MODEL SHIFT AND STRANGE ATTRACTOR ON MBIUS STRIP

A new model shift mapping was given in bilateral symbol space. It is topologically conjugate with the traditional shift mapping. Similar to Smale Horseshoe, a model was constructed correspondent to the model shift mapping, i.e., a class of mapping on Mbius strip was given. Its attractors’ structure and dynamical behaviour were described.     

On new chaotic mappings in symbol space

A well known chaotic mapping in symbol space is a shift mapping.However,other chaotic mappings in symbol space exist too.The basic change is to consider the process not only at a set of times which are equally spaced,say at unit time apart(a shift mapping),but at a set of times which are not equally spaced,say if the unit time can not be fixed.The increasing mapping as a generalization of the shift mapping and the k-switch mapping are introduced.The increasing and k-switch mappings are chaotic.     

Dynamics of a quantized circle homeomorphism with quasiperiodic perturbation

We introduce the notion of a quantized circle homeomorphism that is a discontinuous mapping of an interval shift, which is widely used in modern digital radio electronics. For a two-dimensional dynamical system given by a triangular mapping, which is a quantized circle homeomorphism with quasiperiodic perturbation, we prove, under some assumptions, that there exist an invariant absorbing belt and a repulsive contour, study properties of these structures, and get estimates for their sizes. To make the exposition complete, we, first, study the corresponding problems for three less complicated systems, namely, a proper circle homeomorphism, a proper circle homeomorphism with quasiperiodic perturbation, and a quantized circle homeomorphism without perturbation.     

Photoelastic Stress Analysis by Use of Hybrid Technique and Fringe Phase Shifting Method

0Introduction Photoelasticityisanopticalmeasurementmethodforstressanalysis.Itcanperformwhole field measurementduetotwo dimensionalsignalprocessingoflight.Alsoitcanperformnon contact measurementbecauseoftransmissionorreflectionoflightonaspecimen.Photoelast…     

瞬态波作用下非线性岩土与非圆结构的相互作用

本文讨论了瞬态波作用下非线性岩土与非圆结构相互作用的问题。文中引用了一种多参数的非线性弹性岩土模型,应用复变函数方法求解了由小参数摄动展开得到的各阶渐近线性方程,并利用映射函数使计算得到简化。文中给出了瞬态波水平和垂直入射时直墙拱结构动力响应的位移和应力数值结果。     

LARGE RANGE ANALYSIS FOR NONLINEAR DYNAMIC SYSTEMS——ELEMENT MAPPING METHOD

This paper presents a new method for global analysis of nonlinear system. By means of transforming the nonlinear dynamic problems into point mapping forms which are single-valued and continuous, the state space can be regularly divided into a certain number of finitely small triangle elements on which the non-linear mapping can be approximately substituted by the linear mapping given by definition. Hence, the large range distributed problem of the mapping fixed points will be simplified as a process for solving a set of linear equations. Still further, the exact position of the fixed points can be found by the iterative technique. It is convenient to judge the stability of fixed points and the shrinkage zone in the state space by using the deformation matrix of linear mapping. In this paper, the attractive kernel for the stationary fixed points is defined, which makes great advantage for describing the attractive domains of the fixed points. The new method is more convenient and effective than the cell mapping methodl^[1]. And an example for two-dimensional mapping is given.     

LARGE RANGE ANALYSIS FOR NONLINEAR DYNAMIC SYSTEMS——ELEMENT MAPPING METHOD

This paper presents a new method for global analysis of nonlinear system. By means of transforming the nonlinear dynamic problems into point mapping forms which are single-valued and continuous, the state space can be regularly divided into a certain number of finitely small triangle elements on which the non-linear mapping can be approximately substituted by the linear mapping given by definition. Hence, the large range distributed problem of the mapping fixed points will be simplified as a process for solving a set of linear equations. Still further, the exact position of the fixed points can be found by the iterative technique. It is convenient to judge the stability of fixed points and the shrinkage zone in the state space by using the deformation matrix of linear mapping. In this paper, the attractive kernel for the stationary fixed points is defined, which makes great advantage for describing the attractive domains of the fixed points. The new method is more convenient and effective than the cell     

Velocity profile measurement by ultrasonic doppler method

The ultrasonic velocity profile measuring method has been developed at PSI for application in fluid mechanics and fluid flow measurement. It uses pulsed ultrasonic echography together with the detection of the instantaneous Doppler shift frequency. This method has the following advantages over the conventional techniques: (1) an efficient flow mapping process, (2) applicability to opaque liquids, and (3) a record of the spatiotemporal velocity field. After a brief introduction of its principle, the characteristics and specifications of the present system are given. Then examples in fluid engineering for oscillating pipe flow, T-branching flow of mercury, and recirculating flow in a square cavity are described that confirm the method's advantages. Several other works under way by other investigators are introduced. A potential for in-depth study of fluid dynamics is demonstrated by several examples from an investigation of modulated wavy flows in a rotating Couette system. The position-averaged power spectrum and the time-averaged energy spectral density were used to study the dynamic characteristics of the flow, and subsequently the velocity field was decomposed into its intrinsic wave structure based on two-dimensional Fourier analysis.     

Resonant double Hopf bifurcation in a diffusive Ginzburg–Landau model with delayed feedback

We investigate the resonant double Hopf bifurcation in a diffusive complex Ginzburg–Landau model with delayed feedback and phase shift. The conditions for the existence of resonant double Hopf bifurcation are obtained by analyzing the roots’ distribution of the characteristic equation, and a general formula to determine the bifurcation point is given. For the cases of 1:2 and 1:3 resonance, we choose time delay, feedback strength and phase shift as bifurcation parameters and derive the normal forms which are proved to be the same as those in non-resonant cases. The impact of cubic terms on the unfolding types is discussed after obtaining the normal form till 3rd order. By fixing phase shift, we find that varying time delay and feedback strength simultaneously can induce the coexistence of two different periodic solutions, the existence of quasi-periodic solutions and strange attractors. Also, the effects on the existence of transient quasi-periodic solution exerted by the phase shift are illustrated.

     

弹性支承滑动轴承不平衡转子系统非线性动力稳定性和分岔的研究

研究弹性支承滑动轴承不平衡转子系统的稳定性及分岔特性。建立了弹性支承-滑动轴承-转子非线性动力系统的力学模型，在油膜力非线性的情况下，应用数值模拟，采用打靶法计算了刚性转子系统的周期解，并与龙格-库塔法计算的结果进行了对比，依据Floquet理论，分析了周期解的稳定性，再结合龙格-库塔法、Poineare映射法作出了系统运动分岔图。最后，讨论了轴的柔性对转子系统运动稳定性的影响。     

特征向量导数计算各种模态法的比较和发展

在结构动力学修改以及结构动态设计中，灵敏度分析是十分重要的一环，往往也是主要工作量所在。如何在保证精度前提下减少灵敏度分析工作量和计算时间，具有重要意义。本文对特征向量灵敏度分析中计算特征向量导数的模态法作了综合评述，除了经典模态法和修正模态法之外，还对新近发展的迭代模态法和移位模态法进行了介绍。最后通过典型结构实例的计算仿真，对各种模态法作了比较。     

Elxed Point Theorem of Composition g-Contraction Mapping and its Applications

ＩｎｔｒｏｄｕｃｔｉｏｎＭａｎｙｓｔｕｄｉｅｓｈａｖｅｂｅｅｎｄｏｎｅｏｎｃｏｎｔｒａｃｔｉｖｅｍａｐｐｉｎｇｓ,ｅ .ｇ .,Ｒｈｏａｄｅｓ[1]ｍａｄｅａｃｏｍｐａｒｉｓｏｎｏｆｖａｒｉｏｕｓｄｅｆｉｎｉｔｉｏｎｓ (ｍｏｒｅｔｈａｎ 1 0 0ｔｙｐｅｓｖａｒｉｅｄｆｒｏｍ 2 5ｂａｓｉｃｔｙｐｅｓ)ｏｆｃｏｎｔｒａｃｔｉｖｅｍａｐｐｉｎｇｏｎｃｏｍｐｌｅｔｅｍｅｔｒｉｃｓｐａｃｅｉｎ 1 977.Ａｎｄｕｐｔｏｎｏｗ ,ｓｕｃｈｓｔｕｄｙｉｓｓｔｉｌｌｇｏｉｎｇｏｎ ,ｅ .ｇ .,[2 ] .Ｉｎｔｈｉｓｐａｐｅｒ,ｔｈｅｓｅ…     

两级悬浮EMS型磁悬浮控制系统的非线性动力学特性

在考虑二级悬浮弹簧的非线性特性的基础上，建立了两级悬浮EMS型磁悬浮控制系统的非线性动力学模型，给出了控制参数G1，G2的稳定性条件，进一步讨论了该磁悬浮系统在外界激励下的分叉行为及混沌动力特性，并利用Poincare映射，功率谱分析及最大Lyapunov指数等混沌运动的统计特征描述了该状态下控制系统的混沌运动特性。     

Pinpoint calculation of tooth deflection on spur gear by means of method of complex variables in plane elasticity

This paper ineorporated and developed the method originated by AIDA.TERACCHI. and NAGAMUYA. to which a high value is set presently at home andabroad, in which the stress and deflection of tooth on spurgears are calculated by means ofthe method of complex variables in plane elasticity. In this paper, their approximatesolution was developed to become exact solution. The accuracy of the mapping shape oftooth was increased. It was mentioned that the mapping function was expressed by fivefractional terms. with the mapping error being less than 1%m.A calculating principle wasproposed to find out the displacement of contact point in relation to central line of theadjacent gear tooth affecting the quality of mesh of gears directly.The computer programwas made, and according to the computed results.the figures were given so that thedisplacement of the contact point in the normal direction can be calculated conveniently forengineering calculation.     

Calculation of conformal mapping function of the tooth profile on evolvent gear by computer

The exact solution of the stress and the displacement on spur gear can be gained by the method of conformal mapping of complex variables in plane elasticity. But it is difficult to get the comformal mapping function for the tooth profile with different parameters. They used to be obtained through trial method. This is time-consuming and expensive. In this paper a computer program is drawn up for the conformal mapping function. A large amount of calculation has given proof of its success and of the precision of the mapping function: thereby the main obstacle has been removed for the practical application of the conformal mapping method to the stress and displacement of tooth on evolvent gear.     

A theoretical analysis of unsteady incompressible flows for time-dependent constitutive equations based on domain transformations

In this paper, we propose an analysis that allows calculation of kinematic histories in unsteady problems of continuum mechanics, in relation to the use of memory-integral constitutive equations. Such cases particularly concern flow conditions of processing rheology, requiring evaluation of strain or deformation rate tensors, for viscoelastic incompressible fluids as polymers. In two- and three-dimensional cases, we apply concepts of the stream-tube method (STM) initially given for stationary conditions, where unknown local or global mapping functions are defined instead of classic velocity-pressure formulations, leading to consider the flow parameters in domains where the streamlines and trajectories are parallel straight lines. The approach enables us to provide accurate formulae for evaluating the kinematics histories that can be used later for computing the stresses for a given memory-integral model.     

机载惯导两套配置时的故障诊断研究

分析了飞机惯导采用两套配置时对不同故障的诊断方法,主要分为两类:一类是借助两个平台四个加速度计的输出,诊断陀螺慢漂移过大的问题,文中给出了两平台相对转角及其补偿的实现方法;另一类是借助大气数据系统和解析余度的方法,通过建立故障诊断模型,检测两个互不相关惯导系统的故障,文中给出了方案,指出了难点。     

Modeling the effect of liquid movement on the center of gravity calculation of agricultural vehicles

Due to a high center of gravity (CG) location, agricultural vehicles are more vulnerable to overturns. The CG location can be calculated using the lifting axle method of ISO 16231-2:2015. But, as a vehicle is lifted, its liquid payloads are not entirely contained. The liquids will shift both in position and form, affecting the CG height calculation.A mathematical model was developed to predict the effect of liquid movement on the CG height calculation of a tilted vehicle. The model was validated using an agricultural utility tractor and a prototype. The developed model was applied to calculate the CG location considering the effect of the liquid shift.Results showed tilting produced a higher calculated center of gravity due to liquid movement, but by increasing the tilting angle, the calculated CG height decreased. The effect of the liquid shift on CG height measurement for the wagon with 16.0% liquid mass was 14.8% and for the tractor with 1.2% liquid mass was 0.41%. The model error was less than 1.3% for all tests. Considering the effect of the liquid shift in CG height calculation, the error in CG height calculation decreased from 11.9% to 2.6% for the wagon.     

高温条件下混凝土墙体的非线性分析研究

本文建立了一个弹塑性-损伤耦合本构模型用于数值模拟高温下混凝土的真实破坏过程。导出了一个利用Newton-Raphson迭代的一般的直接应力返回映射算法。同时求解应力向量和塑性、损伤的内状态变量。并推导了用于化学-热-湿-力学耦合分析的全局守恒方程Newton-Raphson迭代过程的一致性切线模量矩阵。建议了一个用于弹塑性-损伤耦合分析的两级求解过程。给出的数值例题结果显示了所提出的数法和公式的正确性,表明了所发展的弹塑性-损伤耦合本构模型在模拟高温下混凝土墙体中复杂破坏过程的能力。     

Existence and stability of solutions to inverse variational inequality problems

In this paper, two new existence theorems of solutions to inverse variational and quasi-variational inequality problems are proved using the Fan-Knaster-KuratowskiMazurkiewicz(KKM) theorem and the Kakutani-Fan-Glicksberg fixed point theorem.Upper semicontinuity and lower semicontinuity of the solution mapping and the approximate solution mapping to the parametric inverse variational inequality problem are also discussed under some suitable conditions. An application to a road pricing problem is given.