转动压电陶瓷体表面声波的存在性及波速特征关系

对转动半无限压电陶瓷体的表面声波给出了存在性证明及其条件。结果表明：对应于不转动时的Rayleigh表面声波与Bleustein-Gulyaev表面声波在转动情形是否仍为表面波有赖于压电体的材料参数;如果转动时表面声波存在,则这些表面声波是色散的。最后,以PZT-5H压电陶瓷材料为例定量给出了波速-转动角速度的特征曲线。     

DYNAMIC BEHAVIOR OF TWO COLLINEAR PERMEABLE CRACKS IN A PIEZOELECTRIC LAYER BONDED TO TWO HALF SPACES

IntroductionIn the fracture mechanics studies for piezoelectric materials,differently electricboundary conditions at the crack surfaces have been proposed by many researchers.Forexample,for the sake of analytical simplification,the assumption that the cra…     

PVDF压电计在低阻抗介质动态力学性能测试中的应用

介绍了ＰＶＤＦ的压电特性,讨论了用ＰＶＤＦ测试材料动态应力应变曲线的实验方法和数据处理方法,并以聚氨酯泡沫塑料为例,说明了它在对低阻抗介质的动态测试中避开了常规Ｈｏｐ ｋｉｎｓｏｎ压杆方法的难处且实验结果具有更高的精确度。     

On vibration mitigation and energy harvesting of a non-ideal system with autoparametric vibration absorber system

This paper demonstrates that vibration mitigation and energy harvesting can be achieved simultaneously by using of an electricity-generating from autoparametric vibration absorber system (AVAS) and non-ideal system (NIS). The NIS consists of a simple portal frame excited by a small dc motor with eccentric mass, with limited power supply and located on the top. The AVAS consists of a cantilever beam with tip mass parallel coupled to NIS. A piezoelectric material is considered for energy harvesting installed in the base of the AVAS and an electric circuit is connected to the piezoelectric material in order to produce voltage output. Several numerical simulations were carried out focusing on the passage through the resonance of NIS, when the motor rotational frequency is near the portal frame natural frequency and when the non-ideal subsystem frequency is approximately twice the absorber beam frequency (two-to-one internal resonance). The results showed the existence of Sommerfeld effect in NIS and saturation phenomenon in the NIS–AVAS.     

Complete band gaps in two-dimensional piezoelectric phononic crystals with {1–3} connectivity family

In this paper, we present results of full band structures for two-dimensional piezoelectric phononic crystals with {1–3} connectivity family. The plane-wave-expansion (PWE) method is applied to the theoretical derivation of secular equations of the two polarization modes: a transverse polarization mode and a mixed (longitudinal-transverse) polarization mode. And the band structures of the two modes for both the case of piezoelectric rods embedded in a polymer matrix and the case of polymer rods embedded in a piezoelectric matrix are calculated for two different cross-sections of the rods, i.e., circular and square, considering the practical fabrication of phononic crystals. We reveal the existence of several very large complete band gaps in a material of practical interest such as PZT rods reinforced polythene composite. The effects of shapes and filling fraction of the rods on band gaps are discussed in detail. The existence of these gaps in relation to the physical parameters of the constituent materials involved is studied. Understanding the band structures of piezoelectric phononic crystals can give some information for improvements in the design of acoustic transducers.     

Exact solution of a flat smooth punch on a piezoelectric half plane

This paper derives an exact solution for a flat smooth punch applied on a piezoelectric half plane. The piezoelectric solid occupies the lower half plane, and a flat rigid punch is applied on it. As the permittivity of the air (environment) is far less than that of the piezoelectric material, the electric induction of air may be neglected. The permittivity of the punch is also far less than that of the piezoelectric material and consequently the normal component of the electric displacement vanishes at the contact boundary. The exact solution is obtained by eigen-function representation and analytic continuation. The distribution of pressure under the punch has been found. The electric field along the surface of the lower half plane is extracted in a closed form.     

Multiple scattering of electro-elastic waves from a buried cavity in a functionally graded piezoelectric material layer

This paper presents a theoretical method to investigate the multiple scattering of electro-elastic waves and the dynamic stress around a buried cavity in a functionally graded piezoelectric material layer bonded to a homogeneous piezoelectric material. The analytical solutions of wave fields are expressed by employing wave function expansion method, and the expanded mode coefficients are determined by satisfying the boundary conditions around the cavity. The image method is used to satisfy the mechanical and electrically short conditions at the free surface of the structure. According to the analytical expression of this problem, the numerical solutions of the dynamic stress concentration factor around the cavity are presented. The effects of the piezoelectric property, the position of the cavity in the layer, the incident wave number and the material properties on the dynamic stress around the cavity are analyzed. Analyses show that the piezoelectric property has great effect on the dynamic stress in the region of higher frequencies, and the effect increases with the decrease of the thickness of FGPM layer. If the material properties of the homogeneous piezoelectric material are greater than those at the surface of the structure, the dynamic stress resulting from the piezoelectric property is greater. The effect material properties at the two boundaries of FGPM layer on the distribution of dynamic stress around the cavity is also examined.     

Propagation of slip pulse along frictionless contact interface with local separation between two piezoelectric solids

The Stroh formalism of piezoelectric materials,Fourier analysis and singular integral equation technique were used to investigate the existence of a pulse at the fric- tionless interface in presence of local separation between two contact piezoelectric solids. The two solids were combined together by uniaxial tractions and laid in the electric field. The problem was cast into a set of Cauchy singular integral equations,from which the closed-form solutions were derived.The numerical discussion on the existence of such a slip pulse was presented.The results show that such a slip pulse,which has square root singularities at both ends of the local separation zone,can propagate in most material combinations.And the existence of such a slip pulse will not be affected by the applied mechanical and electric fields in some special material combinations.     

On the screw dislocation in a functionally graded piezoelectric plane and half-plane

In this paper closed-form expressions of the electroelastic field induced by a piezoelectric screw dislocation in a functionally graded piezoelectric plane and half-plane are derived. The material properties are assumed to vary exponentially along the x and y-directions. The solution for a screw dislocation in a functionally graded piezoelectric plane is obtained through introduction of two generalized stress functions. The solution for a screw dislocation in a functionally graded piezoelectric half-plane is derived by using the method of image. It is also found that the interaction between a piezoelectric screw dislocation and a circular insulating hole in the functionally graded piezoelectric material can be solved by using series expansion method.     

Generalized Bleustein-Gulyaev type waves in layered porous piezoceramic structure

The propagation of a Bleustein-Gulyaev (B-G) type wave in a structure consisting of multiple layers and a half-space of porous piezoelectric materials is theoretically studied. The solutions of the problem in terms of the mechanical displacements and electric potential functions are obtained for each layer and the half-space. The dispersion equation is obtained for electrically open and shorted boundary conditions by use of the transfer matrix method. A peculiar kind of B-G waves is investigated, which can propagate only in the layer over the half-space. The relationship between the piezoelectric constants and the dielectric constants is found for the existence of a peculiar kind of propagation modes. The numerical results in terms of the phase velocity and the electromechanical coupling factor with different thicknesses of the layer stack are presented.     

Surface effect on Bleustein-Gulyaev wave in a piezoelectric half-space

Surface effect, which is attributed to the different environment surrounding the surface or near-surface atoms from that embracing the bulk atoms, may become significant when the surface-to-volume ratio of a body is large. This paper considers the effect of a plane boundary of a piezoelectric body modeled as a thin layer with specified material properties, for which a transfer relation between the state vectors at the top and bottom surfaces is derived based on the state-space formulations. The equations of surface piezoelectricity for different orders without any bias field are then presented by making use of the power series expression of the transfer matrix. The surface effect is demonstrated by considering the Bleustein-Gulyaev wave existing in a horizontally polarized piezoceramic half-space.     

不均匀磁电弹板中的厚度扭曲波的传播

压电-压磁复合材料或结构的许多应用是与弹性波的传播密切相关的,这要求人们首先从理论的角度弄清楚弹性波的传播规律。本文研究由多个不均匀磁电弹介质组成的薄板厚度扭曲波的传播性质,从磁电弹全耦合场三维方程出发得到了其精确解,根据所得到的解分析了波的传播特征,这些结果对于理解和设计谐振器、滤波器以及声波元件提供了有价值的理论基础。     

Theoretical transient analysis and wave propagation of piezoelectric bi-materials

The transient response of piezoelectric bi-materials subjected to a dynamic anti-plane concentrated force or electric charge with perfectly bonded interface is examined in the present study. The problem is solved by using the Laplace transform method and the inverse Laplace transform is evaluated by means of Cagniard’s method. Exact transient full-field solutions of the contribution for each wave are expressed in explicit closed forms. The transient behavior of field quantities is examined in detail by numerical calculations. The existence condition of a propagating surface wave along the interface is discussed in detail. A surface wave can be guided by the interface of two semi-infinite materials in contact if one, at least, of these two materials is piezoelectric. The propagation velocity of the surface wave is explicitly expressed and is found to be less than the lower shear wave velocity of the two materials. The existence of the surface wave for piezoelectric–piezoelectric bi-materials is restricted to the situation that the shear waves of the two piezoelectric materials are very close. The possibility for the existence of the surface wave for piezoelectric–elastic bi-materials is much greater than that of the piezoelectric–piezoelectric bi-materials.     

Two-dimensional electroelastic fundamental solutions for general anisotropic piezoelectric media

I.IntroductionDuetotheirintrinsiccouplingeffectbetweenmechanicalandelectricalfields,piezoelectricmaterialshavebeenwidelyusedintechnologyastransducersandsensorsand,morerecently,asactuatorsinsmartstructures.lnordertooptimizetheirmicrostructuresandunderstand…     

Stress singularities near the apex of a cylindrically polarized piezoelectric wedge

Summary In this paper, the stress singularities for a cylindrically polarized piezoelectric wedge are investigated. The characteristic equations are derived analytically by using the extended Lekhnitskii formulation. The piezoelectric material (PZT-4) is polarized in the radial, circular or axial direction, respectively. Similar to the rectilinearly polarized piezoelectric problem, the inplane and antiplane stress fields are uncoupled. The results show the variations of the singularity orders with the changes of the wedge angle, material constants, polarized direction, and the boundary conditions.     

梁板结构埋入压电片的深度和厚度优化研究

根据梁的弯曲变形理论，以及压电材料的压电效应，对压电复合材料梁结构的应变和应力状态进行了分析。推导了压电材料埋入梁结构时其埋入深度和压电材料本身厚度的优化目标函数。根据优化目标函数，绘制出了在给定的基体材料和压电材料弹性模量比之下，压电材料的驱动力矩随埋入深度和压电材料厚度变化的三维曲面和等高线图，直观地表示出了埋入型压电材料智能结构获得最佳驱动力矩的配置方案。同时也分析了结构和压电材料两者的弹性模量之比对其结果的影响。结果表明，压电材料对于结构的作动力矩与其埋入基体材料的深度、本身厚度以及基体材料和压电材料的弹性模量之比都有着密切的联系。同时将结果也推广到了压电板结构，此时压电材料和基体材料的泊松比时其结果也有一定的影响。     

Periodic cracks in a functionally graded piezoelectric layer bonded to a piezoelectric half-plane

Studied is the problem of a periodic array of cracks in a functionally graded piezoelectric strip bonded to a homogeneous piezoelectric material. The properties of the functionally graded piezoelectric strip, such as elastic modulus, piezoelectric constant and dielectric constant, are assumed in exponential forms and vary along the crack direction. The crack surface condition is assumed to be electrically impermeable or permeable. Integral transform and dislocation density functions are employed to reduce the problem to the solution of a system of singular integral equations. The effects of the periodic crack spacing, material constants and the geometry parameters on the stress intensity factor, the energy release ratio and the energy density factor are studied.     

Anti-plane waves near an interface between two piezoelectric half-spaces

We show the existence of certain new waves that can propagate near an interface between two half-spaces of different piezoelectric ceramics, where the interface is modeled by a membrane with the surface/interface elasticity [1]. The current configuration can be reduced into a number of well-known results as special cases, such as Love wave, Bleustein and Gulyaev wave. Together with our previous work for the imperfect interface [2], a full range of consideration of the interface affecting the anti-plane waves is now completed.     

旋转功能梯度智能结构的刚-柔耦合动力学分析

基于一次耦合模型理论建立了中心刚体-压电层-功能梯度材料智能梁系统的刚柔耦合动力学模型．研究了开环状态下将压电材料作为传感器的压电效应和质量刚度效应对系统动力学特性的影响．通过仿真算例与另两种不同建模理论（传统零次近似耦合模型、一次近似耦合模型）作了对比．随着中心刚体外驱动力矩的增大,零次近似耦合模型和一次近似耦合模型计算结果逐渐发散,而本文的一次耦合模型的计算结果始终保持收敛,较其他近似耦合模型具有一定优势．对三种不同的结构的计算结果表明,压电材料的压电效应对系统的动力学特性影响显著,压电材料的质量刚度效应也会影响智能梁的动力学行为,前者比后者的影响大得多．此外,功能梯度材料功能梯度指数对系统动力学特性的影响也较大．     

Surface electro-elastic Love waves in a layered structure with a piezoelectric substrate and two isotropic layers

Propagation of electro-elastic surface Love waves in a structure consisting of a piezoelectric half-space substrate of crystal class 6, 4, 6 mm or 4 mm and two layers, one of which (adjacent to the substrate) is a conducting material and the second is either a conducting or a dielectric material, is considered. The mathematical model obtained includes all the above crystal classes i.e. the surface wave problems related to all these classes are presented in a single mathematical model. The dispersion equation for the existence of Love surface waves with respect to phase velocity is obtained. Numerical calculations are carried out for three different layered structures. The effect of the second layer on the propagation behaviour of the surface Love wave in the structure is revealed.