Nonlinear dynamic analysis of Timoshenko beams by BEM. Part I: Theory and numerical implementation

In this two-part contribution, a boundary element method is developed for the nonlinear dynamic analysis of beams of arbitrary doubly symmetric simply or multiply connected constant cross section, undergoing moderate large displacements and small deformations under general boundary conditions, taking into account the effects of shear deformation and rotary inertia. Part I is devoted to the theoretical developments and their numerical implementation and Part II discusses analytical and numerical results obtained from both analytical or numerical research efforts from the literature and the proposed method. The beam is subjected to the combined action of arbitrarily distributed or concentrated transverse loading and bending moments in both directions as well as to axial loading. To account for shear deformations, the concept of shear deformation coefficients is used. Five boundary value problems are formulated with respect to the transverse displacements, to the axial displacement and to two stress functions and solved using the Analog Equation Method, a BEM based method. Application of the boundary element technique yields a nonlinear coupled system of equations of motion. The solution of this system is accomplished iteratively by employing the average acceleration method in combination with the modified Newton–Raphson method. The evaluation of the shear deformation coefficients is accomplished from the aforementioned stress functions using only boundary integration. The proposed model takes into account the coupling effects of bending and shear deformations along the member, as well as the shear forces along the span induced by the applied axial loading.

     

Nonlinear analysis of beams of variable cross section,including shear deformation effect

In this paper the analog equation method (AEM), a BEM-based method, is employed for the nonlinear analysis of a Timoshenko beam with simply or multiply connected variable cross section undergoing large deflections under general boundary conditions. The beam is subjected in an arbitrarily concentrated or distributed variable axial loading, while the shear loading is applied at the shear center of the cross section, avoiding in this way the induction of a twisting moment. To account for shear deformations, the concept of shear deformation coefficients is used. Five boundary value problems are formulated with respect to the transverse displacements, the axial displacement and to two stress functions and solved using the AEM. Application of the boundary element technique yields a system of nonlinear equations from which the transverse and axial displacements are computed by an iterative process. The evaluation of the shear deformation coefficients is accomplished from the aforementioned stress functions using only boundary integration. Numerical examples with great practical interest are worked out to illustrate the efficiency, the accuracy and the range of applications of the developed method. The influence of the shear deformation effect is remarkable.     

Nonlinear analysis of shear deformable beam-columns partially supported on tensionless three-parameter foundation

In this paper, a boundary element method is developed for the nonlinear analysis of shear deformable beam-columns of arbitrary doubly symmetric simply or multiply connected constant cross-section, partially supported on tensionless three-parameter foundation, undergoing moderate large deflections under general boundary conditions. The beam-column is subjected to the combined action of arbitrarily distributed or concentrated transverse loading and bending moments in both directions as well as to axial loading. To account for shear deformations, the concept of shear deformation coefficients is used. Five boundary value problems are formulated with respect to the transverse displacements, to the axial displacement and to two stress functions and solved using the Analog Equation Method, a BEM-based method. Application of the boundary element technique yields a system of nonlinear equations from which the transverse and axial displacements are computed by an iterative process. The evaluation of the shear deformation coefficients is accomplished from the aforementioned stress functions using only boundary integration. The proposed model takes into account the coupling effects of bending and shear deformations along the member as well as the shear forces along the span induced by the applied axial loading. Numerical examples are worked out to illustrate the efficiency, wherever possible, the accuracy and the range of applications of the developed method.     

Shear deformation effect in non-linear analysis of composite beams of variable cross section

In this paper the non-linear analysis of a composite Timoshenko beam with arbitrary variable cross section undergoing moderate large deflections under general boundary conditions is presented employing the analog equation method (AEM), a BEM-based method. The composite beam consists of materials in contact, each of which can surround a finite number of inclusions. The materials have different elasticity and shear moduli with same Poisson's ratio and are firmly bonded together. The beam is subjected in an arbitrarily concentrated or distributed variable axial loading, while the shear loading is applied at the shear center of the cross section, avoiding in this way the induction of a twisting moment. To account for shear deformations, the concept of shear deformation coefficients is used. Five boundary value problems are formulated with respect to the transverse displacements, the axial displacement and to two stress functions and solved using the AEM. Application of the boundary element technique yields a system of non-linear equations from which the transverse and axial displacements are computed by an iterative process. The evaluation of the shear deformation coefficients is accomplished from the aforementioned stress functions using only boundary integration. Numerical examples are worked out to illustrate the efficiency, the accuracy, the range of applications of the developed method and the influence of the shear deformation effect.     

热荷载作用下Timoshenko功能梯度夹层梁的静态响应

在精确考虑轴线伸长和一阶横向剪切变形的基础上建立了Timoshenko功能梯度夹层梁在热载荷作用下的几何非线性控制方程.采用打靶法数值求解所得强非线性边值问题,获得了两端固支功能梯度夹层梁在横向非均匀升温作用下的静态热过屈曲和热弯曲变形数值解.分析了功能梯度材料参数变化、不同表层厚度和升温参数对夹层梁弯曲变形、拉-弯耦...     

Nonlinear flexural–torsional dynamic analysis of beams of variable doubly symmetric cross section—application to wind turbine towers

In this paper, a boundary element solution is developed for the nonlinear flexural–torsional dynamic analysis of beams of arbitrary doubly symmetric variable cross section, undergoing moderate large displacements, and twisting rotations under general boundary conditions, taking into account the effect of rotary and warping inertia. The beam is subjected to the combined action of arbitrarily distributed or concentrated transverse loading in both directions and to twisting and/or axial loading. Four boundary-value problems are formulated with respect to the transverse displacements, to the axial displacement, and to the angle of twist and solved using the Analog Equation Method, a Boundary Element Method (BEM) based technique. Application of the boundary element technique yields a system of nonlinear coupled Differential–Algebraic Equations (DAE) of motion, which is solved iteratively using the Petzold–Gear Backward Differentiation Formula (BDF), a linear multistep method for differential equations coupled with algebraic equations. Numerical examples of great practical interest including wind turbine towers are worked out, while the influence of the nonlinear effects to the response of beams of variable cross section is investigated.     

NONLINEAR VIBRATIONS OF AXIALLY ACCELERATING VISCOELASTIC TIMOSHENKO BEAMS

研究了轴向加速黏弹性Timoshenko梁的非线性参数振动。参数激励是由径向变化张力和轴向速度波动引起的。引入了取决于轴向加速度的径向变化张力,同时还考虑了有限支撑刚度对张力的影响。应用广义哈密尔顿原理建立了Timoshenko梁耦合平面运动的控制方程和相关的边界条件。黏弹性本构关系采用Kelvin模型并引入物质时间导数。耦合方程简化为具有随时间和空间变化系数的积分-偏微分型非线性方程。采用直接多尺度法分析了Timoshenko梁的组合参数共振。根据可解性条件得到了Timoshenko梁的稳态响应,并应用Routh-Hurvitz判据确定了稳态响应的稳定性。最后通过一系列数值例子描述了黏弹性系数、平均轴向速度、剪切变形系数、转动惯量系数、速度脉动幅值、有限支撑刚度参数以及非线性系数对稳态响应的影响。     

Dynamic response to a moving load of a Timoshenko beam resting on a nonlinear viscoelastic foundation

The present paper investigates the dynamic response of finite Timoshenko beams resting on a sixparameter foundation subjected to a moving load. It is for the first time that the Galerkin method and its convergence are studied for the response of a Timoshenko beam supported by a nonlinear foundation. The nonlinear Pasternak foundation is assumed to be cubic. Therefore, the efects of the shear deformable beams and the shear deformation of foundations are considered at the same time. The Galerkin method is utilized for discretizing the nonlinear partial differential governing equations of the forced vibration. The dynamic responses of Timoshenko beams are determined via the fourth-order Runge–Kutta method. Moreover, the efects of diferent truncation terms on the dynamic responses of a Timoshenko beam resting on a complex foundation are discussed. The numerical investigations shows that the dynamic response of Timoshenko beams supported by elastic foundations needs super high-order modes. Furthermore, the system parameters are compared to determine the dependence of the convergences of the Galerkin method.     

Free vibration analyses of axially loaded laminated composite beams based on higher-order shear deformation theory

The dynamic stiffness matrix method is introduced to solve exactly the free vibration and buckling problems of axially loaded laminated composite beams with arbitrary lay-ups. The Poisson effect, axial force, extensional deformation, shear deformation and rotary inertia are included in the mathematical formulation. The exact dynamic stiffness matrix is derived from the analytical solutions of the governing differential equations of the composite beams based on third-order shear deformation beam theory. The application of the present method is illustrated by two numerical examples, in which the effects of axial force and boundary condition on the natural frequencies, mode shapes and buckling loads are examined. Comparison of the current results to the existing solutions in the literature demonstrates the accuracy and effectiveness of the present method.     

THERMAL POST-BUCKLING OF FUNCTIONALLY GRADED MATERIAL TIMOSHENKO BEAMS

Analysis of thermal post-buckling of FGM (Functionally Graded Material) Timoshenko beams subjected to transversely non-uniform temperature rise is presented. By accurately considering the axial extension and transverse shear deformation in the sense of theory of Timoshenko beam, geometrical nonlinear governing equations including seven basic unknown functions for functionally graded beams subjected to mechanical and thermal loads were formulated. In the analysis, it was assumed that the material properties of the beam vary continuously as a power function of the thickness coordinate. By using a shooting method, the obtained nonlinear boundary value problem was numerically solved and thermal buckling and post-buckling response of transversely non-uniformly heated FGM Timoshenko beams with fixed-fixed edges were obtained. Characteristic curves of the buckling deformation of the beam varying with thermal load and the power law index are plotted. The effects of material gradient property on the buckling deformation and critical temperature of beam were discussed in details. The results show that there exists the tension-bend coupling deformation in the uniformly heated beam because of the transversely non-uniform characteristic of materials.     

基于无网格法的Timoshenko曲梁动力分析

曲梁具有外形美观、受力性能良好的优点,故在工程中得到广泛应用。本文基于移动最小二乘近似和一阶剪切变形理论,提出一种对Timoshenko曲梁自由振动和受迫振动进行分析的无网格方法。通过一系列离散点离散曲梁,建立曲梁无网格模型,然后推导曲梁势能和动能方程,通过哈密顿原理给出曲梁自由振动和受迫振动的控制方程,因为本文方法不能直接施加边界条件,所以使用完全转换法处理本质边界条件,最后求解方程得到频率和振动模态。文末通过算例验证了本文方法的有效性,且通过收敛性分析表明本文方法具有较好的收敛性,并进一步分析了不同边界条件、跨高比和变截面变曲率对曲梁自由振动和受迫振动的影响,将计算结果与文献解或ABAQUS解进行对比分析,表明本文方法具有较高的精度,且适用于实际工程情况。     

Free vibration of functionally graded beams based on both classical and first-order shear deformation beam theories

The free vibration of functionally graded material （FGM） beams is studied based on both the classical and the first-order shear deformation beam theories. The equations of motion for the FGM beams are derived by considering the shear deforma- tion and the axial, transversal, rotational, and axial-rotational coupling inertia forces on the assumption that the material properties vary arbitrarily in the thickness direction. By using the numerical shooting method to solve the eigenvalue problem of the coupled ordinary differential equations with different boundary conditions, the natural frequen- cies of the FGM Timoshenko beams are obtained numerically. In a special case of the classical beam theory, a proportional transformation between the natural frequencies of the FGM and the reference homogenous beams is obtained by using the mathematical similarity between the mathematical formulations. This formula provides a simple and useful approach to evaluate the natural frequencies of the FGM beams without dealing with the tension-bending coupling problem. Approximately, this analogous transition can also be extended to predict the frequencies of the FGM Timoshenko beams. The numerical results obtained by the shooting method and those obtained by the analogous transformation are presented to show the effects of the material gradient, the slenderness ratio, and the boundary conditions on the natural frequencies in detail.     

Shear deformation effect in plates stiffened by parallel beams

In this paper a general solution for the analysis of shear deformable stiffened plates subjected to arbitrary loading is presented. According to the proposed model, the arbitrarily placed parallel stiffening beams of arbitrary doubly symmetric cross section are isolated from the plate by sections in the lower outer surface of the plate, taking into account the arising tractions in all directions at the fictitious interfaces. These tractions are integrated with respect to each half of the interface width resulting two interface lines, along which the loading of the beams as well as the additional loading of the plate is defined. Their unknown distribution is established by applying continuity conditions in all directions at the interfaces. The utilization of two interface lines for each beam enables the nonuniform distribution of the interface transverse shear forces and the nonuniform torsional response of the beams to be taken into account. The analysis of both the plate and the beams is accomplished on their deformed shape taking into account second-order effects. The analysis of the plate is based on Reissner’s theory, which may be considered as the standard thick plate theory with which all others are compared, while the analysis of the beams is performed employing the linearized second order theory taking into account shear deformation effect. Six boundary value problems are formulated and solved using the analog equation method (AEM), a BEM based method. The solution of the aforementioned plate and beam problems, which are nonlinearly coupled, is achieved using iterative numerical methods. The adopted model permits the evaluation of the shear forces at the interfaces in both directions, the knowledge of which is very important in the design of prefabricated ribbed plates. The effectiveness, the range of applications of the proposed method and the influence of shear deformation effect are illustrated by working out numerical examples with great practical interest.     

饱和多孔弹性Timoshenko梁的大挠度分析

基于微观不可压饱和多孔介质理论和弹性梁的大挠度变形假设,考虑梁剪切变形效应,在梁轴线不可伸长和孔隙流体仅沿轴向扩散的限定下,建立了饱和多孔弹性Timoshenko梁大挠度弯曲变形的非线性数学模型.在此基础上,利用Galerkin截断法,研究了两端可渗透简支饱和多孔Timoshenko梁在突加均布横向载荷作用下的拟静态弯曲,给出了饱和多孔 Timoshenko梁弯曲变形时固相挠度、弯矩和孔隙流体压力等效力偶等随时间的响应.比较了饱和多孔Timoshenko梁非线性大挠度和线性小挠度理论以及饱和多孔 Euler-Bernoulli梁非线性大挠度理论的结果,揭示了他们间的差异,指出当无量纲载荷参数q＞l0时,应采用饱和多孔Timoshenko梁或Euler-Bernoulli梁的大挠度数学模型进行分析,特别的,当梁长细比λ＜30时,应采用饱和多孔Timoshenko梁大挠度数学模型进行分析.     

Nonlinear forced vibration analysis of postbuckled beams

A numerical solution methodology is proposed herein to investigate the nonlinear forced vibrations of Euler–Bernoulli beams with different boundary conditions around the buckled configurations. By introducing a set of differential and integral matrix operators, the nonlinear integro-differential equation that governs the buckling of beams is discretized and then solved using the pseudo-arc-length method. The discretized governing equation of free vibration around the buckled configurations is also solved as an eigenvalue problem after imposing the boundary conditions and some complicated matrix manipulations. To study forced and nonlinear vibrations that take place around a buckled configuration, a Galerkin-based numerical method is applied to reduce the partial integro-differential equation into a time-varying ordinary differential equation of Duffing type. The Duffing equation is then discretized using time differential matrix operators, which are defined based on the derivatives of a periodic base function. Finally, for any given magnitude of axial load, the pseudo -arc-length method is used to obtain the nonlinear frequencies of buckled beams. The effects of axial load on the free vibration, nonlinear, and forced vibrations of beams in both prebuckling and postbuckling domains for the lowest three vibration modes are analyzed. This study shows that the nonlinear response of beams subjected to periodic excitation is complex in the postbuckling domain. For example, the type of boundary conditions significantly affects the nonlinear response of the postbuckled beams.     

Nonlinear Vibration Analysis of Timoshenko Beams Using the Differential Quadrature Method

This paper addresses the large-amplitude free vibration of simplysupported Timoshenko beams with immovable ends. Various nonlineareffects are taken into account in the present formulation and thegoverning differential equations are established based on theHamilton Principle. The differential quadrature method (DQM) isemployed to solve the nonlinear differential equations. Theeffects of nonlinear terms on the frequency of the Timoshenkobeams are discussed in detail. Comparison is made with otheravailable results of the Bernoulli–Euler beams and Timoshenkobeams. It is concluded that the nonlinear term of the axial forceis the dominant factor in the nonlinear vibration of Timoshenkobeams and the nonlinear shear deformation term cannot be neglectedfor short beams, especially for large-amplitude vibrations.     

Transverse free vibration of non uniform rotating Timoshenko beams with elastically clamped boundary conditions

In the present paper the Differential Quadrature Method, DQM, and the domain decomposition are used to carry out the free transverse vibration analysis of non-uniform multi-span rotating Timoshenko beams with perfect and not perfect boundary conditions. The cross section could vary in a continuous or discontinuous fashion along the beam length. The material of the beam could be different in each beam span. The influence of elastically clamped boundary conditions at hub end are studied and discussed. The effect of an arbitrary hub radius is considered. The governing differential equations of motion for rotating Timoshenko beams come from the derivation of Hamilton’s principle. The first six natural frequencies of vibration are obtained for many particular situations and for some of them the mode shapes are also available. The examples of applications of the method indicated its effectiveness. The results for particular cases are in excellent agreement with published results and results obtained by means of the finite element method.     

A new super convergent thin walled composite beam element for analysis of box beam structures

In this paper, a new composite thin wall beam element of arbitrary cross-section with open or closed contour is developed. The formulation incorporates the effect of elastic coupling, restrained warping, transverse shear deformation associated with thin walled composite structures. A first order shear deformation theory is considered with the beam deformation expressed in terms of axial, spanwise and chordwise bending, corresponding shears and twist. The formulated locking free element uses higher order interpolating polynomial obtained by solving static part of the coupled governing differential equations. The formulated element has super convergent properties as it gives the exact elemental stiffness matrix. Static and free vibration analyses are performed for various beam configuration and compared with experimental and numerical results available in current literature. Good correlation is observed in all cases with extremely small system size. The formulated element is used to study the wave propagation behavior in box beams subjected to high frequency loading such as impact. Simultaneous existence of various propagating modes are graphically captured. Here the effect of transverse shear on wave propagation characteristics in axial and transverse directions are investigated for different ply layup sequences.     

Dynamic response of axially moving Timoshenko beams: integral transform solution

The generalized integral transform technique (GITT) is used to find a semianalytical numerical solution for dynamic response of an axially moving Timoshenko beam with clamped-clamped and simply-supported boundary conditions, respectively. The implementation of GITT approach for analyzing the forced vibration equation eliminates the space variable and leads to systems of second-order ordinary differential equations (ODEs) in time. The MATHEMATICA built-in function, NDSolve, is used to numerically solve the resulting transformed ODE system. The good convergence behavior of the suggested eigenfunction expansions is demonstrated for calculating the transverse deflection and the angle of rotation of the beam cross-section. Moreover, parametric studies are performed to analyze the effects of the axially moving speed, the axial tension, and the amplitude of external distributed force on the vibration amplitude of axially moving Timoshenko beams.     

基于共旋列式的空间梁的稳定性分析

基于独立于单元的共旋列式(EICR),将一种几何线性的无剪切锁死的Timoshenko梁单元扩展用于空间梁结构的几何非线性分析。考虑到三维分析中发生大转动时转动顺序的不可交换性,也即转动自由度不能作为向量采用加法规则更新,采用了四元变量来存储和更新转动自由度,使得共旋列式适用于位移任意大和转动任意大但应变很小的几何非线性分析。同时改进了Riks弧长法使之适用于带有大转动的三维几何非线性分析。给出了几个数值算例,结果表明本文方法具有较高的计算精度和效率。