Nonlinear dynamics and vibration reduction of a dry friction oscillator with SMA restraints

The dynamic behaviors of a dry friction oscillator with shape memory alloy (SMA) are investigated. Motion equations of the system are formulated by the restoring force of the oscillator in terms of a polynomial constitutive model dependent mainly on the temperature. The vibration response of the system and the influence of the temperature are investigated. It is shown that chaotic motions can be observed and dramatically changed by temperature characteristics. Moreover, some sliding bifurcations are also discovered and influenced by the temperature. Compared with conventional dry friction elastic oscillators, the dry friction SMA oscillator presents much richer dynamic behavior caused by pseudo-elasticity, and vibration reduction can be achieved through the shape memory property of SMA restraints.     

Thermal vibration and apparent thermal contraction of single-walled carbon nanotubes

It is of fundamental value to understand the thermo-mechanical properties of carbon nanotubes. In this paper, by using molecular dynamics simulation, a systematic numerical investigation is carried out to explore the natural thermal vibration behaviors of single-walled carbon nanotubes and their quantitative contributions to the apparent thermal contraction behaviors. It is found that the thermo-mechanical behavior of single-walled carbon nanotubes is exhibited through the competition between quasi-static thermal expansion and dynamic thermal vibration, while the vibration effect is more prominent and induces apparent contraction in both radial and axial directions. With increasing temperature, the anharmonic interatomic potential helps to increase the bond length, which leads to thermally induced expansion. On the other hand, the higher structural entropy and vibrational entropy of the system cause the carbon nanotube to vibrate, and the apparent length of nanotube decreases due to various vibration modes. Parallel analytical and finite element analyses are used to validate the vibration frequencies and provide helpful insights. The unified multi-scale study has successfully decoupled and systematically analyzed both thermal expansion and contraction behaviors of single-walled carbon nanotube from 100 to 800 K, and obtained detailed information on various vibration modes as well as their quantitative contributions to the coefficient of thermal expansion in axial and radial directions. The results of this paper may provide useful information on the thermo-mechanical integrity of single-walled carbon nanotubes, and become important in practical applications involving finite temperature.     

Nonlinear vibration of a rotating cantilever beam in a surrounding magnetic field

The nonlinear vibrations of a rotating cantilever beam made of magnetoelastic materials surrounded by a uniform magnetic field are investigated. The kinetic energy, potential energy and work done by the electromagnetic force are obtained. A nonlinear dynamic model, based on the Hamilton principle, which includes the stretching vibration and bending vibration is presented. The Galerkin method is adopted to discretize the dynamic equations. The proposed method is validated by comparison with the literature. The nonlinear behaviors of the responses are studied. Then simulations for different kinds of magnetic field are conducted. The effects of magnetic field parameters, including the amplitude, plane angle, spatial angle and time-varying frequency, on the dynamic behaviors of the stretching motion and bending motion are investigated in detail. The results illustrate that the interaction effects between the rotating cantilever beam and the magnetic field will increase the vibration amplitude and fluctuation of the beam. In particular, we found that: collinear magnetic fields with equal amplitude lead to the same dynamic responses; the amplitude of magnetic field intensity increases the dynamic responses remarkably; the response amplitude changes nonlinearly with the plane angle and spatial angle of the magnetic field; and the increase of time-varying frequency enhances dynamic responses of the rotating cantilever beam.     

High-speed frictional slip at metal-on-metal interfaces

In this study plate-impact pressure-shear friction experiments are employed to investigate dynamic slip resistance and time-resolved growth of molten metal films during dry metal-on-metal slip under extreme interfacial conditions. By employing a tribo-pair comprising of a hard tool-steel against a relatively low melt-point metal (7075-T6 Al alloy), interfacial normal stress of up to 5 GPa and slip speeds of approximately 250 m/s have been achieved. These extreme interfacial conditions are conducive to the development of molten metal film at the tribo-pair interface. A Lagrangian finite element code is developed to understand the evolution of the thermo-mechanical fields and their relationship to the observed slip response. The code accounts for dynamic effects, heat conduction, contact with friction, and full thermo-mechanical coupling. At temperatures below the melting point of the tribo-pair materials are described as isotropic, thermally softening, elastic–viscoplastic solids. For material elements with temperatures in excess of the melt temperature a purely Newtonian fluid constitutive model is employed.     

单自由度超弹性SMA减振结构随机振动控制理论研究

利用形状记忆合金（Shape Memory Alloy,简称SMA）丝的超弹性,提出了一种具有复位功能的阻尼器。在SMA丝的Graesser本构模型基础上,建立了阻尼器恢复力的滑移双线性模型;假定滞回面积相等,提出了恢复力的滑移刚塑性模型以近似简化滑移双线性模型。采用等价线性化法建立了单自由度超弹性SMA减振结构在高斯白噪声激励下的平稳随机振动分析公式。通过一算例,考虑不同激励谱密度和结构阻尼比：比较了等价线性法和蒙特卡罗（Monte Carlo）模拟法计算的结构振动响应（位移标准差和速度标准差）,证明了SMA减振结构随机振动控制理论的有效性;比较了等价线性减振结构和无控结构的动力特性（刚度和阻尼比）和振动响应,说明了SMA阻尼器能提高结构的刚度和阻尼比,因而可有效抑制结构的振动。     

Shape memory elastic foundation and supports for passive vibration control of composite plates

The paper presents an approach to passive vibration control of shear deformable and thin plates. The first of two methods of vibration control employs prestressed shape memory alloy (SMA) wires embedded in sleeves attached to the surface of the plate. The spacing between the wires can be arbitrary and variable enabling the development of a SMA support system for maximum control with minimum additional weight. The other method considered in the paper utilizes SMA wires supporting the plate at strategically selected points. The mechanism of passive control includes two components: (1) SMA wires prestressed as a result of constrained phase transformation act as an elastic foundation with a variable stiffness and (2) energy dissipation occurs as a result of hysteresis in superelastic wires vibrating together with the structure. As follows from examples, it is possible to achieve a significant reduction of the vibration amplitude over a broad spectrum of driving frequencies using any of two methods considered in the paper.     

Suppression of super-harmonic resonance response using a linear vibration absorber

Super-harmonic resonances may appear in the forced response of a weakly nonlinear oscillator having cubic nonlinearity, when the forcing frequency is approximately equal to one-third of the linearized natural frequency. Under super-harmonic resonance conditions, the frequency-response curve of the amplitude of the free-oscillation terms may exhibit saddle-node bifurcations, jump and hysteresis phenomena. A linear vibration absorber is used to suppress the super-harmonic resonance response of a cubically nonlinear oscillator with external excitation. The absorber can be considered as a small mass-spring-damper oscillator and thus does not adversely affect the dynamic performance of the nonlinear primary oscillator. It is shown that such a vibration absorber is effective in suppressing the super-harmonic resonance response and eliminating saddle-node bifurcations and jump phenomena of the nonlinear oscillator. Numerical examples are given to illustrate the effectiveness of the absorber in attenuating the super-harmonic resonance response.     

考虑人体耦合作用的结构竖向隔振研究

结构在环境振动或地震作用下的竖向振动不容忽略,有必要采取竖向隔振装置进行减振控制。考虑人体与结构耦合作用后不仅使隔振动力模型更加真实,还可以直接获得人体的动力响应。采用碟形弹簧支座对结构进行基础竖向隔振,并根据国际标准ISO5982规定的不同姿势下的人体动力模型,建立了考虑具有非经典阻尼的人与隔振结构耦合运动方程,利用复模态分析实现了方程的解耦,通过算例分析了竖向隔振以及人体作用对结构响应的影响。结果表明:对于一般的质量和刚度分布均匀的结构,人体对结构具有微弱的减振作用。碟形弹簧支座可以显著地降低结构的竖向振动并改善居住舒适度。     

基于单个压电振子的湍流边界层主动控制

利用安装在壁面上的单个压电振子周期振荡,采用开环主动控制方案,实现了对平板湍流边界层相干结构猝发的主动控制和壁湍流减阻.根据不同的输入电压幅值和频率,完成了10种工况的实验.在压电振子下游2mm处,用热线风速仪和迷你热线单丝探针,精细测量湍流边界层不同法向位置瞬时流向速度信号的时间序列,分析了在Re_?=2183压电振子振动对湍流边界层平均速度剖面、减阻率和相干结构猝发过程的影响.实验结果表明,施加控制的工况使平均速度剖面对数律层上移,产生减阻效果;压电振子振幅越大,减阻率越高,减阻效果越明显;通过对施加控制前后流向瞬时速度的多尺度湍涡结构脉动动能的尺度分析,当压电振子振动频率与壁湍流能量最大尺度的猝发频率相近时,减阻率达到最大,为25%,说明控制壁湍流能量最大尺度相干结构的猝发是实现壁湍流减阻的关键;通过对比相干结构猝发的流向速度分量条件相位平均波形,发现施加控制的工况中相干结构猝发流向速度分量的波形幅值明显降低,且流向速度在扫掠后期高速阶段迅速衰减,缩短了高速流体的下扫过程,说明压电振子的振动能抑制相干结构的高速流体下扫过程,减弱高速流体与壁面的强烈剪切过程,并使近壁区域相干结构的振幅显著减弱,迁移速度加快,从而减小壁面摩擦阻力.      

Thermo-mechanical response of Al 6061 with and without equal channel angular pressing (ECAP)

The thermo-mechanical responses of Al 6061 before and after equal channel angular pressing (ECAP) at different strain rates and temperatures were measured. Al 6061 was solution heat treated before ECAP pressing at room temperature and subjected to up to three passes. After pressing, the billets were aged at 100 °C for 2 days. An as-received Al 6061-T651 was studied similarly to investigate the differences between processed and non-processed specimens. The responses of ECAP material were determined at −30, 22, 125 and 250 °C, and at strain rates from 10⁻⁵ to 2530 s⁻¹; the 6061-T651 specimens were subjected to uniaxial compressive loading at −31, 22, 85, 150, 230 and 315 °C, and strain rates ranging from 10⁻⁵ to 2200 s⁻¹. It was found that, the ECAP process increases the strength versus the T651 condition. Additionally, the Al 6061 ECAP is not sensitive to strain rate at room and lower temperatures, but the sensitivity increases as the number of passes and/or temperature are increased and this is the same for the non-processed material. Increasing the number of passes increases the flow stress at room and lower temperatures, has almost no effect at 125 °C and decreases at 250 °C. For both materials, the dynamic flow stress is higher than the stress at quasi-static strain rates even when the quasi-static strain rate regime is insensitive to strain rate. The Al 6061 has strong texture after one pass but steadily increases as the number of passes are increased. This is the first study that reports on the thermo-mechanical responses of ECAP and non-ECAP Al 6061 at such a wide range of strain rates, including dynamic, and temperatures.     

Nonlinear finite element analysis of shape memory alloy (SMA) wire reinforced hybrid laminate composite shells

This study introduces a non-linear finite element analysis approach to the procedure of modeling hybrid laminate composite shells with embedded shape memory alloy (SMA) wire subjected to coupled structural and thermal loading. Numerical analyses of SMA wire reinforced composite laminates were carried out by synergizing the non-linear laminate shell element with Brison's model of the SMA constitutive law. To verify the proposed procedure, the present illustrative applications involve rectangular laminated panels clamped along one side. Analysis results were compared with corresponding experimental results from a prior study. Several test cases that depend on the volume fraction of SMA, temperature, and ply angles are presented to illustrate the highly entangled thermo-mechanical behavior of shape memory alloy hybrid composites (SMAHCs). The results of the numerical analysis show the ability of the suggested procedure to compute the thermo-mechanical behavior of a SMAHC in accordance with the SMA's internal phase transformations induced by stress and temperature variation and demonstrate very good agreement with experimental results.     

Low Velocity Response Characteristics of Composite Plate with Embedded Shape Memory Alloy

I. INTRODUCTION Composite materials have been used extensively in aerospace and other industries owing to the factthat they have high speci?c modulus, high speci?c strength, and the capability to be designed andfabricated with greater ?exibility, and ha…     

两尺度Duffing系统的动力吸振器减振研究

两尺度耦合的Duffing系统存在复杂振动, 此类振动具有振幅大、频率高的特点, 对系统的危害不容忽视. 研究了线性动力吸振器对低频参数激励下Duffing系统的振动控制问题, 通过对比耦合动力吸振器前后系统的时间历程图、相图, 发现加入动力吸振器后系统会由单一振动模式转变为混合振动模式(簇发振动), 振动幅值明显减小, 尤其对高频振动部分抑制明显. 利用快慢分析法, 当参数激励为慢变过程时得到相应的自治系统, 并发现自治系统稳定性与分岔行为对非自治系统振动响应具有明显调节作用. 研究结果表明, 虽然耦合动力吸振器前后自治系统均发生叉形分岔, 但是加入吸振器后自治系统稳定性发生变化, 稳定中心变为渐进稳定的焦点, 稳定平衡线对非自治系统轨线的吸引力增强, 使得响应振动幅值减小; 另外轨线在不同吸引子之间的跳跃次数减少, 也是导致响应振动幅值减小的另一个原因. 通过对参数激励的相关参数减振效果分析, 发现加入的动力吸振器在较大的振动幅值和频率范围内都能起到抑制系统振动的作用. 为两尺度系统耦合线性动力吸振器减振研究提供了理论依据.      

Vibration reduction in a flexible-link mechanism through synthesis of an optimal controller

In this paper, reduction of vibration of a flexible planar mechanism is achieved through synthesis of an optimal controller. A finite element model, based on the equivalent rigid-link system theory, is used to accurately describe the dynamic behavior of the system. The model, which accounts for geometric and inertial nonlinearities of the mechanism, has been fully validated through experimental tests. In order to be able to employ the classical optimal control theory, a suitable linear model has been derived from the original one by means of a suitable linearization procedure. Vibration reduction can then be obtained by first defining an adequate performance index, which accounts for vibration amplitude, then by solving Riccati’s equation in order to find the controller that minimizes the performance index, i.e. the optimal controller. The results of several tests that have been carried out are also reported, to show the effectiveness of the synthesized control system.     

STUDY ON THE RESPONSE TO LOW-VELOCITY IMPACT OF A COMPOSITE PLATE IMPROVED BY SHAPE MEMORY ALLOY

Improvement from the pseudo-elastic effect of shape memory alloy (SMA) on the low-velocity impact (LVI) resistance of a composite plate is investigated by the finite element method (FEM).The stiffness matrix of the dynamic finite element equation is established step by step and the martensite fraction is obtained at each time step.The direct Newmark integration method is employed in solving the dynamic finite element equation,while the impact contact force is determined using the modified Hertz's law.It is found that SMA can effectively improve the performance of a composite structure subjected to low-velocity impact.Numerical results show that the deflection of a SMA-hybrid composite plate has been reduced approximately by thirty percent when the volume fraction of the embedded SMA reaches 0.3.     

Study on interface failure of shape memory alloy （SMA） reinforced smart structure with damages

Shape memory alloy (SMA) reinforced smart structure can be used to make structural shape and strength self-adapted and structural damage self-restrained. Although SMA smart structures without damages were extensively studied, researches on SMA smart structures with damages have rarely been reported thus far. In this paper, thermo-mechanical behaviors of SMA fiber reinforced smart structures with damages are analyzed through a shear lag model and the variational principle. Mathematical expressions of the meso-displacement field and the stress-strain field of a typical element with damages are obtained, and a failure criterion for interface failure between SMA fibers and matrix is established, which is applied to an example. Results presented herein may provide a theoretical foundation for further studies on integrity of SMA smart structures.The project supported by the National Natural Science Foundation of China (10072026, 50135030) and Aeronautical Science Foundation of China (01G52041)The English text was polished by Keren Wang.     

Vibration energy harvesting from impulsive excitations via a bistable nonlinear attachment

A vibration-based bistable electromagnetic energy harvester coupled to a directly excited primary system is examined numerically. The primary goal of the study is to investigate the potential benefit of the bistable element for harvesting broadband and low-amplitude vibration energy. The considered system consists of a grounded, weakly damped, linear oscillator (LO) coupled to a light-weight, weakly damped oscillator by means of an element which provides both cubic nonlinear and negative linear stiffness components and electromechanical coupling elements. Single and repeated impulses with varying amplitude applied to the LO are the vibration energy sources considered. A thorough sensitivity analysis of the system's key parameters provides design insights for a bistable nonlinear energy harvesting (BNEH) device able to achieve robust harvesting efficiency. This is achieved through the exploitation of three BNEH main dynamical regimes; namely, periodic cross-well, aperiodic (chaotic) cross-well, and in-well oscillations.     

The effect of blade vibration on the nonlinear characteristics of rotor–bearing system supported by nonlinear suspension

In this paper, the complicated nonlinear dynamics of the harmonically forced quasi-zero-stiffness SD (smooth and discontinuous) oscillator is investigated via direct numerical simulations. This oscillator considered that the gravity is composed of a lumped mass connected with a vertical spring of positive stiffness and a pair of horizontally compressed springs providing negative stiffness, which can achieve the quasi-zero stiffness widely used in vibration isolation. The local and global bifurcation analyses are implemented to reveal the complex dynamic phenomena of this system. The double-parameter bifurcation diagrams are constructed to demonstrate the overall topological structures for the distribution of various responses in parameter spaces. Using the Floquet theory and parameter continuation method, the local bifurcation patterns of periodic solutions are obtained. Moreover, the global bifurcation mechanisms for the crises of chaos and metamorphoses of basin boundaries are examined by analysing the attractors and attraction basins, exploring the evolutions of invariant manifolds and constructing the basin cells. Meanwhile, additional nonlinear dynamic phenomena and characteristics closely related to the bifurcations are discussed including the resonant tongues, jump phenomena, amplitude–frequency responses, chaotic seas, transient chaos, chaotic saddles, and also their generation mechanisms are presented.     

负刚度时滞反馈控制动力吸振器的等峰优化

相比于传统动力吸振器, 负刚度动力吸振器同时具有更好的减振能力和更宽的有效减振频带宽度, 为了进一步降低共振峰幅值, 在负刚度吸振器系统耦合时滞反馈控制. 对负刚度时滞反馈控制动力吸振器系统进行等峰优化设计, 优化设计的准则是:第一和第二共振峰的峰值相等; 同时兼顾两个目标, 一个目标是在优化时的最大共振峰幅值小于被动负刚度吸振器系统的反共振峰幅值, 另一目标是在优化时共振峰幅值与反共振峰幅值差小于被动吸振器系统. 接着, 通过设计和调节负刚度系数、吸振器阻尼系数和时滞反馈控制系数对控制系统进行等峰优化设计. 最后, 在降低幅值的同时, 分析结构参数对有效减振频带宽度的影响. 经过等峰优化之后, 选择本文的一组结构参数与两个典型的模型进行对比. 为了定量比较不同模型的降幅效果, 定义了减幅百分比, 研究发现在有效减振频带区间内减幅百分比超过40%以上. 结果表明, 通过等峰优化准则对结构参数进行优化设计和调节增益系数和时滞量, 共振峰幅值的减幅百分比也近似达到40%, 也可以调节增益系数和时滞量, 使得幅频响应曲线具有较宽的有效减振频带和较低的共振峰幅值与反共振峰幅值的差值.      

基于非线性吸能机理的涡激振动减振理论与实验研究

流致振动现象广泛存在于机械、航空、土木和石油等重要工程领域, 为防止工程结构因流致振动行为而造成疲劳破坏, 有必要对稳定性、动力学响应及其振动控制做深入研究. 本文提出了一种由弹簧和质量块构成的非线性吸能器(nonlinear targeted energy transfer, NTET), 研究了该非线性吸能器对弹性支承圆柱体涡激振动的被动控制影响机制. 基于能量法推导了圆柱体涡激振动非线性被动控制的耦合动力学方程, 通过设计非线性弹簧?质量块构型的NTET, 进一步开展了涡激振动控制的实验研究, 并与理论预测结果进行了较好的对比, 获得提升涡激振动控制效果的最佳参数值. 研究发现, NTET的质量、弹簧刚度以及弹簧预应力等参数会对涡激振动控制效果产生显著的影响. 本文研究结果表明, 该耦合系统中圆柱体和NTET均表现出周期性的稳态振动响应, NTET质量的改变会显著影响系统的耦合频率. 在无预应力状态下, NTET质量越大、刚度越小时, 有更好的减振效果. 当弹簧预应力逐渐增大时, NTET的非线性刚度逐渐变弱, 会降低涡激振动控制性能. 参数分析表明: 随着涡激振动控制性能的提升, 圆柱体的振幅逐渐较小, NTET的振幅逐渐增大, 能量传递效率逐渐提高. 研究结果可为工程中涡激振动控制策略的高效设计提供有用的理论支撑和实验数据.