Differential Independence of <Emphasis Type="Italic">Γ</Emphasis> and <Emphasis Type="Italic">ζ</Emphasis>

In a celebrated theorem H?lder proved that the Euler Γ-function is differential transcendental, i.e. Γ(z) is not a solution of any (non-trivial) algebraic ordinary differential equation with coefficients that are complex numbers; and we extend his methods to the Riemann ζ-function. Moreover, we conjecture that Γ and ζ are differential independent, i.e. Γ(z) is not a solution of any such algebraic differential equation—even allowing coefficients that are differential polynomials in ζ(z). However, we are able to demonstrate only the partial result that Γ(z) and ζ(sin 2πz) are differential independent.     

Inequalities relating to Lp-version of Petty＇s conjectured projection inequality

Petty＇s conjectured projection inequality is a famous open problem in the theory of convex bodies. In this paper, it is shown that an inequality relating to Lp-version of the Petty＇s conjectured projection inequality is developed by using the notions of the Lp-mixed volume and the Lp-dual mixed volume, the relation of the Lp-projection body and the geometric body Г-pK, the Bourgain-Milman inequality and the Lp-Bnsemann-Petty inequality. In addition, for each origin-symmetric convex body, by applying the Jensen inequality and the monotonicity of the geometric body Г-pK, the reverses of Lp-version of the Petty＇s conjectured projection inequality and the Lp-Petty projection inequality are given, respectively.     

g-η-Monotone mapping and resolvent operator technique for solving generalized implicit variational-like inclusions

A new class of g-η-monotone mappings and a class of generalized implicit variational-like inclusions involving g-η-monotone mappings are introduced. The resolvent operator of g-η-monotone mappings is defined and its Lipschitz continuity is presented. An iterative algorithm for approximating the solutions of generalized implicit variational-like inclusions is suggested and analyzed. The convergence of iterative sequences generated by the algorithm is also proved.     

Navier–Stokes Equations: Almost <Emphasis Type="Italic">L</Emphasis><Subscript>3,∞</Subscript>-Case

A sufficient condition of regularity for solutions to the Navier–Stokes equations is proved. It generalizes the so-called L _3,∞-case.     

Variational Analysis of the Asymptotics of the <Emphasis Type="Italic">XY</Emphasis> Model

In this paper we consider the XY (N-dimensional possibly anisotropic) spin-type model and, by comparison with a Ginzburg–Landau-type functional, we perform a variational analysis in the limit when the number of particles diverges. In particular we show how the appearance of vortex-like singularities can be described by properly scaling the energy of the system through a Γ-convergence procedure. We also address the problem in the case of long-range interactions and solve it in two dimensions.     

<Emphasis Type="Italic">J</Emphasis><Subscript>2</Subscript> invariant relative orbits via differential correction algorithm

This paper describes a practical method for finding the invariant orbits in J ₂ relative dynamics. Working with the Hamiltonian model of the relative motion including the J ₂ perturbation, the effective differential correction algorithm for finding periodic orbits in three-body problem is extended to formation flying of Earth’s orbiters. Rather than using orbital elements, the analysis is done directly in physical space, which makes a direct connection with physical requirements. The asymptotic behavior of the invariant orbit is indicated by its stable and unstable manifolds. The period of the relative orbits is proved numerically to be slightly different from the ascending node period of the leader satellite, and a preliminary explanation for this phenomenon is presented. Then the compatibility between J ₂ invariant orbit and desired relative geometry is considered, and the design procedure for the initial values of the compatible configuration is proposed. The influences of measure errors on the invariant orbit are also investigated by the Monte–Carlo simulation. The project supported by the Innovation Foundation of Beihang University for Ph.D. Graduates, and the National Natural Science Foundation of China (60535010).     

Measurement of velocity profiles in a rectangular microchannel with aspect ratio <Emphasis Type="Italic">α</Emphasis> = 0.35

In this work, we measured 14 horizontal velocity profiles along the vertical direction of a rectangular microchannel with aspect ratio α = h/w = 0.35 (h is the height of the channel and w is the width of the channel) using microPIV at Re = 1.8 and 3.6. The experimental velocity profiles are compared with the full 3D theoretical solution, and also with a Poiseuille parabolic profile. It is shown that the experimental velocity profiles in the horizontal and vertical planes are in agreement with the theoretical profiles, except for the planes close to the wall. The discrepancies between the experimental data and 3D theoretical results in the center vertical plane are less than 3.6%. But the deviations between experimental data and Poiseuille’s results approaches 5%. It indicates that 2D Poiseuille profile is no longer a perfect theoretical approximation since α = 0.35. The experiments also reveal that, very near the hydrophilic wall (z = 0.5–1 μm), the measured velocities are significantly larger than the theoretical velocity based on the no-slip assumption. A proper discussion on some physical effects influencing the near wall velocity measurement is given.     

MODAL SYNTHESIS METHOD FOR NORM COMPUTATION OF H∞ DECENTRALIZED CONTROL SYSTEMS （ I ）

When using H∞ techniques to design decentralized controllers for large systems,the whole system is divided into subsystems, which are analysed using H∞ control theorybefore being recombined. An analogy was established with substructural analysis instructural mechanics, in which H∞ decentralized control theory corresponds to substructuralmodal synthesis theory so that the optimal H∞ norm of the whole system corresponds to thefundamental vibration frequency of the whole structure. Hence, modal synthesismethodology and the extended Wittrick-Williams algorithm were transplanted from structuralmechanics to compute the optimal H∞ norm of the control system. The orthogonality and theexpansion theorem of eigenfunctions of the subsystems H∞ control are presented in part(I) of the paper. The modal synthesis method for computation of the optimal H∞ norm ofdecentralized control systems and numerical examples are presented in part (Ⅱ).     

Solitary waves for power-law regularized long-wave equation and <Emphasis Type="Italic">R</Emphasis>(<Emphasis Type="Italic">m</Emphasis>,<Emphasis Type="Italic">n</Emphasis>) equation

This paper integrates the regularized long-wave equation with power-law nonlinearity using the solitary-wave ansatz. A few of the conserved quantities are calculated by using the 1-soliton solution. This technique is then extended to obtain the solitary-wave solution of the R(m,n) equation and a conserved quantity is also calculated for this generalized equation.     

On the <Emphasis Type="Italic">H</Emphasis><Superscript><Emphasis Type="Italic">s</Emphasis></Superscript> Theory of Hydrostatic Euler Equations

In this paper we study the two-dimensional hydrostatic Euler equations in a periodic channel. We prove the local existence and uniqueness of H ^s solutions under the local Rayleigh condition. This extends Brenier’s (Nonlinearity 12(3):495–512, 1999) existence result by removing an artificial condition and proving uniqueness. In addition, we prove weak–strong uniqueness, mathematical justification of the formal derivation and stability of the hydrostatic Euler equations. These results are based on weighted H ^s a priori estimates, which come from a new type of nonlinear cancellation between velocity and vorticity.     

Torus generated by <Emphasis Type="Italic">Escherichia coli</Emphasis>

The bioluminescence images of unstirred cultures show that lux reporter E. coli (0.10 mg biomass per ml of the broth medium) in 6.4–10 mm diameter circular containers induce center-fluid-rising toroidal convection of ≤1 mm/min. The bioconvective torus is stable in a Teflon vessel and is deformed by 3.2–4.4 mm wavelength azimuthal waves in polystyrene or glass vessels.     

The effect of 1,3:2,4-<Emphasis Type="Italic">bis</Emphasis>-<Emphasis Type="Italic">O</Emphasis>-(<Emphasis Type="Italic">p</Emphasis>-methylbenzylidene)-<Emphasis Type="SmallCaps">d</Emphasis>-sorbitol (PDTS) on uniaxial elongational viscosity of polypropylene

We investigated the dynamic viscoelasticity and elongational viscosity of polypropylene (PP) containing 0.5 wt% of 1,3:2,4-bis-O-(p-methylbenzylidene)-d-sorbitol (PDTS). The PP/PDTS system exhibited a sol–gel transition (T _gel) at 193 °C. The critical exponent n was nearly equal to 2/3, in agreement with the value predicted by a percolation theory. This critical gel is due to a three-dimensional network structure of PDTS crystals. The elongational viscosity behavior of neat PP followed the linear viscosity growth function 3η ⁺ (t), where η ⁺ (t) is the shear stress growth function in the linear viscoelastic region. The elongational viscosity of the PP/PDTS system also followed the 3η ⁺ (t) above T _gel but did not follow the 3η ⁺ (t) and exhibited strong strain-softening behavior below T _gel. This strain softening can be attributed to breakage of the network structure of PDTS with a critical stress (σ _c) of about 10⁴ Pa.     

Modeling of Breakthrough Curves for Adsorption of Propane, <Emphasis Type="Italic">n</Emphasis>-Butane,and Iso-Butane Mixture on 5A Molecular Sieve Zeolite

Breakthrough curves for the adsorption of propane, n-butane, and iso-butane mixture on 5A molecular sieve zeolite were obtained experimentally and theoretically at a constant temperature of 301 K. The equilibrium model and linear driving force model were used to predict the experimental breakthrough curves for this multicomponent mixture. The equilibrium model gave a satisfactory fit for experimental data. The model equations were solved by a numerical method based on backward finite difference with a fixed griding technique. The effects of feed flow rate (0.552–3.496 l/min), feed concentration (60.72–141.68 mmol/l), and adsorbates composition (58.75–75.32%) on these breakthrough curves were examined.     

Green’s function for T-stress of semi-infinite plane crack

Green’s function for the T-stress near a crack tip is addressed with an analytic function method for a semi-infinite crack lying in an elastical, isotropic, and infinite plate. The cracked plate is loaded by a single inclined concentrated force at an interior point. The complex potentials are obtained based on a superposition principle, which provide the solutions to the plane problems of elasticity. The regular parts of the potentials are extracted in an asymptotic analysis. Based on the regular parts, Gre...     

<Emphasis Type="Italic">L</Emphasis><Superscript>2</Superscript> Formulation of Multidimensional Scalar Conservation Laws

We show that Kruzhkov’s theory of entropy solutions to multidimensional scalar conservation laws (Kruzhkov in Mat Sb (N.S.), 81(123), 228–255, 1970) can be entirely recast in L ² and fits into the general theory of maximal monotone operators in Hilbert spaces. Our approach is based on a combination of level-set, kinetic and transport-collapse approximations, in the spirit of previous works by Brenier (in C R Acad Sci Paris Ser I Math, 292, 563–566, 1981; in J Diff Equ, 50, 375–390, 1983; in SIAM J Numer Anal, 21, 1013–1037; in Methods Appl Anal, 11, 515–532, 2004), Giga and Miyakawa (in Duke Math J, 50, 505–515, 1983), and Tsai et al. (in Math Comp, 72, 159–181, 2003).     

Asymptotic properties of solutions of an equation of order <Emphasis Type="Italic">n</Emphasis> with almost constant coefficients and pulse action

We investigate the asymptotic behavior of solutions of linear differential equations with almost constant coefficients and pulse action at fixed times as t tends to infinity. We establish conditions for the times of pulse action under which there exist values of pulse action for which the solution of the considered Cauchy problem with initial conditions that coincide with the initial conditions for a certain (arbitrary but fixed) solution of the original equation without pulse action is bounded, unbounded, or tending to infinity. __________ Translated from Neliniini Kolyvannya, Vol. 8, No. 4, pp. 444–455, October–December, 2005.     

An experimental—Numerical evaluation of the<Emphasis Type="Italic">T</Emphasis><Stack><Subscript>ε</Subscript><Superscript>*</Superscript></Stack> integral for a three-dimensional crack front

TheT _ε ^* integral was calculated on the surface of single edge notched, three-point bend (SE(B)) specimens using experimentally obtained displacements. Comparison was made withT _ε ^* calculated with the measured surface displacements andT _ε ^* calculated at several points through the thickness of a finite element (FE) model of the SE(B) specimen. Good comparison was found between the surfaceT _ε ^* calculated from displacements extracted from the FE model and the surfaceT _ε ^* calculated from experimentally obtained displacements. The computedT _ε ^* integral was also observed to decrease as the crack front was traversed from the surface to the mid-plane of the specimen. Mid-planeT _ε ^* values tend to be approximately 10% of the surface values.     

Assessment of <Emphasis Type="Italic">Σ−Y</Emphasis><Subscript>liq</Subscript> model predictions for air-assisted atomisation

In a series of recent works, R. Borghi and co-workers proposed a new Eulerian model of two-phase turbulent flows which introduced a transport equation for the average area of the liquid–gas interface. This work is devoted to the assessment of this model’s ability to predict the effects of liquid properties and injection regimes on the atomisation quality. Air-assisted atomisation, for which extensive experimental data are available, is chosen as a test case. It is shown that the model predictions are in good agreement with the observed trends for a wide range of variations of the liquid properties, such as density and surface tension, as well as the injection regimes, defined by the liquid and gas jet exit velocities.      

Reduction of<Emphasis Type="Italic">K</Emphasis><Subscript>I</Subscript> and<Emphasis Type="Italic">K</Emphasis><Subscript>II</Subscript> by the shape-memory effect in a TiNi shape-memory fiber-reinforced epoxy matrix composite

Shape-memory TiNi fiber-reinforced/epoxy matrix composites have been fabricated, and the suppression of crack-tip stress intensity and the change in fracture toughness have been systematically investigated. Stress-strain data for these composite specimens with notches at various angles and different crack lengths in the transverse direction have been measured in tensile tests. The stress intensity factor at the crack tip is experimentally determined from photoelastic fringe patterns. The decreases inK values are attributed to the compressive stress field in the matrix induced when the pre-strains of the TiNi fiber contract to their initial length upon heating above the austenitic final temperature. We present the influences of the pre-strain of TiNi fibers and the compressive domain size between a crack tip and fiber on theK value.     

MODAL SYNTHESIS METHOD FOR NORM COMPUTATION OF H∞ DECENTRALIZED CONTROL SYSTEMS （II）

When using H∞ techniques to design decentralized controllers for large systems, the whole system is divided into subsystems, which are analysed using H∞ control theorybefore being recombined. An analogy was established with substructural analysis instructural mechanics, in which H∞ decentralized control theory corresponds to substructuralmodal synthesis theory so that the optimal H∞ norm of the whole system corresponds to thefundamental vibration frequency of the whole structure. Hence, modal synthesismethodology and the extended Wittrick-Williams algorithm were transplanted from structuralmechanics to compute the optimal H∞ norm of the control system. The orthogonality and theexpansion theorem of eigenfunctions of the subsystems H~ control are presented in part (I)of the paper. The modal synthesis method for computation of the optimal H∞ norm ofdecentralized control systems and numerical examples are presented in part (Ⅱ).