Exact solutions of two semi-infinite collinear cracks in piezoelectric strip

Using the complex variable function method and the conformal mapping technique,the fracture problem of two semi-infinite collinear cracks in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load on the partial crack surface.Analytic solutions of the field intensity factors and the mechanical strain energy release rate are derived under the assumption that the surfaces of the crack are electrically impermeable.The results can be reduced to the well-known solutio...     

Electrical nonlinear anti-plane shear crack in a functionally graded piezoelectric strip

The electrical nonlinear behavior of an anti-plane shear crack in a functionally graded piezoelectric strip is studied by using the strip saturation model within the framework of linear electroelasticity. The analysis is conducted on the electrically unified crack boundary condition with the introduction of the electric crack condition parameter that can describe all the electric crack boundary condition in accordance with the aspect ratio of an ellipsoidal crack and the permittivity inside the crack, in particular, including traditional permeable and impermeable crack boundary conditions. The resulting mixed boundary value problem is analysed and near tip field is obtained by using the integral transform techniques. Numerical results for the normalized five kinds of energy release rates under the small scale electric saturation condition are presented and compared to show the influences of the electric crack condition parameter with the variation of the ellipsoidal crack parameters, electric loads, functionally graded piezoelectric material gradation, crack length, electromechanical coupling coefficient, and crack location. It reveals that there are considerable differences between the results obtained from the traditional electric crack models and those obtained from the current unified crack model.     

Anti-plane analysis of semi-infinite crack in piezoelectric strip

Using the complex variable function method and the technique of the conformal mapping, the fracture problem of a semi-infinite crack in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load. The analytic solutions of the field intensity factors and the mechanical strain energy release rate are presented under the assumption that the surface of the crack is electrically impermeable. When the height of the strip tends to infinity, the analytic solutions of an infinitely large piezoelectric solid with a semi-infinite crack are obtained. Moreover, the present results can be reduced to the well-known solutions for a purely elastic material in the absence of the electric loading. In addition, numerical examples are given to show the influences of the loaded crack length, the height of the strip, and the applied mechanical/electric loads on the mechanical strain energy release rate.     

一维六方准晶中纳米尺度开裂孔洞的III型断裂力学

研究了一维六方准晶中纳米尺度开裂孔洞的Ⅲ型断裂力学问题。基于复变弹性理论和表面弹性理论获得了考虑表面效应时椭圆孔边裂纹的应力场、应力强度因子和能量释放率的解析表达；讨论了缺陷尺寸、裂纹/孔洞比、耦合系数和施加载荷对应力强度因子和能量释放率的影响。研究表明：考虑表面效应且缺陷的尺寸在纳米尺度时，声子场和相位子场的无量纲应力强度因子以及无量纲能量释放率具有明显的尺寸依赖；裂纹相对尺寸较小时，表面效应对声子场和相位子场的无量纲应力强度因子影响较小；纳米尺度时无量纲能量释放率随耦合系数的增加而增大；耦合系数一定时，无量纲能量释放率受到椭圆孔尺寸影响；随着声子场载荷的增大，无量纲能量释放率先减小后增加，最后趋于稳定；无量纲能量释放率随相位子场载荷的增大单调减小，非常小和非常大的声子场载荷(或相位子场载荷)屏蔽了相位子场载荷(或声子场载荷)的影响。     

一维六方准晶中纳米尺度开裂孔洞的III型断裂力学

研究了一维六方准晶中纳米尺度开裂孔洞的Ⅲ型断裂力学问题。基于复变弹性理论和表面弹性理论获得了考虑表面效应时椭圆孔边裂纹的应力场、应力强度因子和能量释放率的解析表达;讨论了缺陷尺寸、裂纹/孔洞比、耦合系数和施加载荷对应力强度因子和能量释放率的影响。研究表明：考虑表面效应且缺陷的尺寸在纳米尺度时,声子场和相位子场的无量纲应力强度因子以及无量纲能量释放率具有明显的尺寸依赖;裂纹相对尺寸较小时,表面效应对声子场和相位子场的无量纲应力强度因子影响较小;纳米尺度时无量纲能量释放率随耦合系数的增加而增大;耦合系数一定时,无量纲能量释放率受到椭圆孔尺寸影响;随着声子场载荷的增大,无量纲能量释放率先减小后增加,最后趋于稳定;无量纲能量释放率随相位子场载荷的增大单调减小,非常小和非常大的声子场载荷(或相位子场载荷)屏蔽了相位子场载荷(或声子场载荷)的影响。     

Electroelastic field for an impermeable anti-plane shear crack in a piezoelectric ceramics plate

Electroelastic behavior of a cracked piezoelectric ceramics plate subjected to four cases of combined mechanical-electrical loads is analyzed. The integral transform method is applied to convert the problem involving an impermeable anti-plane crack to dual integral equations. Solving the resulting equations, the explicit analytic expressions for electroelastic field along the crack line and the intensity factors of relevant quantities near the crack tip and the mechanical strain energy release rate are obtained. The known results for an infinite piezoelectric ceramics plane containing an impermeable anti-plane crack are recovered from the present results only if the thickness of the plate h → ∞. Biography: LI Xian-fang (1964-)     

An anti-plane propagating crack in a functionally graded piezoelectric strip bonded to a homogeneous piezoelectric strip

Summary A finite crack propagating at constant speed in a functionally graded piezoelectric strip (FGPS) bonded to a homogeneous piezoelectric strip is considered. It is assumed that the electroelastic material properties of the FGPS vary exponentially across the thickness of the strip, and that the bimaterial strip is under combined anti-plane mechanical shear and in-plane electrical loads. The analysis is conducted for the electrically unified crack boundary condition, which includes both the traditional permeable and the impermeable ones. By using the Fourier transform, the problem is reduced to the solution of Fredholm integral equations of the second kind. Numerical results for the stress intensity factor and the crack sliding displacement are presented to show the influences of the crack propagation speed, electric loads, FGPS gradation, crack length, electromechanical coupling coefficient, properties of the bonded homogeneous piezoelectric strip and crack location.     

Fracture behavior of a bonded magneto-electro-elastic rectangular plate with an interface crack

In this paper the anti-plane problem for an interface crack between two dissimilar magneto-electro-elastic plates subjected to anti-plane mechanical and in-plane magneto-electrical loads is investigated. The interface crack is assumed to be either magneto-electrically impermeable or permeable, and the position of the interface crack is arbitrary. The finite Fourier transform method is employed to reduce the mixed boundary-value problem to triple trigonometric series equations. The dislocation density functions and proper replacement of the variables are introduced to reduce these series equations to a standard Cauchy singular integral equation of the first kind. The resulting integral equation together with the corresponding single-valued condition is approximated as a system of linear algebra equations which can be easily solved. Field intensity factors and energy release rates are determined numerically and discussed in detail. Numerical results show the effects of crack configuration and loading combination parameters on the fracture behaviors of crack tips according to energy release rate criterion. The study of this problem is expected to have applications to the investigation of dynamic fracture properties of magneto-electro-elastic materials with cracks.     

Fracture of piezoelectromagnetic materials

The crack problem in a medium possessing coupled piezoelectric, piezomagnetic and magnetoelectric effects is considered. A conservative integral is derived based on the governing equations for magnetoelectroelastic media. Closed-form solution is obtained for an anti-plane crack in an infinite medium. The conservative integral is used to obtain the path-independent integral near the crack tip. Expressions for stresses, electric displacements and magnetic inductions in the vicinity of a crack tip are derived. It is found that the path-independent integral around the crack tip equals the energy release rate. In the absence of applied mechanical loads, the energy release rate is always negative.     

ELECTROELASTIC FIELD FOR AN IMPERMEABLE ANTI-PLANE SHEAR CRACK IN A PIEZOELECTRIC CERAMICS PLATE

ＩｎｔｒｏｄｕｃｔｉｏｎＤｕｅｔｏｔｈｅｉｎｔｒｉｎｓｉｃｃｏｕｐｌｉｎｇｃｈａｒａｃｔｅｒｉｓｔｉｃｓｂｅｔｗｅｅｎｅｌｅｃｔｒｉｃａｎｄｅｌａｓｔｉｃｂｅｈａｖｉｏｒｓ,ｔｈａｔｉｓ,ａｐｐｌｉｅｄｍｅｃｈａｎｉｃａｌｌｏａｄｉｎｇｐｒｏｄｕｃｅｓｅｌａｓｔｉｃｄｅｆｏｒｍａｔｉｏｎ ,ａｓｗｅｌｌａｓｅｌｅｃｔｒｉｃｆｉｅｌｄ ,ａｎｄｃｏｎｖｅｒｓｅｌｙｅｌｅｃｔｒｉｃｆｉｅｌｄｃａｎｇｉｖｅｒｉｓｅｔｏｅｌａｓｔｉｃｄｅｆｏｒｍａｔｉｏｎ ,ｐｉｅｚｏｅｌｅｃｔｒｉｃｍａｔｅｒｉａｌｓｈａｖｅ…     

Anti-plane analysis of multiple cracks originating from a circular hole in a magnetoelectroelastic solid

The anti-plane problem of multiple cracks originating from a circular hole in a magnetoelectroelastic solid is investigated under remotely uniform anti-plane mechanical loading and in-plane electromagnetic loadings. The boundary value problem is reduced to a Cauchy integral equation by a new mapping function and the complex variable method, which is further solved exactly. The analytic expressions of the complex potentials, the field intensity factors and the energy release rate are derived in closed-form under the assumption that the surfaces of the cracks and hole are both electrically and magnetically impermeable. The effects of crack configurations and combined loadings on the energy release rate are shown graphically. Several useful results which may have potential applications to the design and fracture analysis of magnetoelectroelastic structures are given.     

Moving eccentric crack in a piezoelectric strip bonded to elastic materials

Summary  The steady-state of a propagation eccentric crack in a piezoelectric ceramic strip bonded between two elastic materials under combined anti-plane mechanical shear and in-plane electrical loadings is considered in this paper. The analysis based on the integral transform approach is conducted on the permeable crack condition. Field intensity factors and energy release rate are obtained in terms of a Fredholm integral equation of the second kind. It is shown for this geometry that the crack propagation speed has influence on the dynamic energy release rate. The initial crack branching angle for a PZT-5H piezoceramic structure is predicted by the maximum energy release rate criterion. Received 23 January 2001; accepted for publication 18 October 2001     

一维六方准晶压电材料中唇形裂纹反平面问题的解析解

本文在准晶压电材料基本方程的基础上,根据点群的对称性和一维六方准晶的线性压电效应,导出了一维六方准晶压电材料反平面问题的控制方程.利用复变函数的方法,通过引入适当的保角映射,研究了准晶压电材料中唇形裂纹的反平面问题,并利用Cauchy积分理论,得到在电不可通边界条件下的裂纹尖端场强度因子与机械应变能释放率的解析表达式.     

电可通纳米尺度孔边均布多裂纹的电弹断裂分析

解析研究了面内电载荷和反平面机械载荷作用下压电体中纳米尺度圆孔边均布电可通多裂纹问题的断裂性能。基于Gurtin-Murdoch表面弹性理论,利用保角映射方法和复变弹性理论给出了裂纹尖端电弹场分布、电弹场强度因子及能量释放率的解析结果。阐述了无量纲电弹场强度因子、无量纲能量释放率的尺寸依赖效应,讨论了裂纹数量和缺陷几何参数对无量纲场强度因子和无量纲能量释放率的影响。结果表明：无量纲电弹场强度因子和无量纲能量释放率具有显著的尺寸依赖效应;考虑表面效应,孔径和裂纹长度相当时,电弹场强度因子达到最大;裂纹/孔径比对电弹场强度因子随裂纹数量变化的制约会随着裂纹数量的增加而逐渐消失;过大或过小的裂纹孔径比会削弱裂纹长度对能量释放率的影响。     

电可通纳米尺度孔边均布多裂纹的电弹断裂分析

解析研究了面内电载荷和反平面机械载荷作用下压电体中纳米尺度圆孔边均布电可通多裂纹问题的断裂性能。基于Gurtin-Murdoch表面弹性理论，利用保角映射方法和复变弹性理论给出了裂纹尖端电弹场分布、电弹场强度因子及能量释放率的解析结果。阐述了无量纲电弹场强度因子、无量纲能量释放率的尺寸依赖效应，讨论了裂纹数量和缺陷几何参数对无量纲场强度因子和无量纲能量释放率的影响。结果表明：无量纲电弹场强度因子和无量纲能量释放率具有显著的尺寸依赖效应；考虑表面效应，孔径和裂纹长度相当时，电弹场强度因子达到最大；裂纹/孔径比对电弹场强度因子随裂纹数量变化的制约会随着裂纹数量的增加而逐渐消失；过大或过小的裂纹孔径比会削弱裂纹长度对能量释放率的影响。     

Thermal/mechanical interaction of subcritical crack growth in tensile specimen

The mutually interacting thermal/mechanical effects are accounted for by retaining the rate of change of volume with surface dV/dA, in the surface/volume energy density theory. An exchange between surface and volume energy would thus prevail in accordance with the rates at which the loads are transmitted throughout the system. Obtained are results for a center-cracked specimen subjected to monotonically rising tensile load at the rate of . Eight load steps are taken with an even increment increase of 69 MPa starting from 276 MPa. The temperature is found to oscillate about the ambient condition as the crack grew incrementally in a stable fashion. What differed considerably from the plasticity theory are the local stress and strain distribution and the crack growth characteristics. This is particularly pronounced in regions close to the crack tip where the local strain rates and strain rate history change from element to element, an affect that is not accounted for in plasticity.     

Crack energy density of a piezoelectric material under general electromechanical loading

Crack energy density is considered and used as a possible fracture parameter in piezoelectricity under arbitrary electromechanical remote loads. The closed-form solution of a crack in a piezoelectric infinite plate subjected to general static electromechanical loading is obtained through a method alternative to the more common Stroh’s formalism. This analytical method, which is based on the spectral theorem of linear algebra, involves a transformation of similarity induced by the fundamental matrix in order to express the equations governing the problem in terms of complex potentials. The application of the mechanical boundary condition of stress-free crack and of one of the three considered electric boundary conditions (impermeable, permeable or semipermeable) leads then to the formulation of a Hilbert problem whose solution yields the stress and displacement fields. The crack energy density factors for mixed mode are then calculated under different mechanical and electrical loadings, as well as under different electric boundary conditions. The non-singular terms of the stress expressions are retained as well. The definition of the minimum energy density fracture criterion, as proposed by Sih, is given, and the influence of load biaxiality and positive or negative applied electric field on the criterion results is analyzed. The prediction of the incipient branching angle as from the energy density approach is also compared to that arising from the maximum circumferential stress theory for a mixed mode loading condition. Numerical results and graphs are presented and discussed for a PZT-4 piezoelectric ceramic.     

Energy density theory formulation and interpretation of cracking behavior for piezoelectric ceramics

Any attempt made to separate energy into electrical and mechanical parts may lead to inconsistencies as they do not necessarily decouple. This is illustrated by application of the energy density function in the linear theory of piezoelasticity. By assuming that a critical energy density function prevails at the onset of crack initiation, it is possible to establish the relative size of an inner and outer damage zone around the crack tip; they correspond to the ligaments at failure caused by pure electric field and pure mechanical load. On physical grounds, the relative size of these zones must depend on the relative magnitude of the mechanical and electrical load. Hence, they can vary in size depending on the electromechanical material and damage resistance properties. Numerical results are obtained for the PZT-4, PZT-5H, and P-7 piezoelectric ceramics. These two ligaments for the two damage zones may coincide for appropriate values of the applied electrical field and mechanical load.Explicit expression of the energy density factor S is derived showing the mixed mode electromechanical coupling effects. The factor S can increase or decrease depending on the direction of the applied electric field with reference to the poling direction. This is in contrast to the result obtained from the energy release rate quantity, which remains unchanged for electric field in the direction of poling or against it.     

Electroelastic interaction between a piezoelectric screw dislocation and a confocal elliptic blunt crack with elliptical inhomogeneity

The electroelastic interaction between a piezoelectric screw dislocation and an elliptical inhomogeneity containing a confocal blunt crack under infinite longitudinal shear and in-plane electric field is investigated. Using the sectionally holomorphic function theory, Cauchy singular integral, singularity analysis of complex functions and theory of Rieman boundary problem, the explicit series solution of stress field is obtained when the screw dislocation is located in inhomogeneity. The intervention law of the interaction between blunt crack and screw dislocation in inhomogeneity is discussed. The analytical expressions of generalized stress and strain field of inhomogeneity are calculated, while the image force, field intensity factors of blunt crack are also presented. Moreover, a new matrix expression of the energy release rate and generalized strain energy density (SED) are deduced. With the size variation of blunt crack, the results can be reduced to the case of the interaction between a piezoelectric screw dislocation and a line crack in inhomogeneity. Numerical analysis are then conducted to reveal the effects of the dislocation location, the size of inhomogeneity and blunt crack and the applied load on the image force, energy release rate and strain energy density. The influence of dislocation on energy release rate and strain energy density is also revealed.     

矩形压电体中反平面裂纹的电弹性场

基于线性压电理论,本文获得了含有中心反平面裂纹的矩形压电体中的奇异应力和电场。利用Fourier积分变换和Fourier正弦级数将电绝缘型裂纹问题化为对偶积分方程,并进一步归结为易于求解的第二类Fred-holm积分方程。获得了裂纹尖端应力、应变、电位移和电场的解析解,求得了裂纹尖端场的强度因子及能量释放率。分析了压电矩形体的几何尺寸对它们的影响。结果表明,对于电绝缘型裂纹,裂纹尖端附近的各个场变量都具有-1/2阶的奇异性,能量释放率与电荷载的方向及大小有关,并且有可能为负值。