复合晶核剂对黄磷炉渣微晶玻璃析晶的影响

以黄磷炉渣为主要原料,通过添加不同种类的复合晶核剂,采用熔融法制备了黄磷炉渣微晶玻璃.借助化学热力学软件FactSage 6.4模拟计算晶相类型,借助Kissinger方程分析析晶能力,利用X射线衍射仪(XRD)和扫描电子显微镜(SEM)进行验证.结果表明:相比添加单一晶核剂TiO2,复合晶核剂TiO2+CaF2或复合晶核剂TiO2+P2O5均能够降低黄磷炉渣基础玻璃的析晶活化能E,促进其析晶,复合晶核剂TiO2+Cr2O3能够提高黄磷炉渣基础玻璃的析晶活化能E,抑制其析晶;无论添加单一晶核剂TiO2,还是添加复合晶核剂TiO2+CaF2、复合晶核剂TiO2+P2O5或复合晶核剂TiO2+Cr2O3,黄磷炉渣微晶玻璃晶相类型相同,主晶相为硅灰石(CaSiO3),副晶相为铝透辉石(Ca(Mg,Al)(Si,Al)2O6)和氟磷灰石(Ca5(PO4)3F),这与化学热力学软件FactSage 6.4模拟计算结果基本一致.     

TiO2对黄磷炉渣-滇池底泥微晶玻璃析晶的影响

利用自然冷却黄磷炉渣和滇池底泥为原料协同制备微晶玻璃.借助差热分析(DTA)、X射线衍射仪(XRD)、扫描电子显微镜(SEM)研究晶核剂TiO2对微晶玻璃析晶行为的影响.结果表明:随着TiO2添加量的增加,基础玻璃的析晶活化能E逐渐增加,析晶效果逐渐变差;TiO2的添加不改变微晶玻璃的晶相类型,其晶相均为镁黄长石(Ca2MgSi2O7)和钙黄长石(Ca2Al2SiO7);原料本身含有的TiO2就能促进黄磷炉渣-滇池底泥基础玻璃整体析晶,析晶活化能最小且性能最优.     

晶核剂P2O5对CaO-Al2O3-SiO2系黄磷炉渣微晶玻璃析晶的影响

采用熔融法以自然冷却黄磷炉渣为主要原料,P2O5为晶核剂,制备了黄磷炉渣微晶玻璃.利用X射线衍射仪(XRD)、差热分析(DTA)和扫描电子显微镜(SEM)等分析技术手段,探究了晶核剂P2O5(以KH2PO4的形式引入)对黄磷炉渣微晶玻璃晶化行为及物化性能的影响规律.结果表明:黄磷炉渣基础玻璃的析晶峰温度Tp及析晶活化能E随着P2O5晶核剂的增加呈现先减小后增大的趋势;当晶核剂P2O5加入量达到4wt;时,黄磷炉渣基础玻璃的析晶峰温度Tp及析晶活化能E最小,析晶效果最优,物化性能最优;主晶相硅灰石(CaSiO3)并不随着晶核剂P2O5加入量的增大而发生改变,同时能够促进晶相氟磷灰石(Ca5(PQ)3F)生成.     

晶核剂对锂锌硅系微晶玻璃析晶及显微结构的影响

采用差热分析方法研究了LZS系玻璃陶瓷的析晶动力学,讨论了晶核剂对微晶玻璃的晶相、显微结构及析晶动力学参数的影响.结果表明:与TiO2相比,P2O5能够更加有效地促进玻璃析晶,但两者效果相差不大.使用不同的晶核剂不会影响玻璃析出的晶相,但使用P2O5作为晶核剂能得到均匀细小的晶体.     

复合晶核剂CaF2和P2O5对黄磷炉渣微晶玻璃晶化行为影响

以自然冷却黄磷炉渣为主要原料,采用熔融法制备了黄磷炉渣微晶玻璃.利用FcatSage6.4热力学软件模拟计算了晶核剂元素F和P的热力学平衡状态;采用差热分析(DTA)、X射线衍射仪(XRD)和扫描电子显微镜(SEM)等研究了以CaF2和P2O5(以KH2PO4的形式引入)作为复合晶核剂对黄磷炉渣微晶玻璃晶化行为及性能的影响.结果表明:复合晶核剂CaF2+ P2O5加入量为0.98wt; +0.98wt;时,黄磷炉渣微晶玻璃的析晶活化能E最小,析晶效果最优;当温度达到1350℃时,62.46wt;的F存在于液渣相中,29.36wt;的F以固态纯物质的形式存在,8.18wt;的F以气体状态存在,P元素全部以固态纯物质Ca3(PO4)2的形式存在;随着CaF2和P2O5加入量的增大,主晶相的类型并不发生改变,均为B-硅灰石.     

TiO2对自然冷却黄磷炉渣微晶玻璃析晶行为的影响

以自然冷却黄磷炉渣为主要原料,采用熔融法制备CaO-Al2O3-SiO2系微晶玻璃,并借助DTA、XRD、SEM等分析了TiO2作为晶核剂对微晶玻璃析晶及其性能的影响规律.利用修正后的Johnson-Mehl-Avrami(JMA)方程初步计算微晶玻璃样品的析晶活化能E及晶体生长指数n.结果表明:自然冷却黄磷炉渣中固有的晶核剂可有效的促进CaO-Al2O3-SiO2系统的析晶,炉渣固有的TiO2可促进大量晶核的形成,晶化指数达到4.84,随着TiO2的加入,系统的析晶活化能由126.1483 kJ/mol增加到363.8206 kJ/mol,而晶化指数变为3.24.晶化机制由体积析晶变为二维析晶.主晶相的种类没有随TiO2量的增加而改变,均为硅灰石(CaSiO3)和钙铁辉石((Ca,Fe) SiO3).     

TiO2和Cr2O3作晶核剂对金矿尾砂微晶玻璃结晶性能的影响

以金矿尾砂为主要原料,方解石、硼砂等为添加原料,采用熔融法制备CaO-Al2O3-SiO2系微晶玻璃.采用X射线衍射分析(XRD)、差热分析(DSC)、扫描电镜(SEM)等分析手段对所制备样品进行性能测试与结构表征,研究了TiO2和Cr2O3对金矿尾砂微晶玻璃结晶性能的影响.结果表明,以2; TiO2为晶核剂,金矿尾砂微晶玻璃只有表面析晶,晶相从表面向内部生长;以4; TiO2为晶核剂,样品内部析出少量团聚晶体;以2; Cr2O3为晶核剂,样品内部析出少量团聚粒状晶体;以2; TiO2和2; Cr2O3为复合晶核剂,样品内部析出大量均匀分布的颗粒状晶体,极大地提高了金矿尾砂微晶玻璃的整体析晶能力,主晶相为透辉石(CaMgSi2O6),次晶相为钙长石(CaAl2Si2O8).     

高性能铁磁性微晶玻璃析晶机理及磁性研究

以白云鄂博东尾矿及粉煤灰等固体废弃物为主要原料制备得到了性能优异的微晶玻璃.利用X射线衍射仪(XRD)及高分辨率透射电镜(HRTEM)等测试手段揭示了微晶玻璃的形核及析晶过程.结果表明,热处理过程中磁铁矿晶核首先析出,主晶相辉石相可在磁铁矿晶核上生长.通过调整氧化铁含量可改变微晶玻璃的析晶、物化及磁学特性.随氧化铁含量的增加,微晶玻璃的析晶特性及物化性能均有所降低,但磁学特性有所提高.在高氧化铁含量的微晶玻璃中,磁铁矿相与辉石相可以同时存在,微晶玻璃的磁性主要来源于磁铁矿相.     

Nd3+∶ZnO-B2O3-Al2O3-SiO2系透明玻璃陶瓷的制备及表征

制备了Nd3+∶ZnO-B2O3-Al2O3-SiO2系透明玻璃陶瓷.运用差热分析(DTA)、X射线衍射(XRD)、扫描电镜(SEM)、NV-Vis-Nir(紫外可见近红外分光光度计)、傅里叶变换荧光光谱等测试方法,研究了晶核剂的含量对Nd3∶ZnO-B2O3-Al2O3-SiO2系透明玻璃陶瓷的核化和晶化性能的影响.利用修正的Kissinger方程研究了晶核剂对玻璃析晶动力学参数,析晶活化能E和析晶动力学判据k(Tp),利用Augis-Bennett方程计算出Avrami参数n.并分析其显微形貌同光透过率的关系,对光学性能进行了研究.     

CaO-MgO-Al2O3-SiO2系微晶玻璃复合晶核剂的优化及其对结构与性能的影响

以化学纯试剂CaO、MgO、Al2 O3和SiO2为主要原料,采用熔融法制备添加复合晶核剂Cr2 O3、Fe2 O3和CaF2的CaO-MgO-Al2 O3-SiO2 (CMAS)系微晶玻璃.采用正交试验的方法,确定复合晶核剂的相对最优配方.利用DTA、XRD、SEM和综合力学性能仪等手段,研究了复合晶核剂对该系微晶玻璃显微结构及性能的影响.结果表明,复合晶核剂的相对最优配方是Cr2 O3、Fe2 O3和CaF2的含量分别为0.5;、10;和8;,且复合晶核剂总含量的增加可以细化晶粒,随着晶粒细化,CMAS系微晶玻璃的维氏硬度增加.     

Relationship of Morphological Types of Dynamic Forms of Crystals

Crystallography Reports - The relationship of morphological spectra (sets of data on the morphological types of real polyhedral crystals and their probabilities under current physicochemical...     

Development of Pauling's concepts of geometric characteristics of atoms

The evolution of the geometric characteristics introduced by Pauling and their dependence on the specific features of the structure and chemical bonds have been considered. The values of the covalent and van der Waals radii are given as well as their relationships and mutual transitions.     

A review of measurement of thermophysical properties of silicon melt

Measurements of thermophysical properties of Si melt and supplementary study of X-ray scattering/diffraction by the authors' group were reviewed. The values obtained differed variously from those of literature. Density was 2–3% larger, surface tension 20–30% smaller, viscosity up to 40% larger, electrical conductivity 8% smaller, spectral emissivity more or less in good agreement with literature values, and thermal diffusivity a few percent larger. An anomalous density jump was found near the melting point. Surface tension and viscosity also showed anomaly. A strange time-dependent change of density was observed over 3 h after melting. X-ray analyses suggested a slight change in local atom ordering, but showed no sign of cluster formation. An addition of 0.1 at% gallium caused the density jump to disappear, while that of boron caused no change. An EXAFS study of the former melt indicated a strong interaction between Ga and Si atoms as if molecules of GaSi₃ existed. The implications of the measured properties are a possibility of soft-turbulence in an Si melt in a relatively large crucible, a more complicated manner of intake of oxygen depleted molten Si from the free surface region to underneath the growing crystal, and a relaxation of the melt after melting arising from trapped gas species.     

A SAXS study of kinetics of aggregation of silica sols

SAXS in situ experiments on the evolution of TMOS solutions during hydrolysis and polycondensation lead to power laws with scaling exponents ≈ 2. It is suggested that this could be the result of the polydispersity of the samples and that only an apparent fractal dimension can be obtained in this way. Kinetic studies tend to indicate that agglomeration in the sol is the result of a diffusion-controlled process.     

Generation of crystal structures of heteromolecular compounds by the method of discrete modeling of packings

Within the method of discrete modeling of packings, an algorithm of generation of possible crystal structures of heteromolecular compounds containing two or three molecules in the primitive unit cell, one of which has an arbitrary shape and the other (two others) has a shape close to spherical, is proposed. On the basis of this algorithm, a software package for personal computers is developed. This package has been approved for a number of compounds, investigated previously by X-ray diffraction analysis. The results of generation of structures of five compounds—four organic salts (with one or two spherical anions) and one solvate—are represented.     

Investigation of the Mechanism of Influence of Stress Corrosion on the Development of Macroplastic Instabilities of Aluminum–Magnesium Alloy

Crystallography Reports - Macroscopic jumps of plastic deformation (few percent in amplitude) on creep curves of aluminum–magnesium alloy, caused by a local effect of concentrated solution of...     

Study of the possibility of interactive control of the surface profile of X-ray optical elements

We investigate the possibility of controlling the curvature parameters of parabolic mirrors that are modular elements of two types consisting of a base and thin inserts placed at the opposite side of the work surface. In the first type of modular elements, bending is controlled by the difference in the coefficients of the thermal expansion of the base and inserts. In the second type of elements, the profile is changed by the piezoelectric straining of the inserts under an electric field. A correlation is established between the parameters of modular elements and their surface curvature profile.     

Mechanism of thermal expansion of structural modifications of zinc pyrovanadate

Crystal chemical characteristics of the α and β modifications of Zn₂V₂O₇ are calculated based on in situ high-temperature X-ray measurements. The expansion of the structure is found to be strongly anisotropic up to the negative volumetric thermal expansion of the α-Zn₂V₂O₇ unit cell in the temperature range of 300–600°С, α _V =–17.94 × 10^–6 1/K. The transformations of the “hard” and “soft” sublattices with an increase temperature and at the phase transition are considered in detail. It is shown that the negative volumetric thermal expansion of α-Zn₂V₂O₇ is due to the degeneracy of the zigzag-like shape of zinc–oxygen columns at constant distances between their vertices.     

Dependence of the parameters of equations of viscous flow on chemical composition of silicate melts

The temperature dependence of viscosity of silicate melts is discussed in the framework of the Avramov–Milchev (AM) equation. The composition is described by means of two parameters: the molar fraction, x, and the “lubricant fraction”, l. The molar fraction is the sum of the molar parts x_i of all oxides dissolved in SiO₂, the molar fraction of the latter being 1 ? x. It is shown that, with sufficient precision, two of the parameters of the AM equation can be presented as unique functions of the molar fraction. On the other hand, x is not sufficient to determine properly the reference temperature T_r , at which viscosity is η_r = 10¹³ [dPa.s]. Therefore, additional parameter, “lubricant fraction” l, is introduced. For each of the components, l_i is a product of molar part x_i and a specific dimensionless coefficient 0 ≤ k_i ≤ 1 accounting for the specific contribution of this component to the increased mobility of the system. It is demonstrated that, for l > 0, the reference temperature is related to the “lubricant fraction” l through the reference temperature T_r,SiO2 of pure SiO₂.     

Comparative analysis of two methods of calculation of the orientation of domain walls in ferroelastics

Two types of domain-wall equations are analyzed: the equations derived by the Sapriel method and the equations obtained by interface matching of the thermal-expansion tensor. It is shown that, for W-type domain walls, these methods yield the same equations. For W′-type domain walls, the equations obtained by different methods coincide for proper ferroelastics and differ for improper ferroelastics.