Field structure at mode Ⅲ dynamically propagating crack tip in elastic-viscoplastic materials

An elastic-viscoplastic mechanics model is used to investigate asymptotically the mode Ⅲ dynamically propagating crack tip field in elastic-viscoplastic materials. The stress and strain fields at the crack tip possess the same power-law singularity under a linear-hardening condition. The singularity exponent is uniquely determined by the viscosity coefficient of the material. Numerical results indicate that the motion parameter of the crack propagating speed has little effect on the zone structure at the crack tip. The hardening coefficient dominates the structure of the crack-tip field. However, the secondary plastic zone has little influence on the field. The viscosity of the material dominates the strength of stress and strain fields at the crack tip while it does have certain influence on the crack-tip field structure. The dynamic crack-tip field degenerates into the relevant quasi-static solution when the crack moving speed is zero. The corresponding perfectly-plastic solution is recovered from the linear-hardening solution when the hardening coefficient becomes zero.     

Field structure at mode III dynamically propagating crack tip in elastic-viscoplastic materials

An elastic-viscoplastic mechanics model is used to investigate asymptotically the mode Ⅲ dynamically propagating crack tip field in elastic-viscoplastic materials. The stress and strain fields at the crack tip possess the same power-law singularity under a linear-hardening condition. The singularity exponent is uniquely determined by the viscosity coefficient of the material. Numerical results indicate that the motion parameter of the crack propagating speed has little effect on the zone structure at the crack tip. The hardening coefficient dominates the structure of the crack-tip field. However, the secondary plastic zone has little influence on the field. The viscosity of the material dominates the strength of stress and strain fields at the crack tip while it does have certain influence on the crack-tip field structure. The dynamic crack-tip field degenerates into the relevant quasi-static solution when the crack moving speed is zero. The corresponding perfectly-plastic solution is recovered from the linear-hardening solution when the hardening coefficient becomes zero.     

蠕变硬化材料中Ⅱ型扩展裂纹尖端场特性研究

采用弹牯塑性力学模型,对蠕变硬化材料中平面应变扩展裂纹尖端场进行了渐近分析.假设人工粘性系数与等效塑性应变率的幂次成反比,通过量级匹配表明应力和应变均具有幂奇异性,奇异性指数由粘性系数中等效塑性应变率的幂指数唯一确定.通过数值计算讨论了Ⅱ型准静态扩展裂纹尖端场的分区构造以及裂纹尖端应力和应变场的特性随各材料参数的变化规律,结果表明裂尖场由材料的粘性和塑性共同主导.当硬化系数为零时裂尖场可退化为相应的HR场.     

I型定常扩展裂纹尖端的弹黏塑性场

考虑材料在扩展裂纹尖端的黏性效应，假设黏性系数与塑性应变率的幂次成反比，对幂硬化材料中平面应变扩展裂纹尖端场进行了弹黏塑性渐近分析，得到了不含间断的连续解，并讨论了I型裂纹数值解的性质随各参数的变化规律. 分析表明应力和应变均具有幂奇异性，并且只有在线性硬化时，尖端场的弹、黏、塑性才可以合理匹配. 对于I型裂纹，裂尖场不含弹性卸载区. 当裂纹扩展速度趋于零时，动态解趋于准静态解，表明准静态解是动态解的特殊形式；如果进一步考虑硬化系数为零的极限情况，便可退化为Hui和Riedel的非线性黏弹性解.     

Perfect elastic-viscoplastic field at mode I dynamic propagating crack-tip

The viscosity of material is considered at propagating crack-tip. Under the assumption that the artificial viscosity coefficient is in inverse proportion to power law of the plastic strain rate, an elastic-viscoplastic asymptotic analysis is carried out for moving crack-tip fields in power-hardening materials under plane-strain condition. A continuous solution is obtained containing no discontinuities. The variations of numerical solution are discussed for mode I crack according to each parameter. It is shown that stress and strain both possess exponential singularity. The elasticity, plasticity and viscosity of material at crack-tip only can be matched reasonably under linear-hardening condition. And the tip field contains no elastic unloading zone for mode I crack. It approaches the limiting case, crack-tip is under ultra-viscose situation and energy accumulates, crack-tip begins to propagate under different compression situations.     

Perfect elastic-viscoplastic field at mode Ⅰ dynamic propagating crack-tip

The viscosity of material is considered at propagating crack-tip. Under the assumption that the artificial viscosity coefficient is in inverse proportion to power law of the plastic strain rate, an elastic-viscoplastic asymptotic analysis is carried out for moving crack-tip fields in power-hardening materials under plane-strain condition. A continuous solution is obtained containing no discontinuities. The variations of numerical solution are discussed for mode Ⅰ crack according to each parameter. It is shown that stress and strain both possess exponential singularity. The elasticity, plasticity and viscosity of material at crack-tip only can be matched reasonably under linear-hardening condition. And the tip field contains no elastic unloading zone for mode Ⅰ crack. It approaches the limiting case, crack-tip is under ultra-viscose situation and energy accumulates, crack-tip begins to propagate under different compression situations.     

Pseudo plane stress plastic field for mode I crack growth

The pseudo plane stress field for a mode I crack growth is analyzed for both perfectly plastic and power law hardening plastic materials. When finite strain is taken into account, it is found that for perfectly plastic materials, the plastic domain is a narrow strip ahead of the crack tip. For power law hardening plastic material, the plastic domain contains a strip and a region ahead of the strip. The fracture criterion is discussed. The energy dissipated in the plastic strip is found to be proportional to the square of the thickness. Singular solutions to the field are ruled out by analysis.     

Damage accumulation for growth of anti-plane crack in work-hardening material

Elastic–plastic solutions of an anti-plane crack in an infinite body are used in conjunction with a continuum damage model to describe the conditions necessary for the onset of crack instability, fatigue crack propagation due to cyclic loading, and rates of crack growth due to time dependent events. A power law relates the stress to the strain of the material. The damage, which invokes nucleation, growth and coalescence of microvoids due to elevated strain, is confined to the plastic zone surrounding the crack tip. For applied loading below the yield stress, the small-scale and large-scale yielding solutions are used to determine the influence of strain hardening on crack instability and failure. Crack growth due to cyclic loading and time-dependent deformations are studied using the small-scale yielding solution of the deformation theory of plasticity.     

Mode II dynamic fields near a crack tip growing in an elastic-perfectly-plastic solid

An asymptotic solution is given for Mode II dynamic fields in the neighborhood of the tip of a steadily advancing crack in an incompressible elastic—perfectly-plastic solid (plane strain). It is shown that, like for Modes I and III (Gao and Nemat-Nasser, 1983), the complete dynamic solution for Mode II predicts a logarithmic singularity for the strain field, but unlike for those modes which involve no elastic unloading, the pure Mode II solution includes two elastic sectors next to the stress-free crack surfaces. This is in contradiction to the quasi-static solution which predicts a small central plastic zone, followed by two large elastic zones, and then two very small plastic zones adjacent to the stress-free crack faces. The stress field for the complete dynamic solution varies throughout the entire crack tip neighborhood, admitting finite jumps at two shock fronts within the central plastic sector. This dynamic stress field is consistent with that of the stationary crack solution, and indeed reduces to it as the crack growth speed becomes zero.     

Singular plastic fields in wedge indentation of pressure sensitive solids

The paper examines singular plastic fields induced near the tip of a wedge indentating a pressure sensitive solid. Plane strain conditions are assumed and material response is modelled by the small strain Drucker–Prager rigid/plastic constitutive law. A standard separation of variables solution is numerically generated for pure power-law hardening. Three possible measures of wall roughness are studied with an attempt to expose the coupling between wall friction and material pressure sensitivity. Sample calculations illustrate that stress singularity decreases with increasing friction, wedge angle and hardening exponent, but increases with pressure sensitivity. At large values of the hardening exponent, when the material is nearly perfectly plastic, effective stress contours approach the slip line limit. The concept of indentation index is introduced as a possible estimate for average indentation pressure.     

Pseudo plane stress mode II crack growth in plastic materials

The near tip field of mode II crack that grows in thin bodies with power hardening or perfectly plastic behavior is analyzed. It is shown that for power hardening behavior, the pseudo plane stress field possesses the logarithm singularity, i.e. σ (ln r)²/(n−1), (ln r)^{2n/(n − 1)}, where r is the distance from the crack tip, n the hardening exponent is σⁿ. When n → ∞ the solution reduced to that for the perfectly plastic case.     

Finite element solutions for plane strain mode I crack with strain gradient effects

In this paper, a new phenomenological theory with strain gradient effects is proposed to account for the size dependence of plastic deformation at micro- and submicro-length scales. The theory fits within the framework of general couple stress theory and three rotational degrees of freedom ω_i are introduced in addition to the conventional three translational degrees of freedom u_i. ω_i is called micro-rotation and is the sum of material rotation plus the particles' relative rotation. While the new theory is used to analyze the crack tip field or the indentation problems, the stretch gradient is considered through a new hardening law. The key features of the theory are that the rotation gradient influences the material character through the interaction between the Cauchy stresses and the couple stresses; the term of stretch gradient is represented as an internal variable to increase the tangent modulus. In fact the present new strain gradient theory is the combination of the strain gradient theory proposed by Chen and Wang (Int. J. Plast., in press) and the hardening law given by Chen and Wang (Acta Mater. 48 (2000a) 3997). In this paper we focus on the finite element method to investigate material fracture for an elastic-power law hardening solid. With remotely imposed classical K fields, the full field solutions are obtained numerically. It is found that the size of the strain gradient dominance zone is characterized by the intrinsic material length l₁. Outside the strain gradient dominance zone, the computed stress field tends to be a classical plasticity field and then K field. The singularity of stresses ahead of the crack tip is higher than that of the classical field and tends to the square root singularity, which has important consequences for crack growth in materials by decohesion at the atomic scale.     

Effects of characteristic material lengths on mode III crack propagation in couple stress elastic–plastic materials

The asymptotic fields near the tip of a crack steadily propagating in a ductile material under Mode III loading conditions are investigated by adopting an incremental version of the indeterminate theory of couple stress plasticity displaying linear and isotropic strain hardening. The adopted constitutive model is able to account for the microstructure of the material by incorporating two distinct material characteristic lengths. It can also capture the strong size effects arising at small scales, which results from the underlying microstructures. According to the asymptotic crack tip fields for a stationary crack provided by the indeterminate theory of couple stress elasticity, the effects of microstructure mainly consist in a switch in the sign of tractions and displacement and in a substantial increase in the singularity of tractions ahead of the crack-tip, with respect to the classical solution of LEFM and EPFM. The increase in the stress singularity also occurs for small values of the strain hardening coefficient and is essentially due to the skew-symmetric stress field, since the symmetric stress field turns out to be non-singular. Moreover, the obtained results show that the ratio η introduced by Koiter has a limited effect on the strength of the stress singularity. However, it displays a strong influence on the angular distribution of the asymptotic crack tip fields.     

An Element Free Galerkin analysis of steady dynamic growth of a mode i crack in elastic–plastic materials

An Element Free Galerkin (EFG) method based formulation for steady dynamic crack growth in elastic–plastic materials is developed. A domain convecting parallel to the steadily moving crack tip is employed. The EFG methodology eliminates the stringent mesh requirements of the Finite Element Method (FEM) for such problems. Both rate-independent materials and rate-dependent materials are considered. The material is characterized by von Mises yielding condition and an associated flow rule. For rate-independent materials, both the influence of crack speeds and that of strain hardening on the mechanics of steady dynamic crack growth are investigated. For rate-dependent materials, only a non-hardening material is considered with emphasis on determining the influence of viscous properties of materials and crack speeds. The influence of strain hardening on steady dynamic crack growth shows the same trends as for steady quasi-static crack growth. The simplifications used in the literature in deriving analytical solutions for high strain-rate crack growth have been examined thoroughly using the numerical results.     

粘弹塑性材料动态裂纹尖端场

本文采用一种弹性/粘塑性模型,对扩展裂纹尖端应力应变场进行了渐近分析。文中假定,弹性阶段的粘性效应可以略去,仅在塑性应变中粘性才起作用。对这种模型,文中导出了一种率敏感型的本构关系。并进一步导出了裂纹尖端应力应变场的动力学方程。通过量级分析,给出了尖端场的应力应变奇异性指数。并且讨论了弹性,塑性及粘性三者的匹配条件。对Ⅲ型裂纹进行了具体的分析计算。对各个不同参数的选取进行了详细的分析,讨论了解的性质随各参数的变化规律。     

幂硬化可压缩材料Ⅰ型动态裂纹尖端奇异场

研究了平面应变条件下幂硬化可压缩材料中定常扩展的Ⅰ型动态裂纹尖端应力应变奇异场．采用Ｊ２流动理论和场量直角坐标分量，得到了应力应变奇异性不同时的裂纹尖端渐近场，其中场量的角变化规律和理想弹塑性材料的完全相同     

The singular field near a sharp notch with mixed boundary conditions for hardening materials under longitudinal shear

The field behavior near a sharp notch tip with mixed homogeneous stress and displacement boundary conditions is examined for a power law hardening material. Using the hodograph transformation, the singularity and the angular distribution of the fields are determined. Special cases as those for linear elastic and perfect plastic materials are discussed.     

Analyses of steady quasistatic crack growth in plane strain tension in elastic-plastic materials with non-isotropic hardening

Steady state crack propagation problems of elastic-plastic materials in Mode I, plane strain under small scale yielding conditions were investigated with the aid of the finite element method. The elastic-perfectly plastic solution shows that elastic unloading wedges subtended by the crack tip in the plastic wake region do exist and that the stress state around the crack tip is similar to the modified Prandtl fan solution. To demonstrate the effects of a vertex on the yield surface, the small strain version of a phenomenological J₂, corner theory of plasticity (Christoffersen, J. and Hutchinson, J. W. J. Mech. Phys. Solids,27, 465 C 1979) with a power law stress strain relation was used to govern the strain hardening of the material. The results are compared with the conventional J₂ incremental plasticity solution. To take account of Bauschinger like effects caused by the stress history near the crack tip, a simple kinematic hardening rule with a bilinear stress strain relation was also studied. The results are again compared with the smooth yield surface isotropic hardening solution for the same stress strain curve. There appears to be more potential for steady state crack growth in the conventional J₂ incremental plasticity material than in the other two plasticity laws considered here if a crack opening displacement fracture criterion is used. However, a fracture criterion dependent on both stress and strain could lead to a contrary prediction.     

Crack tip asymptotic character of anti-plane stress and strain rate for linear fractional constitutive relations

Linear-fractional strain rate and stress relations are used to simulate materials undergoing steady state creep. The crack tip asymptotic character of the stress and strain rate field is obtained in exact and approximate form. In the limit as the radial distance emanating from the crack tip approaches zero, the stress field corresponds to that for an ideal plastic material while the exact and approximate solutions tend to coincide. Discussed is the nonhomogeneous singular character of the strain rate field that possess different orders of singularities in a circular region around the crack tip.     

Effect of crack-tip shape on the near-tip field in glassy polymer

The physical nature of a crack tip is not absolutely sharp but blunt with finite curvature. In this paper, the effects of crack-tip shape on the stress and deformation fields ahead of blunted cracks in glassy polymers are numerically investigated under Mode I loading and small scale yielding conditions. An elastic–viscoplastic constitutive model accounting for the strain softening upon yield and then the subsequently strain hardening is adopted and two typical glassy polymers, one with strain hardening and the other with strain softening–rehardening are considered in analysis. It is shown that the profile of crack tip has obvious effect on the near-tip plastic field. The size of near-tip plastic zone reduces with the increase of curvature radius of crack tip, while the plastic strain rate and the stresses near crack tip enhance obviously for two typical polymers. Also, the plastic energy dissipation behavior near cracks with different curvatures is discussed for both materials.