Preorganized, cone-conformational calix[4]arene possessing four propylenephosphonic acids with high extraction ability and separation efficiency for trivalent rare earth elements

p-t-Octylcalix[4]arene with tetraphosphonic acid at lower rim in cone conformation has been designed and synthesized as a new extraction reagent to investigate the extraction behavior of the nine trivalent rare earth elements: La, Pr, Nd, Sm, Eu, Gd, Ho, Y, and Er. The extraction of rare earth metals with the present extractant occurs by a simple ion-exchange mechanism. The stoichiometry of the extractant to rare earth metal ion was determined to be 2:1 based on the extraction equation, half pH values, pH_1/2, and the difference in the values of the extraction equilibrium constants of nine trivalent rare earth elements and separation factors between adjacent rare earth elements. This allowed for comparison of the estimated extraction efficiency and selectivity. The present extractant exhibited extremely high extractability and sufficiently high separation efficiency of rare earth metals, compared with calix[4]arene tetraphosphonic acid at upper rim, calix[4]arene tetraacetic acid at lower rim as previously reported and the commercial extraction reagent. This results was attributed to size and multidentate effects based on the preorganized cyclic structure of calix[4]arene and to the original selectivity of functional group for heavier rare earth elements.     

The Preorganization Effect of the Calix[4]arene Platform on the Extraction Properties of Acetylhydrazide Groups with Transition Metal Ions

The binding properties of the cone conformer of O,O,O,O-tetrakis[hydrazinocarbonylmethyl]-4-tert-butylcalix[4]arene, the cone and the 1,3-alternate conformers of the corresponding thia analogue have been evaluated by means of liquid–liquid extraction for a large variety of metal ions. The extraction constants and the stoichiometries of the complexes formed have been determined. Comparison of the extraction properties of calix[4]arenes with their acyclic monomeric analogue clearly demonstrated, that the preorganization of acetylhydrazide groups on the calix[4]arene platform is the cause for a significant improvement of its binding properties. The presence of additional “soft” nitrogen binding sites in acetylhydrazide derivatives of calix[4]arenes compared to their amide derivatives leads to a shift from their classical selectivity for alkali and alkaline earth cations to transition metals. The cone conformer of tetrathiacalix[4]arene shows higher selectivity in a series of d-metal ions compared with its “classical” analogue. The 1,3-alternate conformer exhibits an excellent extraction selectivity for Cu²⁺ and Hg²⁺.     

Stable azomethine imines derived from pyrazolidin-3-one and their cycloaddition to <Emphasis Type="Italic">N</Emphasis>-arylmaleimides

Reactions of (Z)-1-arylmethylidene-3-oxopyrazolidin-1-ium-2-ides (stable analogs of azomethine imines generated by thermal opening of the diaziridine fragment in 6-aryl-1,5-diazabicyclo[3.1.0]hexanes) with N-arylmaleimides having no ortho substituents in the aryl group are stereoselective: the products are mixtures of the corresponding cis and trans adducts, the latter prevailing (∼1.4–2.6: 1). trans Adducts are formed as the only products in the reactions with di-ortho-substituted N-arylmaleimides. (Z)-1-[(2,6-Dichlorophenyl) methylidene]-3-oxopyrazolidin-1-ium-2-ide reacts with both para- and ortho-substituted N-arylmaleimides to give exclusively trans adducts. Labile azomethine imines generated by thermolysis of 6-aryl-1,5-diazabicyclo[3.1.0]hexanes are likely to have Z configuration as well.     

Lower-rim versus upper-rim functionalization in di-ionizable calix[4]arene-crown-5 isomers. Synthesis and divalent metal ion extraction

Two series of di-ionizable calix[4]arene-crown-5 isomers in the cone conformation are synthesized to probe the effect of the pendant acidic group location on their metal ion extraction properties. In one series, the ionizable groups are attached to the lower rim of the calix[4]arene scaffold, which orients them near the crown ether cavity. In the second series, the ionizable groups are connected to the upper rim positioning them away from the crown ether ring, but close to the hydrophobic pocket of the calix[4]arene unit. The metal ion extraction behaviors of the two series of ligands are compared in extractions of alkaline earth metal cations, Hg²⁺, and Pb²⁺.     

An Absence of Non-specific Immune Response towards para-Sulphonato-calix[n]arenes

The effects of para-Sulphonato-calix[4]arene, para-Sulphonato-calix[6]arene and para-Sulphonato-calix[8]arene on the activation of NADPH oxidase in neutrophils has been studied. All three molecules do not induce NADPH oxidase activation, and hence do not stimulate neutrophils. Measurement of cell viability demonstrates that these three water-soluble calix[n]arene derivatives are not cytotoxic.     

The design of cone-fixed calix[4]arene analogs by takingsyn-[2.n]metacyclophanes as a building block

Rigidified calix[4]arene analogs were synthesized fromsyn-[2.n]metacyclophanes as a building block. Their structure was firmly locked in the cone conformation. An enlarged calix[4]arene analog was obtained after the cyclobutane ring cleavage of the parent analog by Birch reduction. Several ionophores have been derived from the analogs and been found to select the larger ions during the extraction of alkali metals, transition metals, and lanthanoids. The ionophore having oligoethylene glycol units showed an effective catalytic activity for S_N2 reactions such as ester synthesis, Williamson ether synthesis, and Finkelstein reaction in several media.This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.     

Competitive Self and Induced Aggregation of Calix[4]arene Ethers and Their Interaction with Pinacyanol Chloride and Methylene Blue in Nonaqueous Media

Long chain calix[4]arene ethers have been examined for aggregation in nonaqueous solvents by using UV-vis molecular absorbance spectroscopy. It has been observed that tetraalkylated (alkyl = hexadecyl and octadecyl, respectively) calix[4]arene ethers tend to aggregate in chloroform and tetrahydrofuran, possibly via π–π stacking interactions of the phenyl moieties, and the aggregation process appears to be facilitated by the alkyl chains. The analogous dialkylated compounds do not show any self-aggregation, plausibly due to strong hydrogen bonding between the –OH and the –O– of calix aryl ether which seems to disrupt the aggregation process. Addition of the anionic surfactant sodium dodecylsulfate (SDS) appears to hinder the aggregation process in nonpolar chloroform but the same surfactant facilitates aggregation in the polar tetrahydrofuran. The cationic surfactant (cetyltrimethyl ammonium bromide) and the nonionic surfactant (Brij-35) have no effect on this aggregation process. Unexpectedly, SDS induces aggregation of dialkylated calix[4]arene ethers in chloroform. It has been observed that the aggregated form of the tetraalkylated calix[4]arene ethers tend to increase the dimerization efficiency of cationic dyes (pinacyanol chloride and methylene blue) in chloroform.     

Nano‐baskets in Emulsion Liquid Membranes for Selective Extraction of Alkali Metals

Nano‐assisted inclusion separation of alkali metals from basic solutions was reported by inclusion‐facilitated emulsion liquid membrane process. The novelty of this study is application of nano‐baskets of calixarene in the selective and efficient separation of alkali metals as both the carrier and the surfactant. For this aim, four derivatives of p‐tert‐calix[4]arene bearing different sulfonamide moieties were synthesized and their inclusion‐extraction parameters were optimized. The selectivity of membrane over more than ten interfering cations was examined and the results reveled that under the optimized operating condition, the degree of inclusion‐extraction of alkali metals was as high as 98‐99%.     

X-ray guided H NMR analysis of pinched cone calix[4]arenes

The analysis of structural parameters of azobenzene- and stilbene-bridged calix[4]arene obtained from AM1 calculation are in good agreement with those obtained from X-ray crystallography. The bridge longer than 9.0 Å such as p,p-trans-azobenzene and p,p-trans-stilbene cannot be constructed over the narrow rim of calix[4]arene through two ethylene oxide linkers. The m,m-stilbene bridge is the most promising photo switch because its shorter cis stereoisomer (5.85 Å) allows calix[4]arene to assume the perfect cone conformation, whilst its longer trans stereoisomer (8.00 Å) forces calix[4]arene to adapt a pinched cone conformation. The pinched cone conformation has longer distances between the neighbouring phenoxyl groups causing the weaker intramolecular hydrogen bonding and the upfield shifts of the phenolic proton signals to below 7.00 ppm. This upfield shift is useful for quick identification of pinched cone conformation of new calix[4]arene compounds.     

Synthesis and characterization of new polyimides containing calix[4]arenes in the polymer backbone

Two diaminocalix[4]arene monomers were synthesized from p-tert-butylcalix[4]arene through a 4-step reaction sequence. New copoly(amic acid)s containing calix[4]arene moieties on the polymer backbone were successfully synthesized in N-methyl-2-pyrrolidone by polycondensations of 4,4′-oxydiphthalic anhydride (ODPA) with the diaminocalix[4]arene monomers using 4,4′-oxydiphenylene diamine (ODA) as a comonomer. These copoly(amic acid)s were soluble in aprotic polar solvents, so that they can be processed in various ways. The copoly(amic acid) precursors were thermally converted to the corresponding copolyimides in films. The copolyimide films are amorphous, but insoluble in common solvents. They are thermally stable up to 366°C. The copolyimides exhibit relatively high TEC's, low T_g's, low refractive index, low dielectric constant, low optical anisotropy, low dielectric anisotropy, and low water uptake, compared to those of conventional ODPA-ODA polyimide. These property characteristics were interpreted in regard to bulky, cone-like calix[4]arene moieties and their effects on the chain conformation and morphological structure. The processability and property characteristics support that both of the copolyimides containing calix[4]arene moieties are potential candidate materials suitable for membranes, antioxidant additives, chemical sensor devices, and microelectronic devices. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2013–2026, 1999     

Synthesis and application of an efficient calix[4]arene-based anion receptor bearing imidazole groups for Cr(VI) anionic species

We synthesized the new calix[4]arene amines bearing two and four imidazole or tert-butylamine moieties (9a,b/10a,b) by the reaction of di- or tetra-tosylated calix[4]arene derivatives (7 and 8, respectively) with 1-(3-aminopropyl)imidazole and/or tert-butylamine, respectively. After the characterization of 9a,b/10a,b their extraction abilities toward Cr(VI) anionic species (CAS) was evaluated and compared by the liquid–liquid extraction method. The extraction results revealed that calix[4]arene amine having four imidazole groups (10a) was an efficient anion receptor for CAS. Moreover, the extraction of CAS by 10a in the presence of other anions such as Cl^?, NO₃^?, and PO₄^3? showed that 10a could be a selective anion receptor for CAS in the presence of those anions.     

(1+1) or (2+2) Coupling for bis(tosyloxyethoxy)benzenes with calix[4]arene and thiacalix[4]arene

As bifunctional reagents, bis(tosyloxyethoxy)benzenes can react with p-tert-butylcalix[4]arene or p-tert-butylthiacalix[4]arene to afford intramolecularly bridged (1+1) or intermolecularly bridged (2+2) products. It was found that the bridging pattern strongly depended on the structure of bis(tosyloxyethoxy)benzene and the kind of calixarene. For the ortho-isomer of bis(tosyloxyethoxy)benzene, intramolecularly bridged calix[4]arene and thiacalix[4]arene were the main products. For the para-isomer, the bridging reaction was in a (2+2) fashion. As for the meta-isomer, double thiacalix[4]arene and intramolecularly bridged calix[4]crown were synthesized.     

Mercury(II) and silver(I) receptors based on tetrathiacalix[4]arene hydrazones

The extraction ability of phenyl hydrazone derivatives of cone- and 1,3-alternate tetrathiacalix[4]arenes towards to some alkali, alkaline earth, transition and heavy metal ions has been investigated by picrate extraction method. The synthesized cone-tetrathiacalix[4]arene hydrazones show a high efficiency coupled with an excellent selectivity towards for Ag⁺ and Hg²⁺ ions. The stoichiometry of complexes and the extraction constants have been determined. The influence of calix[4]arene platform’s structure and the electron donor substituents in phenyl fragments on the extraction efficiency has been discussed.     

Improvement of selective d-cation binding by tetrathiacalix[4]arene hydrazides: synthesis and extraction properties

New de-tert-butyltetrathiacalix[4]arenes with acetylhydrazide substituents in cone and 1,3-alternate conformations have been synthesised with good yield by the hydrazinolysis of calix[4]arene ester derivatives. The recognition ability of synthesised macrocycles towards transition and alkali metals has been investigated by the picrate extraction method. The stoichiometry of complexes and the extraction constants have been determined. It has been found that tetrahydrazides do not extract alkali metal ions, but show an excellent affinity towards transition and heavy metal cations. The 1,3-alternate conformer of de-tert-butyltetrathiacalix[4]arene has revealed a remarkable selectivity for Ni²⁺ and Ag⁺ in the row of d-elements and for Cd²⁺ ion among the toxic heavy metals. The experimental data show that the removal of tert-butyl groups from tetrathiacalix[4]arene framework leads to the drastic improvement of extraction efficiency and selectivity of new tetrahydrazides.     

Synthesis of novel chiral Schiff base and amino alcohol derivatives of calix[4]arene and chiral recognition properties

In the present study, the synthesis and liquid phase extraction properties towards some amino acid methylesters and amino alcohols of Schiff base and amino alcohol substituted calix[4]arene are reported. The Schiff base substituted calix[4]arene 5 has been synthesized via condensation reaction involving 5,17-diformyl-11,23-di-tert-butyl-25,27-di[3-(4-formylphenoxy)propoxy]-26,28 dihydroxycalix[4]arene 4 and (R)-(?)-2-phenylglycine methyl ester in CHCl₃:MeOH. To give the amino alcohol substituted calix[4]arene 6, the synthesized chiral compound 5 was reduced by LiAlH₄. The new chiral Schiff base and amino alcohol derivatives of calix[4]arene have been characterized by a combination of FT-IR, ¹H NMR, ¹³C NMR, FAB-MS and elemental analysis. Also, the extraction behaviors of 5 and 6 towards some selected amino acid methylesters and amino alcohols have been studied by liquid–liquid extraction.     

Fluorescence Spectral Studies on the Coordination of Calix[4]‐arenes Bearing Boronic Acid Moieties with Monosaccharides

Coordination of ten calix[4]arenes bearing boronic acid moieties with five monosaccharides was studied by fluorescence spectrometry. The stability constants (K₂) of the complexes and Gibbs free energy change ( ‐ ΔG⁰) of the coordination reactions were calculated according to the modified Hilderbrand‐Benesi equation. The results obtained indicated that the coordination ability of D‐( ‐ )‐fructose with calix[4] arenes bearing boronic acid moieties was stronger than that of the other monosaccharides. And these calix[4]arene derivatives might be used for identification of L‐( ‐ )‐sorbose.     

Information transfer in calix[4]arenes: influence of upper rim substitution on alkaline metal complexation at the lower rim

Novel calix[4]arene amides have been synthesized and their interaction with alkaline cations has been evaluated through extracting aqueous solutions of Li-, Na- and K-picrates with solutions of calix[4]arene amides in CH₂Cl₂. Electron-withdrawing groups on the upper rim of the calix[4]arene scaffold were found to have a negative effect on the absolute amount of metal ions extracted. The decreased extraction ability is accompanied by a higher selectivity towards sodium cations.     

Arene C−H Activation at Aluminium(I): meta Selectivity Driven by the Electronics of SNAr Chemistry

The reactivity of the electron-rich anionic Al^I aluminyl compound K₂[(NON)Al]₂ (NON=4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethylxanthene) towards mono- and disubstituted arenes is reported. C−H activation chemistry with n-butylbenzene gives exclusively the product of activation at the arene meta position. Mechanistically, this transformation proceeds in a single step via a concerted Meisenheimer-type transition state. Selectivity is therefore based on similar electronic factors to classical S_NAr chemistry, which implies the destabilisation of transition states featuring electron-donating groups in either ortho or para positions. In the cases of toluene and the three isomers of xylene, benzylic C−H activation is also possible, with the product(s) formed reflecting the feasibility (or otherwise) of competing arene C−H activation at a site which is neither ortho nor para to a methyl substituent.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Conformationally Selective Synthesis of Mononitrocalix[4]arene in Cone or Partial Cone

Nitro‐substituted calixarenes in a cone and a partial cone conformation were prepared selectively using distinct synthetic routes. The selective nitration of tris‐ or penta‐substituted phenols of calix[4]arene or calix[6]arene provided mononitrocalix[n ]arenes (n  =  4, 6). Subsequent addition of ethylene glycol (EG) moieties to mononitrocalix[4]arene provided tetraEGylcalix[4]arene in locked partial cone conformation. By an alternative route – initial addition of EG moieties to the non‐derivatized calix[4]arene followed by the uncontrolled nitration – provided mononitro‐ and dinitro‐tetraEGylcalix[4]arenes locked in the cone conformation. These nitrocalix[4]arenes with locked cone or partial cone conformation are useful building blocks for further assembly of supramolecular systems, especially in the area of material sciences.