旋转SMA纤维混杂复合材料薄壁梁的自由振动

研究具有SMA主动纤维的旋转复合材料单闭室薄壁截面梁的耦合自由振动问题.基于Hamilton原理并结合SMA纤维复合材料薄壁梁的二维截面内力(矩)与位移(转角)关系方程,导出旋转单闭室截面薄壁复合材料梁的1D耦合自由振动分析模型.该模型还考虑薄壁梁调矩角和预锥角的作用.采用Galerkin法求解振动模型,获得梁耦合振动...     

Axial-flexural coupled vibration and buckling of composite beams using sinusoidal shear deformation theory

A finite element model based on sinusoidal shear deformation theory is developed to study vibration and buckling analysis of composite beams with arbitrary lay-ups. This theory satisfies the zero traction boundary conditions on the top and bottom surfaces of beam without using shear correction factors. Besides, it has strong similarity with Euler–Bernoulli beam theory in some aspects such as governing equations, boundary conditions, and stress resultant expressions. By using Hamilton’s principle, governing equations of motion are derived. A displacement-based one-dimensional finite element model is developed to solve the problem. Numerical results for cross-ply and angle-ply composite beams are obtained as special cases and are compared with other solutions available in the literature. A variety of parametric studies are conducted to demonstrate the effect of fiber orientation and modulus ratio on the natural frequencies, critical buckling loads, and load-frequency curves as well as corresponding mode shapes of composite beams.     

Thermal post-buckling and nonlinear vibration analysis of FGM beams based on physical neutral surface and high order shear deformation theory

Thermal post-buckling and nonlinear vibration behaviors of FGM beams are analyzed by using concept of physical neutral surface, von Kármán strain-displacement relationships and high order shear deformation theory. Material properties are assumed to be temperature dependent and vary along the thickness. The prominent character of physical neutral surface higher-order shear deformation beam theory is that stretching-bending couplings are eliminated in constitutive equations, and governing equations have the similar forms as homogeneous isotropic beams. Approximate solutions are given out by Ritz method, and influences played by different supported boundaries, thermal environmental conditions and volume fraction index are discussed in detail.     

纵横载荷作用下功能梯度梁的弯曲和过屈曲

基于一阶非线性梁理论和物理中面概念,导出了纵横向载荷作用下功能梯度材料(FGM)梁非线性弯曲和过屈曲问题的控制方程,并获得了该问题的精确解;据此解研究了梯度材料性质、外载荷、横向剪切变形以及边界条件等因素对功能梯度材料梁非线性力学行为的影响,分析中假设功能梯度材料性质只沿梁厚度方向,并按成分含量的幂指数函数形式变化。结果表明:纵横载荷共同作用下,功能梯度梁的弯曲构形将有无限多个;随着梯度指数的增大,梁的变形减小,临界载荷升高;随着长高比的增大,横向剪切变形的影响减小。     

Bending–stretching analysis of moderately thick functionally graded anisotropic wide beams

This paper presents an analytical solution for static analysis of moderately thick laminated composite wide beams whose fiber orientation angle varies continuously through the thickness direction. Since these anisotropic beams have such a monoclinic stiffness matrix form, the strain components which are ignored for isotropic wide beams must be taken into account. To this end, a refined displacement field taking into account the entire shear strains is used. The equilibrium equations are obtained and solved analytically for beams with different boundary conditions. Stress and displacement components of the functionally graded (FG) beam are obtained, and the effects of FG parameter, boundary condition and length–thickness ratio are studied.     

BUCKING AND FREE VIBRATION OF PIEZOELECTRIC/PIEZOMAGNETIC LAMINATED NANO-BEAM 1)

针对压电/压磁层合纳米梁屈曲、自由振动问题，基于非局部理论与正弦剪切型变形梁理论，建立了力学模型；利用哈密顿原理推导出层合梁运动方程与边界条件；通过数值解法求得层合梁临界屈曲载荷与自由振动频率。对数值结果分析可知：磁电弹夹层对压电/压磁层合纳米梁屈曲和自由振动的影响不能忽略；磁电弹夹层中压电或压磁材料的体积分数和夹层厚度为主要影响因素；分析得到的影响规律可为此类材料在工程中的应用提供理论参考。     

Free vibration analysis of third-order shear deformable composite beams using dynamic stiffness method

The dynamic stiffness method is introduced to investigate the free vibration of laminated composite beams based on a third-order shear deformation theory which accounts for parabolic distribution of the transverse shear strain through the thickness of the beam. The exact dynamic stiffness matrix is found directly from the analytical solutions of the basic governing differential equations of motion. The Poisson effect, shear deformation, rotary inertia, in-plane deformation are considered in the analysis. Application of the derived dynamic stiffness matrix to several particular laminated beams is discussed. The influences of Poisson effect, material anisotropy, slenderness and end condition on the natural frequencies of the beams are investigated. The numerical results are compared with the existing solutions in literature whenever possible to demonstrate and validate the present method.     

剪切流作用下层合梁非线性振动特性研究

针对剪切流中层合梁的大变形非线性振动问题, 采用高阶剪切变形锯齿理论和冯·卡门应变描述层合梁的变形模式和几何非线性效应, 构建了大变形层合梁非线性振动有限元数值模型; 采用基于任意拉格朗日?欧拉方法的有限体积法求解不可压缩黏性流体纳维-斯托克斯方程, 结合层合梁和流体的耦合界面条件建立了剪切流作用下层合梁流固耦合非线性动力学数值模型, 采用分区并行强耦合方法对层合梁的流致非线性振动响应进行了迭代计算. 研究了不同速度分布的剪切流作用下单层梁和多层复合材料梁的振动响应特性, 并验证了本文数值建模方法的有效性. 结果表明: 剪切流作用下单层梁的振动特性与均匀流作用下的情况不同, 梁的运动轨迹受剪切流影响向下偏斜, 随着速度分布系数增加, 尾部流场中的涡结构发生改变; 刚度比对剪切流作用下层合梁的振动特性有显著影响, 随着刚度比的增加, 层合梁振动的振幅增大, 主导频率下降, 运动轨迹由‘8’字形逐渐变得不对称; 发现了不同厚度比和铺层角度情况下, 层合梁存在定点稳定模式、周期极限环振动模式和非周期振动模式三种不同的振动模式, 改变层合梁铺层角度可实现层合梁周期极限环振动模式向非周期振动模式转变.      

Free vibration of functionally graded beams based on both classical and first-order shear deformation beam theories

The free vibration of functionally graded material （FGM） beams is studied based on both the classical and the first-order shear deformation beam theories. The equations of motion for the FGM beams are derived by considering the shear deforma- tion and the axial, transversal, rotational, and axial-rotational coupling inertia forces on the assumption that the material properties vary arbitrarily in the thickness direction. By using the numerical shooting method to solve the eigenvalue problem of the coupled ordinary differential equations with different boundary conditions, the natural frequen- cies of the FGM Timoshenko beams are obtained numerically. In a special case of the classical beam theory, a proportional transformation between the natural frequencies of the FGM and the reference homogenous beams is obtained by using the mathematical similarity between the mathematical formulations. This formula provides a simple and useful approach to evaluate the natural frequencies of the FGM beams without dealing with the tension-bending coupling problem. Approximately, this analogous transition can also be extended to predict the frequencies of the FGM Timoshenko beams. The numerical results obtained by the shooting method and those obtained by the analogous transformation are presented to show the effects of the material gradient, the slenderness ratio, and the boundary conditions on the natural frequencies in detail.     

Vibration of thermally postbuckled carbon nanotube-reinforced composite beams resting on elastic foundations

This paper investigates the small- and large-amplitude vibrations of thermally postbuckled carbon nanotube-reinforced composite (CNTRC) beams resting on elastic foundations. For the CNTRC beams, uniformly distributed (UD) and functionally graded (FG) reinforcements are considered where the temperature-dependent material properties of CNRTC beams are assumed to be graded in the thickness direction and estimated through a micromechanical model. The motion equations are derived based on a higher order shear deformation beam theory with including the beam-foundation interaction. The initial deflection caused by thermal postbuckling is also included. The numerical illustrations concern small- and large-amplitude vibration characteristics of thermally postbuckled CNTRC beams under uniform temperature field. The effects of carbon nanotube (CNT) volume fraction and distribution patterns as well as foundation stiffness on the vibration characteristics of CNTRC beams are examined in detail.     

Nonlinear vibration of functionally graded graphene-reinforced composite laminated beams resting on elastic foundations in thermal environments

Modeling and nonlinear vibration analysis of graphene-reinforced composite (GRC) laminated beams resting on elastic foundations in thermal environments are presented. The graphene reinforcements are assumed to be aligned and are distributed either uniformly or functionally graded of piece-wise type along the thickness of the beam. The motion equations of the beams are based on a higher-order shear deformation beam theory and von Kármán strain displacement relationships. The beam–foundation interaction and thermal effects are also included. The temperature-dependent material properties of GRCs are estimated through a micromechanical model. A two-step perturbation approach is employed to determine the nonlinear-to-linear frequency ratios of GRC laminated beams. Detailed parametric studies are carried out to investigate the effects of material property gradient, temperature variation, stacking sequence as well as the foundation stiffness on the linear and nonlinear vibration characteristics of the GRC laminated beams.     

Free vibration analyses of axially loaded laminated composite beams based on higher-order shear deformation theory

The dynamic stiffness matrix method is introduced to solve exactly the free vibration and buckling problems of axially loaded laminated composite beams with arbitrary lay-ups. The Poisson effect, axial force, extensional deformation, shear deformation and rotary inertia are included in the mathematical formulation. The exact dynamic stiffness matrix is derived from the analytical solutions of the governing differential equations of the composite beams based on third-order shear deformation beam theory. The application of the present method is illustrated by two numerical examples, in which the effects of axial force and boundary condition on the natural frequencies, mode shapes and buckling loads are examined. Comparison of the current results to the existing solutions in the literature demonstrates the accuracy and effectiveness of the present method.     

Dynamic and buckling analysis of polymer hybrid composite beam with variable thickness

This work deals with a study of the dynamic and buckling analysis of polymer hybrid composite(PHC) beam. The beam has variable thickness and is reinforced by carbon nanotubes(CNTs) and nanoclay(NC) simultaneously. The governing equations are derived based on the first shear deformation theory(FSDT). A three-phase HalpinTsai approach is used to predict the mechanical properties of the PHC. We focus our attention on the effect of the simultaneous addition of NC and CNT on the vibration and buckling analysis of the PHC beam with variable thickness. Also a comparison study is done on the sensation of three impressive parameters including CNT, NC weight fractions, and the shape factor of fillers on the mechanical properties of PHC beams,as well as fundamental frequencies of free vibrations and critical buckling load. The results show that the increase of shape factor value, NC, and CNT weight fractions leads to considerable reinforcement in mechanical properties as well as increase of the dimensionless fundamental frequency and buckling load. The variation of CNT weight fraction on elastic modulus is more sensitive rather than shear modulus but the effect of NC weight fraction on elastic and shear moduli is fairly the same. The shape factor values more than the medium level do not affect the mechanical properties.     

Free vibration of axially loaded thin-walled composite Timoshenko beams

Based on shear-deformable beam theory, free vibration of thin-walled composite Timoshenko beams with arbitrary layups under a constant axial force is presented. This model accounts for all the structural coupling coming from material anisotropy. Governing equations for flexural-torsional-shearing coupled vibrations are derived from Hamilton’s principle. The resulting coupling is referred to as sixfold coupled vibrations. A displacement-based one-dimensional finite element model is developed to solve the problem. Numerical results are obtained for thin-walled composite beams to investigate the effects of shear deformation, axial force, fiber angle, modulus ratio on the natural frequencies, corresponding vibration mode shapes and load–frequency interaction curves.     

复合材料叠层梁和金属梁的固有振动特性

对根据三种梁理论得到的金属梁和复合材料叠层梁的固有振动特性进行了对比性的研究对常用的三种梁理论在弹性碰撞分析中的应用进行了分析和比较     

Nonlinear low-velocity impact on damped and matrix-cracked hybrid laminated beams containing carbon nanotube reinforced composite layers

This paper investigates the low-velocity impact response of a shear deformable laminated beam which contains both carbon nanotube reinforced composite (CNTRC) layers and carbon fiber reinforced composite (CFRC) layers. The effect of matrix cracks is considered, and a refined self-consistent model is selected to describe the degraded stiffness caused by the damage. The beam including damping effects rests on a two-parameter elastic foundation in thermal environments. Based on a higher-order shear deformation theory and von Kármán nonlinear strain–displacement relationships, the motion equations of the beam and impactor are established and solved by means of a two-step perturbation approach. The material properties of both CFRC layers and CNTRC layers are assumed to be temperature-dependent. To assess engineering application of this hybrid structure, two conditions for outer CNTRC layers and outer CFRC layers are compared. Besides, the effects of the crack density, volume fraction of carbon nanotube, temperature variation, the foundation stiffness and damping on the nonlinear low-velocity impact behavior of hybrid laminated beams are also discussed in detail.

     

基于修正偶应力和高阶剪切变形理论的变截面微梁的自由振动

基于修正偶应力和高阶剪切理论建立了仅含有一个尺度参数的Reddy变截面微梁的自由振动模型,研究了变截面微梁自由振动问题的尺度效应和横向剪切变形对自振频率计算的影响。基于哈密顿原理推导了动力学方程与边界条件,并采用微分求积法求解了各种边界条件下的自振频率。算例结果表明,基于偶应力理论预测的变截面微梁的自振频率均大于经典梁理论的预测结果,即捕捉到了尺度效应。另外,梁的几何尺寸与尺度参数越接近,尺度效应就越明显,而梁的长细比越小,横向剪切变形对自振频率的影响就越明显。     

General analytical solution to bending of composite laminated beams with delaminations

Based on the first-order shear deformable beam theory, a refined model for composite beams containing a through-the-width delamination is presented, and the deformation at the delamination front is considered. Different from the ordinary delami- nated beam theory, each of the perfectly bonded portions of the new model is constructed as two separated beams along the interface without assuming a plane section at the de- lamination front. The governing equations of the delaminated portions and bonded ones are established, combined with continuity conditions of displacements and internal forces. Solutions of delaminated composite beams with different boundary conditions, delamina- tion locations and sizes axe shown in excellent agreement with the finite element results, showing efficiency and applicability of the present model.     

Nonlinear dynamic analysis of Timoshenko beams by BEM. Part II: applications and validation

In this two-part contribution, a boundary element method is developed for the nonlinear dynamic analysis of beams of arbitrary doubly symmetric simply or multiply connected constant cross section, undergoing moderate large displacements and small deformations under general boundary conditions, taking into account the effects of shear deformation and rotary inertia. In Part I the governing equations of the aforementioned problem have been derived, leading to the formulation of five boundary value problems with respect to the transverse displacements, to the axial displacement and to two stress functions. These problems are numerically solved using the Analog Equation Method, a BEM based method. In this Part II, numerical examples are worked out to illustrate the efficiency, the accuracy and the range of applications of the developed method. Thus, the results obtained from the proposed method are presented as compared with those from both analytical and numerical research efforts from the literature. More specifically, the shear deformation effect in nonlinear free vibration analysis, the influence of geometric nonlinearities in forced vibration analysis, the shear deformation effect in nonlinear forced vibration analysis, the nonlinear dynamic analysis of Timoshenko beams subjected to arbitrary axial and transverse in both directions loading, the free vibration analysis of Timoshenko beams with very flexible boundary conditions and the stability under axial loading (Mathieu problem) are presented and discussed through examples of practical interest.

     

Semi-analytical solution for three-dimensional vibration of thick continuous grading fiber reinforced (CGFR) annular plates on Pasternak elastic foundations with arbitrary boundary conditions on their circular edges

In this paper free vibration of continuous grading fiber reinforced (CGFR) annular plates on an elastic foundation, based on the three-dimensional theory of elasticity, for different boundary conditions at the circular edges is investigated. The foundation is described by the Pasternak or two-parameter model. The CGFR annular plates have an arbitrary variation of fiber volume fraction in the thickness direction. A semi-analytical approach composed of differential quadrature method (DQM) and series solution is adopted to solve the equations of motion. The fast rate of convergence of the method is demonstrated and comparison studies are carried out to establish its very high accuracy and versatility. Some new results for the natural frequencies of the plate are prepared, which include the effects of elastic coefficients of foundation, boundary conditions, material and geometrical parameters. Besides, results for CGFR plate with arbitrary variation of fiber volume fraction in the thickness direction of the plate are compared with discrete laminated composite plate. The main contribution of this work is to present useful results for continuous grading of fiber reinforcement in the thickness direction of a plate on an elastic foundation and comparison with similar discrete laminated composite plate. The interesting and new results show that non-dimensional natural frequency parameters of a functionally graded fiber volume fraction is larger than that of a discrete laminated and close to that of a 2-layer. The new results can be taken as the benchmark solutions for those from numerical methods and future researches.