Evaluation of the dynamic-mechanical properties of solids from a cooperative model for stress relaxation

For many solid materials the stress relaxation process obeys the universal relationF = – (d/d lnt)_max = (0.1 ± 0.01) ( ₀ — _i ), regardless of the structure of the material. Here denotes the stress,t the time, ₀ the initial stress of the experiment and _i the internal stress. A cooperative model accounting for the similarity in relaxation behaviour between different materials was developed earlier. Since this model has a spectral character, the concepts of linear viscoelasticity are used here to evaluate the corresponding prediction of the dynamic mechanical properties, i.e. the frequency dependence of the storageE () and lossE () moduli. Useful numerical approximations ofE () andE () are also evaluated. It is noted that the universal relation in stress relaxation had a counterpart in the frequency dependence ofE (). The theoretical prediction of the loss factor for high-density polyethylene is compared with experimental results. The agreement is good.     

Neck propagation as a shock wave

Neck propagation in the stretching of elastic solid filaments having a yield point was analyzed using the space one-dimensional thin filament governing equations developed previously by the authors and other researchers. Constitutive model for the filament was assumed to be expressible as engineering tensile stress(X) (tensile force) given as a function of elongational strain with the(X) curve having a yield point maxima followed by a minima and a breaking point greater than the yield point maxima. Also incorporated into the model is the hysteresis of irreversible plastic deformation. When inertia is taken into consideration, the thin filament equations were found to reduce to the nonlinear wave equation ² (X)/ ² =C ₁ ² X/ ² where is Lagrangean space coordinate, is time, andC ₁ is inertia coefficient. The above nonlinear wave equation yields a solutionX(, ) having a stepwise discontinuity inX which propagates along the axis. The zero speed limit of the step wave solution was found to describe the above neck propagation occurring in solid filaments. Furthermore, it was recognized that the nonlinear wave equation was known for many years to also govern the plastic shock wave which propagates axially within a metal rod subjected to a very strong impact on its end. The one-dimensional atmospheric shock wave also was known to be governed by the nonlinear wave equation upon making certain simplifying assumptions. The above and other evidences lead to the conclusion that neck propagation occurring in the extension of solid filament obeying the above(X) function can be formally described as a shock wave.     

Response of an elastic Bingham fluid to oscillatory shear

The response of an elastic Bingham fluid to oscillatory strain has been modeled and compared with experiments on an oil-in-water emulsion. The newly developed model includes elastic solid deformation below the yield stress (or strain), and Newtonian flow above the yield stress. In sinusoidal oscillatory deformations at low strain amplitudes the stress response is sinusoidal and in phase with the strain. At large strain amplitudes, above the yield stress, the stress response is non-linear and is out of phase with strain because of the storage and release of elastic recoverable strain. In oscillatory deformation between parallel disks the non-uniform strain in the radial direction causes the location of the yield surface to move in-and-out during each oscillation. The radial location of the yield surface is calculated and the resulting torque on the stationary disk is determined. Torque waveforms are calculated for various strains and frequencies and compared to experiments on a model oil-in-water emulsion. Model parameters are evaluated independently: the elastic modulus of the emulsion is determined from data at low strains, the yield strain is determined from the phase shift between torque and strain, and the Bingham viscosity is determined from the frequency dependence of the torque at high strains. Using these parameters the torque waveforms are predicted quantitatively for all strains and frequencies. In accord with the model predictions the phase shift is found to depend on strain but to be independent of frequency.Notation A plate strain amplitude (parallel plates) - A _R plate strain amplitude at disk edge (parallel disks) - G elastic modulus - m torque (parallel disks) - M normalized torque (parallel disks) = 2m/R ³₀ - N ratio of viscous to elastic stresses (parallel plates) =µ A/ ₀ ratio of viscous to elastic stresses (parallel disks) =µ A _R/₀ - r normalized radial position (parallel disks) =r/R - r radial position (parallel disks) - R disk radius (parallel disks) - t normalized time = t — /2 - t time - _E elastic strain - _P plate strain (displacement of top plate or disk divided by distance between plates or disks) - _PR plate strain at disk edge (parallel disks) - ₀ yield strain - _E normalized elastic strain = _E/₀ - _P normalized plate strain = _P/₀ - _PR normalized plate strain at disk edge (parallel disks) = _PR/₀ - ₀ normalized plate strain amplitude (parallel plates) =A/ ₀ — normalized plate strain amplitude at disk edge (parallel disks) =A _R/₀ - phase shift between _P andT (parallel plates) — phase shift between _PR andM (parallel disks) - µ Bingham viscosity - stress - ₀ yield stress - T normalized stress =/ ₀ - frequency     

Analyse und Berechnung der Strömungsvorgänge im zylindrischen Scherspalt von Plastifizieraggregaten

Zusammenfassung Dieser Aufsatz zeigt eine Möglichkeit auf, zylindrische Scherteile einer Plastifiziereinheit, auf der strukturviskose Materialien verarbeitet werden, approximativ zu berechnen. Es ist möglich, den Volumenstrom und Druckabfall, die mittlere Schergeschwindigkeit, Scherdeformation und Schubspannung im Scherspalt zu approximieren. Durch diese Gleichungen wird eine Abschätzung der Verteil- und Zerteilvorgänge im Scherelement möglich.

---

A method is described for approximating the flow in cylindrical shearing gaps of plasticating extruder, which is applicable to shear thinning materials. It is possible to calculate the through-put and pressure drop as well as the shear rate, strain and shear stress in the gap. With these equations the distribution and separation process in shearing gaps can be evaluated.

---

D Zylinderdurchmesser - d ₁ Schnecken-Kerndurchmesser der Meteringzone - d _s Durchmesser des zylindrischen Scherteils - K Konstante im Potenzfließgesetz - K _0T Koeffizient des Potenzfließgesetzes - L ₁ Länge der Anlaufschräge - L _s Länge des zylindrischen Scherteils - n Fließindex - n ₀ Drehzahl - p Druckabfall über der Scherteillänge - s Scherspalthöhe - T _M Massetemperatur - ₀ Umfangsgeschwindigkeit - _0x Geschwindigkeitskomponente inx-Richtung - _x, _z Geschwindigkeit inx- bzw.z-Richtung als Funktion der Koordinatey - Volumenstrom - x, z Ortskoordinaten - Exponent des Potenzfließgesetzes - Schergeschwindigkeit - mittlere Schergeschwindigkeit - Viskosität - dimensionslose Höhe - Dichte der Schmelze - Schubspannung - _yx, _yz Schubspannungskomponenten - _xx, _zz Normalspannungskomponenten - _ps dimensionsloser Druckgradient - dimensionsloser Volumenstrom - _x, _z dimensionslose Geschwindigkeit inx- bzw.z-Richtung     

The rheology of powders

This paper studies the slow flow of powders. It is argued that since powders can flow like liquids, there must be equations similar to those of liquids. The phenomenon of a variable density, dilatancy, is described by an analogue of temperature called the compactivity X. Whereas, in thermal physicsT = E/S, powders are controlled byX = V/S. The equations for, v, T of a liquid are replaced by, v, X. An analogy for free energy is described, and the solution to some simple problems of packing and mixing are offered. As an example of rheology, it is shown that the simplest flow equations produce a transition to plug flow in appropriate circumstances.Delivered as a Gold Medal Lecture at the Golden Jubilee Conference of the British Society of Rheology and Third European Rheology Conference, Edinburgh, 3–7 September, 1990.     

Comparison between uniaxial and biaxial elongational flow behavior of viscoelastic fluids as predicted by differential constitutive equations

Behavior of polymer melts in biaxial as well as uniaxial elongational flow is studied based on the predictions of three constitutive models (Leonov, Giesekus, and Larson) with single relaxation mode. Transient elongational viscosities in both flows are calculated for three constitutive models, and steady-state elongational viscosities are obtained as functions of strain rates for the Giesekus and the Larson models.Change of elongational flow behavior with adjustable parameter is investigated in each model. Steady-state viscosities _E and _B are obtained for the Leonov model only when the strain-hardening parameter is smaller than the critical value _cr determined in each flow. In this model, uniaxial elongational viscosity _E increases with increasing strain rate , while biaxial elongational viscosity _B decreases with increasing biaxial strain rate _B . The Giesekus model predictions depend on the anisotropy parameter . _E and _B increase with strain rates for small _B while they decrease for large . When is 0.5, _E in increasing, but _B is decreasing. The Larson model predicts strain-softening behavior for both flows when the chain-contraction parameter > 0.5. On the other hand, when is small, the steady-state viscosities of this model show distinct maximum around = _B = 1.0 with relaxation time . The maximum is more prominent in _E than in _B .     

Rheological material functions of polymer solutions using a generalized Maxwell model with slip functions Part I: Theory

A generalization of the Maxwell model for polymer systems is derived that replaces the velocity gradient in the Eulerian expression for the upper convected derivative by a tensorial kinematic function. Applying the principle of objectivity this tensorial function is reduced to two scalar slip functions. In shear flows, only one of the two occurs. Material functions are calculated in closed form, and asymptotic conditions are formulated that guarantee isotropic behaviour of the material in sudden strains.Presented at the second conference Recent Developments in Structured Continua, May 23–25, 1990, in Sherbrooke, Québec, Canada.     

Measurements of slip at the wall during flow of high-density polyethylene through a rectangular conduit

A hot-film probe has been used to measure slip of high-density polyethylene flowing through a conduit with a rectangular cross section. A transition from no slip to a stick-slip condition has been observed and associated with irregular extrudate shape. Appreciable extrudate roughness was initiated at the same flow rate as that at which the relationship between Nusselt number and Péclet number for heat transfer from the probe departed from the behavior expected for a no-slip condition at the conduit wall. A ₁ constant defined by eq. (A3) - C dimensionless group used in eq. (7) - C _p heat capacity - D constant in eq. (13) - f u _s/u - f _lin defined by eq. (A6) - G storage modulus - G loss modulus - k thermal conductivity - L length of hot film in thex-direction - L _eff effective length of large probe found from eq. (A3) - Nu _L Nusselt number, defined for a lengthL by eq. (2) - (Nu _L)₀ value ofNu _L atPe = 0 (eq. (A 1)) - Pe Péclet number,uL/ - Pe ₀ Péclet number in slip flow, eq. (6) - Pe ₁ Péclet number in shear flow, eq. (4) - q _L average heat flux over hot film of lengthL - R _i resistances defined by figure 8 - R _AB correlation coefficient defined by eq. (14) for signalsA andB - T temperature - T _s temperature of probe surface - T ambient temperature - T T _s –T - u average velocity - u _s slip velocity - V _b voltage indicated in figure 8 - W probe dimension (figure 6) - x distance in flow direction (figure 1) - y distance perpendicular to flow direction (figure 1) - thermal diffusivity,k/C _p - wall shear rate - _5% thickness of lubricating layer during probe calibration for introduction of an error no greater than 5%; see Appendix I - ^* complex viscosity - density - time - _c critical shear stress, eq. (13) - _w wall shear stress - frequency characterizing extrudate distortion (figures 12 and 13), or frequency of oscillation during rheometric characterization (figures 18–20) - * quantity obtained from normalized Nusselt number, eq. (A1), or complex viscosity ^* - A actual (small) probe (see Appendix I) - M model (large) probe (see Appendix I)     

A model for the effect of physical ageing on the stress relaxation behavior of high density polyethylene

The stress relaxation behavior of high density polyethylene (HDPE) can be affected by ageing processes; e.g., with increasing storage time at a low temperature following a quench from a high temperature (close to the melting point) the relaxation curves change shape. More specifically, the stress level approached after very long loading times in a stress relaxation experiment increases with the ageing time. Here this stress level is denoted the internal stress _i. Struik has pointed out that physical ageing may also occur in semicrystalline polymers like HDPE. The physical ageing should then be associated with that part of the amorphous phase which is closest to the surfaces of the crystallites. This part of the amorphous phase of HDPE can be assumed to have a restricted mobility at room temperature and may have a partially glassy character. In this paper a model for explaining the increase in _i for HDPE with increasing ageing time is proposed and discussed. It is based on the separation of the amorphous phase into two parts as suggested by Struik. The glassy part of the amorphous phase ages in a way similar to that of an entirely amorphous polymer quenched to a temperature below its glass transition, while the more rubbery phase is assumed not to undergo any physical ageing.     

Peristaltic pumping of a second-order fluid in a planar channel

The peristaltic motion of a non-Newtonian fluid represented by the constitutive equation for a second-order fluid was studied for the case of a planar channel with harmonically undulating extensible walls. A perturbation series for the parameter ( half-width of channel/wave length) obtained explicit terms of 0(²), 0(²Re²) and 0(₁Re²) respectively representing curvature, inertia and the non-Newtonian character of the fluid. Numerical computations were performed and compared to the perturbation analysis in order to determine the range of validity of the terms.Presented at the second conference Recent Developments in Structured Continua, May 23–25, 1990, in Sherbrooke, Québec, Canada     

Caractéristiques rhéologiques,coéfficient de frottement et écoulement en situation réelle de fluides à seuil

Résumé Ce travail porte sur l'étude de solutions diluées d'un polymère de l'acide acrylique dans l'eau (concentration en poids 0,1%). Ce fluide présente des effets de seuil. La mesure du champ de vitesse par vélocimétrie laser permet une détermination précise de l'indice rhéologique,n, étant un paramètre essentiel de la loi de comportement proposée: . Les autres constantes peuvent être déduites d'essais rhéologiques classiques, à fort taux de cisaillement. Il est possible de corriger le gradient de pression mesuréP/L, afin d'obtenir la valeur véritable de ce gradient, notéedp/dz. L'analyse de l'écoulement dans un élargissement brusque montre que le seuil a une forte influence sur les zones de recirculation.

---

This work deals with the study of very dilute solutions of polyacrylic acid in water (weight concentration about 0.1%). These fluids seem to exhibit a yield effect. The determination of the fully developed velocity field by laser velocimetry allows us an accurate determination of the rheological indexn which is an essential parameter for the proposed rheological relationship: . Other constants can be determined from classical rheological experiments (high shear strain). It is possible to correct the experimental pressure gradientP/L so as to get the real value, noted asdp/dz. An analysis of the flow in an abrupt expansion shows that the yield effect strongly influences the recirculation zones.

---

D, d m diamètre intérieur d'une conduite cylindrique - C % concentration en poids - _s Pa seuil de contrainte - K consistance - gradient de vitesse axiale - gradient pariétal de vitesse axiale - Pa s viscosité pour - Pa contrainte de cisaillement - m/s vitesse débitante - n indice de structure - dp/dz Pa/m gradient longitudinal de pression - z m abscisse longitudinale - u m/s vitesse axiale - écart entre le gradient de pression effectif et le gradient mesuré en Pa - P Pa différence de pression mesurée - L m distance entre 2 prises de pression - A Pa constante intervenant dans l'expression de - B 10^–3 Pa s constante intervenant dans l'expression de     

Transient stress responses predicted by the internal viscosity model in elongational flow

Predictions are made for the elongational-flow transient rheological properties of the dilute-solution internal viscosity (IV) model developed earlier by Bazua and Williams. Specifically, the elongational viscosity growth function _e ⁺ (t) is presented for abrupt changes in the elongational strain rate . For calculating _e ⁺, a novel treatment of the initial rotation of chain submolecules is required; such rotation occurs in response to the macroscopic step change of at t = 0. Representative are results presented for N = 100 (N = number of submolecules) and = 1000 f and 10000 f (where is the IV coefficient and f is the bead friction coefficient), using h ^* = 0 (as in the original Rouse model) for the hydrodynamic interaction. The major role of IV is to cause the following changes relative to the Rouse model: 1) abrupt stress jump at t = 0 for _e ⁺; 2) general time-retardance of response. There is no qualitative change from the Rouse-model prediction of unbounded il growth when exceeds a critical value ( ), and calculations of submolecule strains at various show that the unbounded- _e ^– behavior arises from unlimited submolecule strains when . However, the time-retardance could delay such growth beyond the timescale of most experiments and spinning processes, so that the instability might not be detected. Finally, _e ⁺ (t) and _e ( ) in the limit are presented for N = 1 and compared with exact predictions for the analogous rigid-rod molecule; close agreement lends support for the new physical approximation introduced for solving the transient dynamics for any N.     

Temperature and concentration dependent viscosity and gelation temperature of ABA triblock copolymer solutions

In solutions of ABA-triblock copolymers in a poor solvent for A thermoreversible gelation can occur. A three-dimensional dynamic network may form and, given the polymer and the solvent, its structure will depend on temperature and polymer mass fraction. The zero-shear rate viscosity of solutions of the triblock-copolymer polystyrene-polyisoprene-polystyrene in n-tetradecane was measured as a function of temperature and polymer mass fraction, and analyzed; the polystyrene blocks contained about 100 monomers, the polyisoprene blocks about 2000 monomers. Empirically, in the viscosity at constant mass fraction plotted versus inverse temperature, two contributions could be discerned; one contribution dominating at high and the other one dominating at low temperatures. In a comparison with theory, the contribution dominating at low temperatures was identified with the Lodge transient network viscosity; some questions remain to be answered, however. An earlier proposal for defining the gelation temperature T _gel is specified for the systems considered, and leads to a gelation curve; T _gel as a function of polymer mass fraction.Mathematical symbols {} functional dependence; e.g., f{x} means f is a function of x - p _log logarithm to the base number p; e.g., ¹⁰log is the common logarithm - exp exponential function with base number e - sin trigonometric sine function - lim limit operation - – in integral sign: Cauchy Principal Value of integral, e.g., - derivative to x - partial derivative to x Latin symbols dimensionless constant - b constant with dimension of absolute temperature - constant with dimension of absolute temperature - B dimensionless constant - c mass fraction - dimensionless constant - constant with dimension of absolute temperature - d ^* dimensionless constant - D{0} constant with dimension of absolute temperature - e base number of natural (or Naperian) logarithm - g distribution function of inverse relaxation times - G relaxation strength relaxation function - h distribution function of relaxation times reaction constant enthalpy of a molecule - H Heaviside unit step function - i complex number defined by i ² = –1 - j{0} constant with dimension of viscosity - j index number - k Boltzmann's constant - k _H Huggins' coefficient - m mass of a molecule - n number - N number - p index number - s entropy of a molecule - t time - T absolute temperature Greek symbols as index: type of polymer molecule - as index: type of polymer molecule - shear as index: type of polymer molecule - shear rate - small variation; e.g. T is a small variation in T relative deviation Dirac delta distribution as index: type of polymer molecule - difference; e.g. is a difference in chemical potential - constant with dimension of absolute temperature - (complex) viscosity - constant with dimension of viscosity - [] intrinsic viscosity number - inverse of relaxation time - chemical potential - number pi; circle circumference divided by its diameter - mass per unit volume - relaxation time shear stress - angular frequency     

Rheological properties of skim milk gels at various temperatures; interrelation between the dynamic moduli and the relaxation modulus

The rheological properties of rennet-induced skim milk gels were determined by two methods, i.e., via stress relaxation and dynamic tests. The stress relaxation modulusG _c (t) was calculated from the dynamic moduliG andG by using a simple approximation formula and by means of a more complex procedure, via calculation of the relaxation spectrum. Either calculation method gave the same results forG _c (t). The magnitude of the relaxation modulus obtained from the stress relaxation experiments was 10% to 20% lower than that calculated from the dynamic tests.Rennet-induced skim milk gels did not show an equilibrium modulus. An increase in temperature in the range from 20° to 35 °C resulted in lower moduli at a given time scale and faster relaxation. Dynamic measurements were also performed on acid-induced skim milk gels at various temperatures andG _c (t) was calculated. The moduli of the acid-induced gels were higher than those of the rennet-induced gels and a kind of permanent network seemed to exist, also at higher temperatures. G storage shear modulus,N·m^–2; - G loss shear modulus,N·m^–2; - G _c calculated storage shear modulus,N·m^–2; - G _c calculated loss shear modulus,N·m^–2; - G _e equilibrium shear modulus,N·m^–2; - G _ec calculated equilibrium shear modulus,N·m^–2; - G(t) relaxation shear modulus,N·m^–2; - G _c (t) calculated relaxation shear modulus,N·m^–2; - G ^*(t) pseudo relaxation shear modulus,N·m^–2; - H relaxation spectrum,N·m^–2; - t time,s; - relaxation time,s; - angular frequency, rad·s^–1. Partly presented at the Conference on Rheology of Food, Pharmaceutical and Biological Materials, Warwick, UK, September 13–15, 1989 [33].     

Fractal-time stochastic processes and dynamic functions of polymeric systems

Dynamic material functions of polymeric systems are calculated via a defect-diffusion model. The random motion of defects is modelled by a fractaltime stochastic process. It is shown that the dynamic functions of polymeric solutions can be approximated by the defect-diffusion process of the mixed type. The relaxation modulus of Kohlrausch type is obtained for a fractal-time defect-diffusion process, and it is shown that this modulus is capable of portraying the dynamic behavior of typical viscoelastic solutions.The Fourier transforms of the Kohlrausch function are calculated to obtain and. A three-parameter model for and is compared with the previous calculations. Experimental measurements for five polymer solutions are compared with model predictions. D rate of deformation tensor - G(t) mechanical relaxation modulus - H relaxation spectrum - I(t) flux of defects - P _n (s) probability of finding a walker ats aftern-steps - P generating function ofP _n (s) - s(t) fraction of surviving defects - , () gamma function (incomplete) - ₀ zero shear viscosity - ^* () complex viscosity - frequency - t _n n-th moment - F[] Fourier transform - f ^* (u) Laplace transform off(t) - , components of ^* - G _f, _f ^* fractional model - G ₃, ₃ ^* three parameter model - complex conjugate ofz - material time derivative ofD     

On the relationship between swelling of myofibrils and their suspension rheology

The swelling of myofibrils extracted from white bovine muscle was followed by measuring their suspension rheology. Swelling of the myofibril with increasing pH and ionic strength was accompanied by an increase in both the steady shear viscosity of the suspension and the dynamic viscoelastic properties. Swelling was continuously monitored by measuringG while the ionic strength of the suspension was being changed by dialysis. The relationship between the degree of swelling and the rheological parameters is complicated because myofibrils are rodshaped and swell radially and therefore swelling results in a change in shape. To allow for this an attempt was made to generalize the data by plotting viscosity andG againstcS/ø _m , wherec is the protein concentration in the suspension,S is the swollen volume of the myofibrils per weight of protein, and ø _m is the maximum packing fraction.The best fit to the data was represented by the equations _sp = 1.05 (cS/ _m – 0.84)^1.23 Pa · sG = 8.78 (cS/ _m – 0.67)^2.22 N m^–2. The scatter was greatest forG, possibly because at low degrees of shear the myofibrils were associated and this was confirmed by optical microscopy. Pronounced non-Newtonian behavior was observed and it was suggested that this was due to the disruption of aggregate structures, although at low concentration, orientation of the rods in the shear field may also be important.     

Apparent thickening behavior of dilute polystyrene solutions in extensional flows

An experimental investigation was undertaken to study the apparent thickening behavior of dilute polystyrene solutions in extensional flow. Among the parameters investigated were molecular weight, molecular weight distribution, concentration, thermodynamic solvent quality, and solvent viscosity. Apparent relative viscosity was measured as a function of wall shear rate for solutions flowing from a reservoir through a 0.1 mm I.D. tube. As increased, slight shear thinning behavior was observed up until a critical wall shear rate was exceeded, whereupon either a large increase in or small-scale thickening was observed depending on the particular solution under study. As molecular weight or concentration increased, decreased and, the jump in above , increased. increased as thermodynamic solvent quality improved. These results have been interpreted in terms of the polymer chains undergoing a coil-stretch transition at . The observation of a drop-off in at high (above ) was shown to be associated with inertial effects and not with chain fracture due to high extensional rates.     

Representation of the rheological properties of polymer melts in terms of complex fluidity

In dynamic rheological experiments melt behavior is usually expressed in terms of complex viscosity ^* () or complex modulusG ^* (). In contrast, we attempted to use the complex fluidity ^* () = 1/µ ^* () to represent this behavior. The main interest is to simplify the complex-plane diagram and to simplify the determination of fundamental parameters such as the Newtonian viscosity or the parameter of relaxation-time distribution when a Cole-Cole type distribution can be applied. ^* () complex shear viscosity - () real part of the complex viscosity - () imaginary part of the complex viscosity - G ^* () complex shear modulus - G() storage modulus in shear - G() loss modulus in shear - J ^* () complex shear compliance - J() storage compliance in shear - J() loss compliance in shear - shear strain - rate of strain - angular frequency (rad/s) - shear stress - loss angle - ^* () complex shear fluidity - () real part of the complex fluidity - () imaginary part of the complex fluidity - ₀ zero-viscosity - ₀ average relaxation time - h parameter of relaxation-time distribution     

Generalized characteristic of polymer blend melt viscosity

A very simple reduction procedure is suggested for the blend viscosities of different polymer pairs. This procedure is based on the comparison of the blend viscosity, normalized either to the matrix or to the disperse phase viscosity, with the viscosities ratio of the initial polymers ( _m / _d ). We have obtained, for 13 different pairs containing 30% of the second component, the universal linear dependencies, mutual analysis of which allows connection of their special points with the stream morphology. The fibrillous morphology takes place in the range of _m / _d = 0, 1–5. Simultaneous, the thin skin consisting of the disperse phase polymers is formed. These results confirm the predominant role of the viscosities ratio in fibrillar composite material formation in comparison with the interphase tension phenomena.     

An experimental study on effects of solid concentration and ζ-potential on pseudoplastic flow of suspensions

The pseudoplastic flow of suspensions, alumina or styrene-acrylamide copolymer particles in water or an aqueous solution of glycerin has been studied by the step-shear-rate method. The relation between the shear rate,D, and the shear stress,, in the step-shear-rate measurements, where the state of dispersion was considered to be constant, was expressed as = AD ^1/2 +CD. The effective solid volume fraction,ø _F, andA were dependent on the shear rate and expressed byø _F =aD ^b andA = D . Combining the above relations, the steady flow curve was expressed by = D ^{1/2 +} + ₀ (1 – a D ^b/0.74)^–1.85 D, where ₀ is the viscosity of the medium.With an increase in solid volume fraction and a decreases in the absolute value of the-potential, the flow behavior of the suspensions changed from Newtonian ( = = b = 0), slightly pseudoplastic ( = b = 0), pseudoplastic ( = 0) to a Bingham-like behavior.The change in viscosity of the medium had an effect on the change in the effective volume fraction.