Moving eccentric crack in a piezoelectric strip bonded to elastic materials

Summary  The steady-state of a propagation eccentric crack in a piezoelectric ceramic strip bonded between two elastic materials under combined anti-plane mechanical shear and in-plane electrical loadings is considered in this paper. The analysis based on the integral transform approach is conducted on the permeable crack condition. Field intensity factors and energy release rate are obtained in terms of a Fredholm integral equation of the second kind. It is shown for this geometry that the crack propagation speed has influence on the dynamic energy release rate. The initial crack branching angle for a PZT-5H piezoceramic structure is predicted by the maximum energy release rate criterion. Received 23 January 2001; accepted for publication 18 October 2001     

Transient response of a rectangular piezoelectric medium with a center crack

The dynamic field intensity factors and energy release rates in a rectangular piezoelectric ceramic medium containing a center crack are obtained for boundary conditions of a permeable and an impermeable crack under electro-mechanical impact loading. An integral transform method is used to reduce the problem to two pairs of dual integral equations, which are then expressed as Fredholm integral equations of the second kind. Numerical values on the dynamic energy release rate are obtained to show the dependences upon the geometry and electric field.     

Transient response of an insulating crack between dissimilar piezoelectric layers under mechanical and electrical impacts

Summary  The dynamic response of an interface crack between two dissimilar piezoelectric layers subjected to mechanical and electrical impacts is investigated under the boundary condition of electrical insulation on the crack surface by using the integral transform and the Cauchy singular integral equation methods. The dynamic stress intensity factors, the dynamic electrical displacement intensity factor, and the dynamic energy release rate (DERR) are determined. The numerical calculation of the mode-I plane problem indicates that the DERR is more liable to be the token of the crack growth when an electrical load is applied. The dynamic response shows a significant dependence on the loading mode, the material combination parameters as well as the crack configuration. Under a given loading mode and a specified crack configuration, the DERR of an interface crack between piezoelectric media may be decreased or increased by adjusting the material combination parameters. It is also found that the intrinsic mechanical-electrical coupling plays a more significant role in the dynamic fracture response of in-plane problems than that in anti-plane problems. Received 4 September 2001; accepted for publication 23 July 2002 The work was supported by the National Natural Science Foundation under Grant Number 19891180, the Fundamental Research Foundation of Tsinghua University, and the Education Ministry of China.     

Impact response of a piezoelectric layered composite plate with a crack

The dynamic response of a central crack in a piezoelectric layered composite plate under normal impact is analyzed. The crack is oriented normally to the interfaces. The Laplace and Fourier transform techniques are used to formulate the problem in terms of a singular integral equation. The order of stress singularity around the tip of the terminated crack is also obtained. Numerical calculations are carried out, and the main results presented are the variations of the dynamic stress intensity factor and the dynamic energy density factor versus time as functions of the geometric parameters and the piezoelectric material properties of the layered composite plate.     

Electroelastic Analysis of an Internal Interface Crack in a Half-Plane Consisting of Two Bonded Dissimilar Piezoelectric Quarter-Planes

The problem of an interface crack in a half-plane consisting of two bonded dissimilar piezoelectric quarters is considered under antiplane shear and inplane electric loading. The problem is solved under the electrically permeable assumption for a crack. The integral transform technique is employed to reduce the problem to triple integral equations, which is further converted to a hypersingular integral equation for the crack sliding displacement. By solving the resulting equation analytically, the electroelastic field along the interface and the energy release rate are obtained in explicit form, respectively. Several examples are given to illustrate the influence of the material properties and the crack position on the energy release rate.     

Dynamic fracture behavior of a cracked piezoelectric half space under anti-plane mechanical and in-plane electric impact

Summary  The dynamic response of a cracked piezoelectric half-space under anti-plane mechanical and in-plane electric impacting loads is investigated in the present paper. In the study, the crack is assumed parallel to the free surface of the half-space. Laplace and Fourier transforms are used to reduce the mixed boundary value problems to Cauchy-type singular integral equations in the Laplace transform domain, which are solved numerically. Then, a numerical Laplace inversion is performed and the dynamic stress and electric displacement factors are obtained as functions of time and geometry parameters. The dynamic energy release rate is derived for piezoelectric materials in terms of the electroelastic intensities and is displayed graphically. Received 5 January 2000; accepted for publication 28 June 2000     

Fracture of piezoelectromagnetic materials

The crack problem in a medium possessing coupled piezoelectric, piezomagnetic and magnetoelectric effects is considered. A conservative integral is derived based on the governing equations for magnetoelectroelastic media. Closed-form solution is obtained for an anti-plane crack in an infinite medium. The conservative integral is used to obtain the path-independent integral near the crack tip. Expressions for stresses, electric displacements and magnetic inductions in the vicinity of a crack tip are derived. It is found that the path-independent integral around the crack tip equals the energy release rate. In the absence of applied mechanical loads, the energy release rate is always negative.     

Crack driving force and energy-momentum tensor in electroelastodynamic fracture

The energy flux integral and the energy-momentum tensor for studying the crack driving force in electroelastodynamic fracture are formulated within the framework of the nonlinear theory of coupled electric, thermal and mechanical fields based on fundamental principles of thermodynamics. This formulation lays a foundation for in-depth understanding of the fracture behavior of piezoelectric materials. Remarkably, the dynamic energy release rate thus obtained has an odd dependence on the electric displacement intensity factor for steady-state propagation of a conventional (unelectroded) crack with exact, electrically permeable, semi-permeable, or impermeable crack surface condition, which is in agreement with experimental evidence.     

Time-harmonic P-waves engulfing a rectangular limited-permeable crack in piezoelectric medium: Energy density and energy release

The dynamic behavior of a limited-permeable rectangular crack in a transversely isotropic piezoelectric material is impinged by to a P-wave. The generalized Almansi theorem and the Schmidt method are used to determine the stress intensity factor and energy density factor as the primary fracture criterion of failure. The mixed boundary value problem entails the evaluation of the appropriate crack edge stress singularities that are characteristics of the fundamental functions. The stress and electric displacement intensity factors are also used to find the energy release rate that can be computed numerically and compared with the results corresponding to those of the stress intensity factor, and energy density factor. Graphical presentation shows that the energy release rate is always negative for the boundary conditions considered while the energy density factors always remain positive. Under certain conditions, the stress and electric displacement intensity factors can be negative and subject to physical limitations. Piezoelectric material boundary value problem solutions should therefore be qualified by the application of failure criteria by fracture of otherwise, particularly when the mechanical and electrical energy can release by creating free surface at the macroscopic and microscopic scales. Negative energy release rate found for the piezoelectric medium in this work can be a case in point.Positive definiteness of the energy density factor can be applied to mutliscale fracture. This is not true for the stress intensity factor nor the energy release rate. Hence, crack initiation behavior for the permittivity of a rectangular crack due to the wave propagation effects may be studied. In particular, the initiation of micro-cracks may be identified with certain critical stress wave frequency band. Negative stress intensity factor may not enhance macrocracking but it does not exclude microcrack initiation.     

Transient response of a piezoelectric ceramic strip with an eccentric crack under electromechanical impacts

The transient response of a piezoelectric strip with an eccentric crack normal to the strip boundaries under applied electromechanical impacts is considered. By using the Laplace transform, the mixed initial-boundary-value problem is reduced to triple series equations, then to a singular integral equation of the first kind by introducing an auxiliary function. The Lobatto–Chebyshev collocation technique is adopted to solve numerically the resulting singular integral equation. Dynamic field intensity factors and energy release rate are obtained for both a permeable crack and an impermeable crack. The effects of the crack position and the material properties on the dynamic stress intensity factor are examined and numerical results are presented graphically.     

Impact response of a functionally graded piezoelectric plate with a vertical crack

The dynamic fracture problem for a functionally graded piezoelectric plate containing a crack perpendicular to the free boundaries is considered in this study. It is assumed that the electroelastic properties of the medium vary continuously in the thickness direction. Integral transform techniques and dislocation density function are employed to reduce the problem to the solution of a singular integral equation. Mode I dynamic energy density factors are presented for an internal crack as well as an edge crack for various values of dimensionless parameters representing the size and location of the crack and the material nonhomogeneity.     

TRANSIENT RESPONSE OF COPLANAR INTERFACIAL CRACKS BETWEEN TWO DISSIMILAR PIEZOELECTRIC STRIPS UNDER ANTI-PLANE MECHANICAL AND IN-PLANE ELECTRICAL IMPACTS

The dynamic response of multiple coplanar interface cracks between two dissimilar piezoelectric strips subjected to mechanical and electrical impacts is investigated. Solutions to two kinds of electric boundary conditions on crack surfaces, i.e. electric impermeable and electric permeable, are obtained. Laplace and Fourier transforms and dislocation density functions are employed to reduce the mixed boundary value problem to Cauchy singular integral equations,which can be solved numerically. The effects of electrical load, geometry criterion of piezoelectric strips, relative location of cracks and material properties on the dynamic energy release rate are examined.     

FRACTURE ANALYSIS OF AN ANNULAR CRACK IN A PIEZOELECTRIC LAYER

A flat annular crack in a piezoelectric layer subjected to electroelastic loadings is investigated under electrically impermeable boundary condition on the crack surface. Using Hankel transform technique, the mixed boundary value problem is reduced to a system of singular integral equations. With the aid of Gauss-Chebyshev integration technique, the integral equations are further reduced to a system of algebraic equations. The field intensity factor and energy release rate are determined. Numerical results reveal the effects of electric loadings and crack configuration on crack propagation and growth. The results seem useful for design of the piezoelectric structures and devices of high performance.     

ELECTROELASTIC FIELD FOR AN IMPERMEABLE ANTI-PLANE SHEAR CRACK IN A PIEZOELECTRIC CERAMICS PLATE

ＩｎｔｒｏｄｕｃｔｉｏｎＤｕｅｔｏｔｈｅｉｎｔｒｉｎｓｉｃｃｏｕｐｌｉｎｇｃｈａｒａｃｔｅｒｉｓｔｉｃｓｂｅｔｗｅｅｎｅｌｅｃｔｒｉｃａｎｄｅｌａｓｔｉｃｂｅｈａｖｉｏｒｓ,ｔｈａｔｉｓ,ａｐｐｌｉｅｄｍｅｃｈａｎｉｃａｌｌｏａｄｉｎｇｐｒｏｄｕｃｅｓｅｌａｓｔｉｃｄｅｆｏｒｍａｔｉｏｎ ,ａｓｗｅｌｌａｓｅｌｅｃｔｒｉｃｆｉｅｌｄ ,ａｎｄｃｏｎｖｅｒｓｅｌｙｅｌｅｃｔｒｉｃｆｉｅｌｄｃａｎｇｉｖｅｒｉｓｅｔｏｅｌａｓｔｉｃｄｅｆｏｒｍａｔｉｏｎ ,ｐｉｅｚｏｅｌｅｃｔｒｉｃｍａｔｅｒｉａｌｓｈａｖｅ…     

Electroelastic field for an impermeable anti-plane shear crack in a piezoelectric ceramics plate

Electroelastic behavior of a cracked piezoelectric ceramics plate subjected to four cases of combined mechanical-electrical loads is analyzed. The integral transform method is applied to convert the problem involving an impermeable anti-plane crack to dual integral equations. Solving the resulting equations, the explicit analytic expressions for electroelastic field along the crack line and the intensity factors of relevant quantities near the crack tip and the mechanical strain energy release rate are obtained. The known results for an infinite piezoelectric ceramics plane containing an impermeable anti-plane crack are recovered from the present results only if the thickness of the plate h → ∞. Biography: LI Xian-fang (1964-)     

Impact response of an interface crack in a hybrid piezoelectric laminate

Summary  In a hybrid laminate containing an interfacial crack between piezoelectric and orthotropic layers, the dynamic field intensity factors and energy release rates are obtained for electro-mechanical impact loading. The analysis is performed within the framework of linear piezoelectricity. By using integral transform techniques, the problem is reduced to the solution of a Fredholm integral equation of the second kind, which is obtained from one pair of dual integral equations. Numerical results for the dynamic stress intensity factor show the influence of the geometry and electric field. Received 29 June 2001; accepted for publication 3 December 2001     

Electroelastic analysis of a piezoelectric cylindrical fiber with a penny-shaped crack embedded in a matrix

The electroelastic response of a penny-shaped crack in a piezoelectric cylindrical fiber embedded in an elastic matrix is investigated in this study. Fourier and Hankel transforms are used to reduce the problem to the solution of a pair of dual integral equations. They are then reduced to a Fredholm integral equation of the second kind. Numerical values on the stress intensity factor, energy release rate and energy density factor for piezoelectric composites are obtained to show the influence of applied electric fields.     

Dynamic bending of a symmetric piezoelectric laminated plate with a through crack

The dynamic theory of linear piezoelectricity is applied to analyze the scattering of time harmonic flexural waves by a through crack in a symmetric piezoelectric laminated plate subjected to electric field loading. An incident wave giving rise to moments symmetric about the crack plane is considered. Piezoelectric layers are added to the upper and lower surfaces. Classical lamination theory is extended to include dynamic piezoelectric effects. Fourier transforms are used to reduce the problem to the solution of a pair of dual integral equations, the solution of which is then expressed in terms of a Fredholm integral equation of the second kind. The dynamic moment intensity factor vs. frequency is computed and the influence of the electric field on the normalized values is displayed graphically.     

A penny-shaped interface crack between a functionally graded piezoelectric layer and a homogeneous piezoelectric layer

The problem of a penny-shaped interface crack between a functionally graded piezoelectric layer and a homogeneous piezoelectric layer is investigated. The surfaces of the composite structure are subjected to both mechanical and electrical loads. The crack surfaces are assumed to be electrically impermeable. Integral transform method is employed to reduce the problem to a Fredholm integral equation of the second kind. The stress intensity factor, electric displacement intensity factor and energy release rate are derived, some typical numerical results are plotted graphically. The effects of electrical loads, material nonhomogeneity and crack configuration on the fracture behaviors of the cracked composite structure are analyzed in detail.     

Comments on “Explicit transient solutions for a mode III crack subjected to dynamic concentrated loading in a piezoelectric material” by Yi-Shyong Ing, Mau-Jung Wang [Int. J. Solids Struct. 41 (2004) 3849–3864]

In this comment it is pointed out that the analysis of the dynamic stress intensity factor, dynamic electric displacement intensity factor and dynamic energy release rate conducted by Ing and Wang [Ing, Y.S., Wang, M.J., 2004. Explicit transient solutions for a mode III crack subjected to dynamic concentrated loading in a piezoelectric material. International Journal of Solids and Structures 41, 3849–3864] is incorrect. The correct analysis and corresponding correct plots are presented.