Synthesis of 1,6-didecylnaphtho[1,2-b:5,6-b']difuran-based copolymers by direct heteroarylation polymerization

The use of direct C H arylation cross-coupling polymerization was evaluated for the synthesis of donor–acceptor conjugated co-polymers using the novel donor 1,6-didecylnaphtho[1,2-b:5,6-b']difuran and either thieno[3,4-c]pyrrole-4,6-dione (TPD) or 1,4-diketopyrrolo[3,4-c]pyrrole (DPP) as the acceptor. Thiophene and furan moieties were used to flank the DPP group and the impact of these heterocycles on the polymers' properties was evaluated. The alkyl chains on the diketopyrrolopyrrole monomers were varied to engineer the solubility and morphology of the materials. All of the polymers have similar optoelectronic properties with narrow optical band gaps around 1.3 eV, which is ideal for solar energy harvesting. Unfortunately, these polymers also had high-lying highest occupied molecular orbital levels of −4.8 to −5.1, and as a result bulk-heterojunction photovoltaic cells fabricated using the soluble fullerene derivative PC₇₁BM as the electron-acceptor and these polymers as donor materials exhibited poor performance due to limited V_oc values. An examination of the films from these blends indicates that film-thickness and morphology were also a major hindrance to performance and a potential point of improvement for future materials.     

Novel Metal Complexes Unit of Phenanthroline Derivative for Being Used as Auxiliary Electron Acceptor in Dye Sensitizer Molecules

Donor-acceptor-π bridge-acceptor (D−A−π−A) motif dyes are promising dye sensitizers in dye-sensitized solar cells (DSSCs). In this study, to strengthen with-drawing electron force of the auxiliary electron acceptors(A) in D−A−π−A motif dye sensitizers, the metal complexes unit is be used as auxiliary electron acceptor(A) instead of organic electron-withdrawing monomer. The four polymeric metal complexes were designed, synthesized, and characterized, which used metal complexes of phenanthroline derivatives as auxiliary acceptors (A), benzodithiophene-dithiophene derivatives (BDTT) as donors (D), and 8-hydroxyquinoline derivatives as π-bridges and acceptors of the dye sensitizers, and have been used for dye sensitizers. Under AM 1.5 G (100 mW cm⁻²), the photovoltaic test results indicated that the short-circuit photocurrent density (J_sc) of the DSSCs based four polymeric metal complexes are 11.26, 13.68, 14.42 and 15.57 mA cm⁻² and power conversion efficiency (PCE) are 5.96 %, 7.83 %, 8.07 %, 9.28 % respectively. Both J_sc and PCE value of the four polymeric metal complexes increased in order. This may be due to the fact that larger radius of metal ion under the same change number can enhance the coordination bond and cause stronger electron-withdrawing ability of auxiliary acceptor and stronger charge-transfer ability between the donor and the acceptor, which results in higher J_sc and higher PCE of the polymeric complex dye sensitizer.     

Indandione-Terminated Quinoidal Compounds for Low-Bandgap Small Molecules with Strong Near-Infrared Absorption: Effect of Conjugation Length on the Properties

Low-bandgap organic semiconductors have attracted much attention for their multiple applications in optoelectronics. However, the realization of narrow bandgap is challenging particularly for small molecules. Herein, we have synthesized four quinoidal compounds, i. e., QSN3 , QSN4 , QSN5 and QSN6 , with electron rich S,N-heteroacene as the quinoidal core and indandione as the end-groups. The optical bandgap of the quinoidal compounds is systematically decreased with the extension of quinoidal skeleton, while maintaining stable closed-shell ground state. QSN6 absorbs an intense absorption in the first and second near-infrared region in the solid state, and has extremely low optical bandgap of 0.74 eV. Cyclic voltammetry analyses reveal that the lowest unoccupied molecular orbital (LUMO) energy levels of the four quinoidal compounds all lie below −4.1 eV, resulting in good electron-transporting characteristics in organic thin-film transistors. These results demonstrated that the combination of π-extended quinoidal core and end-groups in quinoidal compounds is an effective strategy for the synthesis of low-bandgap small molecules with good stability.     

A Three‐dimensional Non‐fullerene Small Molecule Acceptor for Solution‐processed Organic Solar Cells

An acceptor‐donor‐acceptor (A‐D‐A) three‐dimensional (3D ) small molecule acceptor (SFTTIC ), using spirobifluorene as the core unit linking with four thieno[3,2‐b ]thiophenes (TT ) and end‐capped with 2‐(3‐oxo ‐2,3‐dihydro‐1H ‐inden‐1‐ylidene)malononitrile (INCN ) was developed for solution processed organic solar cells. SFTTIC has a high absorption coefficient up to 3.12 × 10⁵ mol⁻¹•cm⁻¹, good thermal stability and appropriate energy levels. The optimized power conversion efficiency (PCE ) of 5.66% and 4.65% was achieved for the devices with PBDB ‐T:SFTTIC and PTB7 ‐Th:SFTTIC , respectively.     

New D‐A‐A’‐Configured Small Molecule Donors Employing Conjugation to Red‐shift the Absorption for Photovoltaics

Four new donor‐acceptor‐acceptor’ (D‐A‐A’)‐configured donors, CPNT , DCPNT , CPNBT , and DCPNBT equipped with naphtho[1,2‐c:5,6‐c′]bis([1,2,5]‐thiadiazole) (NT) or naphtho[2,3‐c][1,2,5]thiadiazole (NBT) as the central acceptor (A) unit bridging triarylamine donor (D) and cyano or dicyanovinylene acceptor (A’), were synthesized and characterized. All molecules exhibit bathochromic absorption shifts as compared to those of the benzothiadiazole (BT)‐based analogues owing to improved electron‐withdrawing and quinoidal character of NT and NBT cores that lead to stronger intramolecular charge transfer. Favorable energy level alignments with C₇₀, together with the good thermal stability and the antiparallel dimeric packing render CPNT and DCPNT suitable donors for vacuum‐processed organic photovoltaics (OPV)s. OPVs based on DCPNT : C₇₀ active layers displayed the best power conversion efficiency (PCE)=8.3%, along with an open circuit voltage of 0.92 V, a short circuit current of 14.5 mA cm^?2 and a fill factor of 62% under 1 sun intensity, simulated AM1.5G illumination. Importantly, continuous light‐soaking with AM 1.5G illumination has verified the durability of the devices based on CPNT :C₇₀ and DCPNT : C₇₀ as the active blends. The devices were examined for their feasibility of indoor light harvesting under 500 lux illumination by a TLD‐840 fluorescent lamp, giving PCE=12.8% and 12.6%, respectively. These results indicate that the NT‐based D‐A‐A’‐type donors CPNT and DCPNT are potential candidates for high‐stability vacuum‐processed OPVs suitable for indoor energy harvesting.     

Indandione-Terminated Quinoids: Facile Synthesis by Alkoxide-Mediated Rearrangement Reaction and Semiconducting Properties

A series of 1,3-indandione-terminated π-conjugated quinoids were synthesized by alkoxide-mediated rearrangement reaction of the respective alkene precursors, followed by air oxidation. This new protocol allows access to quinoidal compounds with variable termini and cores. The resulting quinoids all show LUMO levels below −4.0 eV and molar extinction coefficients above 10⁵ L mol⁻¹ cm⁻¹. The optoelectronic properties of these compounds can be regulated by tuning the central cores as well as the aryl termini ascribed to the delocalized frontier molecular orbitals over the entire molecular skeleton involving aryl termini. n-Channel organic thin-film transistors with electron mobility of up to 0.38 cm² V⁻¹ s⁻¹ were fabricated, showing the potential of this new class of quinoids as organic semiconductors.     

Ionic Liquids with More than One Metal: Optical and Electrochemical Properties versus d-Block Metal Combinations

Thirteen N-butylpyridinium salts, including three monometallic [C₄Py]₂[MCl₄], nine bimetallic [C₄Py]₂[M_1−x^aM_x^bCl₄] and one trimetallic compound [C₄Py]₂[M_1−y-z^aM_y^bM_z^cCl₄] (M=Co, Cu, Mn; x=0.25, 0.50 or 0.75 and y=z=0.33), were synthesized and their structure and thermal and electrochemical properties were studied. All compounds are ionic liquids (ILs) with melting points between 69 and 93 °C. X-ray diffraction proves that all ILs are isostructural. The conductivity at room temperature is between 10⁻⁴ and 10⁻⁸ S cm⁻¹. Some Cu-based ILs reach conductivities of 10⁻² S cm⁻¹, which is, however, probably due to IL dec. This correlates with the optical bandgap measurements indicating the formation of large bandgap semiconductors. At elevated temperatures approaching the melting points, the conductivities reach up to 1.47×10⁻¹ S cm⁻¹ at 70 °C. The electrochemical stability windows of the ILs are between 2.5 and 3.0 V.     

Self-Doped n-Type Quinoidal Compounds with Good Air Stability and High Electrical Conductivity for Organic Electronics

Air stable n-type conductive molecules with high electrical conductivities and excellent device performance have important applications in organic electronics, but their synthesis remains challenging. Herein, we report three self-doped n-type conductive molecules, designated QnNs, with a closed-shell quinoidal backbone and alkyl amino chains of different lengths. The QnNs are self-doped by intermolecular electron transfer from the amino groups to the quinoidal backbone. This process is ascertained unambiguously by experiments and theoretical calculations. The use of a quinoidal structure effectively improves the self-doping level, and thus increases the electrical conductivity of self-doped n-type conductive molecules achieved by a closed-shell structure from<10⁻⁴ S cm⁻¹ to>0.03 S cm⁻¹. Furthermore, the closed-shell quinoidal structure results in good air stability of the QnNs, with half-lives>73 days; and Q4N shows an electrical conductivity of 0.019 S cm⁻¹ even after exposure to air for 120 days. When applying Q6N as the cathode interlayer in organic solar cells (OSCs), an outstanding power conversion efficiency of up to 18.2 % was obtained, which represents one the best results in binary OSCs.     

Novel Thienyl DPP derivatives Functionalized with Terminal Electron-Acceptor Groups: Synthesis,Optical Properties and OFET Performance

Three novel diketopyrrolopyrrole (DPP) based small molecules have been synthesized and characterized in terms of their chemical-physical, electrochemical and electrical properties. All the molecules consist of a central DPP electron acceptor core symmetrically functionalized with donor bi-thienyl moieties and flanked in the terminal positions by three different auxiliary electron-acceptor groups. This kind of molecular structure, characterized by an alternation of electron acceptor and donor groups, was purposely designed to provide a significant absorption at the longer wavelengths of the visible spectrum: when analysed as thin films, in fact, the dyes absorb well over 800 nm and exhibit a narrow optical bandgap down to 1.28 eV. A detailed DFT analysis provides useful information on the electronic structure of the dyes and on the features of the main optical transitions. Organic field-effect transistors (OFETs) have been fabricated by depositing the DPP dyes as active layers from solution: the different end-functionalization of the dyes had an effect on the charge-transport properties with two of the dyes acting as n-type semiconductors (electron mobility up to 4.4 ⋅ 10⁻² cm²/V ⋅ s) and the third one as a p-type semiconductor (hole mobility up to 2.3 ⋅ 10⁻³ cm²/V ⋅ s). Interestingly, well-balanced ambipolar transistors were achieved by blending the most performant n-type and p-type dyes with hole and electron mobility in the order of 10⁻³ cm²/V ⋅ s     

Modulation of electronic properties of π‐conjugated copolymers derived from naphtho[1,2‐b:5,6‐b′]dithiophene donor unit: A structure‐property relationship study

A set of three donor‐acceptor conjugated (D‐A) copolymers were designed and synthesized via Stille cross‐coupling reactions with the aim of modulating the optical and electronic properties of a newly emerged naphtho[1,2‐b:5,6‐b′]dithiophene donor unit for polymer solar cell (PSCs) applications. The PTNDTT‐BT , PTNDTT‐BTz , and PTNDTT‐DPP polymers incorporated naphtho[1,2‐b:5,6‐b′]dithiophene ( NDT ) as the donor and 2,2′‐bithiazole ( BTz ), benzo[1,2,5]thiadiazole ( BT ), and pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione ( DPP ), as the acceptor units. A number of experimental techniques such as differential scanning calorimetry, thermogravimetry, UV–vis absorption spectroscopy, cyclic voltammetry, X‐ray diffraction, and atomic force microscopy were used to determine the thermal, optical, electrochemical, and morphological properties of the copolymers. By introducing acceptors of varying electron withdrawing strengths, the optical band gaps of these copolymers were effectively tuned between 1.58 and 1.9 eV and their HOMO and LUMO energy levels were varied between ?5.14 to ?5.26 eV and ?3.13 to ?3.5 eV, respectively. The spin‐coated polymer thin film exhibited p‐channel field‐effect transistor properties with hole mobilities of 2.73 × 10^?3 to 7.9 × 10^?5 cm² V^?1 s^?1. Initial bulk‐heterojunction PSCs fabricated using the copolymers as electron donor materials and [6,6]‐phenyl C71 butyric acid methyl ester (PC₇₁BM) as the acceptor resulted in power conversion efficiencies in the range of 0.67–1.67%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2948–2958     

Quadrupolar Ultrafast Charge Transfer in Diaminoazobenzene-Bridged Perylenediimide Triads

Strong push-pull interactions between electron donor, diaminoazobenzene (azo), and an electron acceptor, perylenediimide (PDI), entities in the newly synthesized A−D−A type triads (A=electron acceptor and D=electron donor) and the corresponding A−D dyads are shown to reveal wide-band absorption covering the entire visible spectrum. Electrochemical studies revealed the facile reduction of PDI and relatively easier oxidation of diaminoazobenzene in the dyads and triads. Charge transfer reversal using fluorescence-spectroelectrochemistry wherein the PDI fluorescence recovery upon one-electron oxidation, deterring the charge-transfer interactions, was possible to accomplish. The charge transfer state density difference and the frontier orbitals from the DFT calculations established the electron-deficient PDI to be an electron acceptor and diaminoazobenzene to be an electron donor resulting in energetically closely positioned PDI ^δ− -Azo ^δ+ -PDI ^δ− quadrupolar charge-transfer states in the case of triads and Azo ^δ+ -PDI ^δ− dipolar charge-transfer states in the case of dyads. Subsequent femtosecond transient absorption spectral studies unequivocally proved the occurrence of excited-state charge transfer in these dyads and triads in benzonitrile wherein the calculated forward charge transfer rate constants, k_f, were limited to instrument response factor, meaning >10¹² s⁻¹ revealing the occurrence of ultrafast photo-events. The charge recombination rate constant, k_r, was found to depend on the type of donor-acceptor conjugates, that is, it was possible to establish faster k_r in the case of triads (∼10¹¹ s⁻¹) compared to dyads (∼10¹⁰ s⁻¹). Modulating both ground and excited-state properties of PDI with the help of strong quadrupolar and dipolar charge transfer and witnessing ultrafast charge transfer events in the studied triads and dyads is borne out from the present study.     

Theoretical Study on Zigzag Boron Nitride Nanowires

In this work, two kinds of BN-nanowires (BNnws): a-BNnw and d-BNnw, respectively composed of azo (N−N) and diboron (B−B) bonds, are proposed with the aid of the first-principles simulations. Their structural stabilities are carefully verified from the energetics, lattice dynamics, and thermodynamic perspectives. Similar to the other common boron nitride polymorph, the a-BNnw and d-BNnw are semiconductors with relatively wide band gaps of 3.256 and 4.631 eV at the HSE06 level, respectively. The corresponding projected DOS patterns point out that their band edges are composed of different atomic species, which can help with the separation of their excitons. The band gaps can be manipulated monotonically by axial strains within the elastic ranges. The major charge carriers are electron holes. Significantly, a-BNnw possesses very high carrier mobilities around 0.44×10⁴ cm² V⁻¹ s⁻¹.     

New metal free organic dyes incorporating heterocyclic Benzofuran core as conjugated spacer: Synthesis,Opto-electrochemical,DFT and DSSC studies

Synthesis of a series of new organic photosensitizers, designated as BZ1 - BZ4 , was achieved by incorporating benzofuran core as π-spacer, triphenylamine (TPA) and 4-methoxy triphenylamine (4-MeO-TPA) as donors and cyanoacrylic acid (CAA) and rhodanine-3-acetic acid (RAA) as acceptor/anchoring groups. Structurally, dyes BZ1 and BZ2 carry TPA and 4-MeO-TPA as donors, respectively, whereas CAA constitutes as a common acceptor. On the other hand, BZ3 and BZ4 incorporate TPA and 4-MeO-TPA as donors, respectively, and RAA serves as a common acceptor. Key steps to access BZ1 - BZ4 involved Wittig olefination, reduction of cyano groups to aldehyde, and finally Knoevenagel condensation. In UV–visible spectra, dyes BZ1 - BZ4 exhibited intramolecular charge transfer (ICT) maxima in the range of 503 nm to 534 nm and their extinction coefficients varied from 22,600 to 40,400 M⁻¹ cm⁻¹. Using cyclic voltammetry and UV–visible data, we calculated the optical band gaps, (E₀₋₀) of BZ1-BZ4 to be 2.09, 2.00, 2.01, and 1.93 eV, respectively. DFT studies revealed that HOMOs of dyes were localized essentially on the donors triphenylamine groups, whereas the LUMOs are largely confined over electron acceptors CAA and RAA as well as partly diffused into the benzofuran spacer. DSSCs, configured using BZ1 - BZ4 as photosensitizers, showed fill factors (ff) in the range of 0.57 to 0.76, comparable to standard N3 dye (0.67). In addition, BZ1 and BZ2 dyes with CAA as an acceptor also exhibited decent open circuit voltage (V_oc) in the range of 0.61 to 0.63 relative to the 0.66 observed for N3 dye. Dyes BZ1-BZ2 carrying CAA as an acceptor exhibited an efficiency (η) of 2.03% and 1.49%, respectively, against the benchmark N3 dye, showing η of 5.02%. Due to poor V_oc and short circuit current density (I_sc), dyes BZ3-BZ4 carrying RAA as acceptor/anchoring group performed significantly poor, showing η of 0.08%, and 0.32%, respectively.     

Solution‐Processable n‐Type Organic Field‐Effect Transistor (OFET) Materials Based on Carbonyl‐Bridged Bithiazole and Dioxocyclopentene‐Annelated Thiophenes

A series of electronegative π‐conjugated compounds composed of carbonyl‐bridged bithiazole and alkyl‐substituted dioxocyclopenta[b]thiophene were synthesized as a candidate for solution‐processable n‐type organic semiconductor materials and characterized on the basis of photophysical and electrochemical properties. Cyclic voltammetry measurements showed that the first half‐wave reduction potentials of these compounds are between −0.97 and −1.14 V versus ferrocene/ferrocenium, which corresponds to lowest unoccupied molecular orbital energy levels between −3.83 and −3.66 eV. Thanks to hexyl or dodecyl groups in the molecules, the compounds are sufficiently soluble to realize the fabrication of their thin films through a spin‐coating method. As a result, the prepared organic field‐effect transistors based on these newly developed compounds exhibited n‐channel characteristics not only under vacuum but also in air, and the best field‐effect electron mobility observed under vacuum was 0.011 cm² V⁻¹ s⁻¹ with an on/off ratio of 10⁸ and a threshold voltage of 16 V.     

Acid–Base‐Responsive Intense Charge‐Transfer Emission in Donor–Acceptor‐Conjugated Fluorophores

Herein we report on the synthesis and acid‐responsive emission properties of donor–acceptor (D–A) molecules that contain a thienothiophene unit. 2‐Arylthieno[3,2‐b]thiophenes were conjugated with an N‐methylbenzimidazole unit to form acid‐responsive D–A‐type fluorophores. The D–A‐conjugated fluorophores showed intense intramolecular charge‐transfer (ICT) emission in response to acid. The effect of the substitution on their photophysical properties as well as their solvent‐dependence indicated non‐twisting ICT emission in protonated D–A molecules. The quinoidal character of 2‐arylthienothiophene as a donor part is discussed, as it is assumed that it contributes to suppression of the molecular twisting in the excited state, therefore decreasing the nonradiative rate constant, thereby resulting in the intense ICT emission. Acid–base‐sensitive triple‐color emission was also achieved by the introduction of a base‐responsive phenol group in the donor part.     

Dithienoindophenines: p‐Type Semiconductors Designed by Quinoid Stabilization for Solar‐Cell Applications

Compared with the dominant aromatic conjugated materials, photovoltaic applications of their quinoidal counterparts featuring rigid and planar molecular structures have long been unexplored despite their narrow optical bandgaps, large absorption coefficients, and excellent charge‐transport properties. The design and synthesis of dithienoindophenine derivatives (DTIPs) by stabilizing the quinoidal resonance of the parent indophenine framework is reported here. Compared with the ambipolar indophenine derivatives, DTIPs with the fixed molecular configuration are found to be p‐type semiconductors exhibiting excellent unipolar hole mobilities up to 0.22 cm² V^?1 s^?1, which is one order of magnitude higher than that of the parent IP‐O and is even comparable to that of QQT(CN)4‐based single‐crystal field‐effect transistors (FET). DTIPs exhibit better photovoltaic performance than their aromatic bithieno[3,4‐b]thiophene (BTT) counterparts with an optimal power‐conversion efficiency (PCE) of 4.07 %.     

Electronic Tuning of Mixed Quinoidal‐Aromatic Conjugated Polyelectrolytes: Direct Ionic Substitution on Polymer Main‐Chains

The synthesis of conjugated polymers with ionic substituents directly bound to their main chain repeat units is a strategy for generating strongly electron‐accepting conjugated polyelectrolytes, as demonstrated through the synthesis of a series of ionic azaquinodimethane (iAQM) compounds. The introduction of cationic substituents onto the quinoidal para‐azaquinodimethane (AQM) core gives rise to a strongly electron‐accepting building block, which can be employed in the synthesis of ionic small molecules and conjugated polyelectrolytes (CPEs). Electrochemical measurements alongside theoretical calculations indicate notably low‐lying LUMO values for the iAQMs. The optical band gaps measured for these compounds are highly tunable based on structure, ranging from 2.30 eV in small molecules down to 1.22 eV in polymers. The iAQM small molecules and CPEs showcase the band gap reduction effects of combining the donor‐acceptor strategy with the bond‐length alternation reduction strategy. As a demonstration of their utility, the iAQM CPEs so generated were used as active agents in photothermal therapy.     

Silaindacenodithiophene‐Based Fused‐Ring Non‐Fullerene Electron Acceptor for Efficient Polymer Solar Cells

In this work, a new A‐D‐A type nonfullerene small molecular acceptor SiIDT‐IC, with a fused‐ring silaindacenodithiophene (SiIDT) as D unit and 2‐(3‐oxo‐2,3‐dihydroinden‐1‐ylidene)malononitrile (INCN) as the end A unit, was design and synthesized. The SiIDT‐IC film shows absorption peak and edge at 695 and 733 nm, respectively. The HOMO and LUMO of SiIDT‐IC are of −5.47 and −3.78 eV, respectively. Compared with carbon‐bridging, the Si‐bridging can result in an upper‐lying LUMO level of an acceptor, which is benefit to achieve a higher open‐circuit voltage in polymer solar cells (PSCs). Complementary absorption and suitable energy level alignment between SiIDT‐IC and wide bandgap polymer donor PBDB‐T were found. For the PBDB‐T:SiIDT‐IC based inverted PSCs, a D/A ratio of 1: 1 was optimal to achieve a power conversion efficiency (PCE) of 7.27%. With thermal annealing (TA) of the blend film, a higher PCE of 8.16% could be realized due to increasing of both short‐circuit current density and fill factor. After the TA treatment, hole and electron mobilities were elevated to 3.42 × 10⁻⁴ and 1.02 × 10⁻⁴ cm²·V⁻¹·s⁻¹, respectively. The results suggest that the SiIDT, a Si‐bridged fused ring, is a valuable D unit to construct efficient nonfullerene acceptors for PSCs.     

A Narrow Bandgap of 2D Ruddlesden-Popper Bilayer Perovskite with Giant Entropy Change and Photoluminescence

The multifunctional two-dimensional (2D) organic-inorganic hybrid perovskites have potential applications in many fields, such as, semiconductor, energy storage and fluorescent device etc. Here, a 2D Ruddlesden-Popper (RP) perovskite (IPA)₂(FA)Pb₂I₇ ( 1 , IPA⁺=C₃H₉NI⁺, FA⁺=CN₂H₅⁺) is determined for its photophysical properties. Strikingly, 1 reveals a solid reversible phase transition with T_c of 382 K accompanied by giant entropy change of 40 J mol⁻¹ K⁻¹. Further optical investigations indicate that 1 reveals a narrow direct bandgap (2.024 eV) attributed to the slight bending of I−Pb-I edge and inorganic [Pb₂I₇]_n layer and a superior photoluminescence (PL) emission with super long lifetime of 0.1607 ms. It is believed that this work will pave an avenue to further design multifunctional semiconductors that combines energy storage and photoelectric materials.