Research on preparing compact bulk nanocomposite Nd2Fe14B/α-Fe magnetic materials by hot extrusion

In this paper, compact bulk nanocomposite Nd₂Fe₁₄B/α-Fe magnetic materials were prepared by hot extrusion of amorphous and nanocrystalline powders, which were prepared by high-energy ball-milling (HEBM) of the Nd₂Fe₁₄ B-type hard magnetic phase with 20 vol% of α-Fe as soft magnetic phase. The extrusion temperature has important influence on magnetic properties and microstructure of magnetic materials. The results show that the grain size of Nd₂Fe₁₄B and α-Fe phase increases steadily with increasing extrusion temperature. Furthermore, optimal extrusion temperature of 1223 K occurs, at which the highest magnetic properties and relative density can be obtained.     

Magnetic and structural properties of the Nd2(Fe100−x Nb x )14B system prepared by arc melting

In this work the magnetic and structural properties are investigated by Mössbauer spectrometry, Vibrating Sample Magnetometry and X-ray diffraction of Nd₂(Fe_100?x Nb _x )₁₄B powdered alloys with x?=?0, 2 and 4 prepared by arc melting. The Mössbauer spectra of the samples were fitted with several contributions from: Nd₂Fe₁₄B, α-Fe and a paramagnetic phase associated with Nd_1.1Fe₄B₄ for x?=?0 and additionally from NbFeB and Nd₂Fe₁₇ for x?=?2 and x?=?4. The relative fractions of α-Fe and Nd₂Fe₁₄B are smaller for x?=?4 than for x?=?0, indicating that the amount of these two phases is reduced with increasing Nb content, while the relative fraction of Nd₂Fe₁₇ increases. The α-Fe grain size slightly decreases while that of the Nd₂Fe₁₄B phase is increasing, when the Nb content increases. The hysteresis loops indicate that these samples behave as hard ferromagnets, with a coercive field which decreases when the Nb content increases, but with rather low remanent magnetization.     

Mössbauer study of intergranular phase in Nd 8 Fe86 − x Nb x B6(x = 0, 1, 2, 3) nanocomposite magnet

Nd₈Fe_86???x Nb _x B₆ (x = 0, 1, 2, 3) nanocomposite magnet has been studied by Mössbauer spectroscopy and nanostructure observation. It was found that intergranular phase formed between α-Fe and Nd₂Fe₁₄B phase in NdFeNbB alloys plays a significant role on the magnetic properties. By the addition of Nb into Nd₈Fe₈₆B₆ composition, coercivity was found to increase by 25% due to the grain refinement of both the soft and hard magnetic phases which was decreased from 50 nm of virgin Nd₈Fe₈₆B₆ to 25 nm in Nd₈Fe₈₅Nb₁B₆ alloys. The role of Nb addition was confirmed to stabilize the Nd₂Fe₁₄B lattice preventing from thermal vibration of the corresponding sites at where Fe atoms are substituted by Nb in the Nd₂Fe₁₄B lattice. The enhanced coercivity was originated from the exchange hardening of soft and amorphous phases surrounding the hard magnetic Nd₂Fe₁₄B crystal.     

Synthesis, structural and magnetic properties of the nanocomposite Fe63B23Nd7Y3Nb3Cr1 magnets

The Fe₆₃B₂₃Nd₇Y₃Nb₃Cr₁ nanocomposite magnets in the form of sheets have been prepared by copper mold casting technique. The phase evolution, crystal structure, microstructural and magnetic properties have been investigated in the as-cast and annealed states. The as-cast sheets show magnetically soft behaviors which become magnetically hard by thermal annealing. The optimal annealed microstructure was composed of nanosize soft magnetic α-Fe (19-29 nm) and hard magnetic Nd₂Fe₁₄B (45-55 nm) grains. The best hard magnetic properties such as intrinsic coercivity, _jH_c of 1119 kA/m, remanence, B_r of 0.44 T, magnetic induction to saturation magnetization ratio, M_r/M_s=0.61 and maximum energy product, (BH)_max of 55 kJ/m³ was obtained after annealing at 680 °C for 15 min. The annealing treatment above 680 °C results in non-ideal phase grains growth, which degrade the magnetic properties.     

相分布和晶粒尺寸对Nd2Fe14B/ɑ-Fe纳米复合永磁材料矫顽力的影响

本文采用统计平均方法研究了软、硬磁性晶粒尺寸及相分布对Nd2Fe14B/α-Fe纳米复合永磁材料矫顽力的影响。计算结果表明：对于单相纳米硬磁材料，磁体矫顽力随着硬磁性晶粒尺寸的减小而降低；对于软、硬两磁性相组成的Nd2Fe14B/a-Fe纳米复合永磁材料，两相的随机分布将导致磁体矫顽力随硬磁性晶粒尺寸的减小呈现极大值。本文的计算结果还表明当硬磁性晶粒尺寸大于软磁性晶粒的最佳尺寸时(15nm)，具有多层膜结构的Nd2Fe14B/a-Fe纳米复合永磁材料将比两相随机分布时具有更大的矫顽力。     

Nd2Fe14B的价电子结构分析和磁性计算

应用固体与分子经验电子理论计算了Nd₂Fe₁₄B的价电子结构、磁矩和居里温度,计算结果与实验值相符.计算表明:该合金的磁性与3d磁电子数成正比.从Fe(c)晶位到Fe(k₂)晶位磁矩增加,其机理源于价电子、哑对电子和3d磁电子之间的转化,有78%的哑对电子和18%的3d共价电子转化成了磁电子.居里温度和磁矩与Fe原子配位数成正比,与加权等同键数I^σ成反比,Nd原子 关键词： 2Fe₁₄B')" href="#">Nd₂Fe₁₄B 价电子结构 居里温度     

Origin of anisotropy for the HDDR Nd13.5Fe79.5B7 magnetic powders

For the HDDR Nd_13.5Fe_79.5B₇ magnetic powders, effects of disproportionation time and hydrogen pressure on the anisotropy were studied during the slow desorption stage. Studies showed that shorter disproportionation times caused the magnetic powders displaying higher anisotropy. With increasing disproportionation times, the degree of crystallographic alignment decreased. This in turn caused a drop in remanence and anisotropic character. Longer disporportionation times have also been correlated to a change in disproportionated microstructure from lamella to columnar. XRD (X-Ray Diffraction) studies showed that except NdH₂,α-Fe and Fe₂B, no other phases were included in the disproportionation mixture. This elucidated that the strong anisotropy is only related to a lamella disproportionation microstructure, which corresponds to a short disproportionation times. The lamella disproportionation microstructure may remain or inherit the alignment of original Nd₂Fe₁₄B grain, and may also be related to the alignment of the newly formed Nd₂Fe₁₄B grain. Thus, the anisotropic formation mechanism of ternary magnetic powders accords with “anisotropy-mediating phase” model. If the disproportionation mixture were carried out an optimum hydrogen pressure treatment during the HDDR process, the degree of crystallographic alignment can be further enhanced.     

Magnetic properties enhancement of Nd2Fe14B/α-Fe nanocomposites by Ta substitution

Nanostructured Nd_9.5Fe_84−xB_6.5Ta_x (x=0, 0.5, 1, 1.5, and 2) ribbons composed of Nd₂Fe₁₄B and α-Fe phases with a high coercivity and maximum energy product are fabricated by direct melt spinning. The effects of Ta addition on the structures and magnetic properties of melt-spun Nd_9.5Fe_84−xB_6.5Ta_x (x=0, 0.5, 1, 1.5, and 2) ribbons have been investigated. Compared with addition-free ribbons, small addition of Ta is found to reduce the grain sizes of the samples and improve their magnetic properties due to a strong exchange coupling between the Nd₂Fe₁₄B hard phase and α-Fe soft phase. A coercive field of 750 kA/m and a maximum energy product of 158 kJ/m³ in melt-spun Nd_9.5Fe_82.5B_6.5Ta_1.5 ribbons are obtained at room temperature.     

Effect of Mn on the magnetic properties of Fe3B/Nd2Fe14B nanocomposites

The magnetic properties of Nd_4.5Fe_77−xMn_xB_18.5 (x=0, 1 and 2) nanocomposites prepared by the crystallization of amorphous precursors were investigated. Addition of Mn is found to decrease the crystallization temperature of the amorphous ribbons. The intrinsic coercivity _iH_c and maximum energy product (BH)_max increase from 2.6 kOe and 9.1 MGOe for x=0 to 3.1 kOe and 10.3 MGOe for x=1, respectively, and the remanence ratio M_r/M_s increases from 0.70 to 0.72. The effect of Mn on Curie temperature T_C and the thermal stability of M_r and _iH_c were also studied. ⁵⁷Fe Mössbauer spectra have been recorded for x=0, 1 and 2 ribbons at room temperature and site preference of the Mn atoms in Fe₃B and Nd₂Fe₁₄B phases is discussed using the Mössbauer spectroscopy.     

Effects of additives on hydrogen absorption and desorption characteristics of Nd(Fe,Mo)12 alloys

Effects of such additives as Co, Zr, Nb or Ga on hydrogen absorption and desorption characteristics of Nd(Fe,Mo)₁₂ alloys are investigated. It is found that Zr or Nb addition increases the disproportionation temperature of Nd(Fe,Mo)₁₂ alloys, and Co or Ga addition decreases the recombined temperature of its disproportionated products. This shows that Zr or Nb addition retards the disproportionation, while Co or Ga addition is effective for improving the recombination, which is similar to the effects of the additives on the hydrogen absorption and desorption characteristics of Nd₂Fe₁₄B alloys. However, according to X-ray diffraction (XRD) investigations for the magnetic-oriented samples, the final hydrogenation disproportiontation desorption recombination (HDDR) NdFe_10.5−XM_XMo_1.5 (M=Co, Zr, Nb or Ga) products are isotropic. The effects of additives on hydrogen absorption and desorption characteristics of Nd₂Fe₁₄B and Nd(Fe,Mo)₁₂ alloys are very similar, but the magnetic anisotropy of the final two HDDR products are different. In order to investigate this, similarities and differences of the two alloy systems and their corresponding HDDR phenomena are further studied. The results show that the formation of anisotropic powders may be related to the disproportionated products and crystal growth direction of the Nd₂Fe₁₄B and Nd(Fe,Mo)₁₂ system.     

Magnetic properties of Nd0.9Dy0.1Fe3(BO3)4

The magnetic properties of trigonal Nd_0.9Dy_0.1Fe₃(BO₃)₄ substituted compound with the competitive Nd-Fe and Dy-Fe exchange interactions have been investigated. It has been shown that in Nd_0.9Dy_0.1Fe₃(BO₃)₄ a spontaneous spin-reorientation transition from an ease-axis state to an easy-plane occurs near 8 K. Anomalies of the magnetization curves are observed in a spin-flop transition induced by the magnetic field B‖c. The calculations were performed using a molecular-field approximation and a crystal-field model for the rare-earth subsystem. Extensive experimental data on the magnetic properties of Nd_0.9Dy_0.1Fe₃(BO₃)₄ have been interpreted and good agreement between theory and experiment has been achieved using the obtained theoretical dependences.     

Volume dependence of electronic structure and magnetic properties of Fe16N2

Using first-principles calculations based on density functional theory, we investigated systematically the electronic structures and magnetic properties of Fe₁₆N₂ system and their unit cell volume dependence. It has been found that total magnetic moment increases as increasing unit cell volume of Fe₁₆N₂. In addition, it also has been found that the d electron number on Fe I, Fe II and Fe III atoms decreases as increasing unit cell volume and the local magnetic moment on Fe atoms increases with the decrease of d electron number. The present study provides a clear insight into the numerous conflicting experimental results on the magnetic properties of Fe₁₆N₂ system.     

Magnetic structure and preferential occupation of Fe in the composite compound Nd2Co6Fe

The crystal and magnetic structures of the composite compound Nd₂Co₆Fe have been investigated by high-resolution neutron powder diffraction and X-ray powder diffraction. The compound crystallizes in the hexagonal Ce₂Ni₇-type structure consisting of Nd(Co,Fe)₂ and Nd(Co,Fe)₅ structural blocks alternately stacked along the c-axis. Multi-pattern Rietveld refinement of neutron diffraction and X-ray diffraction data at room temperature reveal that substitution of Fe for Co occurs exclusively in the Nd(Co,Fe)₅ structural blocks. The preferential occupation of the Fe atoms in the structure is discussed based on the mixing enthalpy between Nd and Fe atoms and on the lattice distortions. In agreement with the reported magnetic phase diagram of the Nd₂Co_7−xFe_x compounds, magnetic structure models with the moments of all atoms in the ab plane at 300 K and along the c-axis at 450 K provide a satisfactory fitting to the experimental neutron diffraction data. The refinement results show that the atomic moments of (Co,Fe) atoms within the Nd(Co,Fe)₅ blocks decrease slightly with temperature, whereas the atomic moments of Nd in the compound and of (Co,Fe) atoms at the interface between the Nd(Co,Fe)₂ and Nd(Co,Fe)₅ blocks are reduced significantly.     

Effect of niobium on microstructure and magnetic properties of bulk anisotropic NdFeB/α-Fe nanocomposites

Bulk anisotropic NdFeB/α-Fe nano-composites were obtained directly from alloys of Nd₁₁Dy_0.5Fe_82.4−xNb_xB_6.1 (x=0,0.5,1.0,1.5). High resolution transmission electron microscopy images showed the existence of Nb-rich amorphous grain boundary phase in the alloys with Nb doped. Field emission scanning electron microscope morphologies and X-ray diffraction patterns revealed the grain size and grain alignment of hot pressed and hot deformed nanocomposites. It was found that Nb could refine the grain size and grain texture in hot worked ribbons. Vibrating sample magnetometer results showed that the magnetic properties of the anisotropic nanocomposites were improved with increased Nb doping. The remanence, coercivity and maximum energy product of the bulk anisotropic Nd₁₁Dy_0.5Fe_80.4Nb₂B_6.1 nanocomposites were 1.04 T, 563 kA/m and 146 kJ/m³, respectively.     

Crystallization of single-phase nanocrystalline Nd10.8Dy1.5Fe79.7(NbZrCu)2.0B6.0 ribbons

The crystallization of single-phase nanocrystalline Nd_10.8Dy_1.5Fe_79.7(NbZrCu)_2.0B_6.0 ribbons has been investigated. The as-spun ribbons are mainly composed of an amorphous matrix with a small amount of α-Fe, Nd₂Fe₁₄B and/or other crystallization phases. Cu-enriched clusters with different sizes have been found in the as-spun ribbons. These clusters almost disappear after crystallization, which can possess effects on the refinement of grains.     

Nano-sized disorders in hard magnetic grains and their influence on magnetization reversal at artificial Nd/Nd2Fe14B interfaces

We have investigated the effect of lattice disorders near the surface of hard magnetic Nd₂Fe₁₄B grains on coercivity using artificial interfaces created by sputter depositing Nd on polished surface of Nd-Fe-B sintered magnets. The interfacial structure was manipulated by annealing the coated samples at 550 °C in vacuum with and without Ta cap. Nano-beam electron diffraction revealed a few nm thick disordered layer within the Nd₂Fe₁₄B phase at the Nd/Nd₂Fe₁₄B interface of a low coercivity sample, while a high coercivity sample showed a well-defined crystal structure of Nd₂Fe₁₄B near the NdO_x/Nd₂Fe₁₄B interface.     

Effect of element substitution on nanostructure and hard magnetism of rapidly quenched Nd2Fe14B

The structural and magnetic properties of Nd₁₂Fe₈₂B₆ and Nd₁₀M₂Fe₈₂B₆ (M = Nb, Ti, Zr, Cr) alloys prepared using arc melting and melt spinning have been investigated. All the samples are found to crystallise with a tetragonal Nd₂Fe₁₄B phase without any alloy or elemental impurities. There is a small decrease in the unit cell volume of Nd₂Fe₁₄B due to transition metal (M) addition. The substitution of Nb and Ti refines and homogenises the nanostructure of the alloys, promoting intergrain exchange coupling leading to an increase in the remanence and energy product. For example, the remanence and energy product of Nd₁₂Fe₈₂B₆ and Nd₁₀Nb₂Fe₈₂B₆ are 8.4 kG and 15 MGOe, and 9.9 kG and 20 MGOe, respectively. The J(T) curves are similar to those of a single phase ferromagnetic material suggesting no segregation of ferromagnetic impurities. The observed structural and magnetic properties are consistent with the fact that the substitutional transition metal atoms occupy the Nd site of the tetragonal Nd₂Fe₁₄B crystal lattice. The improvement of magnetic properties of nanocrystalline Nd₂Fe₁₄B alloys with the decrease in Nd concentration may be beneficial for the application of this material in bonded magnets.     

Si对Nd2Fe14B四方相结构和磁性的影响

本文对Si加入Nd₂Fe₁₄B四方相后所形成的合金相的结构和磁性进行了研究。结果表明,Si加入Nd₂Fe₁₄B四方相后并不破坏它的结构(Si的含量可达B的两倍),而形成Nd₂(Fe,Si)₁₄B赝三元金属间化合物。随着Si含量的增加,晶格常数和饱和磁化强度随之减小,但居里温度则随之增加。Si的加入,并不改变Nd₂Fe₁₄B的室温各向 关键词：     

Effects of Nb substitution for Zr on the phases,microstructure and magnetic properties of Co80Zr18−xNbxB2 melt-spun ribbons

The phases, microstructure, and magnetic properties of Co₈₀Zr_18−xNb_xB₂ (x=1, 2, 3, and 4) melt-spun ribbons were investigated. The small substitution of Nb for Zr in the Co–Zr–B melt-spun ribbons resulted in the improvement of magnetic properties, especially the coercivity. The main effect of added Nb on the coercovity of Co–Zr–Nb–B melt-spun ribbons, originated from modification of the grain size of Co₁₁Zr₂ phase. The coercivity of the Co–Zr–Nb–B melt-spun ribbons depends on the annealing temperature. The optimal magnetic properties of H_c=5.1 kOe, and (BH)_max=3.4 MGOe were obtained in the Co₈₀Zr₁₅Nb₃B₂ melt-spun ribbons annealed at 600 °C for 3 min.     

取向Pr2Fe14B与Nd2Fe14B多晶磁化曲线的 计算

基于单离子晶场模型,提出了计算稀土-Fe(Co)金属间化合物取向多晶样品磁化曲线的方法.用此方法计算了取向Pr₂Fe₁₄B和Nd₂Fe₁₄ B多晶的高场磁化曲线,计算中使用了拟合化合物单晶磁化曲线得到的交换场与晶场参数.计 算曲线与实验曲线相符合. 关键词： 磁化曲线 晶场 2Fe₁₄B')" href="#">R₂Fe₁₄B