西气东输管道工程中卫黄河穿越隧道场地工程地质条件评价

西气东输工程中卫黄河穿越隧道长1197.77m,高4.3m,宽5.6m。隧道入口高于黄河水位28m,出口高于黄河水位45m。隧道顶板高程为1130m。位于黄河水下100m。隧道场地围岩为寒武系磨盘井组灰绿色、银灰色浅变质中厚层细粒长石石英砂岩、千枚状板岩、绢云母化千枚岩。围岩为弱风化Ⅲ～Ⅳ类岩石。透水率为4～67Lu,纵波波速为500～3300m.s^-1。BQ为300～400。变形模量为6.11～9.22GPa。泊松比（μ）0.14～0.24。内摩擦角（ψ）为42.1°～44.7°。地下水为基岩裂隙水。含水层为寒武系浅变质岩,受大气降水渗入补给,单井涌水量为1.0～50m³.d^-1。隧道轴线穿越区岩体较完整—较破碎,未有全新活动断层。隧道位置选择和开挖深度设计是可行的。施工和长期运营是安全的。     

Singular perturbation analysis of dynamic fields in a thermoelastic solid with a small surface-breaking crack

An asymptotic analysis is presented for a dynamic problem of a semi-infinite isotropic thermoelastic solid with a small surface breaking crack. The exterior surface of the solid is subjected to a series of short thermal pulses. The crack surface is traction free and an ideal thermal contact is assumed across the crack. The stress intensity factor is asymptotically evaluated as a function of the crack depth and time. The effect of a boundary layer associated with the diffusive term is identified. The theoretical model is supplied with numerical simulations.     

Acoustical scattering identification with local impedance through a spectral approach

Acoustical scattering in waveguides is studied in this paper. The Wave Finite Element (WFE) approach is mainly used, since it allows the reduction of problems dealing with periodic waveguides. The paper deals with guided acoustical propagation, that is, propagation in a main direction is privileged. The scattering by a locally reacting lining is first studied. The liner can be characterised by its local impedance in this case. The equivalent surface impedance is therefore calculated. Then, scattering by a porous layer is considered. A full three-dimensional modelling of the lining is preferred since porous materials are bulk reacting. The scattering matrix of the lined part is computed, and acoustical scattering of high-order modes and conversion between modes are highlighted. The acoustic power attenuation is further evaluated. The response of ducts subjected to constraining boundary conditions is also calculated. Numerical results are presented and compared to those obtained with conventional approaches.     

Three‐dimensional lubrication flow of a Herschel–Bulkley fluid

In this paper three‐dimensional lubrication flow of grease is analysed numerically. The lubrication flow configuration is formed by two ellipsoid rollers. The load is assumed to be light enough for the lubrication mode to be purely hydrodynamic. The fluid behaviour is modelled using the Herschel–Bulkley model, and a two‐dimensional modified Reynolds equation is derived. The numerical solutions are obtained by using a hybrid spectral/iterative technique and the Galerkin projection scheme. The effects of the material and geometrical parameters on pressure distribution are emphasized in the study. The investigation is conducted for a situation where the two ellipsoids are fully immersed in a grease lubricant. The effect of the geometry on the pressure distribution is determined by varying the ratio of the semi‐axes and the minimum gap of the two rollers, respectively. The effect of the material parameters is examined by varying the power‐law index and yield stress. It is found that the pressure distribution is strongly influenced by the shape of the rollers, the size of the minimum gap of the rollers and the rheological parameters. Copyright © 2005 John Wiley & Sons, Ltd.     

Objective function choice for control of a thermocapillary flow using an adjoint-based control strategy

The problem of suppressing flow oscillations in a thermocapillary flow is addressed using a gradient-based control strategy. The physical problem addressed is the “open boat” process of crystal growth, the flow in which is driven by thermocapillary and buoyancy effects. The problem is modeled by the two-dimensional unsteady incompressible Navier–Stokes and energy equations under the Boussinesq approximation. The goal of the control is to suppress flow oscillations which arise when the driving forces are such that the flow becomes unsteady. The control is a spatially and temporally varying temperature gradient boundary condition at the free surface. The control which minimizes the flow oscillations is found using a conjugate gradient method, where the gradient of the objective function with respect to the control variables is obtained from solving a set of adjoint equations. The issue of choosing an objective function that can be both optimized in a computationally efficient manner and optimization of which provides control that damps the flow oscillations is investigated. Almost complete suppression of the flow oscillations is obtained for certain choices of the objective function.     

Mohr-Coulomb准则主应力回映算法及在地基问题的应用

针对Mohr-Coulomb准则在应力空间中存在奇异点的问题,提出了主应力空间应力回映算法。分析了多屈服面下塑性流动法则,给出了应力更新过程中应力回映区域的判定方法,推导了不同映射区域下塑性因子的Newton-Raphson迭代求解式和应力更新方程,建立了对应的一致切线模量表达式。利用C++语言,编制了弹塑性有限元求解程序,并对岩土地基问题进行求解,计算结果的比对证明了所编程序的可行性和精确性。     

Application and analysis of functionally graded piezoelectrical rotating cylinder as mechanical sensor subjected to pressure and thermal loads

The exact thermoelastic analysis of a functionally graded piezoelectrical (FGP) rotating cylinder is investigated analytically. The cylinder is subjected to a combination of electrical, thermal, and mechanical loads simultaneously. The structure is a simplified model of a rotational sensor or actuator. The basic governing differential equation of the system is obtained by using the energy method. A novel term, named as the additional energy, is introduced to exact the evaluation of the energy functional. The solution to the governing differential equation is presented for two types of boundary conditions including free rotating and rotating cylinders exposed to the inner pressure. The effect of the angular velocity is investigated on the radial distribution of various components. The mentioned structure can be considered as a sensor for measuring the angular velocity of the cylinder subjected to the pressure and temperature. The obtained results indicate that the electrical potential is proportional to the angular velocity.     

Mesomechanics of deformation and short-term damage of linear elastic homogeneous and composite materials

The structural theory of microdamage of homogeneous and composite materials is generalized. The theory is based on the equations and methods of the mechanics of microinhomogeneous bodies with stochastic structure. A single microdamage is modeled by a quasispherical pore empty or filled with particles of a damaged material. The accumulation of microdamages under increasing loading is modeled as increasing porosity. The damage within a single microvolume is governed by the Huber-Mises or Schleicher-Nadai failure criterion. The ultimate strength is assumed to be a random function of coordinates with power-law or Weibull one-point distribution. The stress-strain state and effective elastic properties of a composite with microdamaged components are determined using the stochastic equations of elasticity. The equations of deformation and microdamage and the porosity balance equation constitute a closed-form system of equations. The solution is found iteratively using conditional moments. The effect of temperature on the coupled processes of deformation and microdamage is taken into account. Algorithms for plotting the dependences of microdamage and macrostresses on macrostrains for composites of different structure are developed. The effect of temperature and strength of damaged material on the stress-strain and microdamage curves is examined __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 6, pp. 3–42, June 2007.     

Nonlinear vibrations of viscoelastic cylindrical shells taking into account shear deformation and rotatory inertia

The vibration problem of a viscoelastic cylindrical shell is studied in a geometrically nonlinear formulation using the refined Timoshenko theory. The problem is solved by the Bubnov–Galerkin procedure combined with a numerical method based on quadrature formulas. The choice of relaxation kernels is substantiated for solving dynamic problems of viscoelastic systems. The numerical convergence of the Bubnov–Galerkin procedure is examined. The effect of viscoelastic properties of the material on the response of the cylindrical shell is discussed. The results obtained by various theories are compared.     

Closed form solution for the finite anti-plane shear field for a class of hyperelastic incompressible brittle solids

The equilibrium solution of a damaged zone in finite elasticity is given for a class of hyperelastic materials which does not suffer tension when a critical stretching value is reached. The study is made for a crack in anti-plane shear loading condition. The prescribed loading is that of linearized elastostatics conditions at infinity. The geometry of the damaged zone is found and the stationary propagation is discussed when the inertia terms can be neglected.     

A modeling and vibration analysis of a piezoelectric micro-pump diaphragm

The vibration analysis of a micro-pump diaphragm is presented. A piezoelectric micro-pump is studied. For this purpose, a dynamic model of the micro-pump is derived. The micro-pump diaphragm is modeled as circular double membranes, a piezoelectric one as actuator and a silicon one for representing the membrane for pumping action. The damping effect of the fluid is introduced into the equations. Vibration analysis is established by explicitly solving the dynamic model. The natural frequencies and mode shapes are calculated. The orthogonality conditions of the system are discussed. To verify the results, the finite-element micro-pump model is developed in ANSYS software package. The results show that the two methods are well comparable.     

界面超高速自相似动态分层分析：反平面情况

对材料界面超高速自相似动态分层的反平面问题进行了解析分析。分层模拟为界面裂纹由零长度自相似扩展，扩展速度为蹭音速或超音速。首先考虑运动集中载荷作用下界面动态分层的情况，利用界面裂纹自相似扩展的运动位错模型将问题归结为奇异积分方程，并求得解析解，分析了裂纹尖端的应力奇性，获得了动应力强度因子。最后，利用叠加原理给出了ｘ＾ｎ型载荷作用下界面动态分层的解。     

Analytical solution of rectangular plate with in-plane variable stiffness

The bending problem of a thin rectangular plate with in-plane variable stiffness is studied. The basic equation is formulated for the two-opposite-edge simply supported rectangular plate under the distributed loads. The formulation is based on the assumption that the flexural rigidity of the plate varies in the plane following a power form, and Poisson’s ratio is constant. A fourth-order partial differential equation with variable coefficients is derived by assuming a Levy-type form for the transverse displacement. The governing equation can be transformed into a Whittaker equation, and an analytical solution is obtained for a thin rectangular plate subjected to the distributed loads. The validity of the present solution is shown by comparing the present results with those of the classical solution. The influence of in-plane variable stiffness on the deflection and bending moment is studied by numerical examples. The analytical solution presented here is useful in the design of rectangular plates with in-plane variable stiffness.     

Simulation of fabric drape using a thin plate element with finite rotation

The draping behavior of fabric is simulated by using four node quadrilateral thin plate elements with finite rotation. The finite element formulation is based on the total Lagrangian approach. An exact representation of finite rotation is introduced. The strain energy function accounting for the material symmetry is obtained by the tensor representation theory. To avoid shear locking, the assumed strain technique for transverse shear is adopted. The conjugate gradient method with a proposed line search algorithm is employed to minimize energy and reach the final shape of fabric. The draping behavior of a rectangular piece of fabric over a rectangular table is simulated.     

分子动力学模拟金属纳米杆

纳米结构（包括纳米杆）的力学性能是纳米超微型器件设计的基础，分子动力学是研究纳米结构力学为的有效方法，采用EAM势模拟金属铜纳米杆在轴向压力作用下的力学行为，结果表明，当外力较小时，纳米杆受压发生纵向收缩；当外力达到某一临界值时，纳米杆发生横向弯曲（即屈曲）行为；稳定的弯曲状态能继承受外载，当外力继续增大时，纳米杆发生倾覆而失效。     

Oscillatory Couette flow of rotating Sisko fluid

The oscillatory Couette flow of a magnetohydrodynamic （MHD） Sisko fluid between two infinite non-conducting parallel plates is explored in a rotating frame. The lower plate is fixed, and the upper plate is oscillating in its own plane. Using MATLAB, a numerical solution to the resulting nonlinear system is presented. The influence of the physical parameters on the velocity components is analyzed. It is found that the effect of rotation on the primary velocity is more significant than that on the secondary velocity. Further, the oscillatory character in the flow is also induced by rotation. The considered flow situation behaves inertialess when the Reynolds number is small.     

任意边界形状的二维刚塑性成形过程的无网格分析方法

将无网格伽辽金方法引入到塑性成形过程模拟,结合刚塑性材料假设,提出了基于刚塑性理论的无网格伽辽金方法,推导了其刚度矩阵方程和求解列式,给出了模具形状任意的二维塑性成形问题摩擦力边界条件的施加方法以及无网格方法应用于任意边界形状的塑性成形问题时的坐标转换关系,建立了无网格方法模拟任意边界形状的塑性成形问题的步骤,并编写了相应的计算程序。应用建立的方法对典型塑性成形过程进行了无网格方法分析,通过与刚塑性有限元方法分析结果的比较,验证了本文所建立方法的可行性。     

Stabilization of Parametric Vibrations of a Nonlinear Continuous System

The purpose of the present paper is to solve an active control problem of nonlinear continuous system parametric vibrations excited by the fluctuating force. The problem is solved using the concept of distributed piezoelectric sensors and actuators with a sufficiently large value of velocity feedback. The direct Liapunov method is proposed to establish criteria for the almost sure stochastic stability of the unperturbed (trivial) solution of the shell with closed-loop control. The distributed control is realized by the piezoelectric sensor and actuator, with the changing widths, glued to the upper and lower shell surface. The relation between the stabilization of nonlinear problem and a linearized one is examined. The fluctuating axial force is modeled by the physically realizable ergodic process. The rate velocity feedback is applied to stabilize the shell parametric vibrations.     

油润滑条件下FeBSiNb非晶涂层磨损性能研究

基于机器人自动化高速电弧喷涂技术在45^#钢基体上制备了FeBSiNb非晶涂层.研究了非晶涂层在油润滑条件下磨损时间、线速度和载荷对涂层的磨损行为.采用扫描电镜(SEM)、能谱分析仪(EDAX)和X射线衍射仪(XRD)等仪器对涂层的组织结构进行了表征,利用纳米压痕仪对涂层的微观力学性能进行了分析.结果表明:涂层具有非晶态结构,组织均匀,层状结构紧凑,具有较低的孔隙率(1.4%)和较高的显微硬度(16.42 GPa).随着磨损速度升高,载荷增加,涂层的磨损率也随之增加.FeBSiNb非晶涂层具有良好的耐磨性,同一磨损条件下,其相对耐磨性为3Cr13涂层的6倍.FeBSiNb非晶涂层的磨损机制主要为脆性疲劳剥落.