Elastic-viscoplastic field at mixed-mode interface crack-tip under compression and shear

For a compression-shear mixed mode interface crack, it is difficult to solve the stress and strain fields considering the material viscosity, the crack-tip singularity, the frictional effect, and the mixed loading level. In this paper, a mechanical model of the dynamic propagation interface crack for the compression-shear mixed mode is proposed using an elastic-viscoplastic constitutive model. The governing equations of propagation crack interface at the crack-tip are given. The numerical analysis is performed for the interface crack of the compression-shear mixed mode by introducing a displacement function and some boundary conditions. The distributed regularities of stress field of the interface crack-tip are discussed with several special parameters. The final results show that the viscosity effect and the frictional contact effect on the crack surface and the mixed-load parameter are important factors in studying the mixed mode interface crack- tip fields. These fields are controlled by the viscosity coefficient, the Mach number, and the singularity exponent.     

压剪载荷作用下界面裂纹尖端场的研究

建立了弹性-幂律蠕变双材料界面裂纹准静态扩展的力学模型，求得了裂纹尖端应力、应变和位移场分离变量形式的解及其数值结果；讨论了材料性能参数对裂纹尖端场的影响；计算和分析了界面裂纹的摩擦效应，并且得出了给定条件下裂尖场的轮廓图形．     

黏弹性体界面裂纹的冲击响应

研究两半无限大黏弹性体界面Griffith裂纹在反平面剪切突出载荷下,裂纹尖端动应力强度因子的时间响应,首先,运用积分变换方法将黏弹性混合黑社会问题化成变换域上的对偶积分方程,通过引入裂纹位错密度函数进一步化成Cauchy型奇异积分方程,运用分片连续函数法数值求解奇异积分方程,得到变换域内的动应力强度因子,再用Laplace积分变换数值反演方法,将变换域的解反演到时间域内,最终求得动应力强度因子的时间响应,并对黏弹性参数的影响进行分析。     

Driving forces and kinking of an oblique crack in bonded nonhomogeneous materials

Summary  Plane elasticity solutions are presented for the problem of an oblique crack in two bonded media. The material model under consideration consists of a homogeneous half-plane with an arbitrarily oriented crack and a nonhomogeneous half-plane. The Fourier integral transform method is employed in conjunction with the coordinate transformations of field variables in the basic elasticity equations. Formulation of the crack problem results in having to solve a system of singular integral equations for arbitrary crack surface tractions. A crack perpendicular to or along the bonded interface between the homogeneous and nonhomogeneous constituents arises as a limiting case. In the numerical results, the values of mixed-mode stress intensity factors are provided for various combinations of relevant geometric and material parameters of the bonded media. Subsequently, the infinitesimal kinks from the tips of a main crack are presumed, with the corresponding local driving forces being evaluated in terms of the stress intensities of the main crack. The criterion of maximum energy release rate is applied with the aim of making some conjectures concerning the likelihood of kinking and the probable kink direction based on the approximation of local homogeneity and brittleness of the crack-tip behavior. Received 25 September 2001; accepted for publication 13 February 2002     

Dynamic behaviors of mode III interfacial crack under a constant loading rate

In an earlier study on intersonic crack propagation, Gao et al. (J. Mech. Phys. Solids 49: 2113–2132, 2001) described molecular dynamics simulations and continuum analysis of the dynamic behaviors of a mode II dominated crack moving along a weak plane under a constant loading rate. The crack was observed to initiate its motion at a critical time after the onset of loading, at which it is rapidly accelerated to the Rayleigh wave speed and propagates at this speed for a finite time interval until an intersonic daughter crack is nucleated at a peak stress at a finite distance ahead of the original crack tip. The present article aims to analyze this behavior for a mode III crack moving along a bi-material interface subject to a constant loading rate. We begin with a crack in an initially stress-free bi-material subject to a steadily increasing stress. The crack initiates its motion at a critical time governed by the Griffith criterion. After crack initiation, two scenarios of crack propagation are investigated: the first one is that the crack moves at a constant subsonic velocity; the second one is that the crack moves at the lower shear wave speed of the two materials. In the first scenario, the shear stress ahead of the crack tip is singular with exponent ?1/2, as expected; in the second scenario, the stress singularity vanishes but a peak stress is found to emerge at a distance ahead of the moving crack tip. In the latter case, a daughter crack supersonic with respect to the softer medium can be expected to emerge ahead of the initial crack once the peak stress reaches the cohesive strength of the interface.     

与两相材料界面接触的裂纹对SH波的散射

利用积分变换方法得出了两相材料中作用简谐集中力时的格林函数．根据所得的格林函数并利用Betti-Rayleigh互易定理得出了与界面接触裂纹的散射波场．裂纹的散射波场可分解为两部分，一部分为奇异的散射场，另一部分为有界的散射场．利用分解后的散射场，可得裂纹在SH波作用下的超奇异积分方程．根据裂纹散射场的奇异部分和Cauchy型奇异积分的性质得出了裂纹和界面接触点处的奇性应力指数和接触点角形域内的奇性应力．利用所得的奇性应力定义了裂纹和界面接触点处的动应力强度因子．对所得超奇异积分方程的数值求解可得裂纹端点和接解点处的应力强度因子。     

Ⅲ型扩展裂纹尖端场渐近解的研究

本文采用弹性-粘塑性模型对反平面剪切扩展裂纹问题进行了研究。文中通过对动态扩展问题和准静态扩展问题的分析得到了各自的渐近解,并且证明了准静态扩展解是动态扩展解的特殊情况,从而使二者统一起来。     

Multiple crack propagation along the interface of a non-homogeneous composite subjected to anti-plane shear loading

The present work concerns with the multiple crack propagation along the interface of two bonded dissimilar strips. The crack faces are subjected to anti-plane shear traction. Galilean transformation is employed to reduce the problem to a quasi-static one. Then, using Fourier transforms and asymptotic analysis, the quasi-static problem is reduced to a pair of singular integral equations. That are solved numerically, using Gauss-Chebyshev integration formulae. The values of the dynamic stress intensity factors are obtained and compared with the previous similar works. Further, a parametric study is introduced to investigate the effect of crack growth rate, geometric and elastic characteristics of the composite on the values of dynamic stress intensity factors.     

基于单元破裂的岩石裂纹扩展模拟方法

传统离散元方法在处理破裂问题时, 采用界面上的准则进行判断, 裂纹只能沿着单元边界扩展. 当物理问题存在宏观或微观裂隙时, 在界面上应用准则具有其合理性; 而裂纹沿着单元边界扩展, 使得裂纹路径受网格影响较大, 扩展方向受到限制. 针对上述情况, 可以基于单元破裂的方式, 构建连续- 非连续单元法, 并应用于岩石裂纹扩展问题的模拟. 该方法在连续计算时, 将单元离散为具有物理意义的弹簧系统, 在局部坐标系下由弹簧特征长度、面积求解单元变形和应力, 通过更新局部坐标系和弹簧特征量, 可进一步计算块体大位移、大转动, 连续问题计算结果与有限元一致, 同时提高了计算效率. 在此基础上, 引入最大拉应力与莫尔—库伦的复合准则, 判断单元破裂状态和破裂方向, 并采用局部块体切割的方式, 在单元内形成初始裂纹. 裂纹两侧相应增加新的计算节点, 同时引入内聚力模型描述裂纹两侧的法向、切向作用与张开度及滑移变形之间的关系. 按此方式, 裂纹尖端处的扩展路径可穿过单元内部和单元边界, 在扩展方向的选取上更为准确. 最后, 通过三点弯曲梁、单切口平板拉伸、双切口试样等典型数值试验, 模拟裂纹在拉伸、压剪等各种应力状态下的扩展问题, 并对岩石单轴压缩试验的破坏过程进行模拟, 分析裂纹形成与应力—应变曲线各阶段之间的对应关系. 结果表明: 连续—非连续单元法通过单元内部破裂的方式, 可以显示模拟裂纹萌生、扩展、贯通直至形成宏观裂缝的过程.      

A moving interface crack between two dissimilar functionally graded piezoelectric layers under electromechanical loading

The dynamic propagation of an interface crack between two dissimilar functionally graded piezoelectric material (FGPM) layers under anti-plane shear is analyzed using the integral transform method. The properties of the FGPM layers vary continuously along the thickness. The properties of the FGPM layers vary differently and the two layers are connected weak-discontinuously. A constant velocity Yoffe-type moving crack is considered. Fourier transform is used to reduce the problem to two sets of dual integral equations, which are then expressed to the Fredholm integral equations of the second kind. Numerical values on the dynamic energy release rate (DERR) are presented for the FGPM to show the effects on the electric loading, gradient of material properties, crack moving velocity, and thickness of layers. Followings are helpful to increase of the resistance of the interface crack propagation of FGPM: (a) certain direction and magnitude of the electric loading; (b) increase of the gradient of material properties; (c) increase of the material properties from the interface to the upper and lower free surface; (d) increase of the thickness of FGPM layer. The DERR increases or decreases with increase of the crack moving velocity.     

Interaction between a compliant disk-shaped inclusion and a crack upon incidence of an elastic wave

The propagation of harmonic elastic wave in an infinite three-dimensional matrix containing an interacting low-rigidity disk-shaped inclusion and a crack. The problem is reduced to a system of boundary integral equations for functions that characterize jumps of displacements on the inclusion and crack. The unknown functions are determined by numerical solution of the system of boundary integral equations. For the symmetric problem, graphs are given of the dynamic stress intensity factors in the vicinity of the circular inclusion and the crack on the wavenumber for different distances between them and different compliance parameters of the inclusion.     

SGBEM modeling of fatigue crack growth in particulate composites

The symmetric-Galerkin boundary element method (SGBEM) has previously been employed to model 2-D crack growth in particulate composites under quasi-static loading conditions. In this paper, an initial attempt is made in extending the simulation technique to analyze the interaction between a growing crack and clusters of perfectly bonded particles in a brittle matrix under cyclic loading conditions. To this end, linear elastic fracture mechanics and no hysteresis are assumed. Of particular interest is the role clusters of inclusions play on the fatigue life of particulate composites. The simulations employ a fatigue crack growth prediction tool based upon the SGBEM for multiregions, a modified quarter-point crack-tip element, the displacement correlation technique for evaluating stress intensity factors, a Paris law for fatigue crack growth rates, and the maximum principal stress criterion for crack-growth direction. The numerical results suggest that this fatigue crack growth prediction tool is as robust as the quasi-static crack growth prediction tool previously developed. The simulations also show a complex interplay between a propagating crack and an inclusion cluster of different densities when it comes to predicting the fatigue life of particulate composites with various volume fractions.     

The scattering of general SH plane wave by interface crack between two dissimilar viscoelastic bodies

The scattering of general SH plane wave by an interface crack between two dissimilar viscoelastic bodies is studied and the dynamic stress intensity factor at the crack-tip is computed. The scattering problem can be decomposed into two problems: one is the reflection and refraction problem of general SH plane waves at perfect interface (with no crack); another is the scattering problem due to the existence of crack. For the first problem, the viscoelastic wave equation, displacement and stress continuity conditions across the interface are used to obtain the shear stress distribution at the interface. For the second problem, the integral transformation method is used to reduce the scattering problem into dual integral equations. Then, the dual integral equations are transformed into the Cauchy singular integral equation of first kind by introduction of the crack dislocation density function. Finally, the singular integral equation is solved by Kurtz's piecewise continuous function method. As a consequence, the crack opening displacement and dynamic stress intensity factor are obtained. At the end of the paper, a numerical example is given. The effects of incident angle, incident frequency and viscoelastic material parameters are analyzed. It is found that there is a frequency region for viscoelastic material within which the viscoelastic effects cannot be ignored. This work was supported by the National Natural Science Foundation of China (No.19772064) and by the project of CAS KJ 951-1-20     

FATIGUE GROWTH MODELING OF MIXED-MODE CRACK IN PLANE ELASTIC MEDIA

This paper presents an extension of a displacement discontinuity method with cracktip elements （a boundary element method） proposed by the author for fatigue crack growth analysis in plane elastic media under mixed-mode conditions. The boundary element method consists of the non-singular displacement discontinuity elements presented by Crouch and Starfield and the crack-tip displacement discontinuity elements due to the author. In the boundary element implementation the left or right crack-tip element is placed locally at the corresponding left or right crack tip on top of the non-singular displacement discontinuity elements that cover the entire crack surface and the other boundaries. Crack growth is simulated with an incremental crack extension analysis based on the maximum circumferential stress criterion. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not required because of an intrinsic feature of the numerical approach. Crack growth is modeled by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characteristics of some related elements are adjusted according to the manner in which the boundary element method is implemented. As an example, the fatigue growth process of cracks emanating from a circular hole in a plane elastic plate is simulated using the numerical simulation approach.     

动载下裂纹应力强度因子计算的改进型扩展有限元法

相较于常规扩展有限元法(extended finite element method, XFEM), 改进型扩展有限元法(improved XFEM) 解决了现有方法线性相关与总体刚度矩阵高度病态问题, 在数量级上提升了总体方程的求解效率, 克服了现有方法在动力学问题中的能量正确传递、动态应力强度因子数值震荡、精度低下问题. 本文基于改进型XFEM, 采用Newmark 隐式时间积分算法, 重点研究了动载荷作用下扩展裂纹尖端应力强度因子的求解方法, 与静力学方法相比, 增加了裂纹扩展速度项与惯性项的贡献. 通过数值算例研究了网格单元尺寸、质量矩阵、时间步长、裂尖加强区域、惯性项、扩展速度项及相互作用积分区域J-domain的网格与单元尺寸对动态应力强度因子求解精度的影响, 验证了改进型XFEM计算动态裂纹应力强度因子方法的有效性. 针对文献中具有挑战性的 "I 型半无限长裂纹先稳定后扩展"问题, 改进型XFEM给出目前为止精度最好的动态应力强度因子数值解.      

Modelling of dynamical crack propagation using time-domain boundary integral equations

We study dynamic antiplane cracks in the time domain by the boundary integral equation method (BIEM) based on the integral equation for displacement discontinuity (or crack opening displacement, COD) as a function of stress on the crack. This displacement discontinuity formulation presents the advantage, with respect to methods developed by Das and others in seismology, that it has to be solved only inside the crack. This BIEM is, however, difficult to implement numerically because of the hypersingularity of the kernel of the integral equation. Hence it is rewritten into a weakly singular form using a regularization technique proposed by Bonnet. The first step, following a method due to Sladek and Sladek, consists in converting the hypersingular integral equation for the displacement discontinuity into an integral equation for the displacement discontinuity and its tangential derivatives (dislocation density distribution); the latter involves a Cauchy type singular kernel. The second step is based on the observation that the hypersingularity is related to the static component of the kernel; the static singularity is then isolated and can be expressed in terms of weakly singular integrals using a result due to Bonnet. Although numerical applications discussed in this paper are all for the antiplane problem, the technique can be applied as well to in-plane crack dynamics.

The BIEM is implemented numerically using continuous linear space-time base functions to model the COD on the crack. In the present scheme the COD gradient interpolation is discontinuous at the element nodes while the integral equations are collocated at the element midpoints. This leads to an overdetermined discrete problem which is solved by standard least-squares methods. We use the dynamic BIEM to study a set of problems that appear in earthquake source dynamics, including the spontaneous dynamic crack propagation for a very simple rupture criterion. The numerical results compare favorably with the few exact solutions that are available. Then we demonstrate that difficulties experienced with finite difference simulations of spontaneous crack dynamics can be removed with the use of BIEM. The results are improved by the use of singular crack tip elements.     

Analysis of stress intensity factor in orthotropic bi-material mixed interface crack

Adopting the complex function approach, the paper studies the stress intensity factor in orthotropic bi-material interface cracks under mixed loads. With consideration of the boundary conditions, a new stress function is introduced to transform the problem of bi-material interface crack into a boundary value problem of partial differential equations. Two sets of non-homogeneous linear equations with 16 unknowns are constructed. By solving the equations, the expressions for the real bi-material elastic constant εt and the real stress singularity exponents λt are obtained with the bi-material engineering parameters satisfying certain conditions. By the uniqueness theorem of limit,undetermined coefficients are determined, and thus the bi-material stress intensity factor in mixed cracks is obtained. The bi-material stress intensity factor characterizes features of mixed cracks. When orthotropic bi-materials are of the same material, the degenerate solution to the stress intensity factor in mixed bi-material interface cracks is in complete agreement with the present classic conclusion. The relationship between the bi-material stress intensity factor and the ratio of bi-material shear modulus and the relationship between the bi-material stress intensity factor and the ratio of bi-material Young's modulus are given in the numerical analysis.     

I型定常扩展裂纹尖端的弹黏塑性场

考虑材料在扩展裂纹尖端的黏性效应，假设黏性系数与塑性应变率的幂次成反比，对幂硬化材料中平面应变扩展裂纹尖端场进行了弹黏塑性渐近分析，得到了不含间断的连续解，并讨论了I型裂纹数值解的性质随各参数的变化规律. 分析表明应力和应变均具有幂奇异性，并且只有在线性硬化时，尖端场的弹、黏、塑性才可以合理匹配. 对于I型裂纹，裂尖场不含弹性卸载区. 当裂纹扩展速度趋于零时，动态解趋于准静态解，表明准静态解是动态解的特殊形式；如果进一步考虑硬化系数为零的极限情况，便可退化为Hui和Riedel的非线性黏弹性解.     

Singularities in 2D anisotropic potential problems in multi-material corners: Real variable approach

An analysis of singular solutions at corners consisting of several different homogeneous wedges is presented for anisotropic potential theory in plane. The concept of transfer matrix is applied for a singularity analysis first of single wedge problems and then of multi-material corner problems. Explicit forms of eigenequations for evaluation of singularity exponent in the case of multi-material corners are derived both for all combinations of homogeneous Neumann and Dirichlet boundary conditions at faces of open corners and for multi-material planes with singular interior points. Perfect transmission conditions at wedge interfaces are considered in both cases. It is proved that singularity exponents are real for open anisotropic multi-material corners, and a sufficient condition for the singularity exponents to be real for anisotropic multi-material planes is deduced. A case of a complex singularity exponent for an anisotropic multi-material plane is reported, apparently for the first time in potential theory. Simple expressions of eigenequations are presented first for open bi-material corners and bi-material planes and second for a crack terminating at a bi-material interface, as examples of application of the theory developed here. Analytical solutions of these eigenequations are presented for interface cracks with any combination of homogeneous boundary conditions along the interface crack faces, and also for a special case of a crack perpendicular to a bi-material interface. A numerical study of variation of the singularity exponent as a function of inclination of a crack terminating at a bi-material interface is presented.     

A Long Crack Penetrating a Circular Inhomogeneity

This paper presents the effects of elastic mismatch and crack-tip position on the stress intensity factors of a long crack penetrating a circular inhomogeneity. The analysis relies on closed-form solutions, derived using complex variable techniques, for the stresses and displacements produced by dislocations positioned inside and outside the inhomogeneity. Dislocation distributions are introduced to express the traction boundary condition along the crack surfaces as a system of singular integral equations, whose solution is obtained through a numerical procedure. It is shown that if the elastic mismatch is interpreted correctly, then the stress intensity factors of this micromechanical model are very good approximations to those computed using a Monte Carlo finite element model of a long crack in a polycrystalline plate with compliant grain boundaries.