受面内冲击载荷下加筋板的非线性动态屈曲

分析了受面内冲击载荷下加筋板的非线性弹性动态屈曲．考虑板与筋的膜力，忽略面内位移，运用Hamilton变分原理，得出非线性控制方程，采用双级数形式的挠度假设，由Galerkin方法得到离散方程组，根据B-R准则，判断加筋板的动态屈曲．     

加筋板弹性大挠度的冲击响应分析

用半解析的方法分析了横向冲击载荷下加筋板的非线性瞬态响应。考虑膜力的存在 ,忽略筋截面上的剪切应力 ,引入板的应力函数 ,采用离散加筋板模型 ,运用能量原理建立加筋板的动响应控制方程。假设挠度为双级数形式 ,运用迦辽金法 ,将加筋板的动响应方程转化为一个多自由度的动力系统 ,采用数值方法来求解。最后给出了几个模型的计算结果。     

投影云纹法在研究加劲板后屈曲平衡路径及后屈曲模态转化过程的应用

本文应用投影云纹法研究受压加劲板的大挠度非线性问题。用投影云纹法测量加劲板后屈曲平衡路径,记录了随着载荷的增加,加劲板后屈曲模态变化的全过程。将云纹图输入微型计算机处理,获得了加劲板的全场位移和全场应力的分布情况。用投影云纹法所测得的结果同理论计算值基本吻合。     

正交各向异性加筋板屈曲分析方法研究

为简化正交各向异性加筋板屈曲分析,本文将筋条位移场用其所在位置的板的位移表达,建立加筋板总势能,通过离散位移场,利用最小势能原理,推导出基于里兹法的正交各向异性加筋板屈曲分析控制方程,采用Matlab进行求解.基于本文推导的方程对单筋和三筋加筋板在不同压剪比下的屈曲荷载和模态进行分析,得到与Abaqus基本一致的结果.加筋板的屈曲荷载随着筋条数增加明显增大;压剪比为1∶1时,各阶屈曲荷载均最小;随着位移函数阶数提高,本文算法计算精度提高,但相应的计算量也显著增大.     

四边固定加劲板的非线性自由振动

针对工程中常用的加劲板, 研究了非线性振动的求解方法与振动特性. 将加劲板分为板与加劲肋两个部分考虑, 其中板视为考虑几何非线性的大挠度板, 加劲肋视为Euler梁. 假定加劲板的位移, 利用Lagrange方程结合系统能量和振型叠加推导了加劲板的动力平衡方程. 运用椭圆函数及摄动法计算加劲板非线性振动的单模态解, 多模态解则通过增量迭代法进行求解. 最后, 结合有限元软件ANSYS对一个四边固定且不可移动的加劲板进行分析, 讨论解的收敛性, 并分析两个方向设置不同数量加劲肋的情况下非线性自振频率与振幅的关系, 得到了一些加劲板非线性振动特性.      

Buckling and large deflection behaviors of radially functionally graded ring-stiffened circular plates with various boundary conditions

The buckling and large deflection behaviors of axis-symmetric radially functionally graded (RFG) ring-stiffened circular plates are investigated by the dynamic relaxation (DR) method combined with the finite difference discretization technique. The material properties of the constituent components of the RFG plate are assumed to vary continuously according to the Mori-Tanaka distribution along the radial direction. The nonlinear governing equations are obtained in the incremental form based on the first-order shear deformation plate theory (FSDT) and the von Karman relations for large deflection. In the buckling analysis, an external in-plane load is applied to the plate incrementally so that, in each load-step, the incremental form of the governing equations can be solved by a numerical code prepared based on the DR method. After converging the DR code in the first increment, the latter load-step is added to the previous one, and the program is repeated again. The critical buckling load is determined from the compressive load-displacement curve obtained by solving the incremental form of the governing equa- tions. Based on the present incremental form of formulation, a bending analysis can also be conducted if the whole load is applied simultaneously. Finally, a detailed parametric study is carried out to investigate the influences of various boundary conditions, grading indices, thickness-to-radius ratios, stiffener’s positions and depths on the critical buckling load, and displacements and stresses resulted from the bending analysis. It is observed that the effect of the stiffener on the results is much greater in the functionally graded plate with higher material grading indices. The results also reveal that, by increasing the depth of the stiffer, the values of ascending the critical buckling load are approximately identical for both simply supported and clamped boundary conditions.     

黏弹性板的大挠度蠕变屈曲

研究了具有初始小挠度受轴向压载黏弹性板的蠕变屈曲问题，在建立控制方程时，利用了von Karman非线性应变-位移关系，并考虑了初始挠度，用标准线性固体模型描述材料的黏弹性特性，在求解非线性积分方程时，利用梯形公式计算记忆积分式，将非线性积分方程化为非线性代数方程进行数值求解，得到了结构的蠕变变形过程，又将问题退化到小挠度情况进行研究，得到了挠度随时间扩展的解析解，分析了瞬时失稳临界载荷、持久临界载荷的物理意义，讨论了考虑几何非线性对黏弹性板蠕变屈曲的影响。     

多层正交异性矩形薄板弯曲振动稳定解析解

构造了带有补充项的双重正弦傅里叶级数通解来求解各种边界条件的多层正交各向异性矩形薄板的弯曲、振动和稳定问题.将坐标轴取在中性面上,求出用挠度表示的应力表达式,然后由横截面上每单位宽度的应力合成板的内力;再将层合板的内力代入板的平衡方程中得到板的控制方程,将多层板的物理参数折算为等价的单层板物理参数;最后联立控制方程与边界条件,求得未知量的系数并代入本文的通解中.本文的通解不需要叠加即可求解各种边界条件的板的弯曲、振动和稳定问题;现有的对于单层板的研究都可以用本文的方法拓展到多层板领域;对于复杂边界条件的板,也可以使用该通解分析.     

Nonlinear dynamic response of a stiffened plate with four edges clamped under primary resonance excitation

An approach is presented to study the nonlinear forced vibration of a stiffened plate. The stiffened plate is divided into one plate and some stiffeners, with the plate considered to be geometrically nonlinear, and the stiffeners taken as geometrically nonlinear Euler beams. Assuming the displacement of the stiffened plate, Lagrange equation and modal superposition method are used to derive the dynamic equilibrium equations of the stiffened plate according to energy of the system. A stiffened plate with four clamped edges subjected to harmonic excitation is studied by means of the method of multiple scales; the first approximation solutions of the double-modal motion of the system are obtained. Numerical examples for different stiffened plates are presented to discuss the steady response of the primary resonance and the amplitude?Cfrequency relationship; and some nonlinear forced vibration characteristics of the stiffened plate are obtained, which are useful for engineering design.     

功能梯度与均匀圆板静动态解之间的相似转换关系

基于经典板理论,研究了功能梯度材料圆板的轴对称弯曲、屈曲和自由振动解与相应的均匀材料圆板解之间的转换关系.通过消去拉-弯耦合项得到了以挠度函数表示的功能梯度圆板的弯曲、屈曲和自由振动控制方程.分析功能梯度圆板与均匀圆板的控制方程之间的相似性,得到了功能梯度材料圆板与均匀圆板的解之间解的相似转换关系,在假定FGM圆板的材料性质沿厚分别以幂函数和指数函数的度变规律后,给出了相应的转换系数的解析表达式.该系数集中反映了功能梯度圆板的材料非均匀性.在已知均匀材料圆板轴对称解的条件下,可将功能梯度材料圆板轴对称问题的求解转化为相似转换系数的计算问题.这一方法可为非均匀板的求解提供了十分便捷有效的途径,而且便于工程应用.     

基于遗传算法的弹性地基加肋板肋梁无网格优化分析

基于遗传算法及一阶剪切理论, 提出一种弹性地基上加肋板肋条位置优化的无网格方法. 首先, 通过一系列点来离散平板及肋条, 并用弹簧模拟弹性地基, 从而得到加肋板的无网格模型; 其次, 基于一阶剪切理论及移动最小二乘近似原理导出位移场, 求出弹性地基加肋板总势能; 再次, 根据哈密顿原理导出结构的弯曲控制方程, 并通过完全转换法处理边界条件; 最后, 引入遗传算法和改进遗传算法, 以肋条的位置为设计变量、弹性地基板的中心点挠度最小值为目标函数, 对肋条位置进行优化达到地基板控制点挠度最小的目的. 以不同参数、载荷布置形式的弹性地基加肋板为例, 与ABAQUS有限元结果及文献解进行比较. 研究表明, 采用所提出的无网格模型可有效求解弹性地基上加肋板弯曲问题, 结果易收敛, 同时基于遗传算法与改进混合遗传算法所提出的无网格优化方法均可有效优化弹性地基加肋板肋条位置, 后者计算效率相对较高, 只进行了三次迭代便可获得稳定的最优解, 此外在优化过程中肋条位置改变时只需要重新计算位移转换矩阵, 又避免了网格重构.      

静力预加载环向加筋圆柱壳的轴向流-固冲击屈曲

将初缺陷放大准则应用于静力预加载环向加筋圆柱壳结构受轴向流-固冲击加载作用时的几何非线性动力屈曲研究中。运用Galerkin方法推导出壳体-肋骨系统的动力屈曲控制方程,并且采用Runge-Kutta法进行数值求解。着重分析了静力预加载荷对结构屈曲性态及抗轴向冲击能力的影响。     

An analytical solution for buckling of moderately thick functionally graded sector and annular sector plates

In this article, an analytical solution for buckling of moderately thick functionally graded (FG) sectorial plates is presented. It is assumed that the material properties of the FG plate vary through the thickness of the plate as a power function. The stability equations are derived according to the Mindlin plate theory. By introducing four new functions, the stability equations are decoupled. The decoupled stability equations are solved analytically for both sector and annular sector plates with two simply supported radial edges. Satisfying the edges conditions along the circular edges of the plate, an eigenvalue problem for finding the critical buckling load is obtained. Solving the eigenvalue problem, the numerical results for the critical buckling load and mode shapes are obtained for both sector and annular sector plates. Finally, the effects of boundary conditions, volume fraction, inner to outer radius ratio (annularity) and plate thickness are studied. The results for critical buckling load of functionally graded sectorial plates are reported for the first time and can be used as benchmark.     

粘弹性大挠度圆板的轴对称弯曲

本文探讨粘弹性大挠度圆板的轴对称弯曲的基本方程和求解方法.用半逆解和摄动法分析挠度与膜力,对标准线性固体进行数例计算,并与小挠度理论相比较.全部方程与解答可退化得相应的弹性大挠度板的结果.     

爆炸载荷作用下加筋板的失效模式分析及结构优化设计

通过对爆炸载荷下具有1根加强筋的固支矩形加筋板的有限元模拟，探讨了抗爆加筋板结构优化设计方法，分析了加筋板的失效模式以及加强筋相对刚度和冲击载荷强度对加筋板失效模式的影响，指出了失效模式Ⅰ下的3种变形模态以及失效模式Ⅱ下的2种子失效模式，得到了失效模式Ⅰ下加强筋和加筋板最大挠度的近似计算公式，提出了单根加筋板的两种失效模式的判别条件，并对具有1根加强筋的固支矩形加筋板抗爆结构进行了优化设计。结果表明，通过数值模拟或模型实验可以求得任意加筋板结构由发生塑性大变形到发生破损的临界条件，从而确定抗爆性能最强时加筋板的质量与加强筋横截面尺寸及间距间的关系，实现对抗爆加筋板结构的优化设计。     

稳定性试验平台的研制与试验研究

板和加筋板是组成船体的主要结构,精确预报板和加筋板的强度是确保船舶结构安全性的一个关健问题.文章基于结构稳定性理论,设计了一套稳定性试验平台,使其能够完成板、加筋板的稳定性试验.以板为试验研究对象,进行了稳定性试验,得到了各组试验的临界载荷;利用弹塑性理论推导了各组板试件的屈曲临界载荷.通过试验值和理论值的对比分析,验...     

On the refined first-order shear deformation plate theory of Kármán type

A new refined first-order shear-deformation plate theory of the Kármán type is presented for engineering applications and a new version of the generalized Kármán large deflection equations with deflection and stress functions as two unknown variables is formulated for nonlinear analysis of shear-deformable plates of composite material and construction, based on the Mindlin/Reissner theory. In this refined plate theory two rotations that are constrained out in the formulation are imposed upon overall displacements of the plates in an implicit role. Linear and nonlinear investigations may be made by the engineering theory to a class of shear-deformation plates such as moderately thick composite plates, orthotropic sandwich plates, densely stiffened plates, and laminated shear-deformable plates. Reduced forms of the generalized Kármán equations are derived consequently, which are found identical to those existe in the literature. Foundation item: the National Natural Science Foundation of China (59675027) Biography: Zhang Jianwu (1954-)     

ON THE REFINED FIRST-ORDER SHEAR DEFORMATION PLATE THEORY OF KARMAN TYPE

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｕｓｅｏｆｌａｍｉｎａｔｅｄｃｏｍｐｏｓｉｔｅｓｉｎｔｈｉｎ＿ｗａｌｌｅｄｓｔｒｕｃｔｕｒｅｓｉｎｃｒｅａｓｅｓｓｏｔｈａｔｅｆｆｅｃｔｓｏｆｔｒａｎｓｖｅｒｓｅｓｈｅａｒｄｅｆｏｒｍａｔｉｏｎｓｃａｎｎｏｔｂｅｎｅｇｌｅｃｔｅｄａｎｄｉｎｖｏｋｅｑｕｉｔｅｃｏｍｐｌｅｘｅｓｉｎｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓ.Ｉｔｉｓｗｅｌｌ＿ｋｎｏｗｎｔｈａｔｔｈｅｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓｏｆｌａｍｉｎａｔｅｄｐｌａｔｅｓａｎｄｓｈｅｌｌｓｃｏｕｎｔｉｎｇｆｏｒｔｒ…     

基于非线性分析的加肋板肋条位置无网格优化

在加肋板无网格模型中, 肋条的位置对各种工况下加肋板受力性能的影响至关重要. 文章基于一阶剪切变形和移动最小二乘法理论提出一种考虑非线性影响的加肋板无网格模型, 并利用遗传算法优化肋条位置. 首先, 采用离散节点分别对平板和肋条进行离散, 得到加肋板的无网格离散模型; 其次, 通过冯·卡门大挠度理论得到非矩形板几何非线性问题的弯曲控制方程; 再次, 通过哈密顿原理得到加肋非矩形板自由振动问题的控制方程; 最后引入遗传算法, 以肋条的位置为设计变量、非矩形加肋板中心点挠度最小或自振频率最大为目标函数, 对肋条位置进行优化. 在考虑了几何非线性影响的肋条位置优化过程中, 肋条位置改变时只需重新计算位移转换矩阵, 避免了网格重构. 本文以全局荷载下单肋条菱形板为例与理论解进行对比, 进行有效性验证. 再以板的中点挠度最小和自振频率最大为优化目标, 对局部荷载作用下不同形状、不同肋条布置方式的加肋板进行优化, 分析方法的收敛性及稳定性.      

Axisymmetric static and dynamics snap-through phenomena in a thermally postbuckled temperature-dependent FGM circular plate

Thermal postbuckling analysis and the axisymmetric static and dynamic snap-through phenomena due to static/sudden uniform lateral pressure in a thermally postbuckled functionally graded material circular plate are performed in this research. Plate is formulated using the first order shear deformation plate theory. Thermo-mechanical properties of the plate are assumed to be temperature dependent where dependency is described according to the higher order Touloukian representation. Two types of temperature loading are considered. Uniform temperature rise and heat conduction across the thickness direction. The one dimensional heat conduction equation in the thickness direction is obtained and discreted via the central finite difference method. The obtained system of equations is nonlinear since the thermal conductivity itself is a function of the unknown nodal temperatures. Using the von-Kármán assumptions, the governing equations of the plate are obtained in a matrix representation with the aid of the conventional Ritz method whose shape functions are developed using the Gram-Schmidt process. At first thermal postbuckling analysis is performed which is a nonlinear problem with respect to both temperature and displacements. Afterwards, response of the bulged thermally postbuckled plate is obtained under the static and dynamic uniform pressure. Snap-through phenomenon may be observed in both static and dynamic loading cases, due to the immovability of the edge of the plate and the initial deflection caused by postbuckling deflection. To capture the snapping phenomenon and trace the path beyond the limit loads, cylindrical arch-length technique is used. In dynamic snap-through analysis, the effect of structural damping is also included. Numerical results of this study reveal that the structure is sensitive to the initial deflection caused by thermal postbuckling load. Increasing the temperature prior to mechanical loads enhances the snap-through intensity and also increases both the upper and lower limit loads. As shown, dynamic snap-through loads are lower than the static ones, however dynamic snap-through intensity is more than the static snap-though intensity. Furthermore, structural damping enhances the dynamic buckling loads of the plate and decreases the dynamic postbuckling deflection of the plate.