二硫化钼的电子显微分析

为了促进含ＭｏＳ２的润滑材料的应用及其基础研究的发展，利用电子显微分析技术研究了国产ＭｏＳ２的硫／钼原子比、颗粒形貌及其结构，给出了不同产地ＭｏＳ２粉末的粒径（从微米到纳米范围），以及ＭｏＳ２粘结膜和ＭｏＳ２溅射膜的形貌，并且指出当硫／钼原子比接近于２．００时，ＭｏＳ２溅射膜的耐磨寿命最长，同时还利用高分辨透电子显微照片和电子衍射图揭示了国产ＭｏＳ２的晶体结构及其参数，研究结果对含ＭｏＳ２润滑材料     

含硫镍合金的研制及其高温摩擦学特性

采用粉末冶金工艺和中频励磁感应加热高温快速热压成型法，研制出几种含硫和不含硫的镍合金高温自润滑耐磨材料，进而从中筛选出一种在室温和３００℃乃至６００℃都具有较高机械强度和低摩擦、耐磨损的含活性元素Ｓ的多元镍合金．对这种合金在较高速度和较高负荷条件下的摩擦学性能进行了试验研究，并且利用Ｘ射线衍射仪、Ｘ射线光电子能谱仪和Ｘ射线能量色散谱仪等揭示了这种合金的自润滑机理．结果表明：这种含硫镍合金在室温和３００℃下与ＷＣ－Ｎｉ－Ｃｏ－Ｍｏ－ＰｂＯ金属陶瓷对摩时，起润滑作用的主要是ＭｏＳ２和元素Ｃｒ与Ｓ的不定比化合物所形成的复合膜；在５００～６００℃的高温摩擦过程中，起润滑作用的主要是由不定比化合物ＣｒｘＳｙ与偶件转移物ＰｂＷＯ４及ＭｏＯ３和ＮｉＯ组成的复合膜     

Al2O3基陶瓷磨阻材料的磨擦磨损特性

在ＭＧ－２００磨损试验机上，对以Ａｌ２Ｏ３为基体，分别添加固体润滑剂组元石墨和氮化硼制备的２种陶瓷摩阻材料的摩擦磨损特性进行了试验研究。结果表明：在给定的试验条件下，添加石墨或氮化硼都可以改善材料摩擦性能的稳定性；分别在１００℃，２００℃，３００℃和４００℃下定温式试验时，这２种摩阻材料都具有较高的摩擦因数和良好的耐磨性，其中含氮化硼之摩阻材料的耐磨性比含石墨之摩阻材料的更好，前者在４００℃时的磨     

Ⅰ＋Ⅱ复合型弹塑性断裂的COD分析

以Ｒｉｃｅ的裂纹尖端钝化模型为基础定义了复合载荷下裂纹尖端的位移ＣＯＤ，ＣＴＯＤ和ＣＴＳＤ，ＣＴＯＤ和ＣＴＳＤ是复合型裂尖位移ＣＯＤ的Ⅰ和Ⅱ型分量。对铝合金Ｌｙ１２复合Ⅰ＋Ⅱ型弹塑性断裂行为进行了ＣＯＤ分析，并对复合载荷下ＣＯＤ与Ｊ积分关系进行了讨论。结果表明：（１）随Ⅱ型分量的增加，Ｌｙ１２启裂的ＣＯＤ值增加，纯Ⅱ型的启裂ＣＯＤ值理纯Ⅰ型的６倍：（２）Ｌｙ１２复合载荷下的ＣＯＤ与复合Ｊ积分值ＪＭ     

添加剂与铝合金的相互作用研究 Ⅰ.静态反应膜及油润滑下的摩擦学性能

静态下分别于２５℃，９０℃及１８０℃下进行硫化异丁烯（ＳＯ）、亚磷酸二正丁酯（ＤＢＰ）、ＳＯ＋ＤＢＰ的混合物（质量比２０∶１）、二烷基二硫代磷酸锌（ＺＤＤＰ）及十二酸（ＬＡ）５种添加剂均以质量分数为２％的比例添加到液体石蜡（ＬＰ）中与铝合金进行油浸试验．用动－静摩擦系数精密测定仪评价了在铝合金表面上所形成的静态反应膜的摩擦磨损行为，并考察了上述添加剂在ＬＰ中对铝合金－钢摩擦副的润滑作用．结果表明：静态反应膜的摩擦磨损行为与添加剂的化学活性密切相关，其中ＤＢＰ最易与铝合金发生反应，故其反应膜具有最低的摩擦系数和最长的耐磨寿命；ＺＤＤＰ在１８０℃下的静态反应膜具有较低的摩擦系数和较长的耐磨寿命；ＳＯ、ＳＯ与ＤＢＰ的混合物及ＬＡ的静态反应膜则不具有减摩抗磨性能，预示这些添加剂在ＬＰ中不与铝合金发生较强的化学作用．含上述添加剂的ＬＰ润滑下的摩擦磨损试验显示，ＤＢＰ与ＺＤＤＰ具有较好的摩擦学性能．这表明添加剂在铝合金表面静态反应膜的摩擦磨损试验结果与其在常规润滑下的具有较好的相关性．     

铜基电接触复合材料的研究

目前，国内外主要用银及其合金作为低压电器中的低、中负荷触头的基体材料，由于银的价格昂贵，研制无银电触头材料显然具有重要的经济意义，因此，利用粉末冶金法制成功的了几种铜基电接触复合材料，并具着重就其中的Ｃｕ－石墨（３）－ＺＯ（２）－Ｗ忱种四组元材料触头与银触头的主要性能作了系统的对比和摩擦学特性都达到或了银触头的水平，石墨在铜基材料中的分布均匀，不仅对材料具有保护作用，而且还能够起润滑和抗熔焊作用；     

往复摩擦下热压镍－二硫化钼复合材料的自润滑性能及其耐磨机理研究

对于含ＭｏＳ２的复合材料在单向滑动摩擦条件下的实用性能，人们已经进行了比较多的研究，然而好多摩擦部件在工程实际中经受的却都是往复摩擦。为了探明热压Ｎｉ－ＭｏＳ２复合材料的自润滑性能及其耐磨机理，在往复摩擦条件下研究了这种材料盘表面和偶件ＧＣｒ１５钢球表面之ＭｏＳ２膜的形成过程与形貌特征，并且利用扫描电子显微镜等观察分析了ＭＯＳ２膜的磨损表面形貌及其微区成分。结果表明，在给定的往复摩擦条件下，对偶双方表面都形成了具有层状结构的ＭｏＳ２润滑膜，这种膜是通过疲劳剥落、转移、粘附与叠压等方式所形成；ＭｏＳ２含量对Ｎｉ－ＭｏＳ２复合材料自润滑性能的影响，主要取决于它是否能够在对偶双方表面形成分布均匀而稳定的润滑膜，含６０％（ｗｔ）ＭｏＳ２的复合材料的自润滑性能最好；Ｎｉ－ＭｏＳ２复合材料的自润滑性是通过其表面ＭｏＳ２膜的连续生成与疲劳剥落，并在偶件表面形成转移膜，使复合材料与金属间的摩擦变成复合材料表面ＭｏＳ２膜与偶件表面ＭｏＳ２膜之间的摩擦所实现。由此可见，Ｎｉ－ＭＯＳ２复合材料是适合在往复摩擦运动场合应用的一种性能良好的自润滑复合材料。     

几种挖泥船耙齿材料的磨粒磨损性能研究

挖泥船耙齿材料的磨粒磨损性能值得深入研究．因此，在水润滑和无润滑条件下，利用ＭＬ－１００磨粒磨损试验机研究了不同成分和不同热处理工艺处理的耙齿材料的抗磨粒磨损性能与硬度及冲击性能的关系．结果表明，几种材料在水润滑条件下的磨损量都比在无润滑下的大，具有较高硬度和一次冲击韧性ＣＶＮ值的材料的抗磨粒磨损性能较好     

等离子喷涂碳化铬－镍铬涂层的摩擦学特性

在发展新型高效节能的汽车和飞机发动机用耐磨材料中，碳化铬－镍铬涂层是很有开发前景的材料之一．为了扩大这种涂层的应用领域并为其应用提供科学依据，用ＭＭ－２００磨损试验机，研究了等离子喷涂碳化铬－镍铬（质量比为３∶１）涂层分别与不锈钢、热压烧结Ｓｉ３Ｎ４和石墨组成摩擦副的摩擦学特性；用扫描电子显微镜、Ｘ射线能量色散谱仪和Ｘ射线衍射技术，考察了磨痕和磨屑的形貌、元素分布和物相组成；讨论了涂层分别与给定的３种材料配副时的磨损机理．结果表明：涂层与不同材料对摩时的磨损量差别很大，磨损机理也明显不同——涂层与不锈钢对摩时的磨损表现为层状颗粒的断裂与剥离；涂层与Ｓｉ３Ｎ４对摩时的磨损主要表现为涂层颗粒的断裂和断裂颗粒的脱碳氧化；石墨对涂层具有润滑作用     

Al_2O_3 基陶瓷摩阻材料的摩擦磨损特性

在ＭＧ－２００磨损试验机上，对以Ａｌ２Ｏ３为基体，分别添加固体润滑剂组元石墨和氮化硼制备的２种陶瓷摩阻材料的摩擦磨损特性进行了试验研究．结果表明：在给定的试验条件下，添加石墨或氮化硼都可以改善材料摩擦性能的稳定性；分别在１００℃，２００℃，３００℃和４００℃下定温试验时，这２种摩阻材料都具有较高的摩擦因数和良好的耐磨性，其中含氮化硼之摩阻材料的耐磨性比含石墨之摩阻材料的更好，前者在４００℃时的磨损率仅为后者在同温时的１／２．     

Revisiting the generalized self-consistent scheme in composites: Clarification of some aspects and a new formulation

The determination of an effective property in composite materials necessitates the knowledge of some averaged field quantities in the constituents (like the average heat intensity or average strain) of a composite sample, which is subjected to homogeneous boundary conditions. In the generalized self-consistent scheme (GSCS) which is today a classical micromechanics model suited for the determination of the effective properties of matrix-based composites, those average quantities are estimated by using an auxiliary configuration in which a particulate phase is first surrounded by some matrix material and then embedded in the effective medium. In the present study, we revisit the GSCS both for two- and multi-phase matrix-based composites containing spherical particles, and clarify aspects related to the volume fractions of the particle core and matrix shell within the composite element which is embedded in the effective medium. The contribution of this study is believed to be mainly on the conceptual side and resides in a new formulation of the method in which the embedding volume fractions are determined in the course of the analysis by means of some fundamental relations on the averaged fields. The study is carried out in thermal conduction and elasticity and contains new results on the effective shear modulus of multi-phase composites.     

Simple algebraic approximations for the effective elastic moduli of cubic arrays of spheres

Recently, Cohen and Bergman (Phys. Rev. B 68 (2003a) 24104) applied the method of elastostatic resonances to the three-dimensional problem of nonoverlapping spherical isotropic inclusions arranged in a cubic array in order to calculate the effective elastic moduli. The leading order in this systematic perturbation expansion, which is related to the Clausius-Mossotti approximation of electrostatics, was obtained in the form of simple algebraic expressions for the elastic moduli. Explicit expressions were derived for the case of a simple cubic array of spheres, and comparison was made with some accurate results. Here, we present explicit expressions for the effective elastic moduli of base-centered and face-centered cubic arrays as well, and make a comparison with other estimates and with accurate numerical results. The simple algebraic expressions provide accurate results at low volume fractions of the inclusions and are good estimates at moderate volume fractions even when the contrast is high.     

Dramatically stiffer elastic composite materials due to a negative stiffness phase?

Composite materials of extremely high stiffness can be produced by employing one phase of negative stiffness. Negative stiffness entails a reversal of the usual codirectional relationship between force and displacement in deformed objects. Negative stiffness structures and materials are possible, but unstable by themselves. We argue here that composites made with a small volume fraction of negative stiffness inclusions can be stable and can have overall stiffness far higher than that of either constituent. This high composite stiffness is demonstrated via several exact solutions within linearized and also fully nonlinear elasticity, and via the overall modulus tensor estimate of a variational principle valid in this case. We provide an initial discussion of stability, and adduce experimental results which show extreme composite behavior in selected viscoelastic systems under sub-resonant sinusoidal load. Viscoelasticity is known to expand the space of stability in some cases. We have not yet proved that purely elastic composite materials of the types proposed and analyzed in this paper will be stable under static load. The concept of negative stiffness inclusions is buttressed by recent experimental studies illustrating related phenomena within the elasticity and viscoelasticity contexts.     

Effective elastic properties of periodic composite medium

A new method is presented for calculating the bulk effective elastic stiffness tensor of a two-component composite with a periodic microstructure. The basic features of this method are similar to the one introduced by Bergman and Dunn (1992) for the dielectric problem. It is based on a Fourier representation of an integro-differential equation for the displacement field, which is used to produce a continued-fraction expansion for the elastic moduli. The method enabled us to include a much larger number of Fourier components than some previously proposed Fourier methods. Consequently our method provides the possibility of performing reliable calculations of the effective elastic tensor of periodic composites that are neither dilute nor low contrast, and are not restricted to arrays of nonoverlapping inclusions. We present results for a cubic array of nonoverlapping spheres, intended to serve as a test of quality, as well as results for a cubic array of overlapping spheres and a two dimensional hexagonal array of circles (a model for a fiber reinforced material) for comparison with previous work.     

Elasticity and strength of partially sintered ceramics

A discrete element model for the elastic and fracture behavior of partially sintered ceramics is presented. It accounts for the granular character of the material when a large amount of porosity (typically >0.2-0.4) is left after sintering. The model uses elastic force-displacement laws to represent the bond formed between particles during sintering. Bond fracture in tension and shearing is accounted for in the model. Realistic numerical microstructures are generated using a sintering model on random particle packings. In particular, packings with fugitive pore formers are used to create partially sintered microstructures with large pores. The effective elastic response and the strength of these microstructures are calculated in tension and compression. The link between important microstructural features such as bond size or coordination number and macroscopic behavior is investigated. In particular, it is shown that porosity alone is not sufficient to account for the mechanical properties of a partially sintered material.     

异弹模光弹材料性能的试验研究

本文叙述了不同弹模材料的制作、材料光学和力学性能的测试及其主要结果。分析了不同弹模材料在不同温度条件下的基本特性和变化规律。探讨了固化剂、高分子树脂含量与材料性能的相互关系和影响。     

The elastic response of a cohesive aggregate—a discrete element model with coupled particle interaction

A model is presented for the deformation of a cohesive aggregate of elastic particles that incorporates two important effects of large-sized inter-particle junctions. A finite element model is used to derive a particle response rule, for both normal and tangential relative deformations between pairs of particles. This model agrees with the Hertzian contact theory for small junctions, and is valid for junctions as large as half the nominal particle size. Further, the aggregate model uses elastic superposition to account for the coupled force–displacement response due to the simultaneous displacement of all of the neighbors of each particle in the aggregate. A particle stiffness matrix is developed, relating the forces at each junction to the three displacement degrees of freedom at all of the neighboring-particle junctions. The particle response satisfies force and moment equilibrium, so that the model is properly posed to allow for rigid rotation of the particle without introducing rotational degrees of freedom. A computer-simulated sintering algorithm is used to generate a random particle packing, and the stiffness matrix is derived for each particle. The effective elastic response is then estimated using a mean field or affine displacement calculation, and is also found exactly by a discrete element model, solving for the equilibrium response of the aggregate to uniform-strain boundary conditions. Both the estimate and the exact solution compare favorably with experimental data for the bulk modulus of sintered alumina, whereas Hertzian contact-based models underestimate the modulus significantly. Poisson's ratio is, however, accurately determined only by the full equilibrium discrete element solution, and shown to depend significantly on whether or not rigid particle rotation is permitted in the model. Moreover, this discrete element model is sufficiently robust, so it can be applied to problems involving non-homogeneous deformations in such cohesive aggregates.     

不均匀磁电弹板中的厚度扭曲波的传播

压电-压磁复合材料或结构的许多应用是与弹性波的传播密切相关的,这要求人们首先从理论的角度弄清楚弹性波的传播规律。本文研究由多个不均匀磁电弹介质组成的薄板厚度扭曲波的传播性质,从磁电弹全耦合场三维方程出发得到了其精确解,根据所得到的解分析了波的传播特征,这些结果对于理解和设计谐振器、滤波器以及声波元件提供了有价值的理论基础。     

Finite deformation of incompressible fiber-reinforced elastomers: A computational micromechanics approach

The in-plane finite deformation of incompressible fiber-reinforced elastomers was studied using computational micromechanics. Composite microstructure was made up of a random and homogeneous dispersion of aligned rigid fibers within a hyperelastic matrix. Different matrices (Neo-Hookean and Gent), fibers (monodisperse or polydisperse, circular or elliptical section) and reinforcement volume fractions (10–40%) were analyzed through the finite element simulation of a representative volume element of the microstructure. A successive remeshing strategy was employed when necessary to reach the large deformation regime in which the evolution of the microstructure influences the effective properties. The simulations provided for the first time “quasi-exact” results of the in-plane finite deformation for this class of composites, which were used to assess the accuracy of the available homogenization estimates for incompressible hyperelastic composites.     

On the effective stress in unsaturated porous continua with double porosity

Using mixture theory we formulate the balance laws for unsaturated porous media composed of a double-porosity solid matrix infiltrated by liquid and gas. In this context, the term ‘double porosity’ pertains to the microstructural characteristic that allows the pore spaces in a continuum to be classified into two pore subspaces. We use the first law of thermodynamics to identify energy-conjugate variables and derive an expression for the ‘effective’, or constitutive, stress that is energy-conjugate to the rate of deformation of the solid matrix. The effective stress has the form , where σ is the total Cauchy stress tensor, B is the Biot coefficient, and is the mean fluid pressure weighted according to the local degrees of saturation and pore fractions. We identify other emerging energy-conjugate pairs relevant for constitutive modeling of double-porosity unsaturated continua, including the local suction versus degree of saturation pair and the pore volume fraction versus weighted pore pressure difference pair. Finally, we use the second law of thermodynamics to determine conditions for maximum plastic dissipation in the regime of inelastic deformation for the unsaturated two-porosity mixture.