Barnett-Lothe tensors and their associated tensors for monoclinic materials with the symmetry plane at x 3=0

The three Barnett-Lothe tensors S, H, L and the three associated tensors S(), H(), L() appear frequently in the real form solutions to two-dimensional anisotropic elasticity problems. Explicit expressions of the components of these tensors are derived and presented for monoclinic materials whose plane of material symmetry is at x ₃=0. We use the algebraic formalism for these tensors but the results are derived not by the straight-forward substitution of the complex matrices A and B into the formulae. Instead, we find the product –AB ^-1, whose real and imaginary parts are SL ^-1 and L ^-1, respectively. The tensors S, H, L are then determined from SL ^-1 and L ^-1. For S(), H(), L() we again avoid the direct substitution by employing an alternate approach. The new approaches require minimal algebra and, at the same time, provide simple and concise expressions for the components of these tensors. Although the new approaches can be extended, in principle, to monoclinic materials whose plane of symmetry is not at x ₃=0 and to materials of general anisotropy, the explicit expressions for these materials are too complicated. More studies are needed for these materials.     

Parameter identification in a soil with constant diffusivity

We consider infiltration into a soil that is assumed to have hydraulic conductivity of the form K = K = K_se^h and water content of the form = K – _r. Here h denotes capillary pressure head while K_s, , and _r represent soil specific parameters. These assumptions linearize the flow equation and permit a closed form solution that displays the roles of all the parameters appearing in the hydraulic function K and . We assume K_s and _r to be known. A measurement of diffusivity fixes the product of and resulting in a parameter identification problem for one parameter. We show that this parameter identification problem, in some cases, has a unique solution. We also show that, in some cases, this parameter identification problem can have multiple solutions, or no solution. In addition it is shown that solutions to the parameter identification problem can be very sensitive to small changes in the problem data.     

Thermal entrance region heat transfer for MHD laminar flow in parallel-plate channels with unequal wall temperatures

The problem of thermal entry heat transfer for Hartmann flow in parallel-plate channels with uniform but unequal wall temperatures considering viscous dissipation, Joule heating and axial conduction effects is approached by the eigenfunction expansion method. The series expansion coefficients for the nonorthogonal eigenfunctions are obtained by using a method for nonorthogonal series described by Kantorovich and Krylov [21]. Numerical results are obtained for the case with entrance condition parameter _o=1 and open circuit condition K=1. The parametric values of Ha=0, 2, 6, 10 and Br=0, –1 are considered for Hartmann and Brinkman numbers, respectively.

---

Zusammenfassung Das Problem der Wärmeübertragung im thermischen Einlauf einer Hartmannströmung im ebenen Spalt mit einheitlichen, aber ungleichen Wandtemperaturen wurde unter Berücksichtigung viskoser Dissipation, Joulescher Heizung und axialer Wärmeleitung mit Hilfe einer Entwicklung nach Eigenfunktionen behandelt. Die Koeffizienten der Entwicklung für nichtorthogonale Eigenfunctionen wurde nach einer Methode für nichtorthogonale Reihen nach Kantorovicz und Krylow [21] berechnet. Numerische Ergebnisse werden für den Eintrittsparameter _o=1 und die Bedingung für den offenen Stromkreis K=1 erhalten. Die Parameterwerte Ha=0, 2, 6, 10 und Br=0, –1 werden für die jeweiligen Werte der Hartmann- und der Brinckman-Zahl betrachtet.

---

Nomenclature a one-half of channel height - ¯B,B₀ magnetic field Induction vector and magnitude of applied magnetic field - Br Brinkman number, _f U_m ²/(k_c) - C_n,D_n coefficients in the series expansion of _e, see eq. 16 - c_p specific heat at constant pressure - ,E₀ electric field intensity vector and component - E_n,O_n even and odd eigenfunctions - Ha Hartmann number, (/_f)^1/2 B_o a - h₁,h₂ local heat transfer coefficients at lower and upper plates - ¯J,J_y electric current density vector and component - K external loading parameter, E_o/(B_o U_m) - k thermal conductivity - Nu₁, Nu₂ local Nusselt numbers, h₁,a/k and h₂a/k, respectively - P fluid pressure - Pe Peclet number, PrRe - Pr Prandtl number, C_{p f}/k - q₁,q₂ rates of heat transfer per unit area,^–k(T/Z)Z=–a'^–k(T/Z) Z=a respectively - Re Reynolds number, U_ma/u_f - T,T₀,T₁,T₂ fluid temperature, uniform entrance temperature, uniform but different lower and upper plate temperatures, respectively - T_b,T_m bulk temperature and (T₁+T₂)/2 - U,U_m,u axial, mean and dimensionless velocities, respectively - ¯V velocity vector - X,Z axial and transverse coordinates - x,z dimensionless coordinates - _n,_n even and odd eigenvalues - ,₀,_b dimensionless fluid, entrance and bulk temperatures, respectively - _c,_e,_f characteristic temperature difference (T₂-T_m), and dimensionless fluid temperatures, defined by eq. (10) - _e,_f magnetic permeability and viscosity of fluid - fluid density - electric conductivity - viscous dissipation function - (1-)/2     

Gas flow from plane vessels with large angles of inclination of the walls

Numerical solutions are obtained for problems of steady supersonic gas flow from infinite plane vessels with angles of inclination of the walls to the plane of symmetry _c on the interval 90° < _c 180°. The problems are posed and solved in the hodograph plane. It is shown that starting from a certain _c* the flow choking mechanism is determined not by the arrival of the limiting characteristic at the edge of the opening (classical choking mechanism) but by the interaction of the jet with the outside surface of the vessel wall. The effect of _c and the ambient pressure on the local and integral flow characteristics is investigated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 144–151, January–February, 1991.The author wishes to thank A. N. Kraiko for discussing the results and N. I. Tillyaev for assisting with the work.     

Determination of specific thrust in unchoked regimes and design of a separationless convergent nozzle contour

The variation of the specific thrust R_Y on the angle of inclination of the wall is analyzed within the framework of the ideal gas model using the results of specific impulse and flow rate calculations for conical convergent nozzles. It is shown that in unchoked regimes nozzles with different have almost the same values of R_Y for both subcritical and supercritical pressure ratios _c. On the interval _C < 6 typical of convergent nozzles conical convergent nozzles with =30–90° have almost the same value of the specific thrust, maximal relative to the R_Y of nozzles with < 30°. In the presence of viscosity forces local boundary layer separation may occur in the neighborhood of the entrance section of the convergent nozzle. A method of constructing a separationless convergent nozzle contour with enhanced thrust is developed on the basis of a boundary layer separation criterion. The separationless contour is determined for given values of the flow rate, specific heat ratio, Reynolds number, wall temperature and initial boundary layer displacement thickness.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 158–164, January–February, 1990.     

Temperament Development Modeled as a Nonlinear Complex Adaptive System

Using approach-withdrawal (AW) as a specific instance of temperament, a theoretical model of temperament as a complex dynamic system is proposed. Developmental contextualism (Lerner, 1998) serves as a guiding theory in determining the structural components of the system and Kauffman's (1993) Boolean models of self-organization are adapted to estimate the parameter functions. In this model P(AW) = f(, ) where P(AW) is the probability density function of an approach or a withdrawal response, ( is a standardized parameter estimate of the biological sensitivity to stimulation, and is a standardized parameter estimate of the contextual response to an approach or withdrawal response. It is theorized that the functions of ( and follow a Hill function of the forms: d /dt = (²/c² + ²) – K₁ d /dt = ( ²/c² + ²) – K₂, where K₁, K₂, and c are system constants. This results in a double sigmoid function in which at extreme values of and the system stabilizes on a steady state of either approach or withdrawal response patterns. At intermediate parameter values the probability density functions of approach and withdrawal responses are wider. Thus, AW can be modeled as representing two basins of attraction. In addition, considerations are given to the systems sensitivity to initial conditions.     

Forced oscillations of a rotating shaft with nonlinear spring characteristics and internal damping (1/2 order subharmonic oscillations and entrainment)

Nonlinear forced oscillations of a rotating shaft with nonlinear spring characteristics and internal damping are studied. In particular, entrainment phenomena at the critical speeds of 1/2 order subharmonic oscillations of forward and backward whirling modes are investigated. A self-excited oscillation appears in the wide range above the major critical speed. The amplitude of this oscillation reaches a limit value and then a self-sustained oscillation occurs. In the vicinity of a 1/2 order subharmonic oscillation of a forward whirling mode, a self-excited oscillation is entrained by a subharmonic oscillation. In the vicinity of a 1/2 order subharmonic oscillation of a backward whirling mode, either a self-excited oscillation or a subharmonic oscillation occurs.Experiments were made by an elastic rotating shaft with a disc. Nonlinearity in its restoring force was due to an angular clearance of a bearing and internal damping was due to friction between the shaft and an inner ring of the bearing. A self-excited oscillation was observed in the range above the major critical speed and this self-excited oscillation was entrained by a 1/2 order subharmonic oscillation of a forward whirling mode.Nomenclature O–xyz rectangular coordinate system - , _x, _y inclination angle of a shaft and its projections on the xz- and yz-planes - _x, _y inclination angles in rotating coordinates - , polar coordinates - I _p polar moment of inertia of a rotor - I diametral moment of inertia of a rotor - i _p ratio of I _p to I - dynamic unbalance of a rotor - rotating speed (angular velocity) - F magnitude of a dynamic unbalance force, F = (1 – i _p )² - c external damping coefficient - h internal damping coefficient - t time - D _x , D _y internal damping terms in stationary coordinates - D _x , D _y internal damping terms in rotating coordinates - N _x , N _y nonlinear terms in restoring forces     

Displacement type unified equation for bending, buckling and vibration of conical shells and its applications

By using Donnell's simplication and starting from the displacement type equations of conical shells, and introducing a displacement functionU(s,,) (In the limit case, it will be reduced to cylindrical shell displacement function introduced by V. S. Vlasov) and a generalized loadq,(s,,),the equations of conical shells are changed into an eighth—order solvable partial differential equation about the displacement functionU(s,,). As a special case, the general bending problem of conical shells on Winkler foundation has been studied. Detailed numerical results and boundary coefficients for edge unit loads are obtained.The project supported by the National Natural Science Foundation of China.     

Squeezing flows of Newtonian liquid films an analysis including fluid inertia

A theoretical study is made of the flow behavior of thin Newtonian liquid films being squeezed between two flat plates. Solutions to the problem are obtained by using a numerical method, which is found to be stable for all Reynolds numbers, aspect ratios, and grid sizes tested. Particular emphasis is placed on including in the analysis the inertial terms in the Navier-Stokes equations.Comparison of results from the numerical calculation with those from Ishizawa's perturbation solution is made. For the conditions considered here, it is found that the perturbation series is divergent, and that in general one must use a numerical technique to solve this problem.Nomenclature a half of the distance, or gap, between the two plates - a ₀ the value of a at time t=0 - adot da/dt - ä d² a/dt ² - d³ a/dt ³ - a ⁱ components of a contravariant acceleration vector - f unknown function of z ₀ and t defined in (6) - f ⁱ function defined in (9) f ¹=r ₀ g(z ₀, t) f ²= ₀ f ³=f(z ₀, t) - F force applied to the plates - g unknown function of z ₀ and t defined in (6) - g g/z ₀ - h grid dimension in the z ₀ direction (see Fig. 5) - Christoffel symbol - i, j, k, l indices - k grid dimension in the t direction (see Fig. 5) - r radial coordinate direction defined in Fig. 1 - r ₀ radial convected coordinate - R radius of the circular plates - t time - v _r fluid velocity in the r direction - v _z fluid velocity in the z direction - v fluid velocity in the direction - x ⁱ cylindrical coordinate x ¹=r x²= x³=z - z vertical coordinate direction defined in Fig. 1 - z ₀ vertical convected coordinate - tangential coordinate direction - ₀ tangential convected coordinate - viscosity - kinematic viscosity, / - ⁱ convected coordinate ¹=r₀ ²=₀ ³=z₀ - density     

Stationary combustion modes with allowance for heat losses

An attempt is made to investigate the number of possible stationary combustion modes in a continuous-flow semi-infinite pipe with allowance for heat losses through the walls. Cases of a zero-order reaction in the reaction mixture or similarity of the concentration and temperature fields are considered. The equations are averaged with respect to the transverse coordinate . Within the framework of these approximations it is found that the number of stationary combustion modes is determined by the roots _n of some function. The roots _2k correspond only to trivial unstable solutions. The roots _2k–1 correspond to modes possible within broad regions of variation of the parameters characterizing the temperature of the mixture, the mixture feed rate, and the rate of heat removal. These regions intersect, forming zones where several stationary modes coexist. In these zones, apart from monotonic solutions there may also be solutions that initially make several oscillations. It is shown that the latter are obviously unstable and, in the last analysis, lead to one of the monotonic modes. The common case of not more than three roots is examined in detail.If the heat release function can change sign, then a similar picture is also observed in the absence of heat losses through the walls (the roots _2k–1 and _2k may change roles). In this case it is no longer necessary to average the equations with respect to , since there will not be any corresponding derivatives.     

Normal forms for random diffeomorphisms

Given a dynamical system (,, ,) and a random diffeomorphism (): ^{d d} with fixed point at x=0. The normal form problem is to construct a smooth near-identity nonlinear random coordinate transformation h() to make the random diffeomorphism ()=h()^–1() h() as simple as possible, preferably linear. The linearization D(, 0)=:A() generates a matrix cocycle for which the multiplicative ergodic theorem holds, providing us with stochastic analogues of eigenvalues (Lyapunov exponents) and eigenspaces. Now the development runs pretty much parallel to the deterministic one, the difference being that the appearance of turns all problems into infinite-dimensional ones. In particular, the range of the homological operator is in general not closed, making the conceptof-normal form necessary. The stochastic versions of resonance and averaging are developed. The case of simple Lyapunov spectrum is treated in detail.     

Some self-similar solutions of the Leibenzon equation

Self-similar one-dimensional solutions of the Leibenzon equation c²_t= _zz ^k (z 0, k 2) are considered. Approximate solutions are constructed for the two cases in which the initial value = ₁ = const > 0 and on the boundary either a constant value = ₂ < ₁ is maintained or the flow (directed outwards) is given. In the first problem the dependence of the boundary flow on the governing parameters is determined. A characteristic property of the types of motion in question is the existence near the boundary of a region, expanding with time, in which the flow is almost independent of the coordinate.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 145–150, September–October, 1991.     

The effect of rotation on conical wave beams in a stratified fluid

Experiments are conducted to test extant theory on the effect of uniform rotation on the angle of conical beam wave propagation excited by a sphere vertically oscillating at frequency in a density stratified fluid. The near-constant Brunt–Väisälä frequency stratification N produced in situ in a rotating cylindrical tank exhibits no effect of residual motion for the range of Froude numbers investigated. Good agreement between experiment and theory is found over the range of angles 15°<<65° using the synthetic schlieren visualization technique. In particular, the cut-off for wave propagation at =2, below which waves do not propagate, is clearly observed.     

Wave angle for oblique detonation waves

The flow field associated with a steady, planar, oblique detonation wave is discussed. A revision is provided for- diagrams, where is the wave angle and is the ramp angle. A new solution is proposed for weak underdriven detonation waves that does not violate the second law. A Taylor wave, encountered in unsteady detonation waves, is required. Uniqueness and hysteresis effects are also discussed.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

Symmetric Representation of Stress and Strain in the Stroh Formalism and Physical Meaning of the Tensors L, S, L(θ) and S(θ)

The Stroh formalism for two-dimensional deformation of an anisotropic elastic material does not give the stress _ij explicitly in a symmetric form. It does not give an explicit expression for the strain _ij at al. Mantic and Paris [1] have recently derived an explicit symmetric representation of stress. We present here a new and elementary derivation that is more straight forward and transparent. The derivation does not require consideration of the surface traction or the normalization of the Stroh eigenvectors. The new derivation also provides an explicit symmetric representation of strain. Moreover, it allows us to deduce two of the three Barnett–Lothe tensors L, S [2] and the associated tensors L ( ), S ( ) [3], resulting in a physical interpretation of these tensors and the component ( L S )₂₁.     

Investigation of supersonic viscous flow past a sphere in the presence of subsonic and sonic injection

Supersonic flow past a sphere with a given rate of gas injection along the generator is investigated numerically on the range Re=10²–10⁴. Calculations have been made on the interval 0 90°, where is the angle between the axis of symmetry and the normal to the surface. It is shown that for high subsonic and sonic injection rates it is possible to observe qualitatively new features in the flow structure and in the distribution of the local supersonic flow characteristics around the perimeter of the sphere not previously noted in [9]. In the case of sonic injection the changes in flow structure occur only in the supersonic zone. In the neighborhood of the transition from a subsonic to sonic injection velocity the heat flux has a local maximum, which in absolute value does not exceed the heat flux in the absence of injection. It is shown that there may be qualitative differences in the pressure distribution over the surface of the body with increase in the injection parameter depending on the distribution and value of the injected gas flow rate and, moreover, the number Re.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 83–89, January–February, 1988.     

Stress analysis of plates with a circular hole reinforced by flange reinforcing member

This paper deals with the problem of stress analysis of plates with a circular hole reinforced by flange reinforcing member. The so called flange reinforcing member here means that the reinforcing member is built up by setting shapes or bars with any section shape on both sides of the plates along the edge of the hole. Two cases of external loads are considered. In one case the external loads are stressesσ_X^(∞),σ_Y^(∞),and τ_XY^(∞) acting at infinite point of the plate, and in the other the external loads are linear distributed normal stresses. The procedure of solving the problems mentioned above consists of three steps. Firstly, the reinforcing member is taken out from the plates and considered to be a circular bar being solved to determine its deformation under the action of radial force q₀(θ) and tangential force t₀(θ) which are forces acting upon each other between reinforcing member and plate. Secondly, the displacements of plate with a circular hole under the action of q₀(θ) and t₀(θ) and external loads are determined. Finally, forces q₀(θ) and t₀(θ) are obtained by the compatibility of deformations between reinforcing member and plate. Then the internal forces and displacements of reinforcing member and plate are deduced from q₀(θ) and t₀(θ) obtained.     

Free convection heat transfer from an isothermal plate with arbitrary inclination

This paper presents a new formulation for the laminar free convection from an arbitrarily inclined isothermal plate to fluids of any Prandtl number between 0.001 and infinity. A novel inclination parameter is proposed such that all cases of the horizontal, inclined and vertical plates can be described by a single set of transformed equations. Moreover, the self-similar equations for the limiting cases of the horizontal and vertical plates are recovered from the transformed equations by setting=0 and=1, respectively. Heated upward-facing plates with positive and negative inclination angles are investigated. A very accurate correlation equation of the local Nusselt number is developed for arbitrary inclination angle and for 0.001 Pr .

---

Wärmeübertragung bei freier Konvektion an einer isothermen Platte mit beliebiger Neigung

Zusammenfasssung Diese Untersuchung stellt eine neue Formulierung der laminaren freien Konvektion von Flüssigkeiten mit einer Prandtl-Zahl zwischen 0,001 und unendlich an einer beliebig schräggestellten isothermen Platte dar. Ein neuer Neigungsparameter wird eingeführt, so daß alle Fälle der horizontalen, geneigten oder vertikalen Platte von einem einzigen Satz transformierter Gleichungen beschrieben werden können. Die unabhängigen Gleichungen für die beiden Fälle der horizontalen and vertikalen Platte wurden für=0 und=1 aus den transformierten Gleichungen wieder abgeleitet. Es wurden erwärmte aufwärtsgerichtete Platten mit positiven und negativen Neigungswinkeln untersucht. Eine sehr genaue Gleichung wurde für die lokale Nusselt-Zahl bei beliebigen Neigungswinkeln und für 0,001 Pr entwickelt.

---

Nomenclature C _p specific heat - f reduced stream function - g gravitational acceleration - Gr local Grashof number,g(T _w –T _w ) x³/v² - h local heat transfer coefficient - k thermal conductivity - n constant exponent - Nu local Nusselt number,hx/k - p pressure - Pr Prandtl number, v/ - Ra local Rayleigh number,g(T _w –T )J x³/v - T fluid temperature - T _w wall temperature - T temperature of ambient fluid - u velocity component in x-direction - v velocity component in y-direction - x coordinate parallel to the plate - y coordinate normal to the plate Greek symbols thermal diffusivity - thermal expansion coefficient - (Ra¦sin¦)^1/4/( Ra cos()^1/5 - pseudo-similarity variable, (y/) - dimensionless temperature, (T–T )/(T _w–T ) - ( Ra cos)^1/5+(Rasin)^1/4 - v kinematic viscosity - 1/[1 +(Ra cos)^1/5/( Ra¦sin)^1/4] - density of fluid - Pr/(1+Pr) - _w wall shear stress - angle of plate inclination measured from the horizontal - stream function - dimensionless dynamic pressure     

Perturbation analysis for periodic heat transfer in radiating fins

A perturbation analysis is presented for periodic heat transfer in radiating fins of uniform thickness. The base temperature is assumed to oscillate around a mean value. The perturbation expansion is carried out in terms of dimensionless amplitude of the base temperature oscillation. The zero-order problem which is nonlinear, and corresponds to the steady state fin behaviour, is solved by quasilinearization. A method of complex combination is used to reduce both the first and the second order problems to two, coupled linear boundary value problems which are subsequently solved by a noniterative numerical scheme. The second-order term is composed of an oscillatory component with twice the frequency of base temperature oscillation and a time-independent term which causes a net change in the steady state values of temperature and heat transfer rate. Within the range of parameters used, the net effect is to decrease the mean temperature and increase the mean heat transfer rate. This is in constrast to the linear case of convecting fins where the mean values are unaffected by base temperature oscillations. Detailed numerical results are presented illustrating the effects of fin parameter N and dimensionless frequency B on temperature distribution, heat transfer rate, and time-average fin efficiency. The time-average fin efficiency is found to reduce significantly at low N and high B.

---

Störungsanalyse für periodische Wärmeübertragung an Strahlungsrippen

Zusammenfassung Eine Störungsanalyse wird für periodische Wärmeübertragung in Strahlungsrippen gleicher Dicke vorgelegt. Die Fußtemperatur wird als um einen Mittelwert schwingend angenommen. Die Störungsentwicklung wird in Termen einer dimensionslosen Amplitude e dieser Schwingung angesetzt. Das Problem nullter Ordnung, das nichtlinear ist und dem stationären Verhalten der Rippe entspricht, wird durch Quasilinearisierung gelöst. Eine Methode der komplexen Kombination wird angewandt, um die Probleme erster und zweiter Ordnung auf zwei gekoppelte Grenzwertprobleme zu reduzieren, die nacheinander nach einem nichtiterativen Schema gelöst werden. Der Term zweiter Ordnung besteht aus einer Schwingungskomponente mit der doppelten Frequenz der Schwingung der Fußtemperatur und einem zeitunabhängigen Term, der eine Nettoänderung der stationären Werte der Temperatur und der Wärmeübertragung verursacht. Im verwendeten Bereich der Parameter tritt eine Abnahme der mittleren Temperatur und eine Zunahme der mittleren Wärmeübertragung auf. Das steht im Gegensatz zum linearen Fall der Konvektionsrippe, bei dem die Mittelwerte durch Schwingungen der Fußtemperatur nicht beeinflußt werden. Detaillierte numerische Ergebnisse zeigen die Einflüsse des Rippenparameters N und der dimensionslosen Frequenz B auf Temperatur Verteilung, Wärmeübertragung und zeitliches Mittel des Rippengütegrades. Dieses zeitliche Mittel nimmt merklich ab bei kleinem N und hohem B.

---

Nomenclature b fin thickness - B dimensionless frequency, L²/ - E emissivity - f₀, f₁ functions of X - g₀, g₁, g₂ functions of X - h₀, h₁, h₂ functions of X - k thermal conductivity - L fin Length - N fin parameter, 2EL²T_bm/bk - q heat transfer rate - Q dimensionless heat transfer rate, qL/kbT_bm - t time - T temperature - T_b fin base temperature - T_S effective sink temperature - T_bm mean fin base temperature - x axial distance - X dimensionless axial distance, x/L - dimensionless amplitude of base temperature (s. Eq.2) - thermal diffusivity - instantaneous fin efficiency - time-average fin efficiency - _ss steady state fin efficiency - dimensionless temperature, T/T_bm - ₀ zero-order approximation - ₁ first-order approximation - ₂ second-order approximation - _2s steady component of ₂ - , ₁, ₂ constants - complex function of X - ₁ real part of - ₂ imaginary part of - complex function of X - ₁ real part of Y - ₂ imaginary part of - dimensionless time, t/L² - frequency of base temperature oscillation     

Flow with separation of an ideal fluid past a wing of infinite aspect ratio with a triangular protrusion

A study is made of the steady flow of an incompressible ideal fluid past a rectangular wing of infinite aspect ratio that has a protrusion on its leading edge. The protrusion is a triangular plate of small aspect ratio. It is assumed that flow separation occurs only from the side edges of the protrusion. An asymptotic solution to the problem is found for = O(), = o(1), where is the half-angle at the tip of the protrusion, and is the angle of attack. The results of numerical calculations are given.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 65–72, May–June, 1982.We are sincerely grateful to G. P. Svishchev for posing the problem and for interest in the work.