硅胶修饰-表面分子印迹牛血红蛋白及其识别性能的研究

选用马来酸酐修饰的硅胶作为载体,丙烯酰胺为功能单体,N,N′-亚甲基双丙烯酰胺为交联剂,牛血红蛋白为模板分子,采用氧化还原悬浮聚合法,合成了具有选择性识别的牛血红蛋白分子印迹聚合物.并用红外光谱(IR)、扫描电子显微镜(SEM)和元素分析对聚合物进行了表征,结果表明载体表面成功地接枝了分子印迹聚合物薄层.同时选择性吸附实验表明分子印迹聚合物具有良好的识别性能,能实现水溶液中牛血红蛋白的富集.     

光接枝表面修饰法制备牛血红蛋白的分子印迹微球

聚苯乙烯球载体表面经引发转移终止剂修饰后, 采用光接枝表面印迹方法制备了以牛血红蛋白(BHb)为模板分子、丙烯酰胺为功能单体和N,N′-亚甲基双丙烯酰胺为交联剂的分子印迹聚合物微球(MIP). 进一步采用红外光谱(IR)、扫描电子显微镜(SEM)和元素分析对聚合物微球进行了表征, 证实了载体表面成功地接枝了分子印迹层, 并研究了其吸附性能和分子识别选择性能. 结果表明, 采用光接枝表面修饰法制备的分子印迹微球对模板分子有着很好的吸附容量和识别选择性.     

壳聚糖包裹硅胶载体印迹牛血红蛋白的研究

用壳聚糖包裹的硅胶为载体, 利用壳聚糖表面的氨基与戊二醛结合, 在硅胶表面引入醛基, 固定模板蛋白(牛血红蛋白). 用溶胶-凝胶过程再次包裹固定蛋白质的载体, 洗去模板蛋白后, 得到具有选择性识别的牛血红蛋白分子印迹聚合物. 用红外光谱(IR)、扫描电子显微镜(SEM)和元素分析对聚合物进行了表征, 结果表明, 载体表面成功地接枝了分子印迹聚合物. 选择性吸附实验结果表明, 分子印迹聚合物具有良好的识别性能, 能实现水溶液中牛血红蛋白的富集.     

制备牛血红蛋白印迹聚合物的初步研究

采用凝胶法,以丙烯酰胺为单体.N,N'-甲叉双丙烯酰胺为交联剂,制备了牛血红蛋白的分子印迹聚合物.通过考察不同单体用量对所制备的分子印迹聚合物的吸附性能的影响,得到优化制备条件.用吸附溶液的光吸收性质及电镜等对印迹聚合物的选择性吸附特性和形态特征进行表征.结果表明,制备的分子印迹聚合物对模板分子牛血红蛋白可以选择性吸附,具有很好的发展潜力.     

牛血红蛋白印迹聚合物的制备及其对牛血红蛋白的吸附特性

以牛血红蛋白为模板分子,丙烯酰胺为功能单体,N,N’-亚甲基双丙烯酰胺为交联剂,采用醛基硅胶表面修饰技术,合成了牛血红蛋白印迹聚合物（MIP）,并研究了该印迹聚合物对牛血红蛋白的吸附特性。结果表明:当洗脱时间为8 h、洗脱率为83.53%时,印迹聚合物对牛血红蛋白的吸附量为81.39 mg·g^-1。     

碳点基荧光印迹聚合物选择性检测牛血红蛋白

以荧光碳点为载体,3-氨丙基三乙氧基硅烷为功能单体,正硅酸乙酯为交联剂,牛血红蛋白为模板分子,采用溶胶-凝胶法制备出对牛血红蛋白具有高选择性识别性能的新型荧光印迹聚合复合材料(CDs@MIP)。采用红外光谱(IR)和扫描电子显微镜(SEM)对聚合物进行表征,结果表明,分子印迹聚合物包覆在荧光碳点表面,印迹因子为4.60。此CDs@MIP对牛血红蛋白具有高选择性,相对于卵清蛋白、牛血清蛋白、人血清蛋白的选择因子分别为4.38、4.73和3.66。在最佳条件下,此CDs@MIP对牛血红蛋白的响应线性范围为0.1～10.0μmol/L,检出限为23.0 nmol/L。将此CDs@MIP用于牛血液样品中牛血红蛋白的测定,回收率为99.0%～102.5%。     

牛血清白蛋白分子表面印迹材料的制备及其大分子识别特性研究

通过分子设计和过程策划,制备了高性能的牛血清白蛋白(BSA)分子表面印迹材料.首先以甲基丙烯酰氯为试剂,使交联聚乙烯醇(CPVA)微球表面的羟基发生酯化反应,将大量可聚合双键引入到CPVA微球表面.然后以含有可聚合双键的CPVA微球为载体,阳离子单体丙烯酰氧乙基三甲基氯化铵(DAC)为功能单体,N,N’-亚甲基双丙烯酰胺(MBA)为交联剂,牛血清白蛋白(BSA)为模板分子,在水溶液体系中,基于主-客体之间的强静电相互作用,采用接枝聚合与印迹过程同步进行的方式,制备了高性能BSA分子表面印迹微球MIP-PDAC/CPVA.采用红外光谱(IR)和扫描电子显微镜(SEM)对产物微球进行了表征.研究了印迹聚合物微球MIP-PDAC/CPVA对BSA的大分子识别特性.研究结果表明,微球MIP-PDAC/CPVA对BSA具有优良的结合亲和性和特异的识别选择性,结合容量高达108 mg/g,对牛血红蛋白(BHb)却基本不结合;相对于BHb,MIP-PDAC/CPVA对BSA的选择性系数高达60.2.     

1-乙烯基-3-甲基咪唑离子液体/分子印迹材料用于牛血红蛋白的识别

分子印迹聚合物是一类对目标分子具备特异性辨别能力的高分子吸附剂材料.运用本体聚合法,以牛血红蛋白(BHb)为模板分子,丙烯酰胺(AAM)和碘化1-乙烯基-3-甲基咪唑离子液体在交联剂、引发剂和加速剂的作用下进行聚合,制备的分子印迹材料对牛血红蛋白(BHb)具备特异性识别功能.同时,对识别条件进行了优化和讨论.     

在硅胶表面制备牛血红蛋白分子印迹聚合物

采用表面印迹法, 以乙烯基三甲氧基硅烷修饰的硅胶为载体, 丙烯酰胺为功能单体, N,N-亚甲基双丙烯酰胺为交联剂, 并将改性聚乙烯醇(PVA)作为辅助识别聚合物链(ARPCs)引入聚合体系中, 制备了牛血红蛋白分子印迹聚合物(MIP). 实验使用红外光谱分析了改性PVA的结构特征, 用扫描电镜(SEM)观察MIP的表面形貌, 考察了ARPCs的含量对MIP吸附性能的影响. 吸附动力学实验研究表明, 聚合体系中ARPCs的引入使MIP对模板牛血红蛋白(BHb)的吸附量明显提高|十二烷基磺酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)结果显示, MIP对BHb的特异性吸附能力明显提高.     

3-氨基苯硼酸为功能单体在壳聚糖上印迹牛血清白蛋白的研究

以壳聚糖为载体, 3-氨基苯硼酸为功能单体对牛血清白蛋白进行了分子印迹的研究, 并对吸附过程进行Langmuir等温吸附模型的数据处理. 结果表明, 印迹聚合物上形成了对于模板分子有较高的吸附容量和选择性的识别位点, Langmuir等温吸附平衡常数为49.5 mL/mg, 结合位点的最大表观结合量为16.3 mg/g, 证明了该印迹聚合物对于牛血红蛋白和溶菌酶这些非模板蛋白的吸附不具有选择性.     

Efficient synthesis of molecularly imprinted polymers with bio‐recognition sites for the selective separation of bovine hemoglobin

We developed a facile approach to the construction of bio‐recognition sites in silica nanoparticles for efficient separation of bovine hemoglobin based on amino‐functionalized silica nanoparticles grafting by 3‐aminopropyltriethoxylsilane providing hydrogen bonds with bovine hemoglobin through surface molecularly imprinting technology. The resulting amino‐functionalized silica surface molecularly imprinted polymers were characterized using scanning electron microscope, transmission electronic microscopy, Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and thermogravimetric analysis. Results showed that the as‐synthesized imprinted polymers exhibited spherical morphology and favorable thermal stability. The binding adsorption experiments showed that the imprinted polymers can reach equilibrium within 1 h. The Langmuir isotherm and pseudo‐second‐order kinetic model fitted the adsorption data well. Meanwhile, the imprinted polymers possessed a maximum binding capacity up to 90.3 mg/g and highly selectivity for the recognition of bovine hemoglobin. Moreover, such high binding capacity and selectivity retained after eight cycles, indicating the good stability and reusability of the imprinted polymers. Finally, successful application in the selective recognition of bovine hemoglobin from a real bovine blood sample indicated that the imprinted polymers displayed great potentials in efficient purification and separation of target proteins.     

复合分子印迹聚合物体系选择性富集蛋白质样品中的溶菌酶

考察了功能单体与模板蛋白的反应摩尔比、溶液pH值及离子强度对功能单体与模板蛋白之间相互作用的影响, 得出制备分子印迹聚合物的最佳条件. 在最佳条件下, 以溶菌酶(Lyz)为模板分子, 丙烯酰胺(AA)和N,N’-亚甲基双丙烯酰胺(BisAA)为聚合基质, 二氧化硅为固体制孔剂, 制备了复合分子印迹聚丙烯酰胺凝胶, 并用平衡吸附实验研究了其吸附性能和识别选择性. 研究结果表明, 该聚合物对模板蛋白有较高的亲和性、选择性和吸附容量,可以从蛋白质混合溶液中分离富集模板分子.     

Selective adsorption of protein by a high‐efficiency Cu2+‐cooperated magnetic imprinted nanomaterial

We report a core–shell magnetic molecularly imprinted polymer with high affinity through a facile sol–gel method for the selective adsorption of bovine hemoglobin from real bovine blood. Copper ions grafted on the surface of the matrix could immobilize template protein through chelation, which greatly enhances the orderliness of imprinted cavities and affinity of polymers. The obtained products exhibit a desired level of magnetic susceptibility, resulting in the highly efficient adsorption process. The results of adsorption experiments show that the saturation adsorption capacity of imprinted products could reach 116.3 mg/g within 30 min. Meanwhile, the specific binding experiment demonstrates the high selectivity of polymers for bovine hemoglobin. Furthermore, satisfactory reusability is demonstrated by ten adsorption–desorption cycles with no obvious deterioration in binding capacity. Electrophoretic analysis suggests the polymer could be used successfully in separation and enrichment of bovine hemoglobin from the bovine blood sample, which exhibits potential application in pretreatment of proteomics.     

Organic–inorganic hybrid silica as supporting matrices for selective recognition of bovine hemoglobin via covalent immobilization

The synthesis of poly‐aminophenylboronic acid (APBA) imprinted hybrid silica‐based polymers for selective recognition of bovine hemoglobin (BHb) was described, where the mesoporous hybrid silica supporting matrices were prepared by a mild sol–gel process with tetraethoxysilane and 3‐aminopropyltriethoxysilane as two precursors. Covalent immobilization of BHb was adopted in order to create homogeneous recognition sites. After removal of the template, the resulting imprinted polymers showed high binding affinity toward BHb and the imprinting factor (α) reached 2.12. The specificity of the BHb recognition was evaluated with competitive experiments, indicating the imprinted polymers have a higher selectivity for the template BHb. The easy preparation protocol and good protein recognition properties made the approach an attractive solution to depletion of high‐abundance protein from bovine blood.     

核壳结构Boc-氨基酸分子印迹分离介质的研究

将硅胶表面硅羟基与γ-（甲基丙烯酰氧）丙基三甲氧基硅烷反应合成具有CC端基的改性硅胶核,进一步以N-Boc-L-色氨酸为模板分子,采用分子印迹技术在改性后的硅胶表面包覆印迹聚合物,制备出核壳结构氨基酸分子印迹分离介质。这种印迹分离介质对模板N-Boc-L-色氨酸具有良好的吸附性,最大饱和吸附量可达到85.96 mg/...     

Sol–gel synthesis of mesoporous silicas containing albumin and guanidine polymers and its application to the bilirubin adsorption

The organic–inorganic composite materials based on mesoporous silica were synthesized using sol–gel method. The surface area of silicas was modified by bovine serum albumin (BSA) and guanidine polymers: polyacrylate guanidine (PAG) and polymethacrylate guanidine. The mesoporous silicas were characterized by nitrogen adsorption–desorption analysis, Fourier transform infrared spectroscopy, transmission electron microscopy. The obtained materials were used as adsorbents for selective bilirubin removal. It was shown that the structural properties and surface area of modified materials depend on the nature of polymers. Incorporation of polymers in silica gel matrix during sol–gel process leads to the formation of mesoporous structure with high pore diameter and a BET surface area equals to 346 m²/g for SiO₂/BSA and 160 m²/g for SiO₂/PAG. Analysis of adsorption isotherms showed that modification of silica by BSA and guanidine polymers increases its adsorption ability to bilirubin molecules. According to Langmuir model, the maximum bilirubin adsorption capacity was 1.18 mg/g.     

表面印迹法制备钴(Ⅱ)离子印迹硅胶及性能

采用表面印迹技术, 以Co(Ⅱ)离子作为印迹离子, 二乙烯三胺基丙基三甲氧基硅烷为功能分子, 硅胶为支撑物, 环氧氯丙烷为交联剂, 在硅胶表面制备Co(Ⅱ)离子印迹硅胶材料, 利用红外光谱仪、扫描电镜和热重分析仪等进行了表征, 采用平衡吸附法研究了印迹硅胶材料的吸附性能和选择识别能力. 结果表明, 印迹硅胶材料和非印迹硅胶材料的最大吸附量分别为35.2和6.5 mg/g; 印迹硅胶材料对Co(Ⅱ)离子的吸附行为符合Langmuir模型; 20 min即可达到吸附平衡; 当pH=3.9~7.8时, 印迹硅胶材料保持了较好的吸附容量; 印迹硅胶材料对Co(Ⅱ)离子具有较强的选择性识别能力; 重复使用时性能稳定.     

Synthesis of magnetic dual‐template molecularly imprinted nanoparticles for the specific removal of two high‐abundance proteins simultaneously in blood plasma

Novel core–shell dual‐template molecularly imprinted superparamagnetic nanoparticles were synthesized using bovine hemoglobin and bovine serum albumin as the templates for the efficient depletion of these two high‐abundance proteins from blood plasma for the first time. The preparation process combined surface imprinting technique and a two‐step immobilized template strategy. The obtained polymers were fully characterized by transmission electron microscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, and vibrating sample magnetometry. The results showed that the as‐synthesized nanomaterials possessed homogeneous and thin imprinted shells with a thickness of about 5 nm, stable crystalline phase, and superparamagnetism. The binding performance of the imprinted polymers was investigated through a series of adsorption experiments, which indicated that the products had satisfactory recognition ability for bovine hemoglobin and bovine serum albumin. The resultant nanoparticles were also successfully applied to simultaneously selective removal of two proteins from a real bovine blood sample.