静电组装金纳米粒子制备局域表面等离子体共振传感膜

采用聚电解质自组装技术制备局域表面等离子体共振(LSPR)传感膜的方法, 在玻璃基片上依次沉积聚电解质PDDA, PSS和PVTC, 并通过静电吸附构建胶体金纳米粒子自组装膜形成LSPR传感膜. 利用扫描电镜对LSPR传感膜表面形貌以及膜中金纳米粒子的粒径进行了表征, 同时通过紫外-可见消光光谱对其灵敏度和渗透深度等重要参数进行检测. 研究结果表明, 所制备的LSPR传感膜粒子分布均匀、单分散性好、稳定性高、重现性好; 消光峰位对样品溶液折射率的检测灵敏度为71 nm/RIU, 相应的峰强检测灵敏度为0.21 AU/RIU, 对表面吸附层的渗透深度约为16 nm.     

Recent advances in analytical and bioanalysis applications of noble metal nanorods

In the last decade the use of anisotropic nanoparticles in analytical and bioanalytical applications has increased substantially. In particular, noble metal nanorods have unique optical properties that have attracted the interest of many research groups. The localized surface plasmon resonance (LSPR) generated by interaction of light at a specific wavelength with noble metal nanoparticles was found to depend on particle size and shape and on the constituting material and the surrounding dielectric solution. Because of their anisotropic shape, nanorods are characterized by two LSPR peaks: the transverse, fixed at approximately 530 nm, and the longitudinal, which is in the visible–near infra-red region of the spectrum and varies with nanorod aspect ratio. The intense surface plasmon band enables nanorods to absorb and scatter light in the visible and near infra-red regions, and fluorescence and two-photon induced luminescence are also observed. These optical properties, with the reactivity towards binding events that induce changes in the refractive index of the surrounding solution, make nanorods a useful tool for tracking binding events in different applications, for example assembly, biosensing, in-vivo targeting and imaging, and single-molecule detection by surface-enhanced Raman spectroscopy. This review presents the promising strategies proposed for functionalizing gold nanorods and their successful use in a variety of analytical and biomedical applications.     

Chemical sensing and imaging with metallic nanorods

In this Feature Article, we examine recent advances in chemical analyte detection and optical imaging applications using gold and silver nanoparticles, with a primary focus on our own work. Noble metal nanoparticles have exciting physical and chemical properties that are entirely different from the bulk. For chemical sensing and imaging, the optical properties of metallic nanoparticles provide a wide range of opportunities, all of which ultimately arise from the collective oscillations of conduction band electrons ("plasmons") in response to external electromagnetic radiation. Nanorods have multiple plasmon bands compared to nanospheres. We identify four optical sensing and imaging modalities for metallic nanoparticles: (1) aggregation-dependent shifts in plasmon frequency; (2) local refractive index-dependent shifts in plasmon frequency; (3) inelastic (surface-enhanced Raman) light scattering; and (4) elastic (Rayleigh) light scattering. The surface chemistry of the nanoparticles must be tunable to create chemical specificity, and is a key requirement for successful sensing and imaging platforms.     

Preliminary Recognition of c-Myc Gene Protein Using an Optical Biosensor with Gold Colloid Nanoparticles Based on Localized Surface Plasmon Resonance

Abstract

The gold colloidal nanoparticles with a diameter of 24 ± 0.2 nm were prepared, characterized by ultraviolet–visible (UV-vis), transmission electron microscopy (TEM), and cyclic voltammetry, and assembled on a gold plate substrate for constructing an optical nanobiosensor. The nanosensor exhibited distinct optical properties of localized surface plasmon resonance (LSPR), which could be used for recognition of oncogene biomolecules such as the c-Myc (3C7) antibody protein. The LSPR nanobiosensor has also been successfully applied to determination of a pCMV-Myc mammalian expression vector, one kind of DNA plasmids with a linear response range of 6.2–20.0 ng/µL and a detection limit of 2.4 ng/µL.     

Biodegradable Gold Nanovesicles with an Ultrastrong Plasmonic Coupling Effect for Photoacoustic Imaging and Photothermal Therapy

The hierarchical assembly of gold nanoparticles (GNPs) allows the localized surface plasmon resonance peaks to be engineered to the near‐infrared (NIR) region for enhanced photothermal therapy (PTT). Herein we report a novel theranostic platform based on biodegradable plasmonic gold nanovesicles for photoacoustic (PA) imaging and PTT. The disulfide bond at the terminus of a PEG‐b‐PCL block‐copolymer graft enables dense packing of GNPs during the assembly process and induces ultrastrong plasmonic coupling between adjacent GNPs. The strong NIR absorption induced by plasmon coupling and very high photothermal conversion efficiency (η=37 %) enable simultaneous thermal/PA imaging and enhanced PTT efficacy with improved clearance of the dissociated particles after the completion of PTT. The assembly of various nanocrystals with tailored optical, magnetic, and electronic properties into vesicle architectures opens new possibilities for the construction of multifunctional biodegradable platforms for biomedical applications.     

Pure surface plasmon resonance enhancement of the first hyperpolarizability of gold core-silver shell nanoparticles

We report the optical second harmonic (SH) response from gold core-silver shell nanoparticles supported at a liquid-liquid interface in the spectral region where the second harmonic generation (SHG) frequency is resonant with the surface plasmon (SP) resonance excitation of the nanoparticles. We compare these results with that obtained by classical linear optical absorption spectroscopy and show that the nonlinear optical response is dominated by the SP resonance enhancement with negligible contributions from the interband transitions. As a result, the SH spectrum exhibits two clear SP resonance bands attributed to the two SP resonances of the composite nanostructure formed by the gold core-silver shell nanoparticles. Absolute values of the hyperpolarizabilities are measured by hyper Rayleigh scattering (HRS) and compared that of pure gold nanoparticles. The hyperpolarizability measured at a harmonic energy of 3.0 eV, enhanced through excitation of the high energy SP resonance of the nanoparticle, increases with the silver content whereas the hyperpolarizability measured at a harmonic energy of 2.4 eV, enhanced through the excitation of the low energy SP resonance of the nanoparticle, decreases because of the shift of this resonance away from the harmonic frequency. The hyperpolarizability determined by HRS and the square root of the SHG intensities, scaling with the nanoparticle hyperpolarizability, have similar trends with respect to the silver content indicative of closely related adsorption properties yielding similar surface concentrations at the liquid-liquid interface.     

基于局域表面等离子体共振效应的光学生物传感器*

贵金属纳米粒子表现出许多常规块体材料所不具备的优异性能,其中局域表面等离子体共振 (LSPR) 特性是研究热点之一。LSPR 的形状和位置与纳米粒子的组成、大小、形状、介电性质以及局域介质环境密切相关。基于这一特性,贵金属纳米粒子已广泛应用于光学生物传感器、光过滤器和表面增强光谱等领域。本文对各种结构的贵金属纳米粒子的制备方法及其在光学生物传感器中的应用进行了综述,并对 LSPR 纳米传感器的未来发展前景做了展望。     

Preparation and nonlinear optical properties of Au nanoparticles doped TiO2 thin films

Nano-sized noble metal nanoparticles doped dielectric composite films with large third-order nonlinear susceptibility due to the confinement and the enhancement of local field were considered to be applied for optical information processing devices, such as optical switch or all optical logical gates. In this paper, sol–gel titania thin films doped with gold nanoparticles (AuNPs, ~10 nm in average size) were prepared. AuNPs were firstly synthesized from HAuCl₄ in aqueous solution at ~60 °C, using trisodium citrate as the reducing agent, polyvinylpyrrolidone as the stable agent; then the particle size and optical absorption spectra of the AuNPs in aqueous solutions were characterized by transmitting electron microscopy and UV–Vis–NIR spectrometry. Sol–gel 2AuNPs–100TiO₂ (in %mol) thin films (5 layers, ~1 μm in thickness) were deposited on silica glass slides by multilayer dip-coating. After heat-treated at 300–1,000 °C in air, the AuNPs–TiO₂ thin films were investigated by X-ray diffraction, scanning electron microscopy and atomic force microscopy. The nonlinear optical properties of the AuNPs–TiO₂ thin films were measured with the Z-scan technique, using a femtosecond laser (200 fs) at the wavelength of 800 nm. The third-order nonlinear refractive index and nonlinear absorption coefficient of 2AuNPs–100TiO₂ films were at the order of 10^?12 cm²/W, and the order of 10^?6 cm/W, respectively, and the third-order optical nonlinear susceptibility χ⁽³⁾ was ~6.88 × 10^?10 esu.     

Gold films deposited over regular arrays of polystyrene nanospheres as highly effective SERS substrates from visible to NIR

Gold nanostructured films of various thicknesses (15, 30, and 60 nm) are deposited over regular arrays of polystyrene nanospheres in an attempt to evaluate their potential as SERS-active substrates. Atomic force microscopy is used to topographically characterize the substrates as well as to ensure the thickness of the deposited gold films. The optical response of the prepared substrates recommends their use in SERS experiments with multiple laser lines from visible and NIR spectral domains. The assessment of the substrates' SERS activity is performed by using the 532, 633, and 830 nm excitation lines and different average enhancement factor (EF) values are obtained depending on the film thickness and employed laser line. The 60 nm gold nanostructured film generates the greatest local electromagnetic field confinement under NIR excitation and consequently gives rise to maximum SERS enhancement. The large tunability of surface plasmon excitation combined with the advantage of relatively high exhibited average EF values obtained under NIR excitation recommends these substrates as outstanding candidates for upcoming investigations of biological relevant molecules.     

Surface-enhanced Raman scattering: realization of localized surface plasmon resonance using unique substrates and methods

Surface-enhanced Raman scattering (SERS) enhancement and the reproducibility of the SERS signal strongly reflect the quality and nature of the SERS substrates because of diverse localized surface plasmon resonance (LSPR) excitations excited at interstitials or sharp edges. LSPR excitations are the most important ingredients for achieving huge enhancements in the SERS process. In this report, we introduce several gold and silver nanoparticle-based SERS-active substrates developed solely by us and use these substrates to investigate the influence of LSPR excitations on SERS. SERS-active gold substrates were fabricated by immobilizing colloidal gold nanoparticles on glass slides without using any surfactants or electrolytes, whereas most of the SERS-active substrates that use colloidal gold/silver nanoparticles are not free of surfactant. Isolated aggregates, chain-like elongated aggregates and two-dimensional (2D) nanostructures were found to consist mostly of monolayers rather than agglomerations. With reference to correlated LSPR and SERS, combined experiments were carried out on a single platform at the same spatial position. The isolated aggregates mostly show a broadened and shifted SPR peak, whereas a weak blue-shifted peak is observed near 430 nm in addition to broadened peaks centered at 635 and 720 nm in the red spectral region in the chain-like elongated aggregates. In the case of 2D nanostructures, several SPR peaks are observed in diverse frequency regions. The characteristics of LSPR and SERS for the same gold nanoaggregates lead to a good correlation between SPR and SERS images. The elongated gold nanostructures show a higher enhancement of the Raman signal than the the isolated and 2D samples. In the case of SERS-active silver substrates for protein detection, a new approach has been adopted, in contrast to the conventional fabrication method. Colloidal silver nanoparticles are immobilized on the protein functionalized glass slides, and further SERS measurements are carried out based on LSPR excitations. A new strategy for the detection of biomolecules, particularly glutathione, under aqueous conditions is proposed. Finally, supramolecular J-aggregates of ionic dyes incorporated with silver colloidal aggregates are characterized by SERS measurements and correlated to finite-difference time-domain analysis with reference to LSPR excitations. Figure SPR and SERS images for isolated, elongated and two-dimensional gold nanostructures     

Gold Nanorods as Contrast Agents for Biological Imaging: Optical Properties,Surface Conjugation and Photothermal Effects†

Gold nanorods (NRs) have plasmon‐resonant absorption and scattering in the near‐infrared (NIR) region, making them attractive probes for in vitro and in vivo imaging. In the cellular environment, NRs can provide scattering contrast for darkfield microscopy, or emit a strong two‐photon luminescence due to plasmon‐enhanced two‐photon absorption. NRs have also been employed in biomedical imaging modalities such as optical coherence tomography or photoacoustic tomography. Careful control over surface chemistry enhances the capacity of NRs as biological imaging agents by enabling cell‐specific targeting, and by increasing their dispersion stability and circulation lifetimes. NRs can also efficiently convert optical energy into heat, and inflict localized damage to tumor cells. Laser‐induced heating of NRs can disrupt cell membrane integrity and homeostasis, resulting in Ca²⁺ influx and the depolymerization of the intracellular actin network. The combination of plasmon‐resonant optical properties, intense local photothermal effects and robust surface chemistry render gold NRs as promising theragnostic agents.     

Influence of particle size on the binding activity of proteins adsorbed onto gold nanoparticles

We used optical extinction spectroscopy to study the structure of proteins adsorbed onto gold nanoparticles of sizes 5-60 nm and their resulting biological binding activity. For these studies, proteins differing in size and shape, with well-characterized and specific interactions-rabbit immunoglobulin G (IgG), goat anti-rabbit IgG (anti-IgG), Staphylococcal protein A, streptavidin, and biotin-were used as model systems. Protein interaction with gold nanoparticles was probed by optical extinction measurements of localized surface plasmon resonance (LSPR) of the gold nanoparticles. Binding of the ligands in solution to protein molecules already immobilized on the surface of gold causes a small but detectable shift in the LSPR peak of the gold nanoparticles. This shift can be used to probe the binding activity of the adsorbed protein. Within the context of Mie theory calculations, the thickness of the adsorbed protein layer as well as its apparent refractive index is shown to depend on the size of the gold nanoparticle. The results suggest that proteins can adopt different orientations that depend on the size of the gold nanospheres. These different orientations, in turn, can result in different levels of biological activity. For example, we find that IgG adsorbed on spheres with diameter ≥20 nm does not bind to protein A. This study illustrates the principle that the size of nanoparticles can strongly influence the binding activity of adsorbed proteins. In addition to the importance of this in cases of direct exposure of proteins to nanoparticles, the results have implications for proteins adsorbed to materials with nanometer scale surface roughness.     

Optimization of plasmonic enhancement of fluorescence on plastic substrates

In this work, we report on the uniform deposition of tailored plasmonic coatings on polymer substrates and on the distance dependence of the plasmonic enhancement of a fluorescent dye. Silver, gold, and silver/gold alloy nanoparticles (NPs) with a range of diameters were synthesized using chemical techniques and characterized using UV-vis absorption spectroscopy, transmission electron microscopy (TEM), and atomic force microscopy (AFM). Reproducible polyelectrolyte (PEL) layers, which were deposited on plastic microwell plates using a layer-by-layer technique, served as both a stable and uniform substrate for deposition of the NPs as well as providing spacer layers of known thickness between the NPs and the fluorescent dye. A maximum enhancement factor of approximately 11 was measured for 60 nm diameter pure silver NPs, for a dye-NP separation of approximately 3 nm. A shift in the localized surface plasmon resonance (LSPR) wavelength as a function of the effective refractive index of the PEL layers was also observed, and the measured shifts show a similar trend with theoretical predictions. This work will contribute toward the rational design of optical biochip platforms based on plasmon-enhanced fluorescence.     

二元混合表面活性剂用于窄吸收金纳米棒的无种子合成

利用十六烷基三甲基溴化铵(CTAB)和油酸钠(NaOL)二元混合表面活性剂体系, 开发了一种高质量金纳米棒(AuNRs)的无种子合成方法. 通过透射电子显微镜(TEM)、 紫外-可见-近红外吸收光谱(UV-Vis-NIR)和热成像仪对金纳米棒的形貌、 光学性质及光热性能进行了表征. 实验结果表明, 当NaOL浓度为8.21~11.5 mmol/L时, 能够获得形貌均匀的AuNRs, 其纵向表面等离子体共振吸收(LSPR)在650~1150 nm范围内可调. 该方法制得的样品具有较窄的LSPR半峰宽, 特别是在制备LSPR在近红外二区(NIR-II, 大于1000 nm)的AuNRs方面具有明显优势. 在1064 nm激光的辐照下, 金纳米棒溶液能够快速升温至67 ℃, 光热转换效率可达31.5%, 同时表现出优秀的光热稳定性, 在近红外二区光声成像和光热治疗方面具有良好的应用价值.     

Application of the localized surface plasmon resonance of gold nanoparticles for the determination of 1,1-dimethylhydrazine in water: Toward green analytical chemistry

Localized surface plasmon resonance (LSPR) is an optical phenomena generated by light when it interacts with conductive nanoparticles that are smaller than the incident wavelength. In this work, we proposed a simple, fast, and green method for spectrophotometric determination of unsymmetrical 1,1-dimethylhydrazine (UDMH) based on LSPR property of gold nanoparticles (AuNPs). An LSPR band is produced via reduction of Au³⁺ ions in solution by UDMH as active reducing agent in the presence of cetyltrimethylammonium chloride as a capping agent. Some important parameters in the formation of LSPR including Au(III) concentration, pH, concentration of stabilizer, and reaction time were studied and optimized. Under optimum conditions, the LSPR intensity displays linear response with the increasing UDMH concentration in the range from 0.5–10 μg/mL at 550 nm with a detection limit of 0.2 μg/mL. Also, the relative standard deviation for ten replicate determination of 5.0 μg/mL of UDMH was 3%. Usage of AuNPs as new nontoxic reagent instead of hazardous reagents in the spectrophotometric determination of UDMH is a step toward green analytical chemistry. The proposed method was successfully applied for determination of UDMH in water and wastewater samples.     

Measurement of antibody binding to protein immobilized on gold nanoparticles by localized surface plasmon spectroscopy

Antibody binding to bovine serum albumin (BSA) and human serum albumin (HSA) immobilized onto gold nanoparticles was studied by means of localized surface plasmon resonance (LSPR) spectroscopy. Amine-modified glass was prepared by self-assembly of amine-terminated silane on substrate, and gold (Au) nanoparticles were deposited on the amine-modified glass substrate. Au nanoparticles deposited on the glass surface were functionalized by BSA and HSA. BSA immobilization was confirmed by LSPR spectroscopy in conjunction with surface-enhanced Raman scattering spectroscopy. Then, LSPR response attributable to the binding of anti-BSA and anti-HSA to BSA- and HSA-functionalized Au nanoparticles, respectively, was examined. Anti-HSA at levels larger than ∼10 nM could be detected by HSA-immobilized chips with LSPR optical response, which was saturated at concentrations greater than ∼650 nM of anti-HSA. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible to authorized users.     

一步法制备二氧化钛-金复合材料及其光解水制氢性能

以钛粉为还原剂,氯金酸为氧化剂,将二者在180 ℃水热反应釜中发生氧化还原反应,最终生成直径800 nm左右的TiO₂,比表面积为3.5 m²/g左右,其表面均匀担载了直径20 nm左右的金纳米颗粒。 采用X射线衍射(XRD)、场发射扫描电子显微镜(FE-SEM)、X射线光电子能谱分析(XPS)、紫外可见漫反射光谱、光电流密度、光催化制氢性能等测试表征了该复合催化剂的结构及性能。 结果表明,一步法制备的复合催化剂形貌规整,TiO₂为锐钛矿晶型,金纳米颗粒的局域表面等离子体共振(LSPR)作用促进了催化剂对可见光有较强的吸收,催化剂催化产氢性能伴随金含量增大存在先增后减规律,可见光下最大产氢速率为0.1 μmol/(g·h),光催化活性表现稳定。     

Plasmonic enhancement of gold nanoparticles on photocycloreversion reaction of diarylethene derivatives depending on particle size, distance from the particle surface, and irradiation wavelength

We newly synthesized various sized gold nanoparticles covered with photochromic polymers consisting of diarylethenes with various structures to investigate an effect of the gold nanoparticles on the photocycloreversion reaction of the diarylethene chromophores upon irradiation with visible light. The gold nanoparticles covered with the photochromic polymers exhibited reversible changes in localized surface plasmon resonance (LSPR) absorption along with the photochromic reaction depending on the diameter of the particle, the distance between the gold surface and the chromophore, and the structure of the diarylethene chromophore. The rate of the photocycloreversion reaction of the chromophores around the particle was enhanced by the gold nanoparticles and the degree of the enhancement was affected by the diameter of the particle and the distance from the gold surface, while a structural difference in the diarylethene chromophore had no effect on the degree of the enhancement. The larger enhancement of the photocycloreversion reaction was observed by irradiation at longer wavelength side than visible light corresponding to the LSPR frequency.     

Au纳米粒子表面附近偶氮苯分子的吸收光谱

我们将时空间含时密度泛函理论与经典的电动力学时空间有限差分技术相结合,对吸附在Au纳米粒子表面附近的偶氮苯分子顺式和反式两种同分异构体的光学性质进行了研究。计算结果显示,一方面表面等离子激元共振会增大其周围激光外场的强度,从而使得偶氮苯分子的吸收光谱得到增强,另一方面,吸附分子与金属纳米粒子之间的相互耦合作用也会对一些低能特殊谱峰的强度及位置产生影响,从而使得谱线的形状与单独的偶氮苯分子或Au纳米粒子并不相同。此外,等离子激元的增强效应会随着分子与金属纳米粒子之间的距离以及纳米粒子尺寸的变化而发生变化。     

Plasmon coupling of R6G-linked gold nanoparticle assemblies for surface-enhanced Raman spectroscopy

This paper presents the study of surface-enhanced Raman scattering (SERS) for Rhodamine 6G (R6G)-linked gold (Au) assemblies. The nano-assemblies fabricated with Au nanoparticles, having diameters (D) of ～5–40 nm, possessed interparticle gaps of ～0.03–0.2D, respectively. The R6G-linked Au assemblies displayed weak spectral shifts of localized surface plasmon resonance (LSPR) mode at shorter wavelength region and large fractional red-shifts Δλ ～ 0.07–0.47λ_o at longer wavelength region. The resonant spectral coupling of the nano-assemblies LSPR mode at the longer wavelength region and the optical excitation at ～785 nm, in addition to the highly localized hot spots, could support the large SERS enhancement of R6G-linked Au assemblies.