Green method for efficient PdNPs deposition on carbon carrier in the microreactor system

The synthesis of palladium nanoparticles and conditions of their deposition on active carbon fibers in the microreactor was described. All processes related with metal ion reduction, nucleation, and autocatalytic growth of particles as well as their deposition were carried out in the microreactor in only one cycle. Synthesis of palladium nanoparticles was carried out under different conditions, i.e., changing the initial concentration of metal ions and the reductant, at 40 °C. Depending on the conditions imposed, the nanoparticles of different size (hydrodynamic radius change from 12 to 37 nm) and shape (spherical, cube, pyramid) were obtained. It was also shown that flow conditions allow for much more efficient Pd deposition on active carbon fibers than the process carried out in the batch. It was observed that for concentrations of Pd(II) ions higher than 0.2 mM, the degree of fiber surface coverage increased significantly in comparison with the batch process.     

Characterisation of Sonochemically Produced PdO Nanoparticles by X‐ray Absorption Near Edge Structure Spectroscopy

Brij‐35 [polyoxyethylene(23) lauryl ether] stabilised palladium nanoparticles, obtained on attempted sonochemical reduction of PdCl₂ by sodium sulfite in water under Argon, instantaneously oxidized to PdO. The particles obtained were stable and have narrow size distribution with an average size of 10 nm diameter. PdO nanoparticles were reduced to Pd nanoparticles in an autoclave by treatment with 50 bar hydrogen at 140 °C. The catalytic behaviour of Pd nanoparticles, thus obtained, is unusual in comparison with conventional Pd catalysts. The nanoparticles were characterized by UV‐Vis spectroscopy, TEM and their X‐ray Absorption Near Edge Structure (XANES) at the Pd‐L‐III edge.     

利用紫外-可见光谱研究水溶液中银纳米盘的生长过程及稳定性

在水相体系中以柠檬酸钠和硝酸银为反应物,利用可见光诱导的还原过程在室温下制备盘状的银纳米粒子,通过紫外-可见光谱监控了不同反应条件下银纳米粒子的生长过程及体系的稳定性．吸收光谱随时间的变化表明,在一定的反应条件下早期的产物为球形粒子;随着反应时间延长盘状产物开始逐渐生成并长大,球形粒子数也进一步增加;而到了后期盘状粒子则通过粒子间的Ostwald熟化过程进一步长大．研究还发现,过量的柠檬酸根离子无助于稳定胶态体系,而适量的PVP(聚乙烯吡咯烷酮)的加入则能起到有效的稳定作用;严格控制的搅拌对于保证体系良好的分散稳定性不可缺少．进一步的研究还表明,在反应体系中引入大量的氢氧根离子能大大的加快反应速度．     

Morphology control of the fabricated hydrophobic gold nanostructures in W/O microemulsion under microwave irradiation

The hydrophobic gold nanostructures with different shapes were prepared by using n-butanol situ reduction in cetyltrimethylammonium bromide (CTAB)/n-butanol/n-heptane/HAuCl₄(aq) W/O microemulsion through microwave dielectric heating. The CTAB-stabilized gold nanoparticles and nanowires with a networked structure obtained through this method were characterized and analyzed by ultraviolet visible spectroscopy (UV-vis), transmission electron microscopy (TEM) and X-ray diffraction (XRD), respectively. The morphologies of the hydrophobic gold nanocrystals were successfully controlled through the adjustment of molar ratios of CTAB/HAuCl₄ in the reverse microemulsion. The formation mechanism of anisotropic gold nanostructures was discussed, which demonstrated that CTAB played an important role in forming and stabilizing the shape of gold nanowires.     

Heterogeneous nucleation and growth of silver nanoparticles on unmodified polystyrene spheres by in situ reduction

The in situ reduction growth of Ag nanoparticles (NPs) on unmodified polystyrene (PS) spheres is investigated via controlling Ag nucleation and growth rates by continuous dripping addition of reductant solution in the absence of surfactants. The sub-micro PS spheres were coated by a uniform coverage of Ag NPs with several shapes like elongated islands, spherical particles, and particle aggregates. The reaction temperature and reductant concentration are demonstrated to influence the crystal structure, distribution, and stability of the Ag NPs on the PS substrates. The heterogeneous nucleation and growth of Ag NPs on PS spheres are found to depend on the inhibition of in-solution reduction and homogeneous nucleation.     

Ultrasonic-assisted synthesis of two dimensional coral-like Pd nanosheets supported on reduced graphene oxide for enhanced electrocatalytic performance

Two dimensional (2D) Pd nanosheets supported on reduced graphene oxide (Pd/rGO) were prepared through a sonochemical routine induced by cetyltrimethylammonium bromide (CTAB). Coral-like porous Pd nanosheets (Pd/rGO-u) were obtained under the sonication condition (25 kHz, 600 W, ultrasonic transducer), while square Pd nanosheets (Pd/rGO-c) were produced via traditional chemical reduction. The size of Pd nanosheets of Pd/rGO-u and Pd/rGO-c are 69.7 nm and 59.7 nm, and the thickness are 4.6 nm and 4.4 nm, respectively. The carrier GO was proved to be partially reduced to rGO with good electrical conductivity and oxygen-containing groups facilitated a good dispersion of Pd nanosheets. The interaction between GO and CTAB made the alkyl chain assembles to a 2D lamella micelles which limit the growth of Pd atoms resulting in the formation of 2D nanosheets. A high ultrasonic power promotes the reduction and the formation of porous structure. Additionally, Pd/rGO-u exhibited a favorable electrocatalytic performance toward oxygen reduction reaction (ORR) in alkaline condition, which provided a potential synthetic strategy assisted by sonication for high-performance 2D materials.     

Self-organization of bimetallic PdAu nanoparticles on SiO<Subscript>2</Subscript> surface

Bimetallic PdAu nanoparticles on SiO₂ substrate were produced by a sequential room-temperature sputtering deposition method. By the atomic force microscopy technique we studied the nanoparticles self-organization mechanisms in various conditions. First, Pd nucleation and growth proceeds at the substrate defects and the Pd nanoparticles density increase rapidly. During the second sputtering deposition, Au atoms adsorb on the SiO₂ and diffuse toward Pd nanoparticles without forming new nuclei. The Au atoms are trapped by the preformed Pd nanoparticles, forming PdAu bimetallic nanoparticles which size increases. Furthermore, fixing the amount of deposited Pd and increasing the amount of deposited Au, we analyzed the evolution of the PdAu film surface morphology: we observe that the PdAu grows initially as three-dimensional islands; then the PdAu film morphology evolves from compact three-dimensional islands to partially coalesced worm-like structures, followed by a percolation morphology and finally to a continuous and rough film. The application of the interrupted coalescence model allowed us to evaluate the critical mean island diameter R _c ≈ 2.8 nm for the partial coalescence process. The application of the dynamic scaling theory of growing interfaces allowed us to evaluate the dynamic growth exponent β = 0.21 ± 0.01 from the evolution of the film surface roughness. Finally, fixing the amount of deposited Pd and Au we studied the self-organization mechanism of the PdAu nanoparticles induced by thermal processes performed in the 973–1173 K temperature range. The observed kinetic growth mechanism is consistent with a surface diffusion-limited ripening of the nanoparticles with a temperature-dependent growth exponent. The dependence of the growth exponent on the temperature is supposed to be linked to the variation with the temperature of the characteristics of the PdAu alloy. The activation energy for the surface diffusion process was evaluated in 0.54 ± 0.03 eV.     

Fabrication of the stable adduct CdS/CTAB/Clay with sandwich-like nanostructures

The ordered multilayer adducts have been synthesized by electrostatic self-assembly between exfoliated sodium montmorillonite nanoplatelets and substituted CdS/CTAB cationic polyelectrolytes, in which sodium montmorillonite particles are exfoliated by means of extensive swelling and CdS/CTAB polyelectrolytes are obtained by sonicating CdS nanoparticles in CTAB water suspension. The build-up of the stable adducts with sandwich-like nanostructures has been demonstrated by X-ray diffraction (XRD) pattern. TEM cross-sectional images indicate that the nanocomposites are aligned parallel to form ordered structures. And UV–Vis and PL spectra show the presence of the inorganic functional components. It may be predicted that this self-assembly technique can be generalized to prepare other sandwich-like nanocomposites with desired optical, electro-optical, electronic, catalytic and magnetic properties.     

Facile synthesis of labile gold nanodiscs by the Turkevich method

The Turkevich method has been the preferred one for synthesis of gold nanoparticles (AuNPs), owing to its apparent simplicity and facility of replacing the citrate ions on the particle surface by molecules exhibiting different functionalities. Using the most common procedure labile spherical nanoparticles are usually obtained by this method. Here, by using factorial design of experiments, we demonstrated that gold nanodiscs (AuNDs) with short aspect ratio can be generated by the Turkevich method when Au:citrate ratio is 1:1. In comparison with the CTAB capped gold nanorods (AuNR), the citrate stabilized AuNDs exhibited a more labile character, allowing fast ligand exchange reactions and easy functionalization of the nanoparticle surface. In the presence of 4-mercaptopyridine (4-mpy), the surface enhancement Raman scattering effect was 100 and 1000 times higher than the one observed for CTAB-AuNR and spherical AuNPs, respectively, increasing the 4-mpy detection limit to 2.5 × 10^?9 molL^?1.     

Direct synthesis of graphene nanosheets support Pd nanodendrites for electrocatalytic formic acid oxidation

We report a solvothermal method preparation of dendritic Pd nanoparticles(DPNs) and spherical Pd nanoparticles(SPNs) supported on reduced graphene oxide(RGO). Drastically different morphologies of Pd NPs with nanodendritic structures or spherical structures were observed on graphene by controlling the reduction degree of graphene oxide(GO) under mild conditions. In addition to being a commonplace substrate, GO plays a more important role that relies on its surface groups, which serves as a shape-directing agent to direct the dendritic growth. As a result, the obtained DPNs/RGO catalyst exhibits a significantly enhanced electro-catalytic behavior for the oxidation of formic acid compared to the SPNs/RGO catalyst.     

XAS analysis of iron and palladium bonded to a polysaccharide produced anaerobically by a strain of Klebsiella oxytoca

Klebsiella oxytoca BAS‐10 ferments citrate to acetic acid and CO₂, and secretes a specific exopolysaccharide (EPS), which is able to bind different metallic species. These biomaterials may be used for different biotechnological purposes, including applications as innovative green biogenerated catalysts. In production of biogenerated Pd species, the Fe(III) as ferric citrate is added to anaerobic culture of K. oxytoca BAS‐10, in the presence of palladium species, to increase the EPS secretion and improve Pd‐EPS yield. In this process, bi‐metallic (FePd‐EPS) biomaterials were produced for the first time. The morphology of bi‐metallic EPS, and the chemical state of the two metals in the FePd‐EPS, are investigated by transmission electron microscopy, Fourier transform infra‐red spectroscopy, micro‐X‐ray fluorescence, and X‐ray absorption spectroscopy methods (XANES and EXAFS), and compared with mono‐metallic Pd‐EPS and Fe‐EPS complexes. Iron in FePd‐EPS is in the mineralized form of iron oxides/hydroxides, predominantly in the form of Fe³⁺, with a small amount of Fe²⁺ in the structure, most probably a mixture of different nano‐crystalline iron oxides and hydroxides, as in mono‐metallic Fe‐EPS. Palladium is found as Pd(0) in the form of metallic nanoparticles with face‐centred cubic structure in both bi‐metallic (FePd‐EPS) and mono‐metallic (Pd‐EPS) species. In bi‐metallic species, Pd and Fe nanoparticles agglomerate in larger clusters, but they remain spatially separated. The catalytic ability of bi‐metallic species (FePd‐EPS) in a hydrodechlorination reaction is improved in comparison with mono‐metallic Pd‐EPS.     

Synthesis of ZnO nanoparticles using nanosecond pulsed laser ablation in aqueous media and their self-assembly towards spindle-like ZnO aggregates

ZnO nanoparticles were fabricated by pulsed laser ablation (PLA) of a Zn metal in aqueous media, and aging effects on the morphology and photoluminescence properties of ZnO nanoparticles were investigated. The crystalline phase and particle morphology were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). It was found that small, well-defined ZnO nanoparticles were obtained by PLA of a Zn plate in aqueous media, and subsequent aging of the obtained ZnO nanoparticle suspension produced in cetyltrimethylammonium bromide (CTAB) solution led to the formation of spindle-like ZnO aggregates. However, in deionized water not the spindle-like ZnO aggregates but fluffy round aggregates were obtained. High-resolution transmission electron microscopic (HRTEM) observation indicated that the spindle-like ZnO aggregates were composed of many well-defined nanoparticles. Spindle-like aggregates exhibited strong exciton emission, while green emission could be suppressed via an aging process in the presence of CTAB. Moreover, thin films prepared by electrophoretic deposition (EPD) of ZnO nanoparticles after PLA in the presence of CTAB also possessed highly elongated aggregate structures that were possibly formed by surrounding the ZnO nanoparticles with double layers of CTAB molecules.     

Mono and bimetallic nanoparticles of gold,silver and palladium-catalyzed NADH oxidation-coupled reduction of Eosin-Y

Abstract  

Mono metallic (Au, Ag, Pd) and bimetallic (Au–Ag, Ag–Pd, Au–Pd) with 1:1 mol stoichiometry, nanoparticles are synthesized using one-pot, temperature controlled chemical method using cetyltrimethylammonium bromide (CTAB) as the capping agent. The particle sizes (Au = 5.6, Ag = 5.0, Pd = 6.0, Au–Ag = 9.2, Ag–Pd = 9.6, Au–Pd = 9.4 nm) are characterized by UV–Vis, HRTEM, and XRD measurements, respectively. CTAB bindings onto mono and bimetallic nanoparticles are analyzed by FTIR spectra. The catalytic activities of mono and bimetallic nanoparticles are tested on the reaction between NADH oxidation and Eosin-Y reduction. The effects of base, pH, ionic strength, nature of mono and bimetallic catalysts are studied and the reaction conditions are optimized. Bimetallic nanoparticles exhibited better catalysis than the mono metallic nanoparticles, which may be due to the electronic effects of the core to shell metal atoms.     

Preparation of functionalized platinum nanoparticles: a comparison of different methods and reagents

Au–Pd core–shell nanocubes and triangular nanoparticles were systematically synthesized from a few Pd layers up to fully grown morphologies by a modified seed-mediated growth method. The shape evolution of Au–Pd core–shell nanoparticles from single crystal and singly twinned seed to final concave nanocube and triangular plates are presented at atomic level by Cs-corrected scanning transmission electron microscopy (STEM). The growth mechanism of both morphologies was studied throughout different sizes. It was found that the concave nanocubes grew from octahedral Au seeds due to fast growth along 〈111〉 directions; while the triangular nanoparticles grew from singly twinned Au seeds, growing twice as fast in 〈110〉 directions along the twin boundary; compared to the 〈111〉 direction perpendicular to the twin boundary. Both the concave nanocubes and triangular nanoparticles presented high index facet (HIF) surfaces that will increase the catalytic activity of different reactions.     

Palladium nanoparticles on silica-rich substrates by spontaneous reduction at room temperature

Metallic palladium nanoparticles (<5 nm) have been spontaneously obtained from an acid solution of palladium chloride salt on silica-rich substrates (sepiolite, microfibrous silica, fumed silica, and milled silica glass) without any additional reduction treatment. Variable proportions of metallic palladium were straightforwardly obtained, depending on the nature of the substrate. The presence of a large amount of silanol groups acting as nucleation centers, seem to be a requisite to obtain small Pd nanoparticles. Additionally, an absorbance maximum associated to a surface plasmon resonance corresponding to the spherical particles of metallic palladium has been identified at a wavelength of 238 nm. The large specific surface of the employed substrates with the palladium nanoparticles suggest that these materials could be used for gas catalysis.     

Organic colloid method to prepare ultrafine cobalt nanoparticles with the size of 2 nm

Ultrafine Co nanoparticles with the size of ca. 2 nm were prepared by an organic colloid method, in which sodium formate acted as reducing agent, ethylene glycol acted as solvent, sodium citrate acted as both complexing agent and stabilizing agent, respectively. X-ray diffraction (XRD) analysis indicated that the as-prepared Co nanoparticles were in hexagonal close-packed phase, and transmission electron microscope (TEM) images revealed that the size of the well-dispersed Co nanoparticles was as small as 2 nm, and the sizes were distributed in a very narrow region. The hysteresis loop of the as-prepared Co sample measured at room temperature showed a superparamagnetic behavior due to the extremely small size of the products. It was revealed that sodium citrate played a crucial role in decreasing the particle size and narrowing the size distribution.     

Laser-induced growth and reformation of gold and silver nanoparticles

The sizes, shapes, and growth rates of gold and silver nanoparticles stabilized with polyvinylpyrrolidone in water can be controlled by using picosecond laser pulses. The nucleation of small metal clusters formed with NaBH₄ addition to produce nanoparticles takes two months with aging but 30 min with laser irradiation. Laser pulses can also induce nanoparticles to have narrow size and shape distribution or to undergo aggregation into much larger particles. The latter process is more likely found when the metal is silver or the irradiation wavelength is short. Laser-induced growth and shape transformation processes are explained in terms of BH₄ ⁻ depletion, metal fusion, and electron ejection followed by disintegration.     

Fabrication of Rh based solid-solution bimetallic alloy nanoparticles with fully-tunable composition through femtosecond laser irradiation in aqueous solution

Many late transition binary alloy nanoparticles (NPs) have been fabricated through a wide variety of techniques. Various steps are involved in the fabrication of such NPs. Here, we used a simple and green route to fabricate solid-solution Rh–Pd and Rh–Pt bimetallic alloy NPs through femtosecond laser irradiation in a solution without any chemicals like reducing agents. X-ray diffraction (XRD) peaks of NPs obtained in the solutions with different ratios of Rh–Pd and Rh–Pt ions monotonically varied from the position of pure Rh to those of Pd and to Pt which respectively indicated that these NPs were alloy. Composition of fabricated NPs was fully tuned over the entire range of Rh_1?x –Pd _x , and Rh_1?x –Pt _x with varying the mixing ratio of metal ions in the solution. Studies of Rh–Pd and Rh–Pt solid-solution system suggest that the alloy formation occurs through the nucleation of Rh and then followed by the diffusion of Rh, Pd and Rh, Pt to form a homogeneous alloy. The variety of average size of the alloy NPs for different compositions could be attributed to different reduction rate and surface energies of metal ions. Our result implies that femtosecond laser irradiation in aqueous solution is one of the potential methodologies to form multimetallic solid-solution alloy NPs with fully tunable composition.     

Diameter and location control of ZnO nanowires using electrodeposition and sodium citrate

We report single-step growth of spatially localized ZnO nanowires of controlled diameter to enable improved performance of piezoelectric devices such as nanogenerators. This study is the first to demonstrate the combination of electrodeposition with zinc nitrate and sodium citrate in the growth solution. Electrodeposition through a thermally-grown silicon oxide mask results in localization, while the growth voltage and solution chemistry are tuned to control the nanowire geometry. We observe a competition between lateral (relative to the (0001) axis) citrate-related morphology and voltage-driven vertical growth which enables this control. High aspect ratios result with either pure nitrate or nitrate-citrate mixtures if large voltages are used, but low growth voltages permit the growth of large diameter nanowires in solution with citrate. Measurements of the current density suggest a two-step growth process. An oxide mask blocks the electrodeposition, and suppresses nucleation of thermally driven growth, permitting single-step lithography on low cost p-type silicon substrates.     

Preparation of AgBr Nanoparticles in Microemulsions Via Reaction of AgNO<Subscript>3</Subscript> with CTAB Counterion

Nanoparticles of AgBr were prepared by precipitating AgBr in the water pools of microemulsions consisting of CTAB, n-butanol, isooctane and water. An aqueous solution of AgNO₃ added to the microemulsion was the source of Ag⁺ ions. The formation of AgBr nanoparticles in microemulsions through direct reaction with the surfactant counterion is a novel approach aimed at decreasing the role of intermicellar nucleation on nanoparticle formation for rapid reactions. The availability of the surfactant counterion in every reverse micelle and the rapidity of the reaction with the counterion trigger nucleation within individual reverse micelles. The effect of the following variables on the particle size and size distribution was investigated: the surfactant and cosurfactant concentrations, moles of AgNO₃ added, and water to surfactant mole ratio, R. High concentration of the surfactant or cosurfactant, or high water content of the microemulsion favored intermicellar nucleation and resulted in the formation of large particles with broad size distribution, while high amounts of AgNO₃ favored nucleation within individual micelles and resulted in small nanoparticles with narrow size distribution. A blue shift in the UV absorption threshold corresponding to a decrease in the particle size was generally observed. Notably, the variation of the absorption peak size with the nanoparticle size was opposite to those reported by us in previous studies using different surfactants.