汽车薄钢板应力应变曲线及屈服轨迹的研究

采用十字形双向拉伸的实验方法对两种汽车用薄钢板BH220和SPEN进行了不同 加载路径下的双向拉伸试验，得到了不同应力状态下的应力应变关系曲线，同时，根据单位 体积塑性功相等的原则，确定了两种钢板等效塑性应变从0.2\%$\sim$2\%的实验屈服轨迹. 结果分析表明：不同加载路径下板料的应力应变关系不同，随着加载比例由单拉到等双拉状 态，板料的硬化指数逐步增大；实验屈服轨迹呈外凸性，且以等双拉为界的上下部分屈服轨 迹不对称，随着变形程度的增加，屈服轨迹向外扩大，但单拉时强化程度最小，而等双拉 时最大. 对BH220和SPEN钢板的实验屈服轨迹与几种常用理论屈服轨迹的比较发现，Hosford各向 异性屈服准则的理论轨迹与实验结果最为接近，Hill48准则与实验结果相差最大，此外一 向被视为只适用于各向同性材料的Mises准则与实验结果也较为接近，其他几个屈服准则的 理论屈服轨迹与实验点相差较大.     

准脆性材料的弹塑性各向异性损伤耦合本构模型研究

针对准脆性材料的非线性特征：强度软化和刚度退化、单边效应、侧限强化和拉压软化、不可恢复变形、剪胀及非弹性体胀,在热动力学框架内,建立了准脆性材料的弹塑性与各向异性损伤耦合的本构关系。对准脆性材料的变形机理和损伤诱发的各向异性进行了诠释,并给出了损伤构形和有效构形中各物理量之间的关系。在有效应力空间内,建立了塑性屈服准则、拉压不同的塑性随动强化法则和各向同性强化法则。在损伤构形中,采用应变能释放率,建立了拉压损伤准则、拉压不同的损伤随动强化法则和各向同性强化法则。基于塑性屈服准则和损伤准则,构建了塑性势泛函和损伤势泛函,并由正交性法则,给出了塑性和损伤强化效应内变量的演化规律,同时,联立塑性屈服面和损伤加载面,给出了塑性流动和损伤演化内变量的演化法则。将损伤力学和塑性力学结合起来,建立了应变驱动的应力-应变增量本构关系,给出了本构数值积分的要点。以单轴加载-卸载往复试验识别和校准了本构材料常数,并对单轴单调试验、单轴加载-卸载往复试验、二轴受压、二轴拉压试验和三轴受压试验进行了预测,并与试验结果作了比较,结果表明,所建本构模型对准脆性材料的非线性材料性能有良好的预测能力。     

屈服准则及切线模量修正的弹塑性计算模型

为提高不同应力状态下金属弹塑性行为的模拟精度,采用含应力三轴度修正的von Mises屈服准则,材料弹塑性本构关系在等效应力$\!$-$\!$-$\!$等效应变曲线基础上,提出一个切线模量为主应力函数的理论修正项. 将这两个修正项结合,以子程序形式编程嵌入ABAQUS主程序,以此模拟几种不同形状试样的弹塑性行为,并将其他屈服准则在单一曲线假设下编程与之对比. 模拟结果与真实试验结果对比发现,对于屈服而言,含应力三轴度修正的vonMises屈服准则比其他屈服理论准确;对于弹塑性阶段计算而言,提出的切线模量为主应力函数这一假设比单一曲线假设更加接近真实试验.      

The constitutive equations for mixed hardening orthotropic material

IntroductionAyieldingcriterionandtheassociatedflowtheorywereproposedbyHill[1]forinitiallyorthotropicmetalsin 1 948,whichareusedbroadly .AquadraticformofstressesisusedastheplasticpotentialthatisindependentofhydrostaticstressinHillplasticitytheory .Butcompressedbyhydrostaticstress,considerabledeformationwillbeproducedinorthotropicmaterials.Inthecaseofcyclicloading ,duetoBauschingereffect,thekinematichardeningcannotbeneglected .Inthispaper,kinematichardeningandproportionalhardeningareconsidered…     

强度理论百年总结

自从1900年著名的Mohr-Coulomb强度理论建立以来,已有100年的历史.在20世纪,关于材料在复杂应力状态下的强度理论进行了大量的理论研究和实验研究工作.本文对材料(包括金属材料、岩石、土、混凝土、冰、铁、聚合物、含能材料等)在复杂应力状态下强度理论(屈服准则、破坏准则等)的百年发展进行了总结,讨论了各种准则之间的关系,为研究和工程应用中的合理选择破坏准则提供了一种方法.文中还总结了三大系列强度理论、统一屈服准则、统一强度理论和其他各种强度理论,并简述了强度理论的计算机实施,以及多轴疲劳等问题.     

A generating function for the yield criterion of isotropic and anisotropic polycrystalline materials

Summary A yield criterion for elastic pure-plastic polycrystalline materials is generated under simplified conditions by assuming that for yielding a certain fraction Q _c of the total number of slip planes in the material has to be active. This fraction Q _c is called the critical active quantity. We suppose Q _c to be independent of the state of stress. The yield criterion is mathematically expressed as an integral, which is a function of Q _c. This criterion can also be used for anisotropic materials.For isotropic materials the ratio (r) of the yield stress in torsion to that in tension is calculated as a function of Q _c. We find 0.5r0.61.The value r=0.5 (Tresca's criterion) is obtained for Q _c=0 and Q _c=1. The value r=0.577 (von Mises criterion) is obtained for Q _c=0.34 and Q _c=0.79. The difference between two criteria with the same r is the magnitude of the yield stress. We think the value Q _c=0.79 corresponds to the experiments for f.c.c. materials, since a rough estimation gives Q _c>0.75 for yielding.The independence of Q _c on the state of stress brings on that r>0.5 is more probable. This is caused by the slower increase to Q _c in torsion compared with the case of tension.From the theory follows that in the general case (Q _c0) the middle principal stress has influence on yielding.In this paper we don't determine Q _c, but adapt its value to the experimental results. However, a rough estimation of Q _c is given for isotropic materials.     

一种非线性强度准则及转换应力法

岩土材料在二维破坏模式下具有较强烈的曲线形态,在一般剪应力与正应力空间中提出用幂参数曲线来表达上述曲线,该曲线与摩尔圆的外切点即对应为破坏应力点,则利用该点的外切直线斜率的反正切值来得到有效滑移角.对于三维单元体,共存在三个有效滑移角,利用三个有效滑移角确定出空间有效滑移面.基于岩土材料为摩擦型材料这一基本特性,利用空间有效滑移面上的应力比为一定值作为衡量材料破坏与否的判断准则,基于上述思路推导得到了t强度准则,在偏平面上,t准则开口形状为介于Von-Mises圆形曲线到SMP曲边三角形形态.在子午面上,引入开口的幂函数作为反映静水压力效应以及剪切破坏的曲线,而闭口的水滴型屈服面函数作为反映体积压缩屈服曲线,反映了岩土材料的压剪耦合特性.基于所提出的t强度准则, 推导了变换应力公式,可将以$p,q$为应力量的二维模型简单方便的转换为三维应力状态本构模型.通过强度以及多种应力路径的测试对比,验证了所提t准则及基于该准则的变换应力公式的合理性.      

Analytical Solutions to Expansion of Cylindrical Cavity in Linear Softening Soil

Based on the results of conventional triaxial compression tests for a soil, a trilinear elasto-plastic model is proposed to simulate the stress-strain softening curve. According to this curve, the constitutive relation between the bulk strain and two pr…     

基于t准则的各向异性强度准则及变换应力法

岩土材料通常呈现出成层水平分布特点, 即可将其视为横观各向同性材料, 横观各向同性对于岩土材料的变形以及强度值都会产生显著的影响. 基于已提出的t强度准则, t强度准则是基于各向同性单元体中存在有效滑移面来构建的, 并根据该空间有效滑移面上主剪应力与主法向应力的比值达到一定阈值为破坏条件. 在空间中存在有效滑移面与物理沉积面, 基于上述两个面在空间的位置关系, 用两面夹角作为表征横观各向同性对剪切强度影响程度的参量, 并假定当该夹角值越大, 则各向异性对强度贡献程度越大, 对应更大的应力比强度值, 反之, 则对应更小的应力比强度值. 基于上述思路并类比将其推广为正交三维各向异性准则, 基于三维各向异性材料的三维沉积面, 提出了三维特征沉积面的概念, 并基于空间滑移面与三维特征沉积面之间的夹角作为度量各向异性程度的变量, 提出了基于两面角作为参量考虑原生各向异性的应力比强度公式, 并利用该应力比强度公式来修正已提出的t强度准则, 最终建立了考虑各向异性影响的t准则公式. 在上述准则基础上, 考虑将各向异性应力空间转换为各向同性应力空间的思路, 在各向异性t准则基础上, 推导得到了基于各向异性强度t准则的变换应力公式, 利用变换应力公式可以将传统的以p, q为变量的各向同性本构模型转变为可考虑各向异性的三维本构模型. 通过对岩土材料的强度以及真三轴条件下的应力应变关系试验数据预测, 验证了所提的各向异性t准则及其变换应力公式的有效性及适用性.      

EFFECT OF SPECIMEN ASPECT RATIO ON FATIGUE LIFE OF CLOSED CELL Al-Si-Ca ALLOY FOAM

Quasi-static and compressive fatigue tests on the closed cell Al-Si-Ca alloy foam specimens with three different aspect ratios were performed. It turned out that the onset of cyclic shortening of foam with a lower aspect ratio took place earlier and the fatigue strength was lower compared with the specimen with a higher aspect ratio, although all the dimensions of specimen satisfied the seven times the cell size criterion, while the quasi-static stress-strain curves were almost same having same Young＇s modulus, yield stress and plateau stress. Therefore, the seven times the cell size criterion for the quasi-static compression behavior was not applicable to the fatigue analysis of Al-Si-Ca alloy foam.     

Prediction of mixed-mode fracture based on an elasto–plastic energy balance criterion

The maximum energy release rate criterion, i.e., G _max criterion, is commonly used for crack propagation analysis. This fracture criterion is based on the elastic macroscopic strength of materials. In the present investigation, however, the G _max criterion has been modified in order to accommodate the consideration of plastic strain energy. This modified criterion is extended to study the fatigue crack growth characteristics of mixed-mode cracks. To predict crack propagation due to fatigue loads, a new elasto–plastic energy model is presented. This new model includes the effects of material properties such as strain hardening exponent n, yield strength σ _y , and fracture toughness and stress intensity factor ranges. The results obtained are compared with those obtained using the commonly employed crack growth law and the experimental data.     

ANISOTROPIC STRENGTH CRITERION BASED ON T CRITERION AND THE TRANSFORMATION STRESS METHOD 1)

岩土材料通常呈现出成层水平分布特点, 即可将其视为横观各向同性材料, 横观各向同性对于岩土材料的变形以及强度值都会产生显著的影响. 基于已提出的t强度准则, t强度准则是基于各向同性单元体中存在有效滑移面来构建的, 并根据该空间有效滑移面上主剪应力与主法向应力的比值达到一定阈值为破坏条件. 在空间中存在有效滑移面与物理沉积面, 基于上述两个面在空间的位置关系, 用两面夹角作为表征横观各向同性对剪切强度影响程度的参量, 并假定当该夹角值越大, 则各向异性对强度贡献程度越大, 对应更大的应力比强度值, 反之, 则对应更小的应力比强度值. 基于上述思路并类比将其推广为正交三维各向异性准则, 基于三维各向异性材料的三维沉积面, 提出了三维特征沉积面的概念, 并基于空间滑移面与三维特征沉积面之间的夹角作为度量各向异性程度的变量, 提出了基于两面角作为参量考虑原生各向异性的应力比强度公式, 并利用该应力比强度公式来修正已提出的t强度准则, 最终建立了考虑各向异性影响的t准则公式. 在上述准则基础上, 考虑将各向异性应力空间转换为各向同性应力空间的思路, 在各向异性t准则基础上, 推导得到了基于各向异性强度t准则的变换应力公式, 利用变换应力公式可以将传统的以p, q为变量的各向同性本构模型转变为可考虑各向异性的三维本构模型. 通过对岩土材料的强度以及真三轴条件下的应力应变关系试验数据预测, 验证了所提的各向异性t准则及其变换应力公式的有效性及适用性.     

一种适用于岩土的扩展强度及屈服准则

土壤材料是一种典型的摩擦型材料,然而天然岩石却具有一定的凝聚力,而金属材料则完全是凝聚型材料. 在分析三种典型的材料强度准则表达式基础上,即SMP,Lade-Duncan以及广义Von-Mises准则,通过利用应力张量的不变量表达形式,提出了一种扩展准则即VML准则,该准则能够分别退化为上述3种典型准则. 在偏平面上,新准则能够描述从曲边三角形到圆形在内的多种开口形态;在子午面上,采用幂函数作为破坏准则公式,能够描述静水压力对于强度特性影响的非线性性质. 而对于土壤的屈服性质,岩土材料具有典型的压剪耦合特性,因此,为了描述剪切与等方向压缩两种路径下的体积耦合现象,采用水滴型屈服面作为屈服准则. 对于偏平面上的截面形状,讨论了给定球应力下偏应力强度值的分布形式及特点,讨论了应力罗德角对于偏平面上强度曲线的凹凸性的影响. 最后,通过多种材料的破坏与屈服试验成果,用所提新准则进行了验证. 通过强度以及屈服特性测试对比,验证了所提VML准则的合理性.      

基于微面有效应力矢量的各向异性屈服准则

基于微面模型，定义损伤变量为微面上有效承载面积的减少. 将Kachanov的一维有效 应力概念推广到三维，提出微面有效应力矢量的概念. 根据微面的有效应力矢量，将无损材 料的宏观应力张量及不变量与微面应力矢量的积分关系拓展到有损材料，得到了有损材料的 宏观有效应力张量及其不变量与宏观名义应力张量、微面面积损伤组构张量之间的关系. 将 无损材料的以应力张量不变量表示的Drucker-Prager准则推广到有损材料，建立了含缺陷 材料的各向异性屈服准则. 对有损材料，宏观有效应力张量与Murakami的有效应力张量具 有相同的形式，各向异性强度准则与Liu等提出的扩展Hill准则有相同的形式，当不考虑 静水应力对屈服的影响时，它与Hill准则具有相同的形式.     

The effect of residual stresses on hardness measurements

The RockwellC hardness,RC, was measured as a function of position on steel rings with different residual-stress profiles through the thickness. An experimental correlation between residual stress andRC was obtained. A relationship between the average pressurep of a spherical indenter, the yield strengthS _y and the residual stress of the material was conceived and used in fitting the experimental data. In order to model the effects of residual stresses on the measured hardness, the von Mises-Hencky (power) yield criterion was utilized, together with an adaptation for residual stresses of the expression for the stress state under a spherical indenter, given in Shaw, Hoshi and Henry. A parameter α was introduced in our calculations to account for the effect of the nonperpendicularity of the residual stresses to the pressurep of the spherical indenter. The proposed model in large measure fits experimental hardness versus residual stress data, and results are consistent with different samples. This model can be used as a basis for the measurement of residual stresses in steel or other materials.     

复杂加载下混凝土的弹塑性本构模型

混凝土材料在不同应力路径下或复杂加载条件下会表现出差异性显著的应力应变关系,在小幅循环加载条件下,其应力应变关系会表现出类似于弹性变形的滞回曲线.在不同应力水平下,混凝土的应力应变关系以及破坏特性都具有静水压力相关特点,即随着静水压力增大,各向异性强度特性弱化.此外,混凝土受压及受拉破坏机理不同,因而对应于混凝土硬化损伤亦有不同,即可分为受压硬化损伤,受拉硬化损伤及两者的混合硬化损伤类型.基于Hsieh模型,对该模型进行了三点改进.（1）针对小幅循环加载下混凝土无塑性变形的试验规律,而模型中在应力水平较低的循环加载条件下始终存在塑性变形的预测问题,采用在边界面模型框架下,设置了应力空间的弹性域,初始屈服面与后续临界状态屈服面几何相似的假定.（2）基于广义非线性强度准则将原模型采用变换应力方法将其推广为三维弹塑性本构模型,采用变换后模型可合理的考虑不同应力路径对于子午面以及偏平面上静水压力效应形成的影响,并避免了边界面应力点奇异问题.（3）分别对拉压两种加载损伤模式建议了相应的硬化参数表达式,可分别用于描述上述加载中产生的应变软化及强度退化行为.基于多种加载路径模拟表明:所建立的三维弹塑性本构模型可合理地用于描述混凝土的一般应力应变关系特性.      

An admissible form of an inelastic constitutive equation—II. Examples of elastoplastic constitutive equation

Some examples of elastoplastic constitutive equation are presented using the general theory reported in the preceding paper (Part I). Some examinations of them are given to show that the theory is self-consistent and useful especially for anisotropic materials or materials with anisotropy resulting from plastic deformation. Mises' and Yoshimura's yield functions and a kind of quadratic function are adopted as the yield function. Formulae of r-value after arbitrary pre-straining are given which are of paramount importance in the field of press-forming of sheet metals. Several examples of stress-strain curves for various loading paths are also given.     

Thermo-mechanical measurement of elasto-plastic transitions during cyclic loading

The surface temperature of stainless steel SS304 low cycle fatigue specimens subjected to cyclic loading was studied using infrared thermography technique. The thermal data mapped onto the various stages of cyclic stress-strain curve shows the ability of these measurements to identify the yield points in both the compression and tension loading. Based on the results of this study, it is possible to identify the state of stress for materials such as elastic tension, plastic tension, elastic compression, plastic compression during cyclic loading using infrared thermographic data. The thermo-elastic slope and thermo-plastic slope was observed to be dependent on the prior loading cycles.     

预应变对中子辐照高纯铝拉伸性能的影响

金属材料的中子辐照硬化和脆化一直都是核能安全领域十分关注的重要问题之一. 为了进一步认识预应变对中子辐照金属材料塑性形变和最终断裂特性的影响规律, 及其微观机理, 本文研究了10%拉伸预应变高纯铝的拉伸应力-应变曲线、失稳应力和失稳应变等随辐照剂量的变化规律. 结果表明, 辐照剂量越高, 预应变高纯铝内部孔洞的尺寸和数密度越高, 导致屈服强度和极限拉伸强度越高, 均匀延伸率和失稳应变越小, 表现出典型的辐照硬化和脆化效应, 但失稳应力与辐照剂量几乎无关. 相同辐照剂量条件下, 预应变引入的高密度位错能够显著降低辐照孔洞的尺寸和数密度, 加之辐照退火效应的综合影响, 导致预应变能够降低高纯铝屈服强度的增长率和失稳应变的下降率, 从而表现出一定的抑制辐照硬化和脆化的能力, 预应变还能够提高高纯铝的失稳应力, 但整体而言预应变并不能提高高纯铝的延性. 最后, 基于J-C本构模型的中子辐照退火态金属材料的脆化模型能够直接应用于预应变金属材料, 且模型预测结果与实验结果吻合较好.      

Mechanical behavior of metals under tension- compression loading at high strain rate

By using a new technique based on a split Hopkinson pressure bar method, a sequenced reverse test (quasi-static tensile prestress, followed by dynamic compression and then followed by dynamic tension) at high strain rate was performed and tension-compression stress-strain relations were derived by using one-dimensional stress wave analysis. Three materials, 2017 aluminium alloy, 0.45% carbon steel, and pure aluminium, were investigated at low and high strain rates, and the strain rate effect on the reverse loading stress-strain curves was compared to that on the loading stress-strain curves. It was found that reduction of yield stress is always associated with load reversals, and the strain rate effect on the reverse loading (tension) is almost the same as that during loading (compression) at higher values of reverse deformation.