Delamination growth of laminated composite cylindrical shells

The local buckling may occur in delaminated cylindrical shells under axial compression. This often causes delamination growth and structure failure. Based on the variational principle of moving boundary, in this paper, the postbuckling governing equations for the laminated cylindrical shells are derived, and the corresponding boundary and matching conditions are given. At the same time, according to the Griffith criterion, the formulas of energy release rate along the delamination front are obtained and the delamination growth is studied. In the numerical calculation, the delamination growth of axisymmetrical laminated cylindrical shells is analyzed, and the effects of delamination sizes and depths, the boundary conditions, the material properties and the laminate stacking sequences on delamination growth are discussed.     

Delamination growth for composite laminated cylindrical shells under external pressure

The delamination growth may occur in delaminated cylindrical shells under external pressure.This will lead to failure of structure.By using the variational principle of moving boundary and considering the contact effect between delamination regions,in this work,the delamination growth was investigated for cylindrical shells under the action of external pressure.At the same time,according to the Griffith criterion,the formulas of energy release rate along the delamination front were obtained.In the numerical calculation,the delamination growth of axisymmetrical laminated cylindrical shells was analyzed,and the effects of delamination sizes and depths,the geometrical parameters, the material properties,and the laminate stacking sequences on delamination growth were discussed.     

Analysis of energy release rate for composite delaminated cylindrical shells subjected to axial compression

In this paper, the postbuckling governing equations and the analytical expression of the energy release rates associated with delamination growth in a compression-loaded cylindrical shell are derived by using the variational principle of moving boundary and the Griffith fracture criterion. The finite difference method is used to generate the postbuckling solutions of the delaminated cylindrical shells, and with these solutions, the values of the energy release rates are determined. In simulational examples, the effects of a wide range of parameters, such as delamination sizes and depths, boundary conditions, geometrical parameters, material properties and laminate stacking sequences on the energy release rates of axisymmetrical laminated cylindrical shells are intensively discussed.The English text was polished by Yunming Chen.     

具脱层轴对称层合圆柱壳的振动模态分析

对具环向贯穿脱层的轴对称层合圆柱壳进行振动模态分析.首先,采用Heaviside阶梯函数,构造了一种适合于脱层壳的位移模式.通过对脱层壳的能量分析,应用瑞利--里兹法后,得到用时间函数表示的系统振动控制方程,然后对其求解,得到脱层壳模态分析的特征方程式.算例中,讨论了不同的脱层位置、脱层大小和脱层深度对脱层壳振动模态的影响.     

具脱层的正交铺设圆柱壳的初始后屈曲分析

基于非线性弹性理论,建立了含脱层正交铺设圆柱壳的后屈曲控制方程,应用Koiter初始后屈曲理论和小参数摄动法,导出了系统的一阶和二阶摄动控制方程,以及相应的边界条件、位移连续条件和力平衡条件,然后逐阶求解．算例中,讨论了不同脱层深度和长度对脱层复合材料圆柱壳屈曲和初始后屈曲特性的影响,并与已有文献进行了比较．     

基于混合变量的脱层壳屈曲分析

提出一种分析脱层圆柱壳稳定性问题的混合变量条形传递函数方法。首先基于一阶剪切理论，通过定义广义位移变量和对应的广义力变量，建立壳的改进的混合变量能量泛函；然后引入条形单元，对混合变量在环向进行离散，从而导出超级壳单元的混合变量能量泛函，由变分原理得到控制方程，采用传递函数方法得到其形式解；最后，将含环向贯穿脱层的复合材料层合壳作为超级壳单元的组合体，得到脱层壳的屈曲方程。给出了脱层大小和深度以及脱层壳边界条件对屈曲载荷的影响。     

复合材料层合梁在横向线载荷下的脱层扩展

基于可动边界变分原理对层合梁脱层扩展进行了分析;考虑了脱层间的接触效应,建立了层合梁在横向线载荷作用下的非线性控制微分方程及相应的定解条件;应用Griffith准则导出了脱层前缘各点处的能量释放率表达式;通过算例讨论了脱层长度、脱层深度、几何尺寸、材料性质等因素对脱层扩展的影响.研究表明:脱层越长、越深、横向载荷越大,脱层越容易扩展;梁的长高比L/h及材料的E_(11)/E_(22)越大,脱层越不易发生扩展.     

含分层损伤复合材料层合板分层扩展研究

采用基于Ｍｉｎｄｌｉｎ－阶剪切理论的四节点板单元,分析了含椭圆分层合板分层扩展行为。利用虚裂纹闭合技术计算分层前缘处的总能量释放率,并采用总能量释放率准则作为扩展准则,结合自适应网格移动技术,并考虑了分层前缘闭合接角效应,对 合材料层合板的分层扩展行为进行了模拟分析。结果表明,初始分层形状对其扩展有方式有限大影响。     

Energy release rate analysis of delamination in laminates

Delamination growth caused by local buckling of delaminated laminate under compression may lead the structure to failure. In this paper, a two-dimensional model of delaminated laminates was studied using a combination of post-buckling theory and fracture mechanics. The delaminated laminate under compression is first analysed by the first-order deformable plate thoery. Then, the energy release rateG at every point along the delamination front is derived by means of a variation problem with a moving boundary. Finally, the near-surface elliptical delamination is also discussed. There is a large variation of energy release rateG along the delamination front, the direction in which delamination growth may occur depends upon the delamination aspect ratio, the state of applied load and the orientation of plies.Supported by the Chinese Science Foundation of Aeronautics     

Buckling analysis of two layer delaminated beams with bridging

Stitching has been used as through-thickness reinforcement to reduce the effects of delamination. In stitching, the delamination will be held by stitches in the form of crack/interface bridging. In the present work, the reinforcement of stitching threads is assumed to provide continuous linear restoring tractions opposing the delamination opening. A generalized mathematical model is developed to study the buckling analysis of two layer delaminated beams with bridging by using Rayleigh–Ritz energy method. The delaminated beam is analyzed as four interconnected beams using the delamination as their boundary. Lagrange multipliers are used to enforce the boundary and continuity conditions between the junctions of the interconnected beams. The developed mathematical model is solved as an eigenvalue problem in which the lowest eigenvalue gives the buckling load. Effective-bridging modulus, a new nondimensionalized parameter, is introduced to study the influence of bridging on the delamination buckling. It is shown that bridging strongly influences the buckling load of the delaminated beams and a monotonic relation is observed between the buckling load and the effective-bridging modulus. Parametric studies in terms of delamination sizes and locations along spanwise and thicknesswise positions on the buckling load have been carried out. The bridging is found to be effective for shallow delaminations of moderate length, and for deep and long delaminations. Spanwise positions of delamination strongly influence the buckling loads. In addition, an analytical model for obtaining upper bounds of the buckling load is developed by using Euler–Bernoulli beam theory. Effective-slenderness ratio, a new nondimensionalized parameter is defined and it is found to be controlling the buckling mode configurations, i.e., local, global and mixed modes.     

受弯脱层层板的局部失稳临界载荷的有限元分析

含脱层的复合材料层板承受弯曲载荷作用会产生跳跃失稳，还常常引起脱层扩展，从而导致结构失效。本文用基于一阶剪切层板理论的几何非线性有限单元法分析了受弯曲曲载荷作用下含脱层板的人稳的临界载荷。本文指出分叉失稳产生了跳跃失稳，而该跳跃失稳与浅圆拱或薄圆柱壳受向心压力作用下的跳跌 同，在整体平衡路径上没有一个极限点。本文对临界载计算结果比使用能量准则的结果要小，文中给出了原因。     

The effects of bridging in a 3D composite on buckling, postbuckling and growth of delamination

Summary Buckling and postbuckling solutions to circular delamination constrained by transversal restoring forces, which occur extensively in stitched or woven composites with three-dimensional (3D) reinforcement, are obtained by using von Karman's geometrically nonlinear thin plate theory by means of Taylor's series expansion. The through-thickness tows are assumed to provide continuous and linear restoring tractions, opposing the deflection of the annular delaminated region adjacent to a penny-shaped crack. When the end of the delaminated layer is clamped, and the deflection is permitted in the positive direction of the z-axis only, there exists a characteristic delamination radius a _* for initial buckling. In the case that the initial delamination radius a ₀ exceeds a _*, it will consist of waves whose sizes decrease gradually, as they are apart from the delamination center with larger distances, and will usually not span the whole crack region. Therefore, buckling profiles can be divided into two types: (1) lacking contact phenomena between the delaminated layer and the base plate; (2) having contact surfaces inside the delamination region. In this paper, growth laws of buckling, postbuckling and growth of delamination at lacking contact surface are discussed. The corresponding stability of the delamination growth under fixed boundary load is studied, and the dependence of stable scope upon the fracture toughness of the composite and the elastic constant of bridging fiber is summarized. It follows from the analysis that bridging can increase the load-bearing capacity of composite structure, improve its mechanical performances and restrain the growth of delamination. Received 23 November 1998; accepted for publication on 13 January 1999     

考虑面内破坏过程的含分层损伤复合材料加筋层合板的动力响应

基于复合材料层合板一阶剪切理论，推导了复合材料层合板单元的刚度阵和质量阵列式；同时采用了Adams应交能法与Rayleigh阻尼模型相结合的方法，构造了相应的阻尼阵列式；为了防止在低阶模态中分层处出现的上、下子板不合理的嵌入现象，建立了含分层损伤复合材料加筋层合板动力分析的分层分析模型和虚拟界面联接模型。在上述模型和理论基础上，采用了Tsai提出的刚度退化准则和动力响应分析的精细积分法，对含分层损伤复合材料加筋层合板结构进行了动力响应和破坏分析。通过算例，分别讨论了外载频率、分层位置，以及破坏过程的刚度退化对含损伤复合材料加筋层合板动力响应特征的影响，得到了一些具有理论和工程价值的结论。     

圆柱壳稳定性问题的研究进展

圆柱壳是工程实际中广泛应用的结构,其主要破坏形式是屈曲失稳．作为力学领域的经典问题,圆柱壳稳定性问题的研究非常之多．其中,受均匀轴向压力的圆柱壳由于临界屈曲载荷的理论预测值与早期试验结果之间的巨大差异,更是推动了壳体稳定性理论的不断发展．本文简要回顾了壳体稳定性理论的发展和分类,并对轴压圆柱壳体试验结果分散且远低于理论预测值的原因及含缺陷圆柱壳体的稳定性研究方法进行了总结,然后综述了地下空间顶管、储油罐、加筋圆柱壳及脱层圆柱壳等实际工程中广泛应用的圆柱壳结构稳定性研究的现状和趋势,最后展望了将来对工程应用中圆柱壳结构的稳定性研究的难点和方向．     

SEMI-ANALYTICAL SOLUTION FOR TWO KINDS OF DELAMINATION MODELS OF LAMINATED CYLINDRICAL SHELLS

为了研究层合壳脱层,本文首先建立了柱坐标系下Hamilton 正则方程的8 节点等参元列式;然后分别采用了"先分后合" 模型和"弱粘接" 模型对开口壳的脱层损伤进行了模拟;通过利用层间的力学关系建立了整个壳的求解方程;最后分别从粘接完好和脱层两类情况对开口壳进行研究,并计算脱层前缘裂纹扩展的能量释放率. 数值实例的分析结果表明环向脱层受外载荷影响大于轴向脱层外载荷影响,脱层深度对两类脱层模型影响较大.     

层板脱层的能量释放率分析

含脱层的层板在承受压缩载荷作用时,很容易发生局部屈曲,导致脱层扩展和结构失效.本文利用可动边界变分问题对脱层扩展进行了分析,导出了脱层前缘各点处的能量释放率表达式.本文还对浅部椭圆脱层进行计算分析,指出:其能量释放率沿脱层边界有很大变化,脱层的扩展方向取决于脱层的形状、受载方式及铺层方向.     

Relative orientation constraints in the nonlinear large displacement analysis: application to soft materials

This study dealt with the dynamic stability and geometrical nonlinear problems of carbon nanotube/fiber/polymer composite (CNTFPC) cylindrical panels without or with delamination around a central cutout. A multiscale analysis using the Hewitt and Malherbe model was performed to determine the carbon nanotube (CNT) weight ratios, thickness–radius ratios, thickness–length ratios, and delamination area ratios around a cutout. A delamination around a central cutout was modeled in two dimensions by introducing continuity conditions of displacements at the delamination boundaries. The proposed approach in this study has been verified by previous studies. Parametric results showed the significance of a proper CNT ratio and curvature for better structural performance on the dynamic instability and nonlinearity of delaminated CNTFPC cylindrical panels.

     

General analytical solution to bending of composite laminated beams with delaminations

Based on the first-order shear deformable beam theory, a refined model for composite beams containing a through-the-width delamination is presented, and the deformation at the delamination front is considered. Different from the ordinary delami- nated beam theory, each of the perfectly bonded portions of the new model is constructed as two separated beams along the interface without assuming a plane section at the de- lamination front. The governing equations of the delaminated portions and bonded ones are established, combined with continuity conditions of displacements and internal forces. Solutions of delaminated composite beams with different boundary conditions, delamina- tion locations and sizes axe shown in excellent agreement with the finite element results, showing efficiency and applicability of the present model.     

Effects of voids on postbuckling delamination growth in unidirectional composites

This work examines the effects of manufacturing induced voids on the postbuckling behavior of delaminated unidirectional composites. In the finite element model developed, a through-width delamination is introduced close to one surface of a flat panel, and a void is placed in the delamination plane ahead of each delamination front. The panel is subjected to compression in the fiber direction. The postbuckling delamination growth is studied by calculating the strain energy release rate (SERR) using the virtual crack closure technique. Local stress analyses of the region near the delamination front are also performed to further investigate the void effects. It is found that although the presence of void does not significantly alter the postbuckling transverse displacement of the delaminated panel, the induced stress perturbation by the void affects the SERR. The Mode II SERR as well as the total SERR increase depending on the size of the void and its distance from the delamination front. Since the Mode I SERR shows non-monotonic behavior with the applied load, the effects of voids are studied on its maximum value.     

含内埋矩形脱层复合材料圆柱壳屈曲分析的混合变量条形传递函数方法

提出了一种分析含内埋矩形脱层正交各向异性圆柱壳稳定性问题的混合变量条形传递函数方法。首先基于Mindlin一阶剪切壳理论,通过定义圆柱壳的广义力变量和混合变量,建立了壳的改进混合变量能量泛函;然后,为了便于脱层壳的分区求解,通过引入条形单元,创建了基于混合变量条形传递函数解的含脱层和不合脱层两种超级壳单元;在此基础上,将含内埋矩形脱层的复合材料层合壳划分成两种超级壳单元的组合体,通过各超级壳单元相互之间连接结点处的位移连续和力平衡条件得到脱层壳的屈曲方程;最后由屈曲方程计算含内埋矩形脱层壳的屈曲载荷和屈曲模态。算例分析的结果验证了本方法的正确性,并给出了几种因素对屈曲载荷和屈曲模态的影响。