宝日希勒褐煤在合成气与复合溶剂系统下的液化性能研究

在合成气（CO+H₂）与复合溶剂（水+有机溶剂）液化系统下研究了气氛、温度、催化剂类型对宝日希勒褐煤转化率、油气水产率和CO转化率等液化特征的影响,从而探讨其液化性能。结果表明,在高含水复合溶剂系统中,合成气气氛、反应温度430-450℃适宜宝日希勒褐煤液化转化,转化率可达到81.15%,油气水产率达到71.53%。该液化系统下,含铁、碱和硫复合型催化剂能有效地提高液化转化率和油气水产率,在430℃催化液化下褐煤转化率达92.27%,油气水产率达79.39%。该催化剂有效促进了煤中大分子的裂解和系统中水煤气变换反应进程,沥青质减少,油含量增多。液化油中多环芳烃衍生物在催化液化过程中向单环芳烃衍生物和烷烯烃转化,分子量降低,提高了油品质量。     

石墨烯纤维：制备、性能与应用

石墨烯纤维是一种由石墨烯片层紧密有序排列而成的一维宏观组装材料。通过合理的结构设计和可控制备,石墨烯纤维能够将石墨烯在微观尺度的优异性能有效传递至宏观尺度,展现出优异的力学、电学、热学等性能,从而应用于功能织物、传感、能源等领域。目前,石墨烯纤维主要通过湿法纺丝、限域水热组装等方法制备得到,其性能可以通过对材料体系和制备工艺的优化而进一步提升。本文首先介绍了石墨烯纤维的制备方法,然后详细阐述了石墨烯纤维的性能,讨论了其性能提升策略,并总结了石墨烯纤维的应用,最后对石墨烯纤维的未来发展、挑战和前景进行了展望。     

冰片及其酯/酰胺类衍生物的合成和活性研究进展

冰片是重要的芳香开窍类中药,具有开窍醒神,清热止痛等功效,常被作为佐药与其他中药配伍使用。目前,冰片及其衍生物广泛用于医药、农药、化工及香料领域,市场前景好,研究和开发价值高。本文对天然冰片、合成冰片及其酯/酰胺类衍生物的主要合成方法和生物活性方面进行了系统总结,并对冰片酯类衍生物未来的研究方向进行了展望,以期为冰片及其酯/酰胺类衍生物的进一步的研究提供有益参考。     

Monitoring of pesticide residues in Riyadh dates by SFE,MSE, SFC,and GC techniques

In the present work, simple and rapid extraction and analysis techniques of insecticide (OCPs, OPPs, pyrethroids), fungicide, acaricide, and herbicide residues in three cultivars’ of date fruits viz., Khalas, Sukkari, Nabout Seif and their seeds have been applied. The date cultivars were collected from eight local markets of Riyadh, KSA. The extraction of pesticide residues from the three varieties of date samples was conducted by rapid and new extraction techniques, Supercritical Fluid Extraction (SFE) and Microwave Solvent Extraction (MSE). The analysis was performed, without clean-up, by Supercritical Fluid Chromatography (SFC) and Gas Chromatography (GC) using different detectors. The results showed that the SFE, MSE, SFC and GC techniques are clearly faster, more sensitive and more cost effective than conventional methods. The recovery efficiency of SFE and MSE was 99% and 97%, respectively. The recoveries, MDL (Minimum Detection Limit) and repeatability achieved in this study meet the standards set for tolerance level monitoring of these pesticides. The mean levels of some tested residues of pyrethroids, herbicides, and fungicides in dates and their seeds are below the MRL (Maximum Residue Level). However, lindane (BHC gamma isomer), dieldrin, dimethoate, chlorpyrifos and all tested acaricide residues in date fruit samples exceeded the MRLs indicating a hazardous trend in the date palm cultivation. The data also showed a higher concentration of OP dimethoate in the date seeds, which is sometimes, used as animal feed. The present results provide important information on the current contamination status of the date fruits in Riyadh markets and point to the action needed for controlling the excessive application of pesticides. This study is the first monitoring and screening of pesticide residues of 6 groups in Saudi Arabian dates.     

三唑类药物研究新进展

三唑类化合物作为药物广泛应用于临床,是目前药物研究开发的重点领域之一．越来越多的高活性、低毒性、不良反应少、多药耐药性小、生物利用率高、药代动力学性质好、药物靶向性强、给药方式多样化、广谱、高疗效的三唑类化合物作为候选药物或药物用于临床医治多种疾病,显示出了三唑类化合物在医药领域的巨大开发价值和潜在的宽广应用．本文结合自己的工作,参考国内外近五年文献系统地综述了三唑类化合物作为药物在整个医药领域的研究与开发近况,包括抗真菌、抗细菌、抗结核、抗癌、抗病毒、抗炎镇痛、抗惊厥等,并展望其发展趋势与前景．希望该评论有助于为高活性低毒性三唑类医药合理设计提供新思路．     

Tautomeric and conformational isomerism of natural hydroxyanthraquinones

Natural 1,5-di-, 1,4,5-tri-, and 1,4,5,8-tetrahydroxyanthraquinones and their anions and metal complexes were shown to be equilibrium mixtures of tautomers and conformers using quantum-chemical and correlation analysis of elecronic absorption spectra. Solvent effects, ionization, complexation, and the introduction and substitution of substituents were accompanied by shifts of tautomeric and conformational equilibria that determine the color of the compounds. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 224–229, May–June, 2006.     

Contributions to the Chemistry of the Binary Compounds of the Transition Elements

Phase and structural relationships of the sulfur, selenium, and tellurium compounds of the 4d and 5d transition elements of groups IV to VII of the periodic system are discussed. Homologous elements behave very similarly with respect to the chalcogens, and this is particularly the case for niobium and tantalum, and for molybdenum and tungsten. However, zirconium, niobium, and molybdenum have a greater tendency towards formation of chalcogen-poor phases than their homologues hafnium, tantalum, and tungsten. Subchalcogenides are known only for zirconium and niobium. The number of phases and the tendency towards formation of solid solutions are considerably smaller among the tellurides than among the sulfides and selenides. The crystal structures of the telluride phases also differ from those of the sulfide and selenide phases of analogous composition. In addition, a review of the phase and structural relationships of the arsenic and antimony compounds of the 4d and 5d transition elements of groups V to VII is given.     

Rhodium-Based Nanozymes: Recent Advances and Challenges

Rhodium (Rh) is a non-toxic transition metal used as various nanomaterials with unique structures and properties. Rh-based nanozymes can mimic the activities of natural enzymes, overcome the limitation of the application scope of natural enzymes, and interact with various biological microenvironments to play a variety of functions. Rh-based nanozymes can be synthesized in various ways, and different modification and regulation methods can also enable users to control catalytic performance by adjusting enzyme active sites. The construction of Rh-based nanozymes has attracted great interest in the biomedical field and impacted the industry and other areas. This paper reviews the typical synthesis and modification strategies, unique properties, applications, challenges, and prospects of Rh-based nanozymes. Next, the unique features of Rh-based nanozymes are emphasized, including adjustable enzyme-like activity, stability, and biocompatibility. In addition, we discuss Rh-based nanozymes biosensors and detection, biomedical therapy, and industrial and other applications. Finally, the future challenges and prospects of Rh-based nanozymes are proposed.     

液体弹珠：制备策略、物理性质及应用探索

Liquid marbles (LMs) are liquid droplets coated with a layer of lyophobic particles at the air-liquid interface. Since the pioneering work by Aussillous et al. in 2001, LMs have attracted significant attention owing to their facile fabrication, flexibility in the choice of the constituent particles and liquids, intriguing properties such as non-wetting and non-adhesive nature, satisfactory elasticity and stability, as well as promising applications in microfluidics, sensors, controlled release, and microreactors. The classical strategy for the preparation of LMs involves rolling a small volume of a droplet on a lyophobic powder bed for complete encapsulation of the liquid by the particles. In addition, various innovative methods, including electrostatic and coalescent approaches, have been developed for preparing special LMs with a complicated structure or morphology. Diverse materials such as water, surfactant solutions, liquid metals, reagents, blood, and even viscous adhesives have been employed as the internal liquid for the fabrication of LMs. Theoretically, any particulates such as lycopodium, polytetrafluoroethylene, Fe₃O₄, SiO₂, and graphite grains can be employed as the outer coating, but they are usually required to be lyophobic with sizes of less than hundreds of microns. The unique structure of the particle-covered droplet and the dual solid-liquid characteristics endow LMs with some unique and interesting properties, especially the non-wetting and non-adhesive nature. As the lyophobic coating particles restrain the internal liquid from contacting the substrate, LMs can move easily across either solid or liquid surfaces, neither wetting the substrate nor contaminating the internal liquid. An equally fascinating property of LMs is their satisfactory stability, which is necessary for most of their applications. The high stability of LMs stems from the protection of the coating powders and is embodied in both good mechanical stability (remaining intact after being released from a certain height or under a certain compression) and long lifetime (greatly suppressing the evaporation of the internal liquid). These extraordinary properties make LMs promising candidates for use in multitudinous fields, especially droplet microfluidics and microreactors. The potential application of LMs in microfluidics is ascribed to their non-wetting, non-adhesive nature and other features such as an ability to float on a liquid surface, coalescence, split, a small force of rolling friction, and response to external forces. Notably, LMs hold great promise for applications in microreactions, because they can create a confined reaction microenvironment, minimize reagent usage, facilitate unhindered gas exchange between the internal liquid medium and the surrounding environment, and allow the entry/exit of the reactants/products. We herein review the recent advances in LMs, such as manufacturing techniques, formation mechanisms, physical properties, and emerging applications. In particular, much attention is paid to the factors affecting the stability of LMs and the potential strategies to increase their stability. Moreover, this review discusses the challenges in the future development of LMs, suggests several possible ways of addressing these challenges, and forecasts the future development directions. We believe that this review can help researchers gain a better understanding of LMs and promote their further advances.     

Synthesis,structure, and function of internally functionalized dendrimers

The past three decades have witnessed an exponential increase in the structural diversity and applications of dendrimers, spanning across drug delivery and diagnostics, protein, and enzyme mimicry, solubility enhancement, coatings, light harvesting, and catalysis. The dendrimer community has recently focused on internally functionalized dendrimers (IFDs) owing to their advanced design and functionality. The synthesis of IFDs relies on advanced orthogonal chemistries and/or (de)protection schemes, as well as careful purification to minimize polydispersity of composition and molecular weight. The studies published on IFDs, however, lay scattered across the chemical literature, and a comprehensive presentation of structural rationale, synthetic procedures, and technologically relevant applications is missing. To address this need, this review presents a comprehensive collection and discussion of all available studies on IFDs, detailing their methods of synthesis and their structure–function correlations. The wide variety of internal functionalities, including hydroxyl, amine, carboxylic acid, allyl, alkyne, and imidazole groups, enables myriad applications in biochemistry, chemical and biomedical engineering, and material science. Particular focus is given to IFDs that are amenable to modular synthetic strategies, which promote higher synthetic yield and scalability, and therefore possess stronger translational and commercial potential. As such, this review guides research groups pursuing the difficult task of IFD rational design and synthesis providing them a concise roadmap to their mission.     

木犀草素衍生物研究进展

木犀草素属于黄酮类化合物,主要以糖苷的形式存在于蔬菜、水果和中草药中。木犀草素属于天然抗氧化剂,具有丰富的生物活性,可调节众多与疾病进展有关的细胞内和细胞外信号通路,具有抗氧化、抗炎、抗糖尿病、抗癌等作用。越来越多的证据表明,摄入木犀草素可能有益于影响糖脂代谢紊乱,特别是胰岛素抵抗、糖尿病和肥胖。木犀草素低溶解度和较低的生物利用度限制了在临床上的应用。然而,木犀草素的低分子质量和易修饰的化学基团,使其具有药物开发的吸引力。因此,研究人员通过各种方法设计合成了木犀草素衍生物,以改善其不利因素,进而发挥预防和治疗疾病的作用。木犀草素衍生物溶解性能好、生物利用度高、活性明显改善、抗癌活性增强,本文综述了木犀草素衍生物的研究进展,为天然产物的研究、开发及利用提供参考。     

Recent progress in MXene and graphene based nanocomposites for microwave absorption and electromagnetic interference shielding

There is widespread use of telecommunication and microwave technology in modern society, and raised the electromagnetic interference (EMI) issue to alarming situation due to apprehensive demand and growth of 5G technology undesirably disturbing the human health. The two dimensional (2D) materials including graphene and MXenes are already been used for variety of electronic devices due to their exceptional electrical, mechanical, optical, chemical, and thermal properties. MXene is composed of metal carbides, in which mainly metals are the building blocks for dielectrics, semiconductors, or semimetals. However, the strong interfaces with electromagnetic waves (EM) are variable from terahertz (THz) to gigahertz (GHz) frequency levels and are widely used in EMI and Microwave absorption (MA) for mobile networks and communication technologies. The use of different organic materials with metal, organic, inorganic fillers, polymers nanocomposite and MXene as a novel material has been studied to address the recent advancement and challenges in the microwave absorption mechanism of 2D materials and their nanocomposites. In this concern, various techniques and materials has been reported for the improvement of shielding effectiveness (SE), and theoretical aspects of EMI shielding performance, as well stability of 2D materials particularly MXene, graphene and its nanocomposites. Consequently, various materials including polymers, conducting polymers, and metal–organic frameworks (MOF) have also been discussed by introducing various strategies for improved MA and control of EMI shieling. Here in this comprehensive review, we summarized the recent developments on material synthesis and fabrication of MXene based nanocomposites for EMI shielding and MA. This research work is a comprehensive review majorly focuses on the fundamentals of EMI/MA.  The recent developments and challenges of the MXene and graphene based various structures with different polymeric composites are described in a broader perspective.     

Enzyme Mimics: Advances and Applications

Enzyme mimics or artificial enzymes are a class of catalysts that have been actively pursued for decades and have heralded much interest as potentially viable alternatives to natural enzymes. Aside from having catalytic activities similar to their natural counterparts, enzyme mimics have the desired advantages of tunable structures and catalytic efficiencies, excellent tolerance to experimental conditions, lower cost, and purely synthetic routes to their preparation. Although still in the midst of development, impressive advances have already been made. Enzyme mimics have shown immense potential in the catalysis of a wide range of chemical and biological reactions, the development of chemical and biological sensing and anti‐biofouling systems, and the production of pharmaceuticals and clean fuels. This Review concerns the development of various types of enzyme mimics, namely polymeric and dendrimeric, supramolecular, nanoparticulate and proteinic enzyme mimics, with an emphasis on their synthesis, catalytic properties and technical applications. It provides an introduction to enzyme mimics and a comprehensive summary of the advances and current standings of their applications, and seeks to inspire researchers to perfect the design and synthesis of enzyme mimics and to tailor their functionality for a much wider range of applications.     

Intellectual property—The Foundation of Innovation: A scientist's guide to intellectual property

Increasingly, the activities of the practicing scientist inextricably intersect with the business world. Science is central to the development and delivery of many goods or services, and scientific discovery can directly, or indirectly, lead to substantial revenue generation. Scientists, however, have little training in the complex issues of intellectual property (IP), and often little understanding of their rights and obligations. Here, we define IP and disuss what it means to be an inventor or creator of IP. We define and differentiate between the primary forms of IP—trade secrets, copyright, trademarks, and patents—and discuss their implementation and implications for the practicing scientist.     

A review on multi-component green synthesis of N-containing heterocycles using mixed oxides as heterogeneous catalysts

The use of mixed oxides is a well-appreciated approach in the fields of material science and synthesis, due to remarkable tunable surface properties such as acidic and basic characteristics, oxidation/reduction capabilities, and high agility of lattice oxygen, which makes them ideal choices as heterogeneous catalysts. The activity of the mixed oxides broadly relies on the nature of support and active material used and on the preparation method, calcination temperatures. Wide range of techniques for preparation of mixed oxide materials are adoptable, viz. sol-gel, co-precipitation, wet impregnation, microwave irradiation and hydrothermal methods. Use of mixed oxides as solid catalysts have gained popularity in many valued organic transformations, via alkylation, oxidation, condensation, dehydration, dehydrogenation, cycloaddition and isomerization. Application of mixed oxides in the area of green organic synthesis is a valuable strategy, which contributed significantly to the design of many novel heterocyclic scaffolds. The chemistry of N-heterocycle scaffolds, which generally possess five and six membered rings, is an interesting area for both synthetic and medicinal chemistry research constituting over 60% organics used in various arenas. The position and number of nitrogen atoms in the rings, distinguish them as pyrroles, pyrazoles, imidazoles, triazoles, pyridines and pyramidines classes. In this review, we focus on the scope, importance and versatile applications of mixed metal oxides and their synergetic effects as heterogeneous catalysts in the synthesis of variety of N-heterocyclic derivatives. The scientific aspects of the mixed oxides as catalytic active materials to design efficient synthetic protocols for the organic transformations is also discussed.     

半导体光催化研究进展与展望

评述了目前半导体光催化在国内外的研究概况,并对存在的问题和未来的发展动向进行简要分析.列举了近30年来关于光催化研究的部分成果,内容涉及光催化剂的制备(包括新催化剂的开发, TiO2、 ZnO、 CdS等光催化剂的各种改性或修饰)、光催化作用机理研究、光催化技术的工程化、光催化技术的各种应用研究和产品开发等等从基础到应用研究的各个方面.总体上来看,半导体光催化基本上是一个没有选择性的化学过程,所以再进行大量的不同反应物的光催化活性的评价研究意义已不是很显著,认为未来的半导体光催化研究应该集中在机理的深刻认识、光响应范围宽和量子效率高的催化剂制备、半导体光催化技术工程化及新型光催化产品开发方面.     

天然化合物芦丁的治疗潜力

芦丁属于类黄酮化合物,广泛存在于人们日常食用的各种蔬菜、水果和中草药中。 芦丁是天然的抗氧化剂,有清除自由基的特性,可调节众多疾病有关的细胞内和细胞外信号通路,影响细胞的生长,分化及其功能,对人们的健康,防病治病起着重要作用。芦丁具有广泛的药理活性,抗氧化、抗炎、抗病毒、抗癌、预防和治疗心脑血管疾病。以芦丁为原料的药品有多种,使用芦丁毒副作用小,安全,成本低。由于芦丁的生物利用度低,在临床上应用受到一定的限制。克服芦丁溶解性差的问题已经有各种方法,例如使用环糊精的络合,磷脂等,改善水溶性,从而增加生物利用度。本文综述了芦丁的多种潜在用途和治疗作用的信息,与药物输送相关的问题,以及改善药物生物利用度的可能方法。重点介绍了芦丁的抗炎、抗癌、降糖、对心血管的保护作用,为天然化合物的开发和利用奠定基础。     

铝氟联合中毒病人全血尿元素含量及相互关系的分析

取某病区明显骨软化畸形、年龄４～１９岁的病人晨尿、空腹全血,湿法消化,原子吸收法检测。结果表明,病人有小细胞贫血,脑电图未见有意义的异常波。血清磷、尿磷低于对照,全血磷显著升高,出现分离。全血钙并不低。全血和尿铝、氟显著高于对照。全血和尿锌显著或明显低于对照。病人与对照之间的全血铝与磷,镁、锌与铁相关性有显著差异。铝氟联合中毒康复者全血７种元素含量与对照接近,相关性也趋于一致。病人全血、尿元素含量     

Residue‐centric modeling and design of saccharide and glycoconjugate structures

The RosettaCarbohydrate framework is a new tool for modeling a wide variety of saccharide and glycoconjugate structures. This report describes the development of the framework and highlights its applications. The framework integrates with established protocols within the Rosetta modeling and design suite, and it handles the vast complexity and variety of carbohydrate molecules, including branching and sugar modifications. To address challenges of sampling and scoring, RosettaCarbohydrate can sample glycosidic bonds, side‐chain conformations, and ring forms, and it utilizes a glycan‐specific term within its scoring function. Rosetta can work with standard PDB, GLYCAM, and GlycoWorkbench (.gws ) file formats. Saccharide residue‐specific chemical information is stored internally, permitting glycoengineering and design. Carbohydrate‐specific applications described herein include virtual glycosylation, loop‐modeling of carbohydrates, and docking of glyco‐ligands to antibodies. Benchmarking data are presented and compared to other studies, demonstrating Rosetta's ability to predict glyco‐ligand binding. The framework expands the tools available to glycoscientists and engineers. © 2016 Wiley Periodicals, Inc.     

智能聚合物基材料富集磷酸化肽和糖肽的研究进展

翻译后修饰是蛋白质组学研究的前沿和重点,它不仅调节着蛋白质的折叠、状态、活性、定位以及蛋白质间的相互作用,也能帮助科学家更全面地了解生物体的生命过程,为疾病的预测、诊断和治疗提供更加强大的支撑和依据。翻译后修饰产物(例如磷酸化肽和糖肽)丰度很低,且存在着强烈的背景干扰,很难直接用质谱进行分析,因此迫切需要开发高效的富集材料和技术来选择性富集翻译后修饰产物。近年来,智能聚合物基材料通过外部物理、化学或生物刺激可逆地改变其结构和功能,实现对磷酸化肽和糖肽高度可控的吸附和脱附,进而衍生开发出一系列新颖的富集方法,极大地吸引研究者们的兴趣。一方面,智能聚合物基材料的响应变化包括材料疏水性的增加或减少、形状和形貌的改变、表面电荷的重新分布以及亲和配体的暴露或隐藏等特性。这些特性使得目标物和智能聚合物基材料之间的亲和力可以通过简单改变外部条件(如温度、pH值、溶剂极性和生物分子等)实现更可控和更智能的精细调节。另一方面,智能聚合物基材料为集成功能模块提供了便捷的可扩展平台,例如特定的识别组件,显著提高了目标物质的分离选择性。智能聚合物基材料在分离方面展现出巨大的潜力,这为蛋白质翻译后修饰产物的分析和研究带来了希望。围绕上述主题,该文依据Web of Science近20年来近50篇代表性文献,概述了智能聚合物基材料在磷酸化肽和糖肽分离及富集中的发展方向。