BASIC EQUATIONS, THEORY AND PRINCIPLE OF COMPUTATIONAL STOCK MARKET (Ⅰ)——BASIC EQUATIONS

This paper studies computational stock market by using network model and similar methodology used in solid mechanics. Four simultaneous basic equations, i.e., equation of interest rate and amount of circulating fund, equations of purchasing and selling of share, equation of changing rate of share price, and equation of interest rate, share price and its changing rate, have been established. Discussions mainly on the solution and its simple applications of the equation of interst rate and amount of circulating fund are given. The discussions also involve the proof of tending to the equilibrium state of network of stock market based on the time discrete form of the equation by using Banach theorem of contraction mapping and the influence of amount of circulating fund with exponential attenuation due to the decreasing of banking interest rate.     

Generalized contraction mapping principle in intuitionistic Menger spaces and application to differential equations

Using the idea of Atanassov, we define the notion of intuitionistic Menger spaces as a netural generalizations of Menger spaces due to Menger. We also obtain a new generalized contraction mapping and utilize this contraction mapping to prove the existance theorems of solutions to differential equations in intuitionistic Menger spaces.     

An iteration method for integral equations arising from axisymmetric loading problems

Let the concentrated forces and the centers of pressure with unknown density functions x(ξ) and y(ξ) respectively be distributed along the axis z outside the solid, then one can reduce an axismmetric loading problem of solids of revolution to two simultaneous Fredholm integral equations. An iteration method for solving such equations is duscussed. A lemma equivalent to E. Rakotch’s contractive mapping theorem and a theorem concerning the convergent proof of the iteration method are presented.     

Boundary-conforming mapping applied to computations of highly deformed solidification interfaces

A new boundary-conforming mapping is developed for the calculation of highly deformed cellular solidification interfaces in a model of directional solidification of a binary alloy. The mapping is derived through a variational fomulation that is designed so that the grid penetrates the grooves between cells along the interface without causing a loss of ellipticity of the mapping equations. A finite element/Newton method is presented for simultaneous solution of the free boundary problem described by the solutal model of directional solidification and the mapping equations. Results are compared to previous calculations and demonstrate the importance of accurate representation of the interface shape for understanding the solution structure.     

On the existence of solutions for equations with accretive mappings in probabilistic normed spaces

The purpose of this paper is to introduce the concept of accretive mapping inprobabilistic normed space(PN space,in short)and to study the existence problem ofsolutions for equations with accretive mappings in PN space and some existence theoremsare shown.     

LARGE RANGE ANALYSIS FOR NONLINEAR DYNAMIC SYSTEMS——ELEMENT MAPPING METHOD

This paper presents a new method for global analysis of nonlinear system. By means of transforming the nonlinear dynamic problems into point mapping forms which are single-valued and continuous, the state space can be regularly divided into a certain number of finitely small triangle elements on which the non-linear mapping can be approximately substituted by the linear mapping given by definition. Hence, the large range distributed problem of the mapping fixed points will be simplified as a process for solving a set of linear equations. Still further, the exact position of the fixed points can be found by the iterative technique. It is convenient to judge the stability of fixed points and the shrinkage zone in the state space by using the deformation matrix of linear mapping. In this paper, the attractive kernel for the stationary fixed points is defined, which makes great advantage for describing the attractive domains of the fixed points. The new method is more convenient and effective than the cell mapping methodl^[1]. And an example for two-dimensional mapping is given.     

MODEL SHIFT AND STRANGE ATTRACTOR ON MBIUS STRIP

A new model shift mapping was given in bilateral symbol space. It is topologically conjugate with the traditional shift mapping. Similar to Smale Horseshoe, a model was constructed correspondent to the model shift mapping, i.e., a class of mapping on Mbius strip was given. Its attractors’ structure and dynamical behaviour were described.     

LARGE RANGE ANALYSIS FOR NONLINEAR DYNAMIC SYSTEMS——ELEMENT MAPPING METHOD

This paper presents a new method for global analysis of nonlinear system. By means of transforming the nonlinear dynamic problems into point mapping forms which are single-valued and continuous, the state space can be regularly divided into a certain number of finitely small triangle elements on which the non-linear mapping can be approximately substituted by the linear mapping given by definition. Hence, the large range distributed problem of the mapping fixed points will be simplified as a process for solving a set of linear equations. Still further, the exact position of the fixed points can be found by the iterative technique. It is convenient to judge the stability of fixed points and the shrinkage zone in the state space by using the deformation matrix of linear mapping. In this paper, the attractive kernel for the stationary fixed points is defined, which makes great advantage for describing the attractive domains of the fixed points. The new method is more convenient and effective than the cell     

非线性动力学系统全局分析之外的胞映射方法新发展

在20世纪80年代由徐皆苏教授创建的胞映射方法一直受非线性科学界同仁的欢迎.近几年胞映射方法有了许多新的应用和算法.本文介绍了一些控制应用和算法的文献.另外,还介绍和讨论胞映射方法应用与多目标优化问题的研究和方法,多目标优化控制设计和非线性代数方程找零解.文中指出胞映射方法在井行计算的帮助下,现在可以解决中等高维空间中的各类问题,新的应用还会不断出现.     

一种求解大型结构动力响应的快速计算方法

针对大型工程结构动力响应求解效率较低的问题,提出了一种基于减基法的快速求解方法。该方法对动力学方程进行时间域积分构建减基空间,利用Galerkin映射向减基空间进行投影得到减缩方程,利用减缩方程快速求得原系统的逼近解,从而大大提高了动力学方程的求解效率。该方法还考虑了Galerkin映射下的奇异性计算,文中算例验证了该...     

Cell mapping methods-beyond global analysis of nonlinear dynamic systems

在20世纪80年代由徐皆苏教授创建的胞映射方法一直受非线性科学界同仁的欢迎.近几年胞映射方法有了许多新的应用和算法.本文介绍了一些控制应用和算法的文献.另外,还介绍和讨论胞映射方法应用与多目标优化问题的研究和方法,多目标优化控制设计和非线性代数方程找零解.文中指出胞映射方法在并行计算的帮助下,现在可以解决中等高维空间中的各类问题,新的应用还会不断出现.     

Quasi-momentum theorem in Riemann-Cartan space

The geometric formulation of motion of the first-order linear homogenous scleronomous nonholonomic system subjected to active forces is studied with the nonholonomic mapping theory. The quasi-Newton law, the quasi-momentum theorem, and the second kind Lagrange equation of dynamical systems are obtained in the Riemann-Cartan configuration spaces. By the nonholonomic mapping, a Euclidean configuration space or a Riemann configuration space of a dynamical system can be mapped into a Riemann-Cartan configuration space with torsion. The differential equations of motion of the dynamical system can be obtained in its Riemann-Cartan configuration space by the quasi-Newton law or the quasi-momentum theorem. For a constrained system, the differential equations of motion in its Riemann-Cartan configuration space may be simpler than the equations in its Euclidean configuration space or its Riemann configuration space. Therefore, the nonholonomic mapping theory can solve some constrained problems, which are difficult to be solved by the traditional analytical mechanics method. Three examples are given to illustrate the effectiveness of the method.     

Fixed point theorems of local contraction mappings on menger spaces

In this paper,we introduce the concept ofε-chainable PM-space,and give severalfixed point theorems of one-valued and multivalued local contraction mapping on the kindof spaces.     

Switched processes generalized mandelbrot sets for complex index number

IntroductionTheMsetgeneratedfromthecomplexmapzz2 +cinthecomplexC_planehasbeenwidelystudiedintherecenttwentyyearsandtheintricateregularstructurehiddeninithasbeenfound ,whichenrichesgreatlythefractaltheory[1].In 1 987and 1 991 ,LakhtakiaandGujar,etal.,respectively ,discussedthegeneralizedMsetsfromthecomplexmappingzza +c(α∈R1)andpresentedseveralconjecturesaboutthevisualstructurecharacteristicsofthegeneralizedMsets[2 ,3].Onthebasisoftheabovefindings,theauthorhastheoreticallyanalyzedthestr…     

On new chaotic mappings in symbol space

A well known chaotic mapping in symbol space is a shift mapping.However,other chaotic mappings in symbol space exist too.The basic change is to consider the process not only at a set of times which are equally spaced,say at unit time apart(a shift mapping),but at a set of times which are not equally spaced,say if the unit time can not be fixed.The increasing mapping as a generalization of the shift mapping and the k-switch mapping are introduced.The increasing and k-switch mappings are chaotic.     

迭代图胞映射方法的快速生成实现

在迭代图胞映射方法的框架下,基于摄动微分多项式的思想讨论了常微分方程的快速求解,将所得结果与迭代图胞映射方法有机结合,有效地解决了迭代图胞映射动力系统的快速生成问题,克服了微分方程动力系统生成迭代图胞映射系统过程中耗时较多、效率低下的不足,大大提高了计算效率。通过对典型非线性系统——杜芬方程的应用分析,证实了该方法的有...     

Dynamic stress concentrations in thick plates with two holes based on refined theory

Based on complex variables and conformal mapping, the elastic wave scat- tering and dynamic stress concentrations in the plates with two holes are studied by the refined dynamic equation of plate bending. The problem to be solved is changed to a set of infinite algebraic equations by an orthogonM function expansion method. As examples, under free boundary conditions, the numerical results of the dynamic moment concen- tration factors in the plates with two circular holes are computed. The results indicate that the parameters such as the incident wave number, the thickness of plates, and the spacing between holes have great effects on the dynamic stress distributions. The results are accurate because the refined equation is derived without any engineering hypothese.     

不规则区域平面问题的条形传递函数方法

对条形传递函数方法进行了改进,提出了映射条形传递函数方法,用于处理非正规形状区域的平面问题。在本文方法中,一个非正规区域被映射成为若干矩形子区域的组合,在这些矩形子区域内划分条形单元,进而建立起位移离散模型。利用变分关系对模型处理,可以得到问题的动态控制方程。应用改进后得到的数值传递函数求解,就可以得到系统的动力、静力响应。文后应用上述方法建立了应用模型并给出了数值算法,结果表明本方法继承了原方法精度高、处理规范、便于求解动态问题等,并成功地应用到了非规则区域的平面问题中。     

Numerical simulation of liquid crystalline polymer flow into two‐dimensional thin cavity moulds

In this paper, flows of liquid crystalline polymers into two‐dimensional thin cavity moulds are simulated. The flows are modelled by Ericksen–Leslie equations of motion in the high viscosity limit. An elliptic pressure equation is derived under Hele–Shaw approximations, and the non‐isothermal natures of the flow are modelled. The equations are solved using the finite‐difference technique. A new boundary‐mapping technique is developed in this study to solve the difficulty in the finite‐difference treatment of arbitrarily shaped boundaries, which possess no natural coordinate system. This new method avoids the difficult mesh control in the body‐fitted mapping process and makes the mapping process easy to implement. It can also solve the problems caused by the uneven distribution of grid nodes in the traditional body‐fitted mapping technique. Copyright © 2008 John Wiley & Sons, Ltd.     

Sloshing simulation of standing wave with time-independent finite difference method for Euler equations

The numerical solutions of standing waves for Euler equations with the nonlinear free surface boundary condition in a two-dimensional(2D) tank are studied.The irregular tank is mapped onto a fixed square domain through proper mapping functions. A staggered mesh system is employed in a 2D tank to calculate the elevation of the transient fluid.A time-independent finite difference method,which is developed by Bang-fuh Chen,is used to solve the Euler equations for incompressible and inviscid fluids.The numer...