二阶非自伴两点边值问题Garlerkin有限元的超收敛算法

提出了基于改进位移模式的二阶非自伴两点边值问题Garlerkin有限元的超收敛算法. 用常规有限元解的位移模式与高阶有限元解的位移模式之和构造新的位移模式,基于Garlerkin 方法,采用积分形式推导了单元平衡方程. 对于线性单元,本文给出了有代表性的算例,结点和单元的位移、导数都达到了h⁴阶的超收敛精度.     

A New Stable Bubble Element for Incompressible Fluid Flow Based on a Mixed Petrov–Galerkin Finite Element Formulation

A new mixed Petrov–Galerkin formulation employing the MINI element with a non-confirming bubble function for an incompressible media governed by the Stokes equations, which is equivalent to the stabilized finite element by P ¹-P ¹ approximation, is proposed. The new formulation possesses better stability properties than the conventional Bubnov–Galerkin formulation employing the MINI element. In this aspect, the stabilizing effect of this formulation is evaluated by a stabilizing parameter determined by both shapes of the trial and the weighting bubble functions.     

A spectral‐element discontinuous Galerkin thermal lattice Boltzmann method for conjugate heat transfer applications

We present a spectral‐element discontinuous Galerkin thermal lattice Boltzmann method for fluid–solid conjugate heat transfer applications. Using the discrete Boltzmann equation, we propose a numerical scheme for conjugate heat transfer applications on unstructured, non‐uniform grids. We employ a double‐distribution thermal lattice Boltzmann model to resolve flows with variable Prandtl (Pr) number. Based upon its finite element heritage, the spectral‐element discontinuous Galerkin discretization provides an effective means to model and investigate thermal transport in applications with complex geometries. Our solutions are represented by the tensor product basis of the one‐dimensional Legendre–Lagrange interpolation polynomials. A high‐order discretization is employed on body‐conforming hexahedral elements with Gauss–Lobatto–Legendre quadrature nodes. Thermal and hydrodynamic bounce‐back boundary conditions are imposed via the numerical flux formulation that arises because of the discontinuous Galerkin approach. As a result, our scheme does not require tedious extrapolation at the boundaries, which may cause loss of mass conservation. We compare solutions of the proposed scheme with an analytical solution for a solid–solid conjugate heat transfer problem in a 2D annulus and illustrate the capture of temperature continuities across interfaces for conductivity ratio γ > 1. We also investigate the effect of Reynolds (Re) and Grashof (Gr) number on the conjugate heat transfer between a heat‐generating solid and a surrounding fluid. Steady‐state results are presented for Re = 5?40 and Gr = 10⁵?10⁶. In each case, we discuss the effect of Re and Gr on the heat flux (i.e. Nusselt number Nu) at the fluid–solid interface. Our results are validated against previous studies that employ finite‐difference and continuous spectral‐element methods to solve the Navier–Stokes equations. Copyright © 2016 John Wiley & Sons, Ltd.     

A triangular quasi-conforming finite element for transient dynamic analysis

A type of 3 node triangular element is constructed by the Quasi-conforming method, which may be used to solve the equation of a type of inverse problem of wave propagation after Laplace transformation Δu−A ² u=0. The strains in the element are approximated by an exponential function and the string-net function between neighbouring elements is approximated by one dimensional general solution of the equation. Furthermore the strain field satisfies the equation, and therefore in the derivation of the element formulation, no shape function is needed. In this sense, it is a kind of hybrid element. Compared with the ordinary linear triangular element, the new one features higher precision with coarse meshes. Some numerical tests are presented. The project is supported by the National Natural Science Foundation of China.     

Finite element implementation of boundary conditions for the pressure Poisson equation of incompressible flow

In this paper we address the problem of the implementation of boundary conditions for the derived pressure Poisson equation of incompressible flow. It is shown that the direct Galerkin finite element formulation of the pressure Poisson equation automatically satisfies the inhomogeneous Neumann boundary conditions, thus avoiding the difficulty in specifying boundary conditions for pressure. This ensures that only physically meaningful pressure boundary conditions consistent with the Navier-Stokes equations are imposed. Since second derivatives appear in this formulation, the conforming finite element method requires C¹ continuity. However, for many problems of practical interest (i.e. high Reynolds numbers) the second derivatives need not be included, thus allowing the use of more conventional C⁰ elements. Numerical results using this approach for a wall-driven contained flow within a square cavity verify the validity of the approach. Although the results were obtained for a two-dimensional problem using the p-version of the finite element method, the approach presented here is general and remains valid for the conventional h-version as well as three-dimensional problems.     

High‐order 𝒞1 finite‐element interpolating schemes—Part I: Semi‐Lagrangian linear advection

This paper is devoted to the development of accurate high‐order interpolating schemes for semi‐Lagrangian advection. The characteristic‐Galerkin formulation is obtained by using a semi‐Lagrangian temporal discretization of the total derivative. The semi‐Lagrangian method requires high‐order interpolators for accuracy. A class of ??¹ finite‐element interpolating schemes is developed and two semi‐Lagrangian methods are considered by tracking the feet of the characteristic lines either from the interpolation or from the integration nodes. Numerical stability and analytical results quantifying the amount of artificial viscosity induced by the two methods are presented in the case of the one‐dimensional linear advection equation, based on the modified equation approach. Results of test problems to simulate the linear advection of a cosine hill illustrate the performance of the proposed approach. Copyright © 2007 John Wiley & Sons, Ltd.     

Efficient computation of mean drag for the subcritical flow past a circular cylinder using general Galerkin G2

General Galerkin (G2) is a new computational method for turbulent flow, where a stabilized Galerkin finite element method is used to compute approximate weak solutions to the Navier–Stokes equations directly, without any filtering of the equations as in a standard approach to turbulence simulation, such as large eddy simulation, and thus no Reynolds stresses are introduced, which need modelling. In this paper, G2 is used to compute the drag coefficient c_D for the flow past a circular cylinder at Reynolds number Re=3900, for which the flow is turbulent. It is found that it is possible to approximate c_D to an accuracy of a few percent, corresponding to the accuracy in experimental results for this problem, using less than 10⁵ mesh points, which makes the simulations possible using a standard PC. The mesh is adaptively refined until a stopping criterion is reached with respect to the error in a chosen output of interest, which in this paper is c_D. Both the stopping criterion and the mesh‐refinement strategy are based on a posteriori error estimates, in the form of a space–time integral of residuals times derivatives of the solution of a dual problem, linearized at the approximate solution, and with data coupling to the output of interest. Copyright © 2008 John Wiley & Sons, Ltd.     

An indirect shooting method based on the POD/DEIM technique for distributed optimal control of the wave equation

This paper presents a fast numerical method, based on the indirect shooting method and Proper Orthogonal Decomposition (POD) technique, for solving distributed optimal control of the wave equation. To solve this problem, we consider the first‐order optimality conditions and then by using finite element spatial discretization and shooting strategy, the solution of the optimality conditions is reduced to the solution of a series of initial value problems (IVPs). Generally, these IVPs are high‐order and thus their solution is time‐consuming. To overcome this drawback, we present a POD indirect shooting method, which uses the POD technique to approximate IVPs with smaller ones and faster run times. Moreover, in the presence of the nonlinear term, to reduce the order of the nonlinear calculations, a discrete empirical interpolation method (DEIM) is applied and a POD/DEIM indirect shooting method is developed. We investigate the performance and accuracy of the proposed methods by means of 4 numerical experiments. We show that the presented POD and POD/DEIM indirect shooting methods dramatically reduce the CPU time compared to the full indirect shooting method, whereas there is no significant difference between the accuracy of the reduced and full indirect shooting methods.     

SUPG finite element method based on penalty function for lid-driven cavity flow up to $$Re = 27500$$

A streamline upwind/Petrov–Galerkin(SUPG)finite element method based on a penalty function is proposed for steady incompressible Navier–Stokes equations.The SUPG stabilization technique is employed for the formulation of momentum equations. Using the penalty function method, the continuity equation is simplified and the pressure of the momentum equations is eliminated. The lid-driven cavity flow problem is solved using the present model. It is shown that steady flow simulations are computable up to Re = 27500, and the present results agree well with previous solutions. Tabulated results for the properties of the primary vortex are also provided for benchmarking purposes.     

Finite Element Analysis of Unsteady Natural Convection

In this study, a new finite element method (the MSR-method) is proposed for unsteady three-dimensional thermal-fluid analyses. This method is a combination of a modified Galerkin method (MGM) and the SIMPLER formulation. In the MSR-method the velocity and pressure are computed using the SIMPLER procedure and the approximate velocity and the energy equation are solved using the MGM. In the MGM, the inertia term and the pressure term are considered explicitly, so only the symmetrical matrixes appear. Then an artificial viscosity is introduced through an error analysis approach to improve its accuracy and stability. In this paper, the natural convection problems in a three-dimensional cavity are simulated up to the Rayleigh number of 10⁸, and converged solutions are obtained. Authors confirmed that our proposed method gives reasonable results for these problems comparing with other research works.     

A postprocessing mixed finite element method for the Navier–Stokes equations

A fully discrete postprocessing mixed finite element scheme is considered for solving the time-dependent Navier–Stokes equations. In the PP method, we only consider a non-linear equation in the coarse-level subspace and a linear problem in the fine-level subspace. The analysis shows that the PP scheme can reach the same accuracy as the standard Galerkin method with a very fine mesh size h by an appropriate choice of H. Numerical examples are provided that confirm both the theoretical analysis and the corresponding improvement in computational efficiency.     

一维Ritz有限元EEP超收敛位移计算简约格式的直接推导与证明

一维Ritz有限元后处理超收敛计算的EEP(单元能量投影)法简约格式中,若问题和解答足够光滑,其m(1)次单元的超收敛位移解在单元内任一点均可以达到至少hm+2的超收敛阶。对此,本文提出一套全新的推证方法,通过对单元能量投影的等效变形,直接推导出EEP简约格式位移解的计算公式及其误差项,进而采用更为简单通用的数学证明方法,证明了这一超收敛性。     

A high‐order element‐based Galerkin method for the barotropic vorticity equation

A high‐order element‐based Galerkin method is developed to solve the non‐divergent barotropic vorticity equation (BVE). The solution process involves solving a conservative transport equation for the vorticity fields and a Poisson equation for the stream function fields. The discontinuous Galerkin method is employed for solving the transport equation and a spectral element method (continuous Galerkin) is used for the Poisson equation. A third‐order strong stability preserving explicit Runge–Kutta scheme is used for time integration. A series of tests have been performed to validate the model, which include the evolution of an idealized tropical cyclone and interaction of dual vortices in close proximity. The numerical convergence study is performed by solving the BVE on the sphere where the analytic solution is known. The test results are consistent with physical observations, and the model exhibits exponential convergence. Copyright © 2008 John Wiley & Sons, Ltd.     

Adaptive finite element method for an optimal control problem of Stokes flow with L2‐norm state constraint

An adaptive finite element approximation for an optimal control problem of the Stokes flow with an L²‐norm state constraint is proposed. To produce good adaptive meshes, the a posteriori error estimates are discussed. The equivalent residual‐type a posteriori error estimators of the H ¹‐error of state and L²‐error of control are given, which are suitable to carry out the adaptive multi‐mesh finite element approximation. Some numerical experiments are performed to illustrate the efficiency of the a posteriori estimators. Copyright © 2011 John Wiley & Sons, Ltd.     

Stabilized Bubble Function Method for Shallow Water Long Wave Equation

A relationship between the stabilized bubble function method and the stabilized finite element method is shown in this paper. The Petrov–Galerkin formulation with bubble function, i.e. a stabilized bubble function method, is proposed for the shallow water long wave equation. The Petrov–Galerkin formulation with the bubble function formulation possesses better stability than the Bubnov–Galerkin formulation with the bubble function.     

A multi‐dimensional monotonic finite element model for solving the convection–diffusion‐reaction equation

In this paper, we develop a finite element model for solving the convection–diffusion‐reaction equation in two dimensions with an aim to enhance the scheme stability without compromising consistency. Reducing errors of false diffusion type is achieved by adding an artificial term to get rid of three leading mixed derivative terms in the Petrov–Galerkin formulation. The finite element model of the Petrov–Galerkin type, while maintaining convective stability, is modified to suppress oscillations about the sharp layer by employing the M‐matrix theory. To validate this monotonic model, we consider test problems which are amenable to analytic solutions. Good agreement is obtained with both one‐ and two‐dimensional problems, thus validating the method. Other problems suitable for benchmarking the proposed model are also investigated. Copyright © 2002 John Wiley & Sons, Ltd.     

A Bubble Element for the Compressible Euler Equations

In this paper, we present a new Galerkin finite element method with bubble function for the compressible Euler equations. This method is derived from the scaled bubble element for the advection-diffusion problems developed by Simo and his colleagues, which is based on the equivalence between the Galerkin method employing piecewise linear interpolation with bubble functions and the Streamline-Upwind/Petrov Galerkin (SUPG) finite element method using P₁ approximation in the steady advection-diffusion problem. Simo and this author have applied this approach to transient advection-diffusion problems by using a special scaled bubble function called P-scaled bubble, which is designed to work in the transient advection-diffusion problems for any Peclet number from 0 to ∞. The method presented in this paper is an application of this p-scaled bubble element to a pure hyperbolic system.     

H 1 space-time discontinuous finite element method for convection-diffusion equations

An H~1 space-time discontinuous Galerkin (STDG) scheme for convectiondiffusion equations in one spatial dimension is constructed and analyzed. This method is formulated by combining the H~1 Galerkin method and the space-time discontinuous finite element method that is discontinuous in time and continuous in space. The existence and the uniqueness of the approximate solution are proved. The convergence of the scheme is analyzed by using the techniques in the finite difference and finite element methods. An optimal a-priori error estimate in the L~∞ (H~1 ) norm is derived. The numerical exper- iments are presented to verify the theoretical results.     

Forced convection heat transfer at the boundary layer of a packed bed

Numerical investigations of the nature of the fluid flow pattern and heat transfer at the boundary layer of a packed bed are reported. A volume averaged Navier-Stokes equation is used to predict the fluid flow and a volume averaged heat balance equation the heat transfer. A variable porosity in the packing is assumed in the region near the wall. Simulations are performed using a modified penalty Galerkin finite element method. The case of fully developed hydrodynamic flow and developing thermal flow is studied. The Nusselt number is found to depend on the Reynolds number, Graetz number and ratio of thermal conductivity of the solid and fluid phases. Comparison is made to some experimental literature values.Nomenclature A constant - [A] Navier-Stokes type matrix - B constant - [B] divergence matrix - C _p constant pressure heat capacity - d characteristic length - D _p particle diameter - D _t tube diameter - {F} solicitation vector - Gz Graetz number, z D _t ^–1 Pr _f Re _p - k permeability term - k _f Thermal conductivity of the fluid phase - k _s Thermal conductivity of the solid phase - [K] coefficient matrix for temperature equation - n normal vector - P pressure - Pr _f Prandtl number for the fluid _f C _p k _f ^-1 - r radial coordinate - R _t tube radius - R residual - R _m residual - Re _p Reynolds number for particle, - t tortuosity factor - T temperature - interstitial velocity - z axial coordinate - effective thermal conductivity - penalty parameter - boundary of solution domain - porosity - viscosity - density - test function - solution domain - test function     

APPLICATION OF THE DUAL RECIPROCITY BOUNDARY ELEMENT METHOD TO SOLUTION OF NONLINEAR DIFFERENTIAL EQUATION

In this paper the dual reciprocity boundary element method is employed to solve nonlinear differential equation ∇² u+u+ɛu ³ =b. Results obtained in an example have a good agreement with those by FEM and show the applicability and simplicity of dual reciprocity method(DRM)in solving nonlinear differential equations.