弱耦合光纤光栅外腔半导体激光器

报道作者对单频窄宽光纤光栅外腔半导体激光器的一些研究结果。理论上分析了外腔的引入对激光器的阈值增益和光谱线宽的影响，实验上用自行研制的光纤布拉格反射滤波器（ＦＢＲ）与普通多纵模半导体激光耦合，在１．５５μｍ波段，得到边模抑制比大于２５ｄＢ，线宽小于６０ｋＨｚ的激光输出。     

光纤光栅对FBG-ECL静态特性的影响

光纤光栅外腔半导体激光器(FBG-ECL)在未来光通信系统占有着越来越重要的地位。根据FBG-ECL的等效腔模型,讨论了光纤光栅反射率、带宽对FBG-ECL的输出功率,阈值特性、边模抑制比等静态特性的影响。指出了存在最佳光纤光栅峰值反射率,不仅使得FBG-ECL具有更高的输出功率,而且可以获得极好的边模抑制比。最后根据实测在不同反射率下外腔激光器的激射光谱,发现理论分析结果和实验数据是吻合的。     

全光纤色散腔掺铒光纤激光器

报道用９７１ｎｍ半导体激光器泵浦的掺铒光纤激光器的一些实验研究结果。演示了由光纤环反射器和光纤光栅构成的全光纤色散掺铒光纤激光器，在１．５５μｍ波段获得了线宽小于０．０５ｎｍ的激光输出。     

紫外写入光纤光栅应变传感特性研究

采用紫外写入光纤Ｂｒａｇｇ光栅研究其应变传感特性。光纤光栅要借助外界应力引起轴向应变和折射率变化造成光栅Ｂｒａｇｇ反射波长移动。在温度２０℃,利用波长在４００￣１８００ｎｍ范围色散的光谱仪并用ＩｎＧａＡｓＰ／ＩｎＰ ＥＬＤ作宽带光源,从实验上测量了光纤光栅的应变与Ｂｒａｇｇ反射波长间的关系,结果表明Ｂｒａｇｇ反波长移动与光纤光栅外界应力变化在１５５．４￣１５６．８ｎｍ波长范围呈线性。外界应力引起的     

多模光纤光栅温度传感特性的实验研究

利用氢敏化处理的多模光纤制作了多模光纤光栅,并对多模光纤光栅的温度传感特性进行了实验研究与理论分析,表明这种光栅三个反射峰的布拉格波长随温度变化均呈现出良好的线性关系,并且重复性相当好,同一光栅的各反射峰的理论温度灵敏度系数都等于0．01nm／℃,实验测得的温度灵敏度系数为0．0098nm／℃或0．0099nm／℃,与理论分析相当吻合,这些特性与单模光纤光栅的温度传感特性接近相同。因此可以用多模光纤光栅代替单模光纤光栅开发光纤光栅传感器,以降低成本;这一实验结果还可以作为对多模光纤光栅进一步深入研究的参考。     

半导体激光器与光纤光栅对接耦合研究

半导体激光器管芯与光纤光栅的对接耦合对光纤光栅外腔激光器的特性起到关键作用。利用散射矩阵分析了激光器管芯与光纤光栅外腔的对接耦合，发现对接的距离以及对接的耦合效率决定了光纤光栅外腔激光器的性能。在强反馈情况下,激射波长在光纤光栅外腔有效反射率决定的布喇格波长内随对接耦合距离周期性的变化,对弱反馈情况则有些不同。同时对比了两种情况的边模抑制比。该分析为实际制作器件提供了指导。     

高能激光辐照下光纤布拉格光栅响应特性

为探索光纤布拉格光栅在高能激光参数测量方面的应用,通过实验和数值模拟研究分析了其在高能激光辐照下的响应特性。通过解传热方程,获得了光纤布拉格光栅在高能激光辐照下的热响应特性。利用一个光纤光栅解调仪,记录了光纤布拉格光栅在高能激光辐照下的波长漂移现象。实验结果表明：在一定的功率密度范围内,光纤布拉格光栅的最大波长漂移与其所受的辐照功率密度成线性关系,该结果与理论模拟相符。     

双波长工作的光纤光栅外腔半导体激光器

本文利用多波长光纤布拉格光栅与端面镀有增透膜的半导体激光器管芯耦合形成外腔激光器。研究了不同光纤光栅布拉格波长间隔下,器件的工作性能。当光纤光栅波长间隔不同于管芯的FP腔模式间隔时,不能得到稳定的多波长输出。通过调整光纤栅的各个布拉格波长间隔,使之和半导体激光器FP模式间距相同时,得到了输出稳定的双波长激光。     

一种测定光纤光栅布拉格反射波长位移的简单方法

报道一种简单的光纤光栅对参考法测定光纤光栅布拉格波长的位移的方法，其原理是利用一个布拉格波长可调谐的光纤光栅去跟踪另一个光纤光栅拉格波长的变化，测得的光栅布拉格波长的温度灵敏度为０．００８８ｎｍ／℃，这和用可调谐半导体激光器测得的结果十分接近。     

光纤光栅中孤子时延特性研究

从光纤光栅慢光产生的物理机理和非线性耦合模方程组,仿真分析了均匀布拉格光栅中光栅孤子传输时的减速特性;利用高速示波器搭建了测量高能量、窄脉冲通过布拉格光纤光栅后时延特性的实验系统,分别测量了由普通单模光纤和高非线性光纤制作的均匀光栅对光脉冲的时延特性.实验结果为:用5 cm长普通单模光纤制作的布拉格光栅可以使在其中传输...     

Numerical Analysis of Highly Birefringent Photonic Crystal Fibers with Bragg Reflectors

We analyze theoretically the coupling properties of Bragg gratings written in highly birefringent photonic crystal fibers with doped core and show how they can be tuned by the parameters of a microstructured fiber. We apply the coupled mode theory combined with a fully vectorial mode solver based on the plane-wave method. The results indicate large differences in interaction with the grating for the two linearly polarized fundamental modes. We show fiber designs, which provide single-mode operation with high birefringence and at the same time a high coupling efficiency of the grating. Such features can be used in fiber sensors, fiber laser configurations or to introduce a polarization dependent feedback in a long external cavity system with a semiconductor laser.     

Fiber laser with combined feedback of core and cladding modes assisted by an intracavity long-period grating

We present a fiber laser made in a single piece of conventional doped-core fiber that operates by combined feedback of the fundamental core mode LP((0,1)) and the high-order cladding mode LP((0,10)). The laser is an all-fiber structure that uses two fiber Bragg gratings and a long-period grating to select the modes circulating in the cavity; the laser emits at the coupling wavelength between the core mode LP((0,1)) and the counterpropagating cladding mode LP((0,10)) in the Bragg gratings. This work demonstrates the feasibility of high-order mode fiber lasers assisted by long-period gratings.     

Single-mode fiber laser based on core-cladding mode conversion

A single-mode fiber laser based on an intracavity core-cladding mode conversion is demonstrated. The fiber laser consists of an Er-doped active fiber and two fiber Bragg gratings. One Bragg grating is a core-cladding mode converter, and the other Bragg grating is a narrowband high reflector that selects the lasing wavelength. Coupling a single core mode and a single cladding mode by the grating mode converter, the laser operates as a hybrid single-mode laser. This approach for designing a laser cavity provides a much larger mode area than conventional large-mode-area step-index fibers.     

波长可调谐取样光纤光栅激光器的输出特性研究

建立了具有两个取样周期略有不同的取样光纤光栅反射镜的Vernier波长调谐机制的光纤分布布拉格反射式激光器的数值仿真模型,对激光器的输出特性进行了分析. 研究了激光器输出特性随着激光器前后光栅反射镜波长以及前后光栅反射镜反射率的变化关系. 提出了对两取样光栅反射率的优化配置方案,可以使输出激光的边模抑制比有所提高;同时对波长调节方式也进行了探讨;进行了实验研究. 关键词： 取样光纤光栅 光纤激光器 波长可调谐激光器     

基于级联光纤Bragg光栅的外腔半导体激光器三波长同时激射

实现了使用3个级联的光纤Bragg光栅外腔半导体激光器3波长同时激射.3条谱线的峰值波长取决于光纤Bragg光栅的峰值反射波长,分别为1 531.5 nm、1 549.4 nm与1 554.8 nm.注入电流为52 mA时,激光器总输出功率为1 mW.该激光器的主要优点包括,由于输出波长被锁定在光纤Bragg光栅的Bragg波长上,因此输出波长稳定,谱线窄,成本低.可应用于多波长干涉测量以及全光通信等领域中.     

Switchable dual-wavelength passively mode-locked fiber ring laser using SESAM and cascaded fiber Bragg gratings

We propose and demonstrate an efficient and simple wavelength switchable dual-wavelength passively mode-locked fiber ring laser based on a semiconductor saturable absorber mirror (SESAM) and a cascaded sequence of fiber Bragg gratings (FBGs). The efficient self-starting mode-locked operation was realized with a SESAM. Dual-wavelength pulses with a wavelength spacing of 12.49 nm were obtained which was determined by the reflection peaks of the FBGs used in the experiment. In addition, by rotating the polarization controllers (PCs), the switchable dual-wavelength operation was simply achieved via exploiting wavelength-dependent loss mechanism.     

Wavelength spacing tunable dual-wavelength single-longitudinal-mode fiber ring laser based on fiber Bragg gratings

A wavelength spacing tunable dual-wavelength single-longitudinal-mode fiber ring laser is presented by employing separated fiber Bragg gratings. By using a saturable-absorption-induced grating filter and a hybrid gain medium formed by a semiconductor optical amplifier and an erbium-doped fiber amplifier, stable single-longitudinal-mode lasing is achieved at room temperature. Wavelength spacing of the proposed fiber laser can be tuned in a range from 0.1 to 1.3 nm.     

Semiconductor optical amplifier-based laser with 25 km long cavity length utilizing sagnac fiber ring structure

In the investigation, we propose and demonstrate a Sagnac ring based fiber laser structure using a semiconductor optical amplifier (SOA) to act as a gain medium with short to long fiber cavity lengths for wavelength lasing and tuning. Here, ten fiber Bragg gratings (FBGs) with different reflected Bragg wave-lengths are used serving as the reflected element in the proposed laser configuration for wavelength lasing and remote sensing simultaneously. Furthermore, the different cavity fiber lengths of a few ten m to 25 km, which are used in the proposed laser scheme, has been analyzed and discussed.     

半导体微结构物理效应及其应用讲座第1讲布拉格衍射效应在半导体光电子器件中的应用与发展

文章对布拉格衍射效应在半导体光电子材料和光电子器件，特别是在光纤通信中的光电子器件的应用和发展进行了详细的介绍．文中以布拉格光栅衍射效应的光反馈和选模功能为主线，逐一介绍了X射线双晶布拉格衍射技术在半导体材料、特别是在量子阱和应变量子阱超薄层晶体生长和质量控制方面的作用，介绍了内建布拉格光栅对光通信用光信号源的发展所起的重要作用，波导光栅在复用和解复用过程中的作用，以及光纤布拉格光栅在全光纤通信系统中的应用及发展等．     

基于级联光纤光栅的双模外腔半导体激光器的实验研究

实现了使用两个级联的光纤Bragg光栅的外腔半导体激光器的双模运转.两个模的峰值波长取决于光纤Bragg光栅的峰值反射波长,分别为1531.5nm与1549.4nm.注入电流为53mA时,两模峰值功率达到均衡为0.5mW,边模抑制比为27dB.