,3′-c]phenazine), a new ligand pbtp (pbtp = 4,5,9,11,14-pentaaza-benzo[b]triphenylene) and its polypyridyl ruthenium(II) complexes [Ru(phen)₂(pbtp)]²⁺ (1) (phen = 1,10-phenanthroline and [Ru(bpy)₂(pbtp)]²⁺ (2) (bpy = 2,2′-bipyridine) have been synthesized and characterized by elemental analysis, ES-MS and ¹H NMR spectroscopy. The DNA-binding of these complexes were investigated by spectroscopic methods and viscosity measurements. The experimental results indicate that both complexes 1 and 2 bind to CT-DNA in classical intercalation mode, and can enantioselectively interact with CT-DNA. It is interesting to note that the pbtp ruthenium(II) complexes, in contrast to the analogous dppz complexes, do not show fluorescent behavior when intercalated into DNA. When irradiated at 365 nm, both complexes promote the photocleavage of pBR 322 DNA.     

[Ru(bpy)2(dcbpy)NHS] Labeling/Aptamer‐Based Biosensor for the Detection of Lysozyme by Increasing Sensitivity with Gold Nanoparticle Amplification

A novel [Ru(bpy)₂(dcbpy)NHS] labeling/aptamer‐based biosensor combined with gold nanoparticle amplification for the determination of lysozyme with an electrochemiluminescence (ECL) method is presented. In this work, an aptamer, an ECL probe, gold nanoparticle amplification, and competition assay are the main protocols employed in ECL detection. With all the protocols used, an original biosensor coupled with an aptamer and [Ru(bpy)₂(dcbpy)NHS] has been prepared. Its high selectivity and sensitivity are the main advantages over other traditional [Ru(bpy)₃]²⁺ biosensors. The electrochemical impedance spectroscopy (EIS) and atomic force microscopy (AFM) characterization illustrate that this biosensor is fabricated successfully. Finally, the biosensor was applied to a displacement assay in different concentrations of lysozyme solution, and an ultrasensitive ECL signal was obtained. The ECL intensity decreased proportionally to the lysozyme concentration over the range 1.0×10^?13–1.0×10^?8 mol L^?1 with a detection limit of 1.0×10^?13 mol L^?1. This strategy for the aptasensor opens a rapid, selective, and sensitive route for the detection of lysozyme and potentially other proteins.     

Structure of the Complex of [Ru(tpm)(dppz)py]2+ with a B‐DNA Oligonucleotide—A Single‐Substituent Binding Switch for a Metallo‐Intercalator

We report the synthesis of three new complexes related to the achiral [Ru(tpm)(dppz)py]²⁺ cation (tpm=tripyridazole methane, dppz=dipyrido[3,2‐a:2′,3′‐c]phenazine, py=pyridine) that contain an additional single functional group on the monodentate ancillary pyridyl ligand. Computational calculations indicate that the coordinated pyridyl rings are in a fixed orientation parallel to the dppz axis, and that the electrostatic properties of the complexes are very similar. DNA binding studies on the new complexes reveal that the nature and positioning of the functional group has a profound effect on the binding mode and affinity of these complexes. To explore the molecular and structural basis of these effects, circular dichroism and NMR studies on [Ru(tpm)(dppz)py]Cl₂ with the octanucleotides d(AGAGCTCT)₂ and d(CGAGCTCG)₂, were carried out. These studies demonstrate that the dppz ligand intercalates into the G²–A³ step, with {Ru(tpm)py} in the minor groove. They also reveal that the complex intercalates into the binding site in two possible orientations with the pyridyl ligand of the major conformer making close contact with terminal base pairs. We conclude that substitution at the 2‐ or 3‐position of the pyridine ring has little effect on binding, but that substitution at the 4‐position drastically disrupts intercalative binding, particularly with a 4‐amino substituent, because of steric and electronic interactions with the DNA. These results indicate that complexes derived from these systems have the potential to function as sequence‐specific light‐switch systems.     

Half-sandwich ruthenium(II)-arene complexes: synthesis,spectroscopic studies,biological properties,and molecular modeling

In search for antitumor metal-based drugs that would mitigate the severe side-effects of cisplatin, Ru(II) complexes are gaining increasing recent interest. In this work, we report on the synthesis, characterization (¹H- and ¹³C-NMR, FT-IR), and cytotoxicity studies of two new half-sandwich organometallic Ru(II) complexes of the general formula [Ru(η⁶-arene)(XY)Cl](PF₆) where arene?=?benzene or toluene and XY?=?bidentates: dipyrido[3,2-a:2′,3′-c]phenazine (dppz) or 2-(9-anthryl)-1H-imidazo[4,5-f][1,10]phenanthroline (aip), which are bound to Ru(II) via two phenanthroline-N atoms in a characteristic “piano-stool” configuration of Ru(II)-arene complexes—as confirmed by vibrational and NMR spectra. In addition, cytotoxic studies were performed for similar half-sandwich organometallic [Ru(η⁶-p-cymene)(Me₂dppz)Cl]PF₆ complex (Me₂dppz = 11,12-dimethyl-dipyrido[3,2-a:2′,3′-c]phenazine). This study is complemented with elaborate modeling with density functional theory (DFT) calculations, which provided insight into reactive sites of Ru(II) structures, further detailed by molecular docking on the B-DNA dodecamer, which identified binding sites and affinities: most pronounced for the [Ru(η⁶-benzene)(aip)Cl](PF₆) in both A-T and G-C regions of the DNA minor groove. Cytotoxic activity was probed versus tumor cell lines B16, C6, and U251 (B16 mouse melanoma, C6 rat glioma, U251 human glioblastoma) and non-tumor cell line HACAT (HACAT normal human keratinocytes).     

Photophysical Properties of Ruthenium(II) Polypyridyl DNA Intercalators: Effects of the Molecular Surroundings Investigated by Theory

The environmental effects on the structural and photophysical properties of [Ru(L)₂(dppz)]²⁺ complexes (L=bpy=2,2′‐bipyridine, phen=1,10‐phenanthroline, tap=1,4,5,8‐tetraazaphenanthrene; dppz=dipyrido[3,3‐a:2′,3′‐c]phenazine), used as DNA intercalators, have been studied by means of DFT, time‐dependent DFT, and quantum mechanics/molecular mechanics calculations. The electronic characteristics of the low‐lying triplet excited states in water, acetonitrile, and DNA have been investigated to decipher the influence of the environment on the luminescent behavior of this class of molecules. The lowest triplet intra‐ligand (IL) excited state calculated at λ≈800 nm for the three complexes and localized on the dppz ligand is not very sensitive to the environment and is available for electron transfer from a guanine nucleobase. Whereas the lowest triplet metal‐to‐ligand charge‐transfer (³MLCT) states remain localized on the ancillary ligand (tap) in [Ru(tap)₂(dppz)]²⁺, regardless of the environment, their character is drastically modified in the other complexes [Ru(phen)₂(dppz)]²⁺ and [Ru(bpy)₂(dppz)]²⁺ upon going from acetonitrile (MLCT_dppz/phen or MLCT_dppz/bpy) to water (MLCT_dppz) and DNA (MLCT_phen and MLCT_bpy). The change in the character of the low‐lying ³MLCT states accompanying nuclear relaxation in the excited state controls the emissive properties of the complexes in water, acetonitrile, and DNA. The light‐switching effect has been rationalized on the basis of environment‐induced control of the electronic density distributed in the lowest triplet excited states.     

A bis(2,2′-Bipyridine) (Dipyrido[3, 2-a:2′ 3′-c]Phenazine-N4N5) Ruthenium(II)-Based Electrochemiluminescence Biosensor for Evaluation of DNA Damage

The electrochemiluminescence of bis(2, 2′-bipyridine) (dipyrido[3, 2-a:2′ 3′-c]phenazine-N₄N₅) ruthenium(II) ([Ru(bpy)₂(dppz)]²⁺) was used to monitor deoxyribonucleic acid (DNA) charge transfer with tri-n-propylamine as a coreactant. This system was used to measure damage to DNA induced by perfluorooctanoic acid. Fifteen-base pairs of double-stranded DNA with a thiol group at the 5′ end position were covalently bonded to a gold electrode. An electrochemiluminescence sensor was then constructed by incubating the modified gold electrode in [Ru(bpy)₂(dppz)]²⁺ solution for 30 min. For comparison, single-stranded DNA, well-matched double-stranded DNA, and single base-mismatched double-stranded DNA were assembled on the gold surface. The results showed that the electrochemiluminescence behavior of the DNA sensors were unique. The electrochemiluminescence decreased when the [Ru(bpy)₂(dppz)]²⁺-DNA ECL sensor was incubated in a perfluorooctanoic acid solution. The damage to DNA caused by perfluorooctanoic acid was monitored using a combination of DNA charge transfer theory and the interaction between DNA and [Ru(bpy)₂(dppz)]²⁺. The detection limit for perfluorooctanoic acid was 1 × 10^?12 mol/L. [Ru(bpy)₂(dppz)]²⁺ was shown to be a sensitive electrochemiluminescence sensor for the determination of DNA damage.     

手性金属配合物Δ,Λ-[Ru(IP)2dppz]2＋对含G:T错配的环丁烷嘧啶二聚体识别和部分构型修复的分子力学研究

环丁烷嘧啶二聚体(Cyclobutane Pyrimidine Dimer, CPD)是紫外线对DNA损伤导致皮肤癌的首要环节, XPC-hHR23B是最早作为对CPD的损伤识别剂的, 但其识别效率很低. 本文首次采用分子力学方法模拟了一种新的手性金属配合物Δ,Λ-[Ru(IP)₂dppz]^2＋对含G:T错配的CPD双螺旋DNA的识别作用. 模拟结果显示: 金属配合物[Ru(IP)₂dppz]^2＋的两个手性异构体都对含G:T错配的CPD双螺旋DNA具有识别作用, 识别的过程体现了很强的手性选择性、沟选择性和位点特异性. 同时, 我们发现: 在Λ-[Ru(IP)₂dppz]^2＋插入到CPD后, 形成CPD的两个T碱基由原来的敞口形状部分地转为近平行状, 使其在构型上得到初步的修复.     

Ruthenium Complex “Light Switches” that are Selective for Different G‐Quadruplex Structures

Recognition and regulation of G‐quadruplex nucleic acid structures is an important goal for the development of chemical tools and medicinal agents. The addition of a bromo‐substituent to the dipyridylphenazine (dppz) ligands in the photophysical “light switch”, [Ru(bpy)₂dppz]²⁺, and the photochemical “light switch”, [Ru(bpy)₂dmdppz]²⁺, creates compounds with increased selectivity for an intermolecular parallel G‐quadruplex and the mixed‐hybrid G‐quadruplex, respectively. When [Ru(bpy)₂dppz‐Br]²⁺ and [Ru(bpy)₂dmdppz‐Br]²⁺ are incubated with the G‐quadruplexes, they have a stabilizing effect on the DNA structures. Activation of [Ru(bpy)₂dmdppz‐Br]²⁺ with light results in covalent adduct formation with the DNA. These complexes demonstrate that subtle chemical modifications of Ru^II complexes can alter G‐quadruplex selectivity, and could be useful for the rational design of in vivo G‐quadruplex probes.     

一个嫁接有羧酸羟基乙基酯的二吡啶吩嗪Ru(II)配合物的合成、与DNA的相互作用以及溶剂变色性质的研究

合成并表征了一个新的Ru(II)配合物[Ru(bpy)₂(hedppc)](ClO₄)₂ {bpy＝2,2'-联吡啶, hedppc＝二联吡啶[3,2-a: 2',3'-c]吩嗪-11-羧酸(2-羟乙基)酯}. 通过紫外-可见吸收光谱、与溴化乙锭竞争实验、粘度测量和DNA裂解实验研究了配合物与小牛胸腺DNA的相互作用性质. 结果表明配合物以插入模式与DNA键合,键合常数K_b＝(6.99±1.34)×10⁶ mol^－1•L (s＝2.03±0.04)与母体配合物[Ru(bpy)₂ (dppz)]^2＋相近,但光致发光和溶剂变色等光学性质与[Ru(bpy)₂ (dppz)]^2＋有明显的差别.     

Switching the Mechanism of NADH Photooxidation by Supramolecular Interactions

A series of three Ru(II) polypyridine complexes was investigated for the selective photocatalytic oxidation of NAD(P)H to NAD(P)⁺ in water. A combination of (time-resolved) spectroscopic studies and photocatalysis experiments revealed that ligand design can be used to control the mechanism of the photooxidation: For prototypical Ru(II) complexes a ¹O₂ pathway was found. Rudppz ([(tbbpy)₂Ru(dppz)]Cl₂, tbbpy=4,4'-di-tert-butyl-2,2'-bipyridine, dppz=dipyrido[3,2-a:2′,3′-c]phenazine), instead, initiated the cofactor oxidation by electron transfer from NAD(P)H enabled by supramolecular binding between substrate and catalyst. Expulsion of the photoproduct NAD(P)⁺ from the supramolecular binding site in Rudppz allowed very efficient turnover. Therefore, Rudppz permits repetitive selective assembly and oxidative conversion of reduced naturally occurring nicotinamides by recognizing the redox state of the cofactor under formation of H₂O₂ as additional product. This photocatalytic process can fuel discontinuous photobiocatalysis.     

Cobalt(III), nickel(II) and ruthenium(II) complexes of 1,10-phenanthroline family of ligands: DNA binding and photocleavage studies

DNA binding and photocleavage characteristics of a series of mixed-ligand complexes of the type [M(phen)₂LL]ⁿ⁺ (where M = Co(III), Ni(II) or Ru(II), LL = 1,10-phenanthroline (phen), phenanthroline-dione (phen-dione) or dipyridophenazine (dppz) andn = 3 or 2) have been investigated in detail. Various physico-chemical and biochemical techniques including UV/Visible, fluorescence and viscometric titration, thermal denaturation, and differential pulse voltammetry have been employed to probe the details of DNA binding by these complexes; intrinsic binding constants (K _b) have been estimated under a similar set of experimental conditions. Analysis of the results suggests that intercalative ability of the coordinated ligands varies as dppz>phen>phen-dione in this series of complexes. While the Co(II) and Ru(II) complexes investigated in this study effect photocleavage of the supercoiled pBR 322 DNA, the corresponding Ni(II) complexes are found to be inactive under similar experimental conditions. Results of detailed investigations carried out inquiring into the mechanistic aspects of DNA photocleavage by [Co(phen)₂(dppz)]³⁺ have also been reported.     

Ruthenium(II) Complexes with Three Different Diimine Ligands

The synthesis of tri-heteroleptic complex of Ru(II) with diimine ligands is describe. Ten compounds [Ru(R₂bpy) (biq) (L)][PF₆]₂ (R = H, CH₃); L = 2,2′-bipyridine (bpy), 4,4′-dimethyl-2,2′-bipyridine (Me₂bpy), 2,2′-bipyrimidine (bpm), 2,2′-biisoquinoline (biiq), 1,10-phenanthroline (phen), dipyrido[3,2-c:2′,3′-e]pyridazine (taphen), 2,2′-biquinoline (biq), 6,7-dihydrodipyrido[2,3-b:3,2-j][1,10]-phenanthroline (dinapy), 2-(2[pyridyl)quinoline (pq), 1-(2-pyrimidyl)pyrazole] (pzpm), 2,2′-biimidazole (H₂biim) are characterized by elemental analysis, electronic and ¹H-NMR spectroscopy. The relative photosustitution rates of biq in MeCN are given at three temperatures.     

Investigation of DNA Pesticide Interactions by Sensitive Electrochemiluminescence Method

A solid-state [Ru(bpy)₂(dppz)]²⁺ (bpy = 2,2′-bipyridine, dppz = dipyrido[3,2-a: 2′,3′-c]phenazine) electrochemiluminescence (ECL) biosensor for studying the binding interactions between pesticides of heterocyclic polycyclic aromatic hydrocarbon (heteroPAH) and natural double-stranded DNA (ds-DNA) was constructed. Layer-by-layer films of negatively charged natural ds-DNA and polycationic poly (diallyldimethylammonium chloride) (PDDA) were assembled on the surface of a glassy carbon electrode (GCE). The complex of [Ru(bpy)₂(dppz)]²⁺ was used as a probe. Tripropylamine (TPA) was used as an electron donor to chemically amplify the ECL intensity of the probe. If the xenobiotic molecules compete with the probe for the same site on the DNA film, it would displace the probe from the DNA to decrease the ECL signal. The interactions of DNA with three pesticide molecules, quinalphos, quinclorac and carbendazim, were studied. From the displacement curve, the values of binding constant K _b of three pesticides to DNA is determined, which is in the range of 0.5 × 10⁴ to 2.3 × 10⁴ M^?1.     

Large branched alkylthienyl bridged naphtho[1,2-c:5,6-c′]bis[1,2,5]thiadiazole-containing low bandgap copolymers: Synthesis and photovoltaic application

Two donor-acceptor (D-A) type low bandgap (LBG) alternating conjugated copolymers containing larger conjugation planarity and stronger electro-withdrawing ability naphtho[1,2-c:5,6-c′]bis[1,2,5]thiadiazole (NT) unit, namely, poly[4,8-bis(5-(n-octylthio)thien-2-yl)-benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl-alt-4,9-bis(4-(2-decyltetradecyl)thien-2-yl)naphtho- [1,2-c:5,6-c′]bis[1,2,5]thiadiazole-5,5′-diyl] (PBDT-TS-DTNT-DT) and poly[4,8-bis(triiso-propylsilylethynyl)benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl-alt-4,9-bis(4-(2-decyltetradecyl)-thien-2-yl)naphtho[1,2-c:5,6-c′]bis[1,2,5]thiadiazole-5,5′-diyl] (PBDT-TIPS-DTNT-DT), were prepared by the palladium-catalyzed Stille polycondensation and characterized by gel permeation chromatography (GPC), UV-Vis absorption, thermal gravimetric analysis (TGA), cyclic voltammetry (CV) etc. PBDT-TS-DTNT-DT and PBDT-TIPS-DTNT-DT show the broader absorption and deeper highest occupied molecular orbital (HOMO) energy level approximately ?5.45 and ?5.62 eV, respectively. Bulk-heterojuction solar cells based on the resulted polymers and [6,6] phenyl-C₆₁ butyric acid methyl ester (PC₆₁BM) blends, with the device configuration of ITO/PFN/polymer:PC₆₁BM/MoO₃/Ag were prepared and investigated. The results showed the power conversion efficiency (PCE) of 2.67% for PBDT-TS-DTNT-DT/PC₆₁BM (w:w, 1:2) and 0.64% for PBDT-TIPS-DTNT-DT/PC₆₁BM (w:w, 1:1), with relatively high open-circuit voltage (V_OC) of 0.86 and 1.05 V, small short-circuit current (J_SC) of 5.41 and 0.97 mA cm^?2 and moderate fill factor (FF) of 57.8% and 62.4%, under an AM1.5 simulator (100 mWcm^?2), respectively.